UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 1 Model: ACC98WK For service/ support Call: Toll Free Number 1-800-243-0000 © Copyright 2008, LG Electronics U.S.A., Inc. http://us.lgservice.com UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This epuipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the product and receiver. · Connect the product into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. - Labelling information: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. - RF Exposure Statement: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any antenna or transmitter other than those contained in this device. FCC COMPLIANCE: The responsible party for this product's compliance is: Marketed and Distributed by LG Electronics U.S.A., Inc., 1000 Sylvan Avenue, Englewood Cliffs, NJ. Phone: 1-201-816-2000. FCC Regulations Part 15 Declaration of Conformity (DoC) LG Corporation declares that the equipment described in this document is within the requirements of the Code of Federal Regulations listed below: Title 47 Part 15, Subpart B, Class B for a digital device. This declaration is based upon the compliance of the Audio data transceiver to the above standards. LG has determined that the models listed have been shown to comply with the applicable technical standards if no unauthorized change is made in the equipment and if the equipment is properly maintained and operated. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 2 UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 3 IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1. 2. 3. 4. 5. 6. 7. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE `STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 4 Welcome to your new Wireless Kit Contents Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 LED indicator of Wireless Transmitter . . . . . . . . . . . . .7 LED indicator of Wireless Receiver . . . . . . . . . . . . . .7 Setting an ID of Wireless Transmitter . . . . . . . . . . . . .7 CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord Most appliances should be placed on a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the unit, unplug the unit from the outlet. When installing the product, ensure that the plug is easily accessible. Specifications Wireless Transmitter External dimensions (WxHxD) Net Weight Transmission Power Supply Wireless Receiver Power requirements Power consumption External dimensions (WxHxD) Net Weight Reception Output Amplifier 120V ~ 60Hz 50W 64x213.6x252.3 mm 1.2 kg 2.4 GHz 155 W + 155 W 52.8x110.5x140 mm. 0.14 kg 2.4 GHz DC 7.5V max Designs and specifications are subject to change without pior notice. 4 UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 5 Setting up Attaching the speakers to the Wireless Receiver a b Connect the power cord of the Wireless Receiver to the outlet. Connect the wires to the Wireless Receiver. Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cable. b Attaching the Wireless Transmitter to the DVD receiver a b Connect the adaptor to the outlet and transmitter. Connect the SOUND SIGNAL connector of the Wireless Transmitter and rear (right, left) speaker of the main set with the sound signal cable. Connect the Ground cable to the DVD receiver. Be sure to connect the ground cable to the rear panel of the unit by using the screw in rear panel. If this is not connected, the wireless system will be come noise. a c b c a b a 5 UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 6 Setting up Be careful of the following · Set the distance between this unit and Wireless Receiver within 10m. · Optimum performance can be implemented only when the Wireless Transmitter and the Wireless Receiver within distance of 2m to 10m is used since communication failure may occur if longer distance is used. · Be sure to match the speaker cable to the appropriate terminal on the components: + to + and ­ to ­. If the cables are reversed, the sound will be distorted and will lack bass. · It takes a few seconds (and may take longer) for the Wireless Transmitter and Wireless Receiver to communicate with each other. · When the unit is turned off, the Wireless Transmitter is in standby mode (off) automatically after about 10 seconds. · If the Wireless Transmitter is turned off, the Wireless Receiver will not function. About Ferrite Core (for EMI only) (optional) Be sure to attach the ferrite core to the speaker cables (for connecting to this unit). This ferrite core can reduce noises. How to attach the ferrite core (optional) 1 Press the stopper [a] of the ferrite core to open. 2 Wind the cable once on the ferrite core. Attach the ferrite core near the unit (Refer to the fig.3 and comment.). 3 Close the ferrite core until it clicks. (fig.3) The length here is as short as possible. 6 UW93_DUSALL_ENG_2913 4/18/08 11:41 AM Page 7 LED indicator of Wireless Transmitter LED color BLUE RED OFF (No display) Setting an ID of Wireless Transmitter When the unit is manufactured, the ID is already set. If an interference occurs or you use a new Wireless Receiver, an ID is set again. Operation The main set is turned on, everything is connected and transmitting. The wireless transmitter is in standby mode. The adaptor is disconnected to the outlet. ON Wireless Kit 1 Connect the SOUND SIGNAL connector of transmitter and the rear (right, left) speaker terminals of main unit with the SOUND SIGNAL cable.: 2 Connect the adaptor to the outlet and transmitter.: 3 Turn off the Wireless Receiver: 4 Press ...