Upright refrigerator with BioFresh compartment Operating and installation instructions 280809 7084440 - 01 SKBes/SKB/KB/KBes 31/36/42 ... 6 Appliance at a glance Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 2 3 3.1 3.2 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 5 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2 6.3 7 8 8.1 8.2 9 Appliance at a glance............................................ Range of appliance use............................................ Conformity................................................................ Description of appliance and equipment.................. External dimensions of the appliance....................... Saving energy.......................................................... HomeDialog............................................................. General safety information................................... Controls and displays........................................... Operating and control elements............................... Temperature display................................................. Putting into operation............................................ Changing over the door hinges................................ Insertion into a row of kitchen units........................... Transporting the appliance....................................... Installing the appliance............................................. Disposing of packaging............................................ Connecting the appliance......................................... Switching on the appliance....................................... 2 2 2 2 3 3 3 3 4 4 4 4 4 7 7 7 8 8 8 Note u Compliance with the ambient temperatures indicated is required, otherwise the cooling performance is reduced. Climate rating SN N ST T for ambient temperatures of 10 °C to 32 °C 16 °C to 32 °C 16 °C to 38 °C 16 °C to 43 °C 1.2 Conformity The refrigerant circuit has been tested for leaks. The appliance complies with current safety regulations and EC directives 2006/95/EC and 2004/108/EC. Control.................................................................... 8 Brightness of the temperature display...................... 8 Child proofing........................................................... 8 Door alarm................................................................ 8 Refrigerator compartment........................................ 8 BioFresh compartment............................................. 10 Maintenance........................................................... Cleaning the appliance............................................. Changing the interior light with bulb.......................... Customer service..................................................... 11 11 12 12 1.3 Description of appliance and equipment Malfunction............................................................. 12 Decommissioning.................................................. 13 Switching off the appliance....................................... 13 Taking the appliance out of service.......................... 13 Disposing of the appliance................................... 13 The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications. To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully. The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*). Instructions for action are marked with a , the results of action are marked with a . 1 Appliance at a glance 1.1 Range of appliance use The appliance is suited only for cooling food. In the case of commercial food cooling, the pertinent statutory regulations have to be observed. The appliance is not suited for storing and cooling pharmaceuticals, blood plasma, laboratory preparations or similar substances and products subject to the Medical Devices Directive 2007/47/EC. Any misuse of the appliance may result in damage to or spoilage of the stored goods. Furthermore, the appliance is unsuited for use in areas exposed to an explosion hazard. The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate. Fig. 1 (1) Operating panel (2) Fan (3) Interior light, bulb* (4) Box shelves, removable (5) Glass shelves, relocatable (6) Interior light, LED* (7) Rack for tinned food, relocatable (8) Glass shelf, sectioned, relocatable (9) Bottle rack (10) Bottle shelf (11) BioFresh compartment, Drysafe (12) HydroSafe control (13) BioFresh compartment, Hydrosafe (14) HydroSafe control (15) BioFresh compartment, Hydrosafe (16) Height-adjustable foot (17) Type plate 2 General safety information 1.4 External dimensions of the appliance with physical, sensory or mental impairment or persons not having sufficient experience and knowledge, unless they are instructed in the use of the appliance and are initially supervised by a person responsible for their safety. Keep children under supervision to ensure they do not play with the appliance. - In case of a fault, pull out the mains plug (not by pulling the connecting cable) or switch off the fuse. - Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose. - When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable. - Install and connect the appliance only as instructed. - Please keep these instructions in a safe place and pass them on to any subsequent owners. Fire hazard: - The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite. · Do not damage the refrigerant circuit pipes. · Do not allow naked flames or ignition sources to enter the appliance. · Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.). · If refrigerant escapes: eliminate naked flames or sources of ignition from the vicinity. Pull out the power plug. Ventilate the area well. Notify customer service. - Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. Respective spray cans can be identified by reference to the contents printed on the can or by a flame symbol. Gases possibly escaping may ignite due to electrical components. - Do not place any burning candles, lamps or other items with naked flames on or in the appliance. - Only store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to electrical components. Danger of tipping and falling: - Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children. Danger of food poisoning: - Do not consume food which has been stored too long. Danger of frostbite, numbness and pain: - Avoid lasting skin contact with cold surfaces or refrigerated/ frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold. Please observe the specific information in the other sections: DANGER identifies a situation involving direct danger which, if not obviated, may result in death or severe bodily injury. identifies a dangerous situation which, if not obviated, may result in death or severe bodily injury. identifies a dangerous situation which, if not obviated, may result in minor or medium bodily injury. identifies a dangerous situation which, if not obviated, may result in damage to property. identifies useful information and tips. - This appliance is not designed for persons (including children) Fig. 2 Designation KB 31 KB 36 KB 42 H (mm) 1458 1655 1852 1.5 Saving energy Always pay attention to good ventilation. Keep the time the appliance is open to a minimum. Store food logically. First cool warm food to room temperature before storing it . Accumulated dust increases the energy consumption: - Once a year, dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance. - 1.6 HomeDialog The appliance can be provided with the retrofit modules for the HomeDialog system or the serial interface (RS 232), depending on model and equipment. The modules are available from your specialist dealer. You will find more information on the internet at www.liebherr.com. WARNING CAUTION NOTICE 2 General safety information Danger for the user: Note 3 Controls and displays 3 Controls and displays 3.1 Operating and control elements u Open the door. Fig. 4 Fig. 3 (1) Alarm button (2) SuperCool button (3) On/Off button (4) Alarm symbol (5) Menu symbol (6) Down setting button (7) Up setting button (8) Holiday button (9) Temperature display (10) HomeDialog symbol (11) SuperCool symbol (12) Child-proofing symbol NOTICE Risk of damage! If the door seal is damaged, the door may fail to close properly and the cooling will be inadequate. u Do not damage the door seal with the screwdriver! u Disengage and remove the faceplate Fig. 4 (1) using a flatblade screwdriver. w The faceplate is attached over the soft stop bracket. 3.2 Temperature display The following are displayed in normal operation: - the average cooling temperature The following displays indicate malfunction. Possible causes and corrective action (see Malfunction). - F0 to F9 4 Putting into operation 4.1 Changing over the door hinges You can change over the door hinges if necessary. NOTICE* Risk of damage to side-by-side appliances due to condensation! When a side-by-side appliance (S...) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered. u Do not change over the door hinges. Ensure that the following tools are to hand: q Torx 25 q Torx 15 q Screwdriver q Cordless screwdriver, if necessary q Second person for fitting work, if needed u Slide the faceplate forwards over the soft stop bracket Fig. 5 (5) in the direction of the appliance. u Snap the safety lock Fig. 5 (3) into the oblong hole. w The safety lock prevents the hinge from snap-closing. u Using a screwdriver, lift off the cover Fig. 5 (2) from the outside and remove it in an outward direction. u If necessary, tip the appliance backwards with the assistance of a second person. u Press the pin Fig. 5 (4) out from underneath. u Press the soft stop bracket Fig. 5 (5) towards the door. u Remove the faceplate Fig. 5 (1). u Unscrew the entire soft stop unit (2 Torx 15) Fig. 5 (6). u Pull the soft stop unit out a little, push it in the direction of the handle side and swing it out. u Set the soft stop unit aside. Fig. 5 4.1.2 Detaching the door Note u Remove any food from the door racks before removing the door, so that no food falls out. 4.1.1 Detaching the soft stop unit* For appliances with soft stop mechanism start with this point. For appliances without soft stop mechanism start with the point 'Detaching the door'. 4 Putting into operation u Tip the appliance back a little again and re-insert the bearing pin Fig. 8 (22). The notch has to point forwards. u Place the cover Fig. 7 (27) on the opposite side.* Fig. 8 Fig. 6 CAUTION Risk of injury if the door tips! u The safety lock (21) has to engage with the turn hinge at the side so that the bearing pin and therefore the door are secured. u u Close the door. u Pull off the cover Fig. 6 (10) forwards and upwards. u Lift off the cover Fig. 6 (11). CAUTION Risk of injury if the door tips! u Take good hold of the door. u Set down the door carefully. u Unscrew the upper turn hinge Fig. 6 (12)(2 Torx 25) Fig. 6 (13) and raise it for removal. u Lift up the door and set it aside. 4.1.3 Changing bearing parts* For appliances with soft stop mechanism.* u Snap the safety lock (21) onto the turn hinge again. u Put on the hinge bush Fig. 7 (20). 4.1.4 Changing bearing parts* For appliances without soft stop mechanism.* Draw the safety lock Fig. 7 (21) forwards for removal. Remove the cover Fig. 7 (27).* Turn the adjustable-height foot Fig. 7 (22) all the way in. If necessary, tip the appliance back a little with the assistance of a second person for removal of the bearing pin. u Pull out the bearing pin Fig. 7 (22) downwards and forwards. In so doing, pay attention to the hinge bush Fig. 7 (20). u Unscrew the turn hinge Fig. 7 (23)(3 Torx 25) Fig. 7 (24). u Carefully lift off and transfer the cover on the handle side u u u u Fig. 7 u u u u u u u u u Fig. 7 (25). u Screw the turn hinge Fig. 7 (23) firmly into place on the new hinge side using a cordless screwdriver. u Unscrew the bearing part Fig. 7 (26), turn it 180° and screw it down again. Draw the safety lock Fig. 9 (21) forwards for removal. Remove the cover Fig ...