Coding the Meter Code the meter before using it for the first time and every time you change to another vial of OneTouch® Ultra® Test Strips. CAUTION: Matching the code on the meter and the code on the test strip vial is essential to obtain accurate results. Each time you test, check to make sure the code numbers match. STEP 1 STEP 4 Code Meter. Apply Blood STEP 2 Select Test Mode. STEP 4 Fill Confirmation Window. Display Symbols and Messages WARNING Scroll up or down with Arrow button Meter is ready for testing. (Example) . Alternate Site Enter Code Mode. Test Summary Note: Before testing, wash hands with warm, soapy water. Rinse and dry thoroughly. Use Arrow button to select "Apply Blood" for fingertip sample or "Alternate Site" for forearm and palm samples. Do Not select Control Solution mode when testing blood. Failure to select correct test mode may cause blood glucose averages to be incorrect. Sep 8-02 10:30 am Be sure confirmation window is full before meter counts down. If window is not full before meter begins countdown, repeat test with new test strip. Do Not add more blood to the test strip; discard the test strip and retest. Code 1) New meter not coded. Code meter; or 2) Meter lost power briefly and entered Set-up mode. Reset code number. HIGH GLUCOSE Above 600 mg/dL Very high blood glucose level exceeding 600 mg/dL. --Check Code Sep 14-02 9:45 am mg/dL Check Ketones Comment? Press OK WARNING Error 1 Insert test strip to turn on meter. "OneTouch UltraSmart" will appear, followed by code number. STEP 2 STEP 5 414 35 Test result with suggestion to check ketone levels. Call customer service See Owner's Booklet See Code Number. STEP 1 Insert Test Strip. STEP 3 Apply Sample. 104 Accurate Results in Just 5 Seconds. WARNING: If mg/dL does not appear with the test result, call LifeScan Customer Service at 1 800 227-8862. (Example) Sep 14-02 9:30 am There may be a problem with meter. 1) Turn off meter. Enter Set-up mode. Reset meter before testing; or 2) Turn off meter. Enter Set-up mode. Reset language, date, time and meter code. If Error 1 message continues, Do Not use the meter. Call LifeScan Customer Service at 1 800 227-8862 for a replacement meter. LifeScan Customer Service toll-free numbers: English 1 800 227-8862 Español 1 800 381-7226 Visit the LifeScan Web site at: www.LifeScan.com mg/dL WARNING Error 2 Code number will appear on display. Push it all the way in until it will go no further. Meter turns on automatically. Touch and hold drop of blood to the narrow channel in the top edge of the test strip. (Example) mg/dL Test result is from 20 through 59 mg/dL with meal or snack reminder. Meter or strip problem Please repeat test See Owner's Booklet Do you need a snack? Used test strip inserted or problem with meter. Repeat test with new test strip. Comment? Press OK (Example) STEP 3 (Example) Match Code Numbers. WARNING WARNING Compare code number on meter display with code number on test strip vial. If matching, begin testing. If not matching, see Step 4. (Example) LOW GLUCOSE Below 20 mg/dL Blood glucose level lower than 20 mg/dL. Error 3 Meter not ready Please repeat test See Owner's Booklet Blood or control solution sample applied before "Apply Blood", "Alternate Site", or "Control Solution" appeared on display. Repeat test with new test strip. ©2006 LifeScan,Inc. Milpitas,CA 95035 Rev. date: 4/2006 AW 060-789-02A AW 06078902A Three possible reasons: 1) Possible high glucose in a test environment near low end of operating temperature range (43­111°F/6­44°C). Retest in a warmer environment. or 2) Sample improperly applied. Review blood application and repeat test with new test strip. or 3) Test strip damaged or moved during testing. Repeat test with new test strip. WARNING Low Batteries! + Adding Comment to Test Result Battery power getting low. Replace batteries as soon as possible. Sep 8-02 10:30 am Sep 8-02 10:30 am Gluc. 135 Comment Food Health Exer Save -------Stress Feel Hypo Illness Menses STEP 4 Add Comment. Basic Meter Set-Up STEP 1 Accessing Your Logbook To review test results in logbook memory, use FastFacts® . You should replace the batteries soon See Owner's Booklet Select comment from menu. Press with comment highlighted. Enter Set-Up Mode. STEP 1 WARNING Error 4 Strip problem Please repeat test See Owner's Booklet STEP 1 Complete Blood Test. WARNING Batteries! + 135 Battery power too low for testing. Replace batteries immediately. Comment? Press OK Start with test result on display. Sep 8-02 10:30 am Gluc. 135 Comment Press and hold down BOTH and buttons together for at least two seconds. STEP 5 Enter FastFacts® . Meter and Electronic Logbook In One Press FastFacts® SmartButton® . FastFacts® mg/dL Save Comment. Set up in? (Example) You MUST replace the batteries now See Owner's Booklet STEP 2 Press OK Button. Food Health 1 Health 2 Exer Save Bef Lunch Stress --------------- STEP 2 Select Display Language. FastFacts Logbook Glucose by Meals Glucose Analysis Insulin Intake Hypo Info Food Averages Health Checks Scroll to "Save". Press . English Español Francais Deutsch Italiano Português Nederlands To use English, press . To use another language, scroll to it with . Press . STEP 3 STEP 2 Select "Logbook" from Menu. . Press WARNING Meter is outside of operating temperature range WARNING Error 5 Invalid test Please repeat test See Owner's Booklet 1) Test strip damaged or confirmation window not full. Retest with new test strip. 2) There may be a problem with the meter. If the error message appears again, call LifeScan Customer Service at 1 800 277-8862. Test not possible See Owner's Booklet Temperature outside system operating range. Do Not perform a test until the meter and test strips reach a temperature within the operating range (43­111°F/6­44°C). Sep 8-02 10:30 am Gluc. 135 Comment Food You may add food, health, or exercise comment. Quick Reference Guide See inside for instructions on using OneTouch® UltraSmart®. Important: Before testing, read detailed instructions in your OneTouch® UltraSmart® Owner's Booklet. Making Logbook Entry Press SmartButton® for type of electronic logbook entry (exercise, health, medication, or food). Time Date Basic Set-up 12:00 am Sep 15-02 Set Date and Time. when Logbook Sep 8-02 10:30 am Glucose 125 mg/dL Bef Lunch Before Exer Scroll with and press each is correct. STEP 3 Scroll Back through Results. to scroll. Use STEP 3 Select Comment Type. STEP 4 Aft Brkft --------------- Complete Basic Meter Set-Up. Logbook Sep 15-02 Exercise Hard 3:30 pm 00:10 Health Exer Save Use to highlight type and press . Exercise SmartButton® Health SmartButton® Food SmartButton® Medication SmartButton® Do you want to customize your meter now? Yes No Select "No" and press . Basic meter Set-up is complete. Select "Yes" and press to customize other meter settings. See Owner's Booklet and next panel for details.* *Note: It is important that the time of day is correct and that your medication set-up and mealtimes are set according to your personal daily schedule. Otherwise, some FastFacts® information will not be correct. ...