User manual LINCOLN TOWN CAR 2004

Table of Contents Introduction Instrument Cluster Warning and control lights Gauges 4 10 10 15 Entertainment Systems AM/FM stereo cassette with CD CD changer Navigation system 17 17 21 25 Climate Controls Dual automatic temperature control Rear window defroster 88 88 91 Lights Headlamps Turn signal control Bulb replacement 92 92 95 96 Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control Message center 101 101 102 114 115 117 122 Locks and Security Locks Anti-theft system 130 130 141 1 Table of Contents Seating and Safety Restraints Seating Safety restraints Air bags Child restraints 146 146 151 165 172 Driving Starting Brakes Traction control Air suspension Transmission operation Vehicle loading Trailer towing Recreational towing 184 184 188 190 192 192 199 202 204 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Lug Nut Torque Jump starting Wrecker towing 206 206 207 207 208 216 222 222 227 Customer Assistance Reporting safety defects (U.S. only) 228 236 Cleaning 237 2 Table of Contents Maintenance and Specifications Engine compartment Engine oil Battery Fuel information Air filter(s) Tire Information Refill capacities Lubricant specifications 243 245 246 250 258 272 274 287 288 Accessories Index 296 298 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. Copyright © 2004 Ford Motor Company 3 Introduction CALIFORNIA Proposition 65 Warning WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CONGRATULATIONS Congratulations on acquiring your new Lincoln. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. For more information on Ford Motor Company and its products visit the following website: · In the United States: www.ford.com · In Canada: www.ford.ca · In Mexico: www.ford.com.mx · In Australia: www.ford.com.au Additional owner information is given in separate publications. This Owner's Guide describes every option and model variant available and therefore some of the items covered may not apply to your particular vehicle. Furthermore, due to printing cycles it may describe options before they are generally available. Remember to pass on the Owner's Guide when reselling the vehicle. It is an integral part of the vehicle. Fuel pump shut-off switch: In the event of an accident the safety switch will automatically cut off the fuel supply to the engine. The switch can also be activated through sudden vibration (e.g. collision when parking). To reset the switch, refer to the Fuel pump shut-off switch in the Roadside Emergencies chapter. 4 Introduction SAFETY AND ENVIRONMENT PROTECTION Warning symbols in this guide How can you reduce the risk of personal injury to yourself or others? In this guide, answers to such questions are contained in comments highlighted by the warning triangle symbol. These comments should be read and observed. Warning symbols on your vehicle When you see this symbol, it is imperative that you consult the relevant section of this guide before touching or attempting adjustment of any kind. Protecting the environment We must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps towards this aim. Information in this respect is highlighted in this guide with the tree symbol. BREAKING-IN YOUR VEHICLE Your vehicle does not need an extensive break-in. Try not to drive continuously at the same speed for the first 1,000 miles (1,600 km) of new vehicle operation. Vary your speed frequently in order to give the moving parts a chance to break in. Drive your new vehicle at least 500 miles (800 km) before towing a trailer. Do not add friction modifier compounds or special break-in oils during the first few thousand miles (kilometers) of operation, since these additives may prevent piston ring seating. See Engine oil in the Maintenance and Specifications chapter for more information on oil usage. 5 Introduction SPECIAL NOTICES Emission warranty The New Vehicle Limited Warranty includes Bumper-to-Bumper Coverage, Safety Restraint Coverage, Corrosion Coverage, and 6.0L Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible for Emissions Defect and Emissions Performance Warranties. For a detailed description of what is covered and what is not covered, refer to the Warranty Guide that is provided to you along with your Owner's Guide. Service Data Recording Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems. In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may access vehicle diagnostic information through a direct connection to your vehicle when diagnosing or servicing your vehicle. Event Data Recording Other modules in your vehicle -- event data recorders -- are capable of collecting and storing data during a crash or near crash event. The recorded information may assist in the investigation of such an event. The modules may record information about both the vehicle and the occupants, potentially including information such as: · how various systems in your vehicle were operating; · whether or not the driver and passenger seatbelts were buckled; · how far (if at all) the driver was depressing the accelerator and/or the brake pedal; · how fast the vehicle was traveling; and · where the driver was positioning the steering wheel. To access this information, special equipment must be directly connected to the recording modules. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, unless pursuant to court order or where required by law enforcement, other government authorities or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. 6 Introduction Special instructions For your added safety, your vehicle is fitted with sophisticated electronic controls. Please read the section Supplemental restraint system (SRS) in the Seating and Safety Restraints chapter. Failure to follow the specific warnings and instructions could result in personal injury. Front seat mounted rear-facing child or infant seats should NEVER be placed in front of an active passenger air bag. MIDDLE EAST/NORTH AFRICA VEHICLE SPECIFIC INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the ones that are described in this Owner's Guide; therefore, a supplement has been supplied that complements this book. By referring to the pages in the provided supplement, you can properly identify those features, recommendations and specifications that are unique to your vehicle. Refer to this Owner's Guide for all other required information and warnings. 7 Introduction These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner's Guide Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Installation Warning Child Seat Tether Anchor Anti-Lock Brake System Child Seat Child Seat Lower Anchor Brake System Brake Fluid Non-Petroleum Based AdvanceTrac Traction Control Master Lighting Switch Hazard Warning Flasher Fog Lamps-Front Fuse Compartment Fuel Pump Reset Windshield Defrost/Demist Windshield Wash/Wipe Rear Window Defrost/Demist 8 Introduction Vehicle Symbol Glossary Power Windows Front/Rear Child Safety Door Lock/Unlock Panic Alarm Engine Coolant Power Window Lockout Interior Luggage Compartment Release Symbol Engine Oil Engine Coolant Temperature Battery Do Not Open When Hot Avoid Smoking, Flames, or Sparks Explosive Gas Battery Acid Fan Warning Maintain Correct Fluid Level Engine Air Filter Jack MAX MIN Power Steering Fluid Emission System Passenger Compartment Air Filter Check fuel cap Low tire warning 9 Instrument Cluster WARNING LIGHTS AND CHIMES Warning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle's functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains on after starting the vehicle, have the respective system inspected immediately. Service engine soon: The Service SERVICE engine soon indicator light ENGINE illuminates when the ignition is first SOON turned to the ON position to check the bulb. Solid illumination after the engine is started indicates the On Board Diagnostics System (OBD-II) has detected a malfunction. Refer to On board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced immediately. Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire. 10 Instrument Cluster Check fuel cap: Illuminates when the fuel cap may not be properly installed. Continued driving with this light on may cause the Service engine soon warning light to come on. Refer to Fuel filler cap in the Maintenance and Specifications chapter. Brake system warning light: To confirm the brake system warning light is functional, it will momentarily illuminate when the ignition is turned to the ON position when the engine is not running, or in a position between ON and START, or by applying the parking brake when the ignition is turned to the ON position. If the brake system warning light does not illuminate at this time, seek service immediately from your dealership. Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately by your servicing dealership. Driving a vehicle with the brake system warning light on is dangerous. A significant decrease in braking performance may occur. It will take you longer to stop the vehicle. Have the vehicle checked by your dealer immediately. Anti-lock brake system: If the ABS light stays illuminated or ABS continues to flash, a malfunction has been detected, have the system serviced immediately. Normal braking is still functional unless the brake warning light also is illuminated. Air bag readiness: If this light fails AIR to illuminate when ignition is turned BAG to ON, continues to flash or remains on, have the system serviced immediately. A chime will also sound when a malfunction in the supplemental restraint system has been detected. 11 Instrument Cluster Safety belt: Reminds you to fasten your safety belt. A chime will also sound to remind you to fasten your safety belt, refer to the Seating and Safety Restraints chapter. Charging system: Illuminates when the battery is not charging properly. Engine oil pressure: Illuminates when the oil pressure falls below the normal range, refer to Engine oil in the Maintenance and Specifications chapter. Engine coolant temperature: Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as possible, switch off the engine and let cool. Refer to Engine coolant in the Maintenance and Specifications chapter. Never remove the coolant reservoir cap while the engine is running or hot. Autolamp: Illuminates when the autolamps are turned on. Traction control active: Flashes when the Traction control system is active. If the light remains on, have the system serviced immediately, refer to the Driving chapter for more information. 12 Instrument Cluster Air suspension: Illuminates when the air suspension is turned OFF or the air suspension system requires servicing. Washer: Illuminates when the windshield washer fluid is low. Speed control: Illuminates when the speed control is activated. Turns off when the speed control system is deactivated. O/D off: Illuminates when the overdrive function of the transmission has been turned OFF using the transmission control switch (TCS), refer to the Driving chapter. If the light flashes steadily or does not illuminate, have the transmission serviced soon, or damage may occur. Door ajar: Illuminates when any door is open (or not fully closed). 13 Instrument Cluster Trunk ajar: Illuminates when the trunk is not completely closed. This light will flash and sound a tone for one second, then the light remains on. Turn signal: Illuminates when the left or right turn signal or the hazard lights are turned on. If the indicators stay on or flash faster, check for a burned out bulb. High beams: Illuminates when the high beam headlamps are turned on. Headlamps on warning chime: Sounds when the headlamps or parking lamps are on, the ignition is off (the key is not in the ignition) and the driver's door is opened. Key-in-ignition warning chime: Sounds when the key is left in the ignition in the OFF/LOCK or ACCESSORY position and the driver's door is opened. Turn signal chime (if equipped): Sounds when the turn signal lever has been activated to signal a turn and not turned off after the vehicle is driven more than 0.8 km (1/2 mile). 14 Instrument Cluster GAUGES Speedometer: Indicates the current vehicle speed. Select SPEED from the message center to display the digital speedometer on the left hand side of the cluster. Refer to the Message Center in the Driver Controls chapter for more information on the Trip A and B feature. Engine coolant temperature gauge: Indicates engine coolant temperature. At normal operating temperature, the needle will be in the normal range (between "H" and "C"). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool. 15 Instrument Cluster Never remove the coolant reservoir cap while the engine is running or hot. Odometer: Registers the total miles (kilometers) of the vehicle. Fuel gauge: Indicates approximately how much fuel is left in the fuel tank (when the ignition is in the ON position). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. Refer to Filling the tank in the Maintenance and Specifications chapter for more information. The FUEL icon and arrow indicates which side of the vehicle the fuel door is located. 16 Entertainment Systems AUDIOPHILE AM/FM STEREO/CASSETTE/SINGLE CD 16 17 18 19 1 2 15 MUTE 3 14 13 AM/FM CD TAPE BASS TREB TUNE SCAN RDS DSP SEL BAL FADE 4 SEEK AUTO SET REW 1 FF 2 SIDE 3 4 COMP 5 SHUF 6 5 12 11 10 9 8 7 6 PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD 16 17 18 19 1 2 15 MUTE 3 14 13 AM/FM CD TAPE BASS TREB TUNE SCAN RDS SEL BAL FADE 4 SEEK AUTO SET REW 1 FF 2 SIDE 3 4 COMP 5 SHUF 6 5 12 11 10 9 8 7 6 17 Entertainment Systems 1. Eject: Press to eject a tape. 2. Eject: Press to eject a CD. 3. Bass: Allows you to increase or decrease the audio system's bass output. Press BASS then press SEL or increase the bass levels. to decrease Treble: Allows you to increase or decrease the audio system's treble output. Press TREB then press SEL or increase the treble levels. to decrease 4. Balance: Allows you to shift speaker sound between the right and left speakers. Press BAL then or right . press SEL to shift sound to the left Fade: Allows you to shift speaker sound between the front and rear speakers. Press FADE then press or the front SEL to shift the sound to the rear 5. COMP (Compression): In CD mode, press to bring soft and loud passages together for a more consistent listening level. SHUF (Shuffle): Press to play CD tracks in random order. 6. Select: Use to adjust bass, treble, balance and fade levels. 7. Side 1­2: Press to change sides on the tape. Dolby noise Dolby: reduction: Reduces tape noise and hiss; press to activate/deactivate. 18 . Entertainment Systems 8. REW (Rewind): Works in tape and CD modes. In tape mode, radio play continues until rewind is stopped (with the TAPE control) or the beginning of the tape is reached. In CD mode, REW control reverses the CD within the current track. FF (fast forward): Works in tape and CD modes. In the tape mode, tape direction automatically reverses when the end of the tape is reached. In CD mode, FF advances the CD within the current track. 9. Digital signal processing (if equipped): Press to adjust the occupancy modes between the following: · ALL SEATS · DRIVER SEAT · REAR SEATS RDS: (Radio Data System): Allows you to access FM stations which are RDS- equipped. Press RDS then SEL to select from: Traffic -- Allows you to receive traffic announcements and control their volume level. Traffic information is not available in most U.S. markets. Show -- Allows you to view the frequency and program type of the chosen radio station. The Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC) recommend that FM radio broadcasters use RDS technology to transmit information. FM radio stations are independently operated and individually elect to use RDS technology to transmit station ID and program type as desired. Setting the clock: Your vehicle is equipped with an in-dash mounted clock. Refer to Clock in the Driver Controls Chapter for further information. 19 Entertainment Systems 10. Autoset: Press to set first six strong stations into AM, FM1 or FM2 memory buttons; press again to return to normal stations. 11. Scan: Works in radio, tape and CD modes. Press SCAN for a brief sampling of radio stations, tape selections or CD tracks. 12. Seek: Works in radio, tape and CD modes. Press to access the or next listenable previous radio station, tape selection or CD track. 13. Tune: Works in radio mode. Press to manually advance up or down the frequency band. 14. AM/FM/CD: Press AM/FM to select a radio frequency. Press while in tape or CD mode to return to radio mode. Press CD to enter CD mode and to play a CD already in the system. 15. Mute mode: Press to mute the playing media. 16. Power/volume: Press to turn the system on/off. Turn to raise/lower the volume. 17. Tape: Press to play the tape. 18. CD door: Insert the disc with the playing side down and printed side up. 19. Tape door: Insert the tape facing the right. 20