User manual LINKSYS AS2TNC - PRODUCT BROCHURE

Improve the reception of your wireless devices! The best place to locate wireless network antennas is out of the way of any reflective or signal blocking obstacles such as furniture, cabinets, mirrors, or even people. The Linksys Antenna Stand allows you to relocate your wireless networking device's current antennas, or better yet, the Linksys High Gain Antennas, to a location with clearer signal paths to the other devices in your wireless network. The Antenna Stand can be mounted up to 6 feet away from the wireless device. It comes with mounting slots to attach it to the ceiling, high on a wall, or it can just stand on a tall bookcase or shelf. Note that although the Antenna Stand's cable and connectors cause some loss to the wireless signal, effective placement of the antennas above signal obstacles can easily create a net gain in wireless communications range and reliability. The two antenna connectors on the Antenna Stand support your wireless device's antenna diversity feature. This feature provides more reliable wireless communications by giving the device the ability to automatically choose whichever antenna is receiving the strongest signal. Increase your wireless network's range and reliability with the Linksys Antenna Stand. Relocate your antennas to avoid reflective or signal blocking obstacles Mounts on a desktop, wall, or ceiling Supports antenna diversity for reliability and range Wireless Antenna Stand for TNC Connectors Product Data Model No. AS2TNC Antenna Stand for TNC Connectors Features · Relocate your Wireless-B or Wireless-G Access Point's antennas to avoid obstacles and improve signal strength · Easy to install and use, no configuration necessary · 3-years limited warranty Specifications Model Number Connector Cable Length AS2TNC Two Reverse TNC, Two TNC 6 feet (152.4mm) Environmental Dimensions WxHxD Unit Weight Operating Temp. Storage Temp. 7.87" x 1.81" x 2.80" (200 mm x 46 mm x 71 mm) 7.58 oz. (0.22 kg) -4ºF to 149ºF (-20ºC to 65ºC) -22ºF to 167ºF (-30ºC to 75ºC) Operating Humidity 0% to 85% Non-Condensing Linksys A Division of Cisco Systems, Inc. 18582 Teller Avenue Irvine, CA 92612 USA E-mail: Web: sales@linksys.com support@linksys.com http://www.linksys.com Works With: · · · · · · WRT54GS WRT54G WAP54G BEFW11S4 WAP11 HGA7T (High Gain Antennas) Package Contents · One Antenna Stand for TNC Connectors · Wall Mount screws Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. AS2TNC-DS-40627NC KL Product Data Model No. Model No. AS2TNC