User manual LINKSYS EG008W - Product Brochure

Instant Gigabit® Series Gigabit 8-Port Workgroup Switch Connects network devices together, managing the flow of data between them. T he Gigabit 8-Port Workgroup Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements. Apply this switching power to your current hub-based Ethernet network, and your data traffic efficiency will improve several times over. Connect your Gigabit-equipped workstations to the Switch's 10/100/1000 ports for full-duplex, dedicated bandwidth of up to 2000Mbps! It's perfect for graphics, multimedia, and other applications that have to move large files across the network quickly. Gigabit 8-Port Workgroup Switch Model No.: EG008W With the Gigabit 8-Port Workgroup Switch, you can connect your existing 10/100 Ethernet network to your Gigabit server backbone without any additional equipment. All ports are auto-negotiating, and have automatic MDI/MDI-X crossover detection, so you don't have to worry about the cable type. Address learning and aging is supported, as well as 802.3x flow control with head-of-line blocking prevention to keep your high-speed clients from bogging down in lower-speed traffic. The Gigabit 8-Port Workgroup Switch from Linksys is the perfect solution for your desktop Gigabit and 10/100 networking needs. Benefits · Eight 10/100/1000Mbps, half/full duplex, switched ports · Forwards and filters packets at non-blocking, full wire speed · All ports have auto speed negotiation and auto MDI/MDI-X crossover detection · Supports address learning and aging, 802.3x flow control and head-of-line blocking prevention Features · 8 RJ-45 10/100/1000Mbps auto-sensing half/full duplex switched ports · All ports suppport auto MDI/MDI-X cable detection · Fully compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab · Non head-of-line blocking architecture · Full-duplex IEEE 802.3x flow control and half-duplex backpressure with intelligent port-based congestion detection and broadcast rate control Specifications Model Number Standards Ports Cabling Type LEDs EG008W IEEE 802.3, 802.3u, 802.3x, 802.3ab 8 RJ-45 10/100/1000 Mbps ports Category 5e Recommended Power, Link/Act, Speed, FDX Package Contents · One Gigabit 8-Port Workgroup Switch · One AC Power adapter · One registration card · One User Guide Minimum Requirements Environmental Dimensions 7.32" x 1.89" x 6.06" (186 mm x 48 mm x 154 mm) 1.1 lbs. (0.5 kg) External Power Supply 12V DC, 2A. Input 110 V AC Consumption 18W FCC Part 15 Class A 32ºF to 122ºF (-1ºC to 50ºC) -40ºF to 158ºF (-40ºC to 70ºC) · 200Mhz or Faster Processor · 64MB RAM Recommended · Ethernet or Gigabit Network Adapter · Cat5e Ethernet Network Cable Unit Weight Power Certifications Operating Temp. Storage Temp. Operating Humidity 20% to 95%, Non-Condensing Storage Humidity 20% to 95%, Non-Condensing Linksys World Headquarters: 17401 Armstrong Ave. Irvine, CA 92614 USA E-mail: sales@linksys.com support@linksys.com http://www.linksys.com Web: Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com. DS-EG008W-30217NC KL