ProConnect® Series ProConnect 8-Station KVM Switch ® Use this Guide to install: SVIEW08 v2 User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. ProConnect is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every ProConnect® Series ProConnect 8-Staiton KVM Switch is free from physical defects in material and workmanship under normal use for one year from the date of purchase. If these products prove defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original proof of purchase. All customers located outside of the United States of America and Canada shall be held responsible for shipping and handling charges. IN NO EVENT SHALL LINKSYS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Please direct all inquiries to: Linksys P.O. Box 18558, Irvine, CA 92623. FCC STATEMENT This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna Increase the separation between the equipment or device Connect the equipment to an outlet other than the receiver's Consult a dealer or an experienced radio/TV technician for assistance UG-SVIEW08 v2-10320NC KL ProConnect® Series ProConnect® 8-Station KVM Switch Table of Contents Introduction The ProConnect Series ProConnect 8-Station KVM Switch Features Package Contents System Requirements ® ® Introduction 1 1 1 2 2 The ProConnect® Series ProConnect® 8-Station KVM Switch The ProConnect® 8-Station KVM Switch from Linksys lets you take instant command over multiple desktop or notebook PCs -- all from a single keyboard, mouse, and monitor! Switch between PCs with the press of a key, or use the cycling feature to switch automatically at pre-selected time intervals. Got a notebook PC? Plug it into the switch and control it from your desktop PC's fullsized keyboard, monitor, and mouse -- it's like having your own docking station! Built to last, the ProConnect® 8-Station KVM Switch virtually eliminates cable swapping while saving you hundreds of dollars in storage space and hardware costs. It's the perfect choice for any file server fleet, Internet, or test site where you need to manage PCs quickly and easily. Features · · · · · · · · · · · · · Control Multiple PCs from One Keyboard, Mouse, and Monitor Switch instantly Between PCs from Your Keyboard or the CPU Switch's Select Button Save Hundreds of Dollars in Equipment, Space, and Power Costs Serves as a Quick Docking Station Reduce Required Floor Space by up to 50% Expand by Chaining Multiple Switches Together Runs with Virtually All Software Tested with Most Popular Monitor Brands No Software Required Smart Circuitry Prevents Power Surges Sturdy Metal Chasis and Quality Connectors Free Technical Support One Year Limited Warranty Getting to Know the ProConnect® 8-Station KVM Switch The 8-Station KVM Switch's Front Panel The 8-Station KVM Switch's Rear Panel 3 3 4 Connecting PCs to the ProConnect® 8-Station KVM Switch Single Stage Installation Two Stage Installation Three Stage Installation 5 5 6 7 Using the ProConnect® 8-Station KVM Switch Hot Plugging Powering Off and Restarting Port Selection Port ID Numbering 10 10 11 11 12 Using the On-Screen Display Overview OSD Menu Navigation OSD HotKey Navigation The OSD Function Keys OSD Security 14 14 15 15 16 21 Troubleshooting Appendix Computer Connection Table 22 23 23 Specifications Environmental 24 25 Warranty Information Contact Information 26 27 1 ProConnect® Series ProConnect® 8-Station KVM Switch Package Contents Getting to Know the ProConnect® 8Station KVM Switch The 8-Station KVM Switch's Front Panel On Line Port LED Orange. Indicates that the computer attached to the corresponding port is up and running. Green. Indicates the currently selected port. This LED will flash when the corresponding port is accessed under Auto Scan mode. Pressing this button starts Auto Scan Mode. Press a button to access the computer connected to the corresponding port. Pressing buttons #1 and #2 simultaneously for several seconds performs a Keyboard and Mouse reset. Holding down buttons #7 and #8 simultaneously for several seconds starts the Auto Scan mode. Selected Port LED · · · One ProConnect® 8-Station KVM Switch One AC Power Adapter One User Guide and Registration Card Auto Scan Button System Requirements Port Selection Button 8-Station Console Ports: · · · One VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer installed One PS/2 style mouse One PS/2 style keyboard Reset · · · One VGA, SVGA or Multisync video card One 6-pin mini-DIN (PS/2 style) or DB-9 (standard serial) mouse port One 6-pin mini-DIN (PS/2 style) keyboard port with a +5V DC on pin 4 and Ground on pin 3 or a 5-pin DIN (AT style) keyboard port with +5V DC on pin 5 and Ground on pin 4. PC's: Use a thin object, such as a ballpoint pen, to press this recessed switch in to initiate a reset of the 8Station KVM Switch. Pressing this briefly will perform a warm reset, which will rescan your ports for connections. Holding in the button for a longer period will perform a cold reset, which cycles the power off and clears the internal memory. 2 3 ProConnect® Series ProConnect® 8-Station KVM Switch The 8-Station KVM Switch's Rear Panel Connecting PCs to the ProConnect® 8-Station KVM Switch Before you connect any PCs to the 8-Station KVM Switch, make sure that the power on all of the PCs you will be connecting is off. You must also unplug the power cords or any computers that have the Keyboard Power On function. To prevent any damage to the 8-Station KVM Switch, make sure that all devices you are connecting are properly grounded. Make sure you have available enough Cabling Kits (available from your nearest Linksys dealer in either PS/2 or AT format, as applicable) to make the desired number of connections. Up to three ProConnect® 8-Station KVM Switches can be connected together to enable up to 512 computers controlled. These can be done in Single Station, Two Stage, or Three Stage Installation. Single Station Installation In Single Station Installation, up to eight computers are connected directly to the KVM Switch, as shown in the diagram below. No additional ProConnect® KVM Switches are daisy-chained to the first KVM Switch. Power The Power Port is where you will connect the included AC Power Adapter. When using this KVM Switch alone, a monitor, keyboard, and mouse are plugged into these ports. If this KVM Switch is being used as a second-stage switch when daisy-chained to another KVM unit, daisy-chain these ports into a CPU Port of the KVM Switch being used as the primary unit. Connect the cables that link the computers here. Linksys cable kits can be puchased at your nearest Linksys dealer. Console ports CPU ports 1. Plug your keyboard, mouse, and monitor into the 8-Station KVM Switch's Console ports. 2. Connect the monitor, keyboard, and mouse ports of your PC(s) to one of the 8-Station KVM Switch's CPU ports with a Cabling Kit. 4 5 ProConnect® Series ProConnect® 8-Station KVM Switch 3. Plug the AC Power Adapter into the 8-Station KVM Switch's power port, then plug the AC Power Adapter into an AC power source. 4. Power on the connected PC(s). Two Stage Installation To control up to 64 PCs through the 8-Station KVM Switch, you will need to connect eight additional 8-Station KVM Switches to your first 8-Station KVM Switch. This is the Two Stage Installation process. It will create 64 open ports for controlling PCs. A table showing the relation between the number of computers and the number of 8-Station KVM Switches needed to control them is provided in the Appendix. NOTE: Daisy-chaining different models of KVM Switches can cause problems with Hotkey and OSD port switching. To prevent this, only use ProConnect® 8-Station KVM Switches when daisy-chaining them together. 1. Using one 8-Station KVM Switch as a Primary unit and the other eight 8Station KVM Switches as Secondary units, use a Cabling Kit to connect the Console ports of the Secondary Units to the CPU ports of the Primary unit. In this way, the 64 CPU ports of the Secondary units are available through the Primary unit. 2. Connect the monitor, keyboard, and mouse ports of your PC(s), up to 64, to a CPU port in one the Secondary units with a Cabling Kit. 3. Plug the AC Power Adapters into the 8-Station KVM Switches' power ports, then plug each AC Power Adapter into an AC power source. 4. Power on the connected PC(s). Three Stage Installation To control the maximum number of PCs under the Three State Installation, you will need to connect eight additional 8-Station KVM Switches to your first 8Station KVM Switch and each of those eight additional 8-Station KVM Switches will need eight 8-Station KVM Switches connected to them, as shown in the diagrams on the following pages. This is the Three Stage Installation process. It will create 512 open ports for controlling PCs. A table showing the relation between the number of computers and the number of 8Station KVM Switches needed to control them is provided in the Appendix. NOTE: Daisy-chaining different models of KVM Switches can cause problems with Hotkey and OSD port switching. To prevent this, only use ProConnect® 8-Station KVM Switches when daisy-chaining them together. 6 7 ProConnect® Series ProConnect® 8-Station KVM Switch 1. Using one 8-Station KVM Switch as a Primary unit and the other eight 8-Station KVM Switches as Secondary units, use a Cabling Kit to connect the Console ports of the Secondary Units to the CPU ports of the Primary unit. 2. For each Secondary unit, eight Tertiary units will be connected by using a Cabling Kit to connect the Console ports of the Tertiary Units to the CPU ports of the Secondary unit. In this way, the 64 CPU ports of the Secondary units are available through the Primary unit. 3. Connect the monitor, keyboard, and mouse ports of your PC(s), up to 64, to a CPU port in one the Secondary units with a Cabling Kit. 4. Plug the AC Power Adapters into the 8-Station KVM Switches' power ports, then plug each AC Power Adapter into an AC power source. 5. Power on the connected PC(s). 8 9 ProConnect® Series ProConnect® 8-Station KVM Switch Using the ProConnect® 8-Station KVM Switch Hot Plugging The 8-Station KVM Switch supports hot plugging - cables can be connected or unplugged without turning off the switches power. In order for hot plugging to work properly, however, these procedures must be followed: · Hot Plugging CPU Ports Powering Off and Restarting If it becomes necessary to power down an 8-Station KVM Switch, you must perform the following prior to starting it back up: 1. Shut down all the PCs that are attached to the 8-Station KVM Switch, along with all other switches and PCs daisy chained. 2. Unplug the switch's AC power cord. 3. After a minute, reconnect the power along with any PCs and daisy chained switches, starting with the last connection in the chain and working back to the Primary switch. 4. After all of the connections ...