Control Station Instructions for Assembly Making Workspace WorkTM is a trademark of Lista International Corporation. Print Date: May 1998 This manual is proprietary information of Lista International Corporation. Unauthorized reproduction of any portion of this manual is prohibited without the written consent of Lista International Corporation. The material in this manual is for informational purposes only. It is subject to change without notice. Lista International Corporation assumes no responsibility for any typographical errors contained in this manual. © 1998 by Lista International Corporation 106 Lowland Street Holliston, MA 01746-2094 All rights reserved. For questions or Technical Support, call 1-800-722-3020 ii Table of Contents Assembling the Control Station Frame ...............................................................................................2 Assembling the Basic Control Station (CS2000 and CS2200) ....................................................................................2 Assembling the Control Station with Cabinet/Drawers...............................................................................................3 Attaching the Top Panel ....................................................................................................................3 Installing Insert Panels .......................................................................................................................4 Attaching the Rear Panels ..................................................................................................................7 Leveling and Anchoring the Control Station.......................................................................................7 Installing the Bookshelf .....................................................................................................................9 Installing the Pegboard, Privacy, or Louvered-Panels.........................................................................9 Installing the Maple Top ....................................................................................................................9 Attaching the Tambour Door...........................................................................................................11 Attaching the End Panels .................................................................................................................11 List of Figures Figure 1 Basic Control Station Frame Assembly.................................................................................................2 Figure 2 Control Station with Drawers Frame Assembly.....................................................................................4 Figure 3 U-Track and Safety Clip.......................................................................................................................6 Figure 4 Lock Channel.......................................................................................................................................6 Figure 5 Cylinder Lock ......................................................................................................................................6 Figure 6 Drawer with Suspension Frame ............................................................................................................6 Figure 7 Drawers Installed in Cabinet.................................................................................................................6 Figure 8 Attaching the Rear Panels.....................................................................................................................8 Figure 9 Anchoring the Control Station ..............................................................................................................8 Figure 10 Installing the Bookshelf, Light, Panel, and Top ................................................................................. 10 Figure 11 Installing the Tambour Door and End Panels..................................................................................... 12 iii Tools Required for Assembly Assembling the Lista Control Station requires the following tools: Sockets or Open End Wrenches £ £ £ £ 3/8" drive with 3" to 6" extension 1/2" Socket or open end wrench 7/16" Socket or open end wrench 9/16" Socket or open end wrench Screwdrivers £ #2 Phillips Head Screwdriver General Tools £ £ £ £ Center Punch and Flat Punch Awl Measuring Tape Rubber Mallet Before Assembling the Control Station Before you begin assembling the Control Station you should read through the assembly instructions to familiarize yourself with the order in which the parts are assembled. It is important to assemble the components in the same sequence as described in this manual. For technical support or questions, call 1-800-722-3020. iv ...