INSTRUCTION FOR INTERCHANGEABLE CORE LOCK Instruction for the extraction 1. Place the key in the cylinder. (The key has to be vertical) 2. Turn the key to 2 o'clock (locked) or 10 o'clock (unlocked). Core and key are in the extraction Position (Picture C-locked example). 3. Push the extraction tool in the slot as far as possible and using a little pressure release the mechanism (Picture D). 4. Extract the cylinder and key. Picture C Picture D Instruction for the installation of the cylinder 1. Adjust the joining piece of the plastic insert as shown in Picture A. 2. Turn the key in the cylinder insert to 2 o'clock (locked) or 10 o'clock (unlocked), as shown in Picture B (locked example). 3. Insert the cylinder in the plastic insert, making sure that the key stays in the same position. 4. Turn the key to 12 o'clock (locked: left ­ unlocked: right), until the central locking mechanism catches. 5. Test the locking function. Picture A Picture B LISTA INTERNATIONAL CORPORATION 106 Lowland Street Holliston, MA 01746 Technical Support (800) 722-3020 ext. 233 or 234 Document Number: MD033A3, Revision 0 ...