60-Ohm Terminator Installation Instructions Pub. 988-0154-061 This package contains a 60-Ohm terminator for use with a Lowrance product running an LGC-2000 GPS module. NOTE: The LGC-2000 will not operate unless connected to a terminated circuit. If you are not connecting the LGC-2000 to an existing NMEA 2000 buss (as described in the LGC-2000 instruction sheet, part 9880147-981), you must attach this 60-Ohm terminator to the shorter branch on the LGC-2000's 25-foot Y-adapter extension cable. To unit's Network socket 60-Ohm terminator To NMEA 2000 buss LGC-2000 Y-adapter extension cable with 60-Ohm terminator. The LGC-2000 extension cable's Y-adapter should come packaged with this 60-Ohm terminator already attached to it. Do not remove this terminator unless you're connecting the module to an existing NMEA 2000 buss. If you've purchased this terminator as a replacement, attach it as shown in the image above. NOTE: An existing operational NMEA 2000 buss will already have terminators in place and will already be powered. If you're connecting to such a network, you won't need the terminators or extension cable provided. Do not add terminators to a functional NMEA 2000 buss! Pub. 988-00154-061 Printed in Mexico 011604 © Copyright 2004 All Rights Reserved LEI Extras, Inc. ...