Large Adult Cuff Model #109-232 Instructions for Use 1. Remove the connector by pulling it out of the original air tube included with your blood pressure monitor (for automatic blood pressure monitors only). To facilitate removal, run the tube and air connector under warm water to loosen the connection. Note: The connector fits snugly in the air tube and may require extra effort when pulling it out. (Do NOT cut the connector from the tube or try to pull the connector out with your teeth.) 2. Place the connector in the open end of the Large Adult Cuff air tube. 3. Connect the cuff tube to the monitor and refer to the instruction manual included with your blood pressure monitor to continue your measurement. Distributed by: The Lumiscope Company, Inc. 122 Tices Lane East Brunswick, NJ 08816 www.lumiscope.net E-mail: info@lumiscope.net Made and Printed in China ...