User manual MAGELLAN EXPLORIST 600

Magellan eXplorist 600 Reference Manual Topics: · · · · · · · · · · · · · · · · · eXplorist 600 GPS Receiver Using the eXplorist 600 Starting Up Navigation Screens File Structure Points of Interest Routes Track Logs Weather Electronic Compass Advanced Features Magellan Geocache Manager Using MapSend Preferences Specifications Accessories Contacting Magellan Support *** Warnings *** IN THE INTEREST OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE DRIVING A VEHICLE. Please do not try to change any settings on the Magellan® eXploristTM while driving. Come to a complete stop or have a passenger make any changes. Taking your eyes off the road is dangerous and can result in an accident in which you or others could be injured. USE GOOD JUDGMENT This product is an excellent navigation aid, but it does not replace the need for careful orienteering and good judgment. Never rely solely on one device for navigating. USE CARE The Global Positioning System (GPS) is operated by the U.S. Government, which is solely responsible for the accuracy and maintenance of the GPS network. The accuracy of position fixes can be affected by the periodic adjustments to GPS satellites made by the U.S. government and is subject to change in accordance with the Department of Defense civil GPS user policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry and obstructions, such as buildings and large trees. USE PROPER ACCESSORIES Use only Magellan cables and antennas; the use of non-Magellan cables and antennas may severely degrade performance or damage the receiver, and will void the warranty. LICENSE AGREEMENT Thales Navigation grants you, the purchaser, the right to use the software supplied in and with Thales Navigation GPS products (the "SOFTWARE") in the normal operation of the equipment in accordance with the terms of the End User License Agreement that is included with the product. The SOFTWARE is the property of Thales Navigation and/or its suppliers and is protected by United States copyright laws and international treaty provisions; therefore, you must treat the SOFTWARE like any other copyright material. You may not use, copy, modify, reverse engineer or transfer this SOFTWARE except as expressly provided in the license. All rights not expressly granted are reserved by Thales Navigation and/or its suppliers. *** No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the purchaser's personal use without the prior written permission of Thales Navigation. *** Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. © 2005 Thales S.A. All rights reserved. The Magellan Logo, Magellan, eXplorist and TrueFix are trademarks of Thales. 631209-01 A Table of Contents eXplorist 600 GPS Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features of the Magellan eXplorist GPS Receiver. Button Descriptions . . . . . . . . . . . . . . . . . . . . . Installing and Charging the Battery . . . . . . . . . . Installing an Optional SD Card. . . . . . . . . . . . . . Connecting to a Personal Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 4 5 5 i Using the eXplorist 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Going to a Destination Saving Your Position . . Tracing Your Steps . . . Additional Features. . . Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 7 8 9 9 Starting Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Turning the eXplorist On . . . . . . . . . . . . Turning the eXplorist Off . . . . . . . . . . . . Changing the Display Backlight Intensity Using the eXplorist for the First Time . . . Conclusion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 10 10 11 14 Navigation Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Accessing the Navigation Screens . . . . . . Map Screen . . . . . . . . . . . . . . . . . . . . . . Map Screen Overview. . . . . . . . . . . . . Changing Map Scale . . . . . . . . . . . . . Map Screen Modes . . . . . . . . . . . . . . Showing or Hiding Map Information . . Customizing the Map Information . . . . Displaying Street Information . . . . . . . Changing the Map Orientation . . . . . . Changing the Primary Usage. . . . . . . . Changing the Map Detail . . . . . . . . . . Changing the Track Recording Interval. Customizing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . . . 18 . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . 22 Table of Contents Compass Screen. . . . . . . . . . . . . . . . . Compass Screen Overview . . . . . . . Customizing the Information Fields . Position Screen . . . . . . . . . . . . . . . . . Position Screen Overview . . . . . . . . Resetting the Trip Odometer . . . . . . Satellite Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 23 24 25 25 26 27 ii Basic File Stucture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 File Structure Overview . . . . . . . . . . . . . Using the Filing System with POIs . . . . . Using the Filing System with Routes . . . Using the Filing System with Track Logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 29 29 30 Points of Interest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Marking Your Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Quick-Marking Your Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Marking Your Position (Personalized) . . . . . . . . . . . . . . . . . . . . . . . 32 Making POIs for Locations Other Than Your Present Position . . . . . . . . 33 Marking a Position by Entering Coordinates . . . . . . . . . . . . . . . . . . 33 Marking a Position using the Map Cursor. . . . . . . . . . . . . . . . . . . . 34 Marking a Position from a Map Object. . . . . . . . . . . . . . . . . . . . . . 34 The POI Database. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Searching for a User-Entered POI . . . . . . . . . . . . . . . . . . . . . . . . . 35 Searching for a Preloaded POI using Nearest . . . . . . . . . . . . . . . . . 36 Searching for a Preloaded POI using Alphabetical . . . . . . . . . . . . . 37 Editing a User-Created POI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Deleting a User-Created POI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Viewing a User-Created POI on the Map Screen . . . . . . . . . . . . . . . . . 40 Copying a Preloaded POI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Viewing a Preloaded POI on the Map Screen. . . . . . . . . . . . . . . . . . . . 42 Showing or Hiding User-Entered POIs on the Map Screen . . . . . . . . . . 43 Table of Contents Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 GOTO Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Creating a GOTO Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Creating a GOTO Route from the Map Cursor . . . . . . . . . . . . . . . . . 46 Creating a GOTO Route to a Map Object . . . . . . . . . . . . . . . . . . . . 47 Multi-Leg Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Creating a Multi-leg Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Activating/Deactivating a Route. . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Changing the Destination Leg of an Active Route . . . . . . . . . . . . . . 51 Editing a Saved Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Reversing a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Deleting a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Moving a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Copying a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Viewing a Route on the Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 iii Track Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Track Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stopping and Resuming Active Track Logging Starting a New Active Track Log . . . . . . . . . . Saving an Active Track Log. . . . . . . . . . . . . . Creating a BackTrack Route . . . . . . . . . . . . . Clearing the Active Track . . . . . . . . . . . . . . . Converting the Track Log to a Route . . . . . . . Viewing the Track Log on the Map. . . . . . . . . Working with Saved Track Logs . . . . . . . . . . . . . Following Saved Track Logs . . . . . . . . . . . . . Reversing a Saved Track Log . . . . . . . . . . . . Deleting a Saved Track Log . . . . . . . . . . . . . Moving a Saved Track Log . . . . . . . . . . . . . . Copying a Saved Track Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 . . 59 . . 60 . . 61 . . 62 . . 63 . . 64 . . 65 . . 66 . . 66 . . 66 . . 67 . . 68 . . 69 Weather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Weather Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Accessing the Weather Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Calibrating the Pressure Altimeter . . . . . . . . . . . . . . . . . . . . . . . . . 71 Table of Contents Electronic Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Calibrating the Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Turning the Compass On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 iv Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Using Area Calculation . . . . . . . . . . . . . . . . . . . . . Calculating an Area . . . . . . . . . . . . . . . . . . . . . Deleting All POIs from the Area Calculation List. Editing the POI List in Area Calculation . . . . . . Computing Best Fish/Hunt Times . . . . . . . . . . . . . . Accessing Fishing and Hunting Times . . . . . . . . Changing the Position . . . . . . . . . . . . . . . . . . . Changing the Date . . . . . . . . . . . . . . . . . . . . . . Displaying Sun and Moon Information . . . . . . . . . . Accessing the Sun/Moon Function . . . . . . . . . . Changing the Position . . . . . . . . . . . . . . . . . . . Changing the Date . . . . . . . . . . . . . . . . . . . . . . Viewing the Vertical Profile . . . . . . . . . . . . . . . . . . Using the Simulator . . . . . . . . . . . . . . . . . . . . . . . Simiulating a Saved Route . . . . . . . . . . . . . . . . Communicating with a Personal Computer . . . . . . . Connecting to a Personal Computer. . . . . . . . . . Changing Modes . . . . . . . . . . . . . . . . . . . . . . . Working with Files on the Personal Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 . . . . . . . . . . . 74 . . . . . . . . . . . 75 . . . . . . . . . . . 75 . . . . . . . . . . . 76 . . . . . . . . . . . 76 . . . . . . . . . . . 76 . . . . . . . . . . . 76 . . . . . . . . . . . 77 . . . . . . . . . . . 77 . . . . . . . . . . . 77 . . . . . . . . . . . 77 . . . . . . . . . . . 78 . . . . . . . . . . . 79 . . . . . . . . . . . 79 . . . . . . . . . . . 80 . . . . . . . . . . . 80 . . . . . . . . . . . 80 . . . . . . . . . . . 81 Magellan Geocache Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 What is Geocaching?. . . . . . . . . . . . . . . . . . . . . . What is the Magellan Geocache Manager? . . . . . . How Do I Install the Magellan Geocache Manager? Using the Magellan Geocache Manager . . . . . . . . Magellan Geocache Manager Tools . . . . . . . . . . . . Working with Geocache Files . . . . . . . . . . . . . . . . Adding Downloaded Files to the List . . . . . . . . Uploading to the Magellan eXplorist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 82 82 83 84 85 85 86 Table of Contents Using the eXplorist with MapSend. . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 What is MapSend? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of Uploading Detailed Maps from MapSend to eXplorist . . . . Transferring POIs, Routes, and Track Between MapSend and eXplorist Transferring POIs, Routes, and Track to MapSend . . . . . . . . . . . . Transferring Waypoints, Routes, and Track from MapSend . . . . . . . . . . . . 87 87 90 90 91 v Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Restarting the GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Using Active Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Changing the Default Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Selecting the Background or Detail Map . . . . . . . . . . . . . . . . . . . . 96 Setting the Map Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Selecting Navigational Units of Measure . . . . . . . . . . . . . . . . . . . . 97 Selecting the North Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Selecting the Coordinate System. . . . . . . . . . . . . . . . . . . . . . . . . . 99 Selecting the Map Datum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Using the Power Management Tool. . . . . . . . . . . . . . . . . . . . . . . . . . 101 Setting the Power-Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Setting the Light Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Personalizing the eXplorist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Selecting Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Clearing Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Clearing Active Track History . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Clearing User-Entered POIs and Routes . . . . . . . . . . . . . . . . . . . . 106 Clearing Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Clearing Active Track, User-Entered POIs, and Routes . . . . . . . . . 106 Reseting the eXplorist to Factory Defaults . . . . . . . . . . . . . . . . . . 107 Setting Alarms & Beepers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Setting the Beeper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Setting Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Setting the Time & Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Setting Daylight Savings Time. . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Contacting Magellan Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 eXplorist 600 GPS Receiver Features of the Magellan eXplorist GPS receiver: · Built-in background map (8 MB) · High-definition color display · Preloaded points of interest · Rugged design, rubber-protected · 8 MB of usable memory · Superior tracking with 14 parallel channels · 3D Electronic Compass Antenna · Rechargeable Li-Ion battery · TrueFixTM GPS technology · 3 meter accuracy (WAAS/EGNOS) · Multiple track logs · Unlimited storage of data using SD cards 1 · Pocket-sized and waterproof to IPX-7 Display Backlight Button On/Off Button ENTER Arrow Joystick ZOOM OUT ZOOM IN MENU NAV GOTO MARK ESCAPE eXplorist 600 GPS Receiver (front) eXplorist 600 GPS Receiver Button Descriptions: On/Off Backlight Turns the eXplorist on or off. 2 Turns the display backlight on. Sequences from off to low to high intensity. Used to access highlighted menu items or accept highlighted buttons. Cancels data inputs. Closes the accessed function and goes back to the last viewed screen. Steps backward through the navigation screens. ENTER ESCAPE ZOOM IN Used on the Map screen to zoom in on the map displayed. The map display can be zoomed in to 100 ft. (35.0 m). Also used to quickly step through the list of POIs when doing an alphabetical search. ZOOM OUT Used on the Map screen to zoom out on the map displayed. The map display can be zoomed out to 1700 mi (2700 km). Also used to quickly step through the list of POIs when doing an alphabetical search. MENU Brings up a menu with available options. Options can be selected by using the arrow joystick to highlight the option and pressing ENTER to access it. Steps through the navigation screens. (Map screen > Compass screen > Position screen > Satellite Status screen) Used to save your present position as a point of interest. Points of interest that you save are stored in the My Points of Interest portion of the database. Creates a one-leg route from your present position to a destination selected from the Points of Interest database or by using the cursor on the background map. Pans the cursor on the Map screen. Moves the highlight bar to select menu options and data-entry fields. NAV MARK GOTO Arrow joystick eXplorist 600 GPS Receiver Wrist Lanyard Strap Mounting Hole 3 Connector for external power and connection to a personal computer. Battery Door Battery Door Fastener (Unscrew to open battery door to install batteries.) eXplorist 600 GPS Receiver (back) eXplorist 600 GPS Receiver Installing and Charging the Battery Installing the Battery: Remove the battery door by unscrewing the battery door fastener and lifting the battery door out. Insert the battery as shown and replace the battery door. Charging the Battery: Important: Charge the battery completely before first using your eXplorist. Connect the PC cable to the back of the eXplorist. Connect the AC adapter jack to the PC cable and then to an AC wall outlet. The battery will begin charging, even with the eXplorist turned off. Full battery charging may take 4 hours. Tips on conserving battery life: 4 · Turn the eXplorist off when not in use. Whether you are moving or standing still, the eXplorist is constantly calculating position fixes and using power at the same rate. If you are going to be at the same position for any length of time, turn the eXplorist off. · Use the Power Timer to automatically turn the eXplorist off. The Power Timer option allows you to set a time that the eXplorist will automatically turn off when none of the buttons have been pressed and you are not moving for a selected time. You can select from 5, 10, 30 or 60 minutes. · Use the display backlight sparingly. The most severe drain on the batteries is the use of the display backlight. You will notice a drastic drop in battery life with the backlight display on high. You should use the Light Timer to set a time interval that the display backlight will automatically turn to the lowest setting when none of the buttons have been pressed and the computed location hasn't changed. Setting the Power Timer From any Nav screen press MENU. Highlight Preferences and press ENTER. Highlight Pwr Management and press ENTER twice. Use the arrow joystick to select 5 Minutes, 10 Minutes, 30 Minutes, 60 Minutes or Off. Press ENTER. Press NAV to return to the last viewed navigation screen. Setting the Light Timer From any Nav screen press MENU. Highlight Preferences and press ENTER. Highlight Pwr Management and press ENTER. Use the down arrow to highlight the Light Timer field. Press ENTER. Use the arrow joystick to select 30 Seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes or Timer Off. Press ENTER. Press NAV to return to the last viewed navigation screen. eXplorist 600 GPS Receiver Installing an Optional SD Card Open the battery door and remove the LI-ION battery, exposing the SD Card Cradle. SD Card Cradle Release 5 Lightly press on the SD Card Cradle Release and the cradle will spring open. With the cradle open, slide the SD card in the cradle (shown in gray). Do NOT lay the SD card flat in the battery compartment as damage will occur when closing the SD Card Cradle. Gently push the SD card cradle back down until it locks into place. Put the LI-ION battery back in the battery compartment and secure the battery door. Connecting to a Personal Computer Turn your eXplorist off and connect the round connector of the eXplorist data cable to the back of your eXplorist and tighten the locking screw. There are alignment tabs on the connector to make sure that the connector is installed properly. It is recommended that you connect the eXplorist to external power using the external AC power adapter. The other end of the eXplorist data cable has a standard USB connector that you connect to your personal computer USB ports (normally found on the back of your personal computer). Turn your personal computer on and then turn on your eXplorist. You may see a message on your computer indicating that it has found a new USB hardware device. On your eXplorist, a screen is displayed indicating that it is in USB File transfer mode. Connecting the Cable Right click the "My Computer" icon on the desktop of your computer and select the "Explore" option. You will see a new device named "Removable Disk" representing the internal memory or SD card, depending upon what you have selected. From here you are able to copy files to and from the installed SD card to your computer. Using the eXplorist 600 6 The eXplorist 600 uses information from the GPS satellites orbiting the earth to provide you with detailed information about your exact location. This is the foundation that your eXplorist will use to provide you with the necessary information to arrive at your destination. Going to a Destination The most common use of your eXplorist will be to provide you with the navigation tools you'll need to arrive at your chosen destination. The simplest route, and the one used most often, is a GOTO route. This is a route that is computed as a straight line from where you are to where you want to go. Step One: Compute Your Position The basic operation of your eXplorist is to use the GPS satellites to compute your present position. This is done internally in the software of your eXplorist. The only thing that you need to do is to give your eXplorist a clear view of the sky so that it can receive the signals from the satellites. Do: · · Don't: · · · · Cover the antenna with your hand or other objects. Point the antenna down. Stand under trees or other heavy foliage. Stand where the satellite signals are being blocked by large obstructions (such as buildings, in a narrow canyon, etc.) Point the antenna up toward the sky. Maintain a clear view of the sky. If you find that the eXplorist is not computing a position, just move to a place that has a better view of the sky. Anytime that you want to view the status of the satellites and their signal strength, switch to the Satellite Status screen. Here, you will graphically see the satellites and their relative signal strength. You need at least three satellites with good signal strength (indicated by green bars) to compute your position. A computed position with only three satellites is termed a 2D position fix. When you are getting a 2D position fix, your elevation is not being computed. To add elevation to your position fix, you need at least four satellites with good signal strength. Positions that use four or more satellites are called 3D position fixes. Using the eXplorist 600 Step Two: Where Do You Want To Go? Now that the eXplorist knows where you are, you need to tell it where you want to go. There are many different ways you can do this, but the simplest and most commonly used is a "GOTO" route. This is a one-leg route with a beginning (where you are now) and a destination (where you want to go). The destination is selected by using the Points of Interest database. This database has two main options: positions you have saved (My Points of Interest) or points of interest that have been preloaded into your eXplorist (Background Map). 7 Creating a GOTO route is as simple as pressing the GOTO button and selecting the destination from the points of interest database. Step Three: Calculating Movement As you move, your eXplorist is constantly calculating new positions, comparing the new position to the previous position and calculating such things as heading and speed. This is all done in the eXplorist's software communicating with the satellites and is instantaneously shown on your display. Step Four: Providing Directions Your eXplorist constantly computes a direct line from your present position to your destination. From there, it will provide you instructions to guide you along that straight path. Unless you are on a large body of water, it will be unlikely that you will be able to follow these instructions exactly. To compensate for that, your eXplorist automatically updates the route, providing you with up-to-date information about getting to your destination. GOTO routes are the simplest and most commonly used feature of your eXplorist 600. With just the GOTO button the eXplorist will provide you with the tools needed to get to any point of interest stored in your database. Saving Your Position Another commonly used feature of the eXplorist is saving your position to the points of interest database. This feature is accessed by pressing the MARK button. When saving your position, you can also add attributes such as the icon or a name for the point of interest. This will help you to find this spot in the future when accessing it from the points of interest database. Suppose that you have set up camp for the night. Tomorrow, you plan on doing some nature exploring and you want to be able to come back to the campsite when you are done. Press the MARK button and set the name of the point of interest to "Camp". After your hiking is done, simply use the GOTO button and select "Camp" from the list of My Points of Interest. It's that simple to find your way back. While out fishing on the lake, you come across the perfect spot for catching your limit. Next year, you want to be able to come back to this same spot. Turn on your eXplorist; and after it has computed your position, press the MARK button to save it. This time you can enter the name "Catfish1" and save your point of interest. Next year, you can be back at the same hot spot with just a press of the GOTO button. Using the eXplorist 600 8 A simpler example, and one you can do at just about any time, is finding your car in that ocean of other cars in the shopping mall parking lot. Just park your car, step outside and let your eXplorist compute your position. (Make sure that you have a clear view of the sky.) Using the MARK button, save this position with the name "Car". When you are done shopping, just go outside the mall and create a GOTO with the destination "Car". No matter where you parked, your eXplorist will guide you back, simply and easily. Tracing Your Steps Hikers, mountain bikers and outdoor enthusiasts often need the option of leaving a trail of breadcrumbs that they can follow back to where they started. The eXplorist has a feature called BackTrack that enables you to do just that. It was mentioned earlier that your eXplorist is constantly computing your present position and that you can save your position by using the MARK button. Now, imagine that your eXplorist automatically saved your computed positions as you moved along the trail. Pretty soon there would be a set of saved positions, like breadcrumbs, that represents the trail you have taken. This is exactly what the eXplorist does. It saves the computed positions as hidden points of interest and strings them together to represent your travels. This is called your Track, and the hidden points of interest are your Track Log. Your eXplorist enables you to use this Track, reverse it and navigate you along the same path that you followed to get you back to your destination. You might drive to the ranger station and follow the trail that leads you to the waterfalls you have been wanting to see. With your eXplorist turned on and able to compute position fixes, you continue along the trail. The trail winds along and has many smaller trails attached to it. As the day progresses you arrive at the falls. When it's time to head back to your car, you access your Track Logs list and select the Active Track log. Now, press MENU, highlight BackTrack and press ENTER. Your eXplorist will now seamlessly guide you along the path, tracing your footsteps, back to where you started. Another nice feature of Track Logs, which you may find useful, is that you are able to save the Track Logs and recall them at any time. In the above example, at the waterfall, you could save that track and use it anytime you wanted to go back. Using the eXplorist 600 Additional Features 9 Your Magellan eXplorist contains all of the features that you would expect from a high-quality Magellan-brand handheld navigation device, as well as many more to make your outdoor experience more enjoyable. You have the ability to customize the navigation screens, enabling you to view the information that is important to you. The eXplorist makes full use of the Map screens, enabling you to graphically see your position, the route you are navigating, the path you have trekked (Track), and points of interest icons. There is a builtin odometer so that you can log the length of your journey. User preferences enable you to set up and maintain your eXplorist so that it fits your needs and requirements. The eXplorist gives you all of this and more in an easy-to-use, portable navigation tool that includes built-in help files that you can access in the great outMagellan eXplorist 600 doors. with optional swivel mounting bracket Summary Go from this... to this... with this. Starting Up Turning the eXplorist On To turn the eXplorist on, press the POWER button on the top right side. To prevent the eXplorist from being turned on accidentally, draining the batteries, you need to press ENTER when the Startup screen is displayed. You have approximately 30 seconds between pressing the POWER button and pressing the ENTER button, otherwise the eXplorist will automatically turn itself off. 10 Turning the eXplorist Off To turn the eXplorist off, press the POWER button on the top right side. There is a 5-second countdown after you press the POWER button. If you change your mind and decide to leave the eXplorist on, just press the ESC button. If you press the POWER button during this countdown period, the eXplorist will immediately turn off. Changing the Display Backlight Intensity The display backlight has three levels of intensity: high, medium, and low. When the eXplorist is first turned on, the display backlight is set to high. Press the LIGHT button on the top left side of the eXplorist to turn the backlight on medium. Pressing the LIGHT button a second time sets the backlight to low. To turn the backlight back to high, press the LIGHT button again. Backlight intensity changes each time you press the LIGHT button. REMEMBER: Using the display backlight on high causes a heavy drain on the batteries. Starting Up Using the eXplorist for the First Time 11 Turn the eXplorist on. Press the Power button. When the Startup screen is displayed, press ENTER. Select Language. When you turn on the eXplorist for the first time, you are given the option of selecting one of the ten languages that can be used. You can change the language selection at any time by accessing Menu > Preferences > Languages. Tip: If you accidentally change the language but you can't read the text and need to change it back, press the NAV button until the Satellite Status screen is displayed. Press MENU. Use the Arrow joystick to highlight the fourth line and press ENTER. Use Use arrow joystick to move the Arrow joystick to highlight the fifth line and press ENTER. the highlight up and down. The Language Select screen will be displayed. Press ENTER to accept Read Warning. When you agree to the warning statement, press ENTER to continue. Press ENTER to continue Compute Initial Position. For this operation, it is best if you are outside and have a clear, unobstructed view of the sky. Without a clear view, this will take much longer and could result in the eXplorist being unable to compute the initial position automatically. The eXplorist begins to compute your initial position. This may take a few minutes while it is doing a cold start. Normally, when you first turn the eXplorist on it will compute your position in a matter of seconds when able to do a warm start. (An explanation of cold start vs. warm start is provided following this section.) The Satellite Status screen is displayed, showing you the progress of the collection of satellite data. Satellite Status screen shows how many satellites are being tracked, as well as the relative strength of the signal. Starting Up The Satellite Status screen will continuously update, and you will be able to graphically see how well your eXplorist is performing. 12 When the eXplorist has enough information to compute a position fix, the Satellite Status screen is replaced with the Map screen. The arrow cursor in the center of the Map screen represents your position. As you move, the arrow will point in the direction you are traveling. Tip: Use the ZOOM IN and ZOOM OUT buttons to change the map scale so that you can see your present position better. If the eXplorist is unable to compute your initial fix in a few minutes: If the eXplorist determines that it is unable to track the satellites within a few minutes, it will present you with the following screens in an effort to better determine its approximate location. Select Region. Use the arrow joystick to highlight the region that you are located in. With the region highlighted, press the ENTER button. Select Area. This displays a list of areas for the region you selected. Use the Arrow joystick to highlight the area that applies to you, and press the ENTER button. Starting Up Enter Current Time. Use the arrow joystick to enter the current time. Arrow Arrow Arrow Arrow Joystick Joystick Joystick Joystick Up: Increases the highlighted number Down: Decreases the highlighted number Right: Moves the highlight one character to the right Left: Moves the highlight one character to the left 13 Toggle between AM and PM by moving the arrow joystick up or down when AM or PM is highlighted. When you have entered the correct time, press ENTER. The latitude and longitude that represents the center of the region and area you selected is displayed. Enter the Date. Use the Arrow joystick to set the date displayed to the current date. Arrow Arrow Arrow Arrow Joystick Joystick Joystick Joystick Up: Increases the highlighted number Down: Decreases the highlighted number Right: Moves the highlight one character to the right Left: Moves the highlight one character to the left When the month is highlighted, use the arrow joystick up or down to scroll through the list of months. When you have entered the correct date, press ENTER. Accept Information. The Done button is highlighted at the bottom of the display. Review the information you entered; if correct, press ENTER. Tip: If the time or the date is incorrect, you can fix it now. Use the Arrow joystick to highlight the time or the date field that you want to change. With the field highlighted, press ENTER. You can now change the information using the same technique used before. The Satellite Status screen is displayed again and the eXplorist will try to compute your position using the information you just provided. Tip: If you notice that the satellite signal-strength bars are still not changing, try moving to a new location where you have a clearer view of the sky. As before, when the eXplorist computes the initial position, the Map screen will be displayed, with your computed position indicated by the arrow cursor in the middle of the display.