STAINLESS STEEL BUILT-IN WINE/BEVERAGE COOLER INSTRUCTION MANUAL Model No.: MCWC50DST MCBC58DST To ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance. TABLE OF CONTENTS NAMES OF THE PARTS............................................................... 2 SPECIFICATIONS....................................................................... 3 IMPORTANT SAFETY INSTRUCTIONS........................................... 4 INSTALLATION INSTRUCTIONS BEFORE USING YOUR APPLIANCE...................................... 4 FREE STANDING INSTALLATION......................................... 4 BUILT-IN INSTALLATION..................................................... 5 ELECTRICAL CONNECTION ............................................... 5 APPLIANCE FEATURE MCWC50DST: WINE COOLER ............................................. 6 MCBC58DST: BEVERAGE COOLER ..................................... 6 OPERATING YOUR APPLIANCE MCWC50DST: WINE COOLER ............................................. 7 MCBC58DST: BEVERAGE COOLER ...................................... 7 CHANGING THE INNER LIGHT ............................................ 8 AUTOMATIC DEFROST ...................................................... 8 CHANGING THE REVERSIBLE DOOR ........................................... 8 CARE AND MAINTENANCE CLEANING YOUR APPLIANCE............................................. 9 VACATION TIME................................................................ 9 MOVING YOUR APPLIANCE................................................ 9 ENERGY SAVING TIPS....................................................... TROUBLESHOOTING GUIDE....................................................... APPLIANCE WARRANTY............................................................. 1 9 10 11 EN NAMES OF THE PARTS MODEL NO.: MCWC50DST Electronic thermostat Wine rack Door gasket Glass door Cabinet MODEL NO.: MCBC58DST Electronic thermostat Beverage shelf Glass door Cabinet Door gasket 2 EN SPECIFICATIONS ­ Model # MCWC50DST Product Description Model No. Unit Dimensions ( inches ) Magic Chef 50 Bottle Stainless Steel Built-In Wine Cooler MCWC50DST Width 23.4" Height 34.4" 99 lbs Depth 24.4" Net Weight ( lbs) SPECIFICATIONS ­ Model # MCBC58DST Product Description Model No. Unit Dimensions ( inches ) Magic Chef 5.8 cu.ft. Stainless Steel Built-In Beverage Cooler MCBC58DST Width 23.4" Height 34.4" 104 lbs Depth 24.4" Net Weight ( lbs) 3 EN IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: · · · · · · · Read all instructions before using the wine or beverage cooler. DANGER or WARNING: Risk of child entrapment. To avoid the possibility of child entrapment, please take the following precautions before throwing out the appliance. - Remove all doors from the unit. - Leave the shelves in place so that children may not easily climb inside. Never allow children to operate, play with, or crawl inside the appliance. Refrigerants: All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal of product. It is the consumer's responsibility to comply with federal and local regulations when disposing of this product. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or an explosion. -Save these instructions- INSTALLATION INSTRUCTIONS Before Using Your Appliance · · Remove the exterior and interior packing. Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from improper handling during transportation. Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 9) · Free-Standing Installation · · This appliance is designed to be installed built-in or free standing. Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 55°F (12.8°C) or above 77°F (25°C) will hinder the performance of this appliance. This unit is not designed for use in a garage or any other outside installation. Avoid locating the appliance in moist areas. Plug the appliance into dedicated, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. This unit is not designed to be installed in an RV or used with an inverter. After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 3 ~ 4 hours under before placing wine bottles or beverages in the appliance. · · · 4 EN Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½" wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing. The width of the opening must include the filter panels. Note: · The door should protrude at least 1" beyond the surrounding cabinets. · If door reversal is desired, please follow Reversible door instructions on page 8 of this manual prior to installation. Figure A The cutout depth must be 24". Electrical Connection WARNING Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied. This appliance requires a standard 115 Volt A.C. /60Hz electrical outlet with three-prong ground. This appliance is not designed to be used with an inverter. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. Use of an extension cord can negatively affect the performance of the unit. If any problems with the appliance persist, please contact our Customer Service Dept. to consult with a representative at 888 775-0202 or visit our website to request warranty service at www.mcappliance.com. 5 EN APPLIANCE FEATURE MCWC50DST: Wine Cooler Engaged Wine Shelves · There are five wine shelves of full depth in upper part of cabinet to store wine bottles. · The second supporting guide (Counted from top, see illustration "A") is not designed for wine shelves. It is only for beverage shelf. · All the top five wine shelve have tabs to engage the cabinet on both sides. · Any of the wine shelve can be removed to accommodate larger bottles. To Remove a Shelf: · Remove all bottles from the shelves. · Lift the shelve upwards and then gently pull out the shelves. To Replace a Shelf: · Place the sides of the shelves back onto the supporting guides of the cabinet and push back until the shelf tabs slide into place. NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles. Bottle Arrangement · The top five shelves each hold 8 bottles with the bottle necks alternating front to back. · The bottom rack, which consist of two stories, each holds 6 bottles with bottle necks facing the front. MCBC58DST: Beverage Cooler Engaged Beverage Shelves There are three glass shelves to store beverage cans or bottles. · All three glass shelves have tabs to engage the cabinet on both sides. · The shelves may be arranged on any supporting guide as preferred. · Any of the glass shelves can be removed to accommodate larger cans or bottles. To Remove a Shelf: · Remove all cans or bottles from the shelves. · Lift the shelve upwards and then gently pull out the shelves. To Replace a Shelf: · Place the sides of the shelves back onto the supporting guides of the cabinet and push back until the shelf tabs slide into place. NOTE: Ensure that the tabs are firmly engaged in place before storing any beverages. Warning: · Do not press/jostle the circulation fan in the cabinet when you place in or remove the beverage cans or bottles. · Properly store your beverages so that the cans or bottles do not hinder air circulation inside the cabinet. · 6 EN OPERATING YOUR APPLIANCE MCWC50DST: Wine Cooler · The temperature range of the wine cooler is for 39°F ~ 64°F (4°C ~ 18°C) +/- 5°F. · Temperature Recommendations: Red Wine: 54°F ~ 61°F (12°C ~ 16°C) White Wine: 43°F ~ 50°F (6°C ~ 10°C) · The display indicates the average temperature of the appliance at the moment. Pre-Set Wine Zones · Press the "RED" or "WHITE" pads to choose preset storage conditions for either red or white wine. (The indicator light "RED" or "WHITE" will illuminate accordingly.) · The programmed temperature for red or white wine will be displayed for a few seconds. Manual Temperature Setting · The temperature of the wine cooler can be set anywhere between 39°F ~ 64°F (4°C ~ 18°C) by pressing temperature up and temperature down pads as follows: 1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds). 2) Press the pads to increase or decrease the desired temperature in increments of one degree. 3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed within 10 seconds, your select temperature setting will be automatically confirmed. NOTE: · To select temperature display between Celsius (°C) or Fahrenheit (°F), press the "" pad for approximately 2 seconds. MCBC58DST: Beverage Cooler · The temperature range of the beverage cooler is for 39°F ~ 54°F (4°C ~ 12°C). +/- 5°F. · The display indicates the average temperature of the appliance at the moment. NORMAL Temperature Setting · When the appliance is switched on, or the "NORMAL" pad is pressed, the appliance runs on the temperature setting of 45°F (7°C) and the "NORMAL" indicator light will be illuminated. Manual Temperature Setting · The temperature of the beverage cooler can be set anywhere between 39°F ~ 54°F (4°C ~ 12°C) by pressing temperature up and temperature down pads as follows: 1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds). 2) Press the pads to increase or decrease the desired temperature in increments of one degree. 3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed within 10 seconds, your select temperature setting will be automatically confirmed. NOTE: · The "MANUAL" indicator light will be illuminated while you are manually setting the temperature on the beverage cooler. · To select temperature display between Celsius (°C) or Fahrenheit (°F), press the "" pad for approximately 2 seconds. The following is applicable to both MCWC50DST and MCBC58DST: · The indicator will remain ON during refrigeration cycle and will be OFF during idle cycle. · To switch the Interior light ON/OFF, press the pad. 7 EN Changing The Inner Light Before removing the inner light, turn off the appliance first and then unplug the unit from the wall outlet. Failure to do so could result in electrical shock or personal injury. · Use Phillips screwdriver to take out the screw. · Remove the transparent light cover gently. · Pull out the existing light bulb by unscrewing it counter-clockwise. · Insert new light bulb (E12, max. 15W) by screwing it in clockwise. · Replace the transparent light cover and tighten screw. Automatic Defrost There is no need for manual defrosting of this appliance due to automatic defrosting function. · The ice build-up on the inner back wall during compressor operation will be automatically defrosted once the compressor cycle is off. · Defrost water will drain out passing through the drain outlet in the inner back wall into a drain pan located above the compressor, from where it evaporates. CHANGING THE REVERSIBLE DOOR This appliance is built with a reversible door. You have the choice of either opening it from the left o ...