STAINLESS STEEL BUILT-IN WINE COOLER WITH DUAL TEMPERATURE ZONES AND TOUCH-SCREEN CONTROL PANEL INSTRUCTION MANUAL Model No.: MCWC44DZ To ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance. TABLE OF CONTENTS NAMES OF THE PARTS............................................................... 2 SPECIFICATIONS....................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS........................................... 3 INSTALLATION INSTRUCTIONS BEFORE USING YOUR APPLIANCE...................................... 3 FREE STANDING INSTALLATION......................................... 3 BUILT-IN INSTALLATION..................................................... 4 ELECTRICAL CONNECTION ............................................... 4 APPLIANCE FEATURES................................................................ 5 OPERATING YOUR APPLIANCE TEMPERATURE CONTROL AND DISPLAY .............................. 6 INDICATOR LIGHT .............................................................. 6 STAND BY .......................................................................... 6 LOCK AND UNLOCK ............................................................ 6 TEMPERATURE SETTING .................................................... 7 INTERIOR LIGHT ................................................................ 7 AUTOMATIC DEFROST ................................................................ 7 CARE AND MAINTENANCE CLEANING YOUR APPLIANCE............................................. 8 VACATION TIME................................................................ 8 MOVING YOUR APPLIANCE................................................ 8 ENERGY SAVING TIPS....................................................... TROUBLESHOOTING GUIDE....................................................... APPLIANCE WARRANTY............................................................. 1 8 9 10 EN NAMES OF THE PARTS MODEL NO.: MCWC44DZ 1) Interior Light 2) DC Electric Fan 3) Zone Partition 4) Inner rear 5) Wine Shelf 6) Door Handle 7) Partition Gasket 8) Tempered Glass Door (Touch-Screen Control Panel is on the front of the Glass Door.) SPECIFICATIONS ­ Model # MCWC44DZ Product Description 44 Bottle Built-In Wine Cooler with Dual Temperature Zones and Touch-Screen Control Panel MCWC44DZ Width 23.4" Height 34.4" 104lbs Depth 24.4" Model No. Unit Dimensions ( inches ) Net Weight ( lbs) 2 EN IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: · · · · · · · Read all instructions before using the wine cooler. DANGER or WARNING: Risk of child entrapment. To avoid the possibility of child entrapment, please take the following precautions before throwing out the appliance. - Remove all doors from the unit. - Leave the shelves in place so that children may not easily climb inside. Never allow children to operate, play with, or crawl inside the appliance. Refrigerants: All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal of product. It is the consumer's responsibility to comply with federal and local regulations when disposing of this product. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or an explosion. -Save these instructions- INSTALLATION INSTRUCTIONS Before Using Your Appliance · · Remove the exterior and interior packing. Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from improper handling during transportation. Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 8) · Free-Standing Installation · · This appliance is designed to be installed built-in or free standing. Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 68°F (20°C) or above 90°F (32°C) will hinder the performance of this appliance. This unit is not designed for use in a garage or any other outside installation. Avoid locating the appliance in moist areas. Plug the appliance into dedicated, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. This unit is not designed to be installed in an RV or used with an inverter. After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 3 ~ 4 hours before placing wine bottles in the appliance. · · · 3 EN Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½" wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing. The width of the opening must include the filter panels. Note: The door should protrude at least 1" beyond the surrounding cabinets. Figure A The cutout depth must be 24". Electrical Connection WARNING Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied. This appliance requires a standard 115 Volt A.C. /60Hz electrical outlet with three-prong ground. This appliance is not designed to be used with an inverter. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. Use of an extension cord can negatively affect the performance of the unit. If any problems with the appliance persist, please contact our Customer Service Dept. to consult with a representative at 888 775-0202 or visit our website to request warranty service at www.mcappliance.com. 4 EN APPLIANCE FEATURES Touch-screen Control Panel · Touch-screen control panel is on the front of glass door for convenient temperature reading and setting. You can easily read the zone temperature without opening the door and control your unit just by touching the screen. For details of temperature setting, please see "Operating Your Appliance". (pg. 6-7) Two Temperature Zones · There are two zones in this appliance divided by a partition. · Each zone has its independent temperature control and display. · The upper zone can hold up to 16 bottles. · The lower zone can hold up to 28 bottles. Interior Light · Each zone has its own interior light, which can be switched on or off by pressing the pad (light) on the control panel. Long-life and high efficiency LEDs are installed for durability and energy efficiency. Upper Zone · There are two wine shelves of full depth in the upper zone. Each shelf can holds up to 8 bottles with the bottle necks alternating front to back. · The second supporting guide in the upper zone (counted from top, see illustration "A" on this page) is not designed for wine shelves. Lower Zone · There are also two wine shelves of full depth in the lower zone. Each shelf can holds up to 8 bottles with the bottle necks alternating front to back. · The bottom rack in the lower zone, which consists of two stories, each holds up to 6 bottles with bottle necks facing the front (see illustration below on this page). Engaged Wine Shelves · All the wine shelves have tabs to engage the cabinet on both sides. · Any of the shelves can be removed to accommodate larger bottles. To Remove a Shelf: · Remove all bottles from the shelves. · Lift the shelve upwards and then gently pull out the shelves. To Replace a Shelf: · Place the sides of the shelves back onto the supporting guides of the cabinet and push back until the shelf tabs slide into place. NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles. 5 EN OPERATING YOUR APPLIANCE Temperature Control and Display 1. The temperatures in upper zone and lower zone can be independently controlled and displayed. 2. The temperature in either zone can be controlled between 39°F to 61°F (4 to 16). (The zone temperature may have a tolerance of +/-5°F (+/-3) from setting depending on different loading and ambient conditions.) (warmer) and (colder) near the symbol 3. The temperature display, indicator , control pads (left side) are for upper zone of the wine cooler. 4. The temperature display, indicator , control pads (warmer) and (colder) near the symbol (right side) are for lower zone of the wine cooler. and , and the control pads (lock) and (light) are for both zones. 5. The indicators Indicators Lights · · · indicator light indicates that the unit is in the "Stand by" mode. When lit, the When lit, the indicator light indicates that all of the control pads are locked and no adjustment can be made to the unit. When lit, the indicates that the corresponding zone is in the refrigeration cycle (compressor is running). The indicator will go off once the desired temperature is reached. Note: The light will remain on and the compressor may continue to run for several minutes after the desired temperature is reached. Standby 1. When the unit is plugged in all of the display indicators will light for 3 seconds and an audible beep will be heard. The unit will automatically resume the previous settings from when the unit was unplugged. If the unit was previously in the "Stand By" mode when unplugged it will resume indicator will be lit. in the "Stand By" mode and the 2. You can manually set the unit to the "Stand By" mode by pressing and holding both the and pads simultaneously of the lower zone located on the right side of the control panel for approximately 3 seconds. The control pad must be "unlocked" to set the unit to the "Stand By" mode. The indicator light will illuminate to confirm this setting. Lock and Unlock The lock feature is designed to prevent the settings of your wine cooler from being adjusted accidentally. In order to adjust any of the settings you must unlock the control panel by pressing the "lock" pad for approximately 3 seconds. Once the unit is unlocked an audible beep will be heard and the "lock" indicator light will go out. If no selection is made to adjust the unit in approximately one minute the control panel will automatically return to the "lock" mode. To lock the unit manually press the "lock" pad. 6 EN Temperature setting · Unlock the control panel by pressing the pad for approximately 3 seconds. Once the control panel is unlocked an audible beep will be heard and the indicator will go out. · Under normal conditions the temperature display indicates the current temperature of the corresponding zone. When adjusting the temperature, the temperature display will flash to indicate that the temperature is being adjusted. · The temperature in both upper zone and lower zone can be set independently by pressing (warmer) or (colder) pads that correspond to desired zone. The temperature range of both zones can be set between 39°F to 61°F (4° to 16°) +/- 5°F. · When the pad (warmer) or (colder) is pressed, the temperature displayed will increase or decrease in an increment of one degree. If the pad (warmer) or (colder) is pressed and held for 2 seconds, the temperature displayed will increase or decrease in a speed of one degree per half second. · Once you have adjusted the upper or lower zone to the desired temperature, release the temperature pad. At this time the temperature displayed will flash for approximately 3 seconds to confirm the selected temperature. Once the display stops flashing the temperature display will indicate the current temperature of that zone. Note: The temperature display can be changed between Celsius and Fahrenheit by simultaneously pressing and ho ...