R Model CD110 User Guide CD Player CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT I.H.T. IEC 825 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. i SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions -- All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions -- The safety and operating instructions should be retained for future reference. 3. Heed Warnings -- All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions -- All operating and use instructions should be followed. 5. Water and Moisture -- The appliance should not be used near water -- for example, near a bathtub, wash-bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6. Carts and Stands -- The appliance should be used only with a cart or stand that is recommended by the manufacturer. 7. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 12. Grounding or Polarization -- The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. AC POLARIZED PLUG 13. Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 14. Cleaning -- The appliance should be cleaned only as recommended by the manufacturer. 15. Power Lines-- An outdoor antenna should be located away from power lines. 16. Outdoor Antenna Grounding -- If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Fig. 1. 17. Nonuse Periods -- The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 8. Wall or Ceiling Mounting -- The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 9. Ventilation -- The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 10. Heat -- The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 11. Power Sources -- The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 18. Object and Liquid Entry -- Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 19. Damage Requiring Service -- The appliance should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 20. Servicing -- The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. ii FIGURE 1 EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE INSTRUCYIONS CONTAINED IN ARTICLE 810 -"RADIO AND TELEVISION EQUIPMENT" ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC - NATIONAL ELECTRICAL CODE NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. NOTE:Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user's authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme á la norme NMB-003 du Canada. iii MAIN UNIT (FRONT - CLOSED) zx STANDBY 7 vb 6 OPEN REMOTE CONTROL UNIT CD110 e r u o !1 !3 !6 AMS SCROLL DISPLAY 1 4 7 RANDOM CD TEXT 2 5 8 0 3 6 9 REPEAT TIMER CANCEL PROG. q w t y i !0 !2 !5 !4 MAIN UNIT (FRONT - OPENED) c STANDBY 7 6 OPEN REPEAT DISPLAY Ú1 Ú0 MAIN UNIT (REAR) . , mn REMOTE CONTROLLER RC110CD ANALOG OUT REMOTE CONTROL LEFT IN COAX.--DIGITAL OUT -- OPT. RIGHT OUT REMOTE EXT. INT. CONTROL SELECTOR ) * +, - . iv ABOUT THIS USER GUIDE PRECAUTIONS The following precautions should be taken when operating the equipment. GENERAL PRECAUTIONS When installing the equipment ensure that: ­ the ventilation holes are not covered. ­ air is allowed to circulate freely around the equipment. ­ it is placed on a vibration-free surface. ­ it will not be exposed to excessive heat, cold, moisture or dust. ­ it will not be exposed to direct sunlight. ­ it will not be exposed to electrostatic discharges. In addition, never place heavy objects on the equipment. If a foreign object or water does enter the equipment, contact your nearest dealer or service center. Do not pull out the plug by pulling on the mains lead; grasp the plug. It is advisable when leaving the house, or during a thunderstorm, to disconnect the equipment from the mains supply. 1 ENGLISH Refer to the figures on page iv of this user guide. The numbers on the figures correspond to those in the text. All references to the connections and controls that are printed in BOLD type are as they appear on the unit. COMPACT DISCS The glossy side shining like a rainbow is the front side of the disc, and the side on which the label is printed is the back. Unlike conventional turntables for playing analog discs, the CD110 Compact Disc Player reads the information recorded on the disc from underneath without contacting it using a beam of laser light. Therefore, the performance of a compact disc will not degrade like conventional analog records. Handle discs carefully so as not to damage or scratch the front side. To protect the disc, avoid placing it in the following locations: ­ In direct sunlight or near a source of heat like a heater. ­ In a place which is damp or dirty. ­ In a place which could be exposed to rain, such as near a window. Always keep the disc surface clean. Up to six billion data units are recorded on the front side of the disc. When cleaning the disc surface, always be sure to use a special compact disc cleaner and wipe as shown below. Do not use conventional record cleaner for analog records, as this will adversely affect the disc surface. Store discs properly by placing them in their disc cases. Do not attach a piece of paper or sticker on the label side of disc. When a disc has a piece of plastic tape or rental CD label with paste protruded from the edge or when a disc has a trace of such a sticky object, do not attempt to play the disc. If such a disc is played on the CD player, impossibility of taking out the disc or other malfunction may result. ENGLISH 2 Do not use a disc with a special shape. Do not attempt to play a disc with a special shape such as a heart-shaped disc or octagonal disc. Otherwise the equipment malfunction may result. Wipe in a radial direction. Do not wipe in circumferential direction. q (Standby) button Press to turn the unit's power on or set it to the standby mode. (Operation is not possible if the unit is connected to the SR110, the SR110's rear switch is set to SYSTEM and the CD110's REMOTE CONTROL SELECTOR EXT/INT switch is at EXT.) 4 : Press to play from the start of the track now playing. When they are pressed again within 1 second after it was pressed the first time, play starts from the track before. ¢ : When pressed once, play starts from the next track. w DISPLAY button Press to change what is shown on the display from the disc information to the clock display, etc. (The clock display appears only when the unit is used on its own.) !2 7 (Stop) button Press to stop disc play. !3 1, ¡ buttons 1 : Press to forward-search through the track now playing. ¡ : Press to reverse-search through the track now playing. These buttons cannot be used during MP3 disc play. e SCROLL button Press to scroll the text display of discs that support text. r AMS button Press to play the first 10 seconds of all the tracks on the disc in sequence starting with the first track. !4 8 (Pause) button Press to stop disc play temporarily. !5 PROG. button Press for program play. This button cannot be used with MP3 discs. t Numeric buttons Press to specify track numbers directly. These buttons cannot be used with MP3 discs. !6 CANCEL button Press to cancel a programmed track. y REPEAT button Press for repeat play. Each time the button is pressed, the mode changes in the following sequence: All track repeat fi 1-track repeat fi clear. u RANDOM button Press for random play to play the tracks in a random sequence. i TIMER button Press to set the timer and clock. (These settings can be performed only when the unit is used on its own.) o CD TEXT button Press to switch what is shown on the display from disc information to text when a CD-TEXT compatible disc is used. !0 3 (Play) button Press to start play. 3 ENGLISH REMOTE CONTROL UNIT !1 4, ¢ ...