Model SR3001 User Guide AV Surround Receiver CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 9. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Attachments ­ Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture ­ Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Accessories ­ Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 11. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 2. 10. 3. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (Cable-TV) system installer's attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 4. 5. Ventilation ­ Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power Sources ­ This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 6. 7. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 8. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 12. Grounding or Polarization ­ This product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 16. Lightning ­ For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Power Lines ­ An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Overloading ­ Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry ­ Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing ­ Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service ­ Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way, and When the product exhibits a distinct change in performance this indicates a need for service. 22. Replacement Parts ­ When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check ­ Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting ­ The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat ­ The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 17. 23. e. f. 24. AC POLARIZED PLUG 13. Power-Cord Protection ­ Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Protective Attachment Plug ­ The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. Outdoor Antenna Grounding ­ If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1. 18. 25. 19. FIGURE 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 14. 20. ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS 15. 21. a. GROUNDING CONDUCTORS (NEC SECTION 810-21) POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) b. c. NEC - NATIONAL ELECTRICAL CODE This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. TABLE OF CONTENTS FOREWORD ...........................................1 INTRODUCTION ....................................1 PRECAUTIONS ......................................1 DESCRIPTION .......................................2 FEATURES .............................................3 ACCESSORIES ......................................3 FRONT PANEL ......................................4 FL DISPLAY ........................................................................5 FOREWORD BASIC OPERATION (PLAY BACK).....23 SELECTING AN INPUT SOURCE ...................................23 SELECTING THE SURROUND MODE...........................23 ADJUSTING THE MAIN VOLUME ..................................23 ADJUSTING THE TONE (BASS & TREBLE) CONTROL ......23 TEMPORARILY TURNING OFF THE SOUND ...............23 USING THE SLEEP TIMER .............................................23 NIGHT MODE ..................................................................23 This section must be read before any connection is made to the mains supply. PRECAUTIONS CAUTIONS ON INSTALLATION For heat dispersal, leave at least 8 inch (0.2 m) of space between the top, back and sides of this unit and the wall or other components. · Do not obstruct the ventilation holes. EQUIPMENT MAINS WORKING SETTING Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. SR3001 can be powered by 120V AC only. REAR PANEL .........................................6 REMOTE CONTROL OPERATION .......7 FUNCTION AND OPERATION ..........................................7 PROGRAMMING THE REMOTE CONTROLLER ............8 OPERATION OF REMOTE CONTROL UNIT ...................9 GENERAL INFORMATION OF RC5500SR TO SR3001 ......9 SURROUND MODE .............................24 OTHER FUNCTION ..............................27 ATTENUATION TO ANALOG INPUT SIGNAL ................27 LISTENING THROUGH HEADPHONES .......................27 VIDEO ON/OFF ...............................................................27 DISPLAY MODE ...............................................................27 SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO INPUT ..............................................................................27 RECORDING AN ANALOG SOURCE .............................28 HT-EQ ..............................................................................28 7.1 CH INPUT ...................................................................28 7.1 CH INPUT LEVEL.......................................................29 COPYRIGHT Recording and playback of any material may require consent. For further information refer to the following: -- -- -- -- Copyright Act 1956 Dramatic and Musical Performers Act 1958 Performers Protection Acts 1963 and 1972 any subsequent statutory enactments and orders 8 ins. (0.2 m) or more 8 ins. (0.2 m) or more 7.1CH INPUT STANDBY AUTO POWER ON/ON PHONES HT-EQ MENU AV SURROUND RECEIVER SR3001 INPUT SELECTOR VOLUME DISP SLEEP MULTI AUTO TUNED DIRECT ST V ­ OFF NIGHT PEAK ATT EQ ANALOG DIGITAL SURROUND AUTO SURR DISC 6.1 MT X 6.1 DIGITAL L C R PCM SL LFE S SR DOWN UP 8 ins. (0.2 m) or more SURROUND MODE S.SPEAKER B PURE DIRECT SIMPLE SETUP DISPLAY MEMO CLEAR MUTE ATT ENTER EXIT BAND T-MODE 8 ins. (0.2 m) or more CONNECTIONS ...................................11 SPEAKER PLACEMENT .................................................11 CONNECTING SPEAKERS.............................................11 CONNECTING AUDIO COMPONENTS..........................12 CONNECTING VIDEO COMPONENTS..........................13 ADVANCED CONNECTING ............................................14 CONNECTING THE REMOTE CONTROL JACKS.........14 CONNECTING THE ANTENNA TERMINALS .................15 BASIC OPERATION (TUNER).............30 LISTENING TO THE TUNER ...........................................30 PRESET MEMORY ..........................................................30 INTRODUCTION Thank you for purchasing the Marantz SR3001 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR3001. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer. SURROUND SPEAKER B SYSTEM.....32 MULTI ROOM PLAYBACK USING THE S(SURROUND) SPEAKER B TERMINALS ...............................................32 SETUP ..................................................16 SETUP MENU SYSTEM ..................................................16 ENTER THE DESIRED MENU ITEM OF THE SETUP MENU ....................................................16 SIMPLE SETUP................................................................17 1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT) ........17 2. SPEAKER SETUP........................................................18 3. PREFERENCE .............................................................21 4. SURROUND .................................................................21 5. PL II (DOLBY PRO LOGIC II ) MUSIC PARAMETER ........22 6. CS II (CIRCLE SURROUND II) ..................................22 TROUBLESHOOTING .........................33 TECHNICAL SPECIFICATIONS ..........34 DIMENSIONS ......................................34 1 ENGLISH DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality discrete multichannel digital sound to both movies and music. DTS is a multichannel sound system designed to create full range digital sound reproduction. The no compromise DTS digital process sets the standard of quality for cinema sound by delivering an exact copy of the studio master recordings to neighborhood and home theaters. Now, every moviegoer can hear the sound exactly as the moviemaker intended. DTS can be enjoyed in the home for either movies or music on of DVD's, LD's, and CD's. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. DTS-ES Extended Surround is a new multichannel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTSES Extended Surround greatly improves the 360degree surround impression and space expression thanks to further expanded surround signals. This format has been used professionally in movie theaters since 1999. In addition to the 5.1 surround channels (FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the SB (Surround Back) channel for surround playback with a total of 6.1 channels. DTS-ES Extended Surround includes two signal formats with different surround signal recording methods, as DTSES Discrete 6.1 and DTS-ES Matrix 6.1. "DTS", "DTS-ES" and "Neo:6" are trademarks of Digital Theater Systems, Inc. 3. No new player required: DTS 96/24 can be carried on DVD-video, or in the video zone of DVD-audio, accessible to all DVD players. 4. 96/24 5.1-channel sound with full-quality fullmotion video, for music programs and motion picture soundtracks on DVD-video. "DTS" and "DTS 96/24" are trademarks of Digital Theater Systems, Inc. Dolby Pro Logic IIx is fully compatible with Dolby Surround Pro Logic technology and can optimally decode the thousands of commercially available Dolby Surround encoded video cassettes and television programs with enhanced depth and spatiality. It can also process any high-quality stereo or Advanced Resolution 5.1-channel music content into a seamless 6.1- or 7.1-channel listening experience. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. ENGLISH Dolby Digital identifies the use of Dolby Digital audio coding for such consumer formats as DVD and DTV. As with film sound, Dolby Digital can provide up to five full-range channels for left, center, and right screen channels, independent left and right surround channels, and a sixth ( ".1") channel for low-frequency effects. Dolby Surround Pro Logic II is an improved matrix decoding technology that provides better spatiality and directionality on Dolby Surround program material; provides a convincing three-dimensional soundfield on conventional stereo music recordings; and is ideally suited to bring the surround experience to automotive sound. While conventional surround programming is fully compatible with Dolby Surround Pro Logic II decoders, soundtracks will be able to be encoded specifically to take full advantage of Pro Logic II playback, including separate left and right surround channels. (Such material is also compatible with conventional Pro Logic decoders.) Dolby Digital EX creates six full-bandwidth output channels from 5.1-channel sources. This is done using a matrix decoder that derives three surround channels from the two in the original recording. For best results, Dolby Digital EX should be used with movies soundtracks recorded with Dolby Digital Surround EX. About Dolby Pro Logic IIx Dolby Pro Logic IIx technology delivers a natural and immersing 7.1-channel listening experience to the home theater environment. A product of Dolby's expertise in surround sound and matrix decoding technologies, Dolby Pro Logic IIx is a complete surround sound solution that maximizes the entertainment experience from stereo as well as 5.1-channel encoded sources. The advantages of discrete multichannel systems over matrix are well known. But even in homes equipped for discrete multichannel, there remains a need for high-quality matrix decoding. This is because of the large library of matrix surround motion pictures available on disc and on VHS tape; and analog television broadcasts. The typical matrix decoder of today derives a center channel and a mono surround channel from twochannel matrix stereo material. It is better than a simple matrix in that it includes steering logic to improve separation, but because of its mono, bandlimited surround it can be disappointing to users accustomed to discrete multichannel. Neo:6 offers several important improvements as follow, · Neo:6 provides up to six full-band channels of matrix decoding from stereo matrix material. Users with 6.1 and 5.1 systems will derive six and five separate channels, respectively, corresponding to the standard home-theater speaker layouts. · Neo:6 technology allows various sound elements within a channel or channels to be steered separately, and in a way which follows naturally from the original presentation. · Neo:6 offers a music mode to expand stereo nonmatrix recordings into the five- or six-channel layout, in a way which does not diminish the subtlety and integrity of the original stereo recording. The stereo CD is a 16-bit medium with sampling at 44.1 kHz. Professional audio has been 20- or 24bit for some time, and there is increasing interest in higher sampling rates both for recording and for delivery into the home. Greater bit depths provide extended dynamic range. Higher sampling rates allow wider frequency response and the use of antialias and reconstruction filters with more favorable aural characteristics. DTS 96/24 allows for 5.1channel sound tracks to be encoded at a rate of 96kHz/24bits on DVD-Video titles. When DVD-video appeared, it became possible to deliver 24-bit, 96 kHz audio into the home, but only in two channels, and with serious limitations on picture. This capability has had little use. DVD-audio allows 96/24 in six channels, but a new player is needed, and only analog outputs are provided, necessitating the use of the D/A converters and analog electronics provided in the player. DTS 96/24 offers the following: 1. Sound quality transparent to the original 96/24 master. 2. Full backward compatibility with all existing decoders. (Existing decoders will output a 48 kHz signal) Circle Surround II (CS-II) is a powerful and versatile multichannel technology. CS-II is designed to enable up to 6.1 multichannel surround sound playback from mono, stereo, CS encoded sources and other matrix encoded sources. In all cases the decoder extends it into 6 channels of surround audio and a LFE/subwoofer signal. The CS-II decoder creates a listening environment that places the listener "inside" music performances and dramatically improves both hi-fi audio conventional surround-encoded video material. CS-II provides composite stereo rear channels to greatly improve separation and image positioning ­ adding a heightened sense of realism to both audio and A/V productions. CS-II is packed with other useful feature like dialog clarity (SRS Dialog) for movies and cinema-like bass enrichment (TruBass). CS-II can enable the dialog to become clearer and more discernable in movies and it enables the bass frequencies contained in the original programming to more closely achieve low frequencies ­ overcoming the low frequency limitations of the speakers by full octave. Circle Surround II, Dialog Clarity, TruBass, SRS and symbol are trademarks of SRS Labs, Inc. Circle Surround II, Dialog Clarity and TruBass technology are incorporated under license from SRS Labs, Inc. 2 FEATURES HDCD® (High Definition Compatible Digital ®) is a patented process for delivering on Compact Disc the full richness and details of the original microphone feed. HDCD encoded CDs sound better because they are encoded with 20-bits of real musical information as compared to 16-bits for all other CDs. HDCD overcomes the limitation of the 16-bit CD format by using a sophisticated system to encode the additional four bits onto the CD while remaining completely compatible with the CD format. When listening to HDCD recordings, you hear more dynamic range, a focused 3-D sound stage, and extremely natural vocal and musical timbre. With HDCD, you get the body, depth and emotion of the original performance not a flat, digital imitation. HDCD system manufactured under license from Microsoft. This product is covered by one or more of the following: In the United States 5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531 and in Australia 669,114 with other patents pending. The SR3001 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic IIx (Movie, Music and Game), Circle Surround II (Cinema and Music). In addition, Marantz has focused on the future. By utilizing pre-out jack, 7.1 direct inputs the SR3001 is tomorrow's technology, today! The SR3001 features a fully discrete 7 channel amplifier section capable of delivering 60 watts of high-current amplification, for continuously clean and stable power into each of the seven channels. It employs a massive EI power transformer in combination with oversized filter capacitors. This design configuration is capable of a clear and powerful reproduction of the most demanding action movie soundtracks and full range (multichannel) music discs. Through its ability to generate very high output voltages, the SR3001 can easily drive the most demanding speakers with optimum results. The SR3001 incorporates the most advanced Digital Signal Processing circuitry, along with a Crystal® 192 kHz/24 bit D/A converter in each of the 7 channels. Independent power supply circuits are incorporated for the FL display, audio and video sections for maximum separation, clarity and dynamic range. Together with hand-selected customized components, all elements work in harmony to recreate the emotion, exactly as the artist had intended. The SR3001 is designed and engineered with extensive feedback from dealers and consumers. It features a heavy duty speaker binding posts and an extensive array of both analog and digital inputs / outputs. With 3 assignable digital inputs, 2 component inputs and SACD Multi Channel (7.1 channel) direct inputs is taken to a stunning new level. An easy-to-use universal remote control allows full access to all of the operating functions and can be used for system operation as well. This unit has Simple Setup function for easy setup. You can setup all speaker settings by just selecting your room size and the number of your speakers with Simple Setup function. You can also setup customized settings just like conventional AV amplifiers. The TruSurround Headphone technology provides a surround sound listening experience over headphones. When listening to multichannel content such as DVD movies over headphones, the listening experience is fundamentally different than listening to speakers. Since the headphone speaker drivers are covering the pinna of the ear, the listening experience differs greatly from traditional speaker playback. TruSurround utilizes patented headphone perspective curves to solve this problem and provides a non-fatiguing, immersive, home theater listening experience. TruSurround Headphone also delivers exceptional 3D audio from mono and stereo material. · Dolby Digital EX, Dolby Digital , DTS ES (Discrete 6.1, Matrix 6.1, Neo: 6) · Dolby Pro Logic IIx (Movie, Music, Game) · Circle Surround II (Movie, Music, Mono) · HDCD decording · 7 × 60 Watts (8 Ohm), Discrete Amplifiers · Massive Energy Power Supply, Huge EI Transformer, Large ELCO's. · 192 kHz/24 bit Crystal® DAC for all 7 Channels · 32 bit Digital Surround Processing Chipsets · Video Off Mode · Large Heavy Duty Speaker Terminals for all Channels · Auto Input Signal Detection · Improved Station Name Input Method, 50 Presets · Auto Adjust Function for Speaker Distance Settings (Delay Time) · Universal remote control · Simple Setup Function ACCESSORIES Remote Controller RC5500SR PO WE R TV TUNE R CD VO TV L. X1 AU SLEE P MU D OS ME TE MA VO IN L. P AM TAPE CDR/M D VCR1 DSS/V CR2 D DV NU S-D NIG HT DIS CLEA R ME BA SS TREB INP CH.SE L SY STEM UT/DI T-M SC+ AUDIO SUBT/A TT Y PT OD E RD S F.D IRE CT LE TU NE /S EA RC H CHAN MO D A/ IRE CT SE T.T TUP/ ON E AU TO ME PLAY NU OFF MC H-ST EO ER ST 7.1CH IN NEL/S KIP RE MO RC 5500 TE CO SR NTRO LLER LIP .SY NC AAA-size batteries × 2 AM Loop Antenna FM Antenna User Guide 3 ENGLISH E N E T R 1 II CS 4 5 8 9 P.SC AN /VOFF 2 S /E EX S DT 7 0 3 L UA RT VI 6 FRONT PANEL qw e r ty u i AV SURROUND RECEIVER SR3001 INPUT SELECTOR VOLUME o !0 !1 !2 !3 DISP SLEEP MULTI AUTO TUNED DIRECT ST V ­ OFF NIGHT PEAK ATT EQ ANALOG DIGITAL SURROUND AUTO SURR DISC 6.1 MTX 6.1 DIGITAL L C Notes: · The surround mode is automatically switched to AUTO when the pure direct function is turned on. · Additionally, Speaker Configurations are fixed automatically as follows. Front SPKR = Large, Center SPKR = Large, Surround SPKR = Large, Sub woofer = On · This function is unavailable when the surround speaker B system is activated. While this function is activated, this function will be canceled if the S. SPEAKER B button is pressed. !4 MUTE button ENGLISH Press this button to mute the output to the speakers. Press it again to return to the previous volume level. !5 T-MODE button Press this button to select the auto stereo mode or mono mode when the FM band is selected. The "AUTO" indicator lights in the auto stereo mode. (See page 30) R PCM SL LFE S SR DOWN UP !6 i SIMPLE SETUP button Press this button to enter the simple setup mode. You can setup the speaker conditions (speaker sizes, number of speakers, speaker delay times) quickly by pressing the cursor buttons. BAND button SURROUND MODE 7.1CH INPUT S. SPEAKER B PURE DIRECT SIMPLE SETUP DISPLAY MEMORY CLEAR MUTE ATT Press this button to switch between FM and AM in the TUNER mode. STANDBY AUTO POWER ON/STANDBY PHONES HT-EQ MENU ENTER EXIT BAND T-MODE !7 EXIT button o DISPLAY button This button is used to exit from the SETUP MAIN MENU. @2 @1 @0 !9 !8 !7 !6 !5 !4 When this button is pressed, the FL display mode is changed as Surround Mode Auto-display Off Display Off Input Function and the display off indicator(DISP) lights up in condition of DISPLAY OFF. !8 Cursor (1, 2, 3, 4) / ENTER button Use these buttons when operating the SETUP MAIN MENU and TUNER function. q POWER switch and STANDBY indicator r !9 S.(Surround) SPEAKER B button !0 MEMORY button Press this button to enter the tuner preset memory numbers or station names. (See page 30) MENU button This button is used to enter the SETUP MAIN MANU. When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated. Press this button to activate the Surround Speaker B system . "SPKR B" indicator will be illuminated in the display. (See page 33) @0 HT-EQ button t w INFRARED receiving sensor window !1 CLEAR button 7.1CH INPUT button Press this button to cancel the station-memory setting mode or preset scan tuning. (See page 31) Used to turn on or off HT(Home Theater)-EQ mode. This mode compensates for the audio portion of a movie sounding "bright". When this button is pressed, "EQ" indicator lights up. Press this button to select the output of an external multichannel player. This window receives infrared signals for the remote control. !2 VOLUME control knob @1 AUTO (Auto surround) button e y INPUT SELECTOR knob (AUDIO/ VIDEO) SURROUND MODE button Adjusts the overall sound level. Turning the control clockwise increases the sound level. You can select the surround mode by pressing this button. This knob is used to select the input sources. The video function selector, such as TV, DVD, VCR1 and DSS, selects video and audio simultaneously. Audio function sources such as CD, TAPE, CDR/MD, and TUNER may be selected in conjunction with a Video source. This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source first, and then choose a different audio source to activate this function. !3 ATT (Attenuate) button Press this button to select the AUTO mode from the surround modes. When this mode is selected, the receiver determines the surround mode corresponding to a digital input signal automatically. u PURE DIRECT button When this button is pressed, the tone control circuitry is bypassed as well as Bass Management. DIRECT indicator will be illuminated in the display. If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button. "ATT" is displayed when this function is activated. The signal-input level is reduced by about half. Attenuation will not work with the output signal of "REC OUT" (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input function. 4 This jack may be used to listen to the SR3001's output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use. Notes: · When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE button. · The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack. s a DISP d f AUTO AUTO SURR TUNED DIRECT g h ST V ­ OFF j l ¡1 ¡3 k ¡0 ¡2 NIGHT PEAK B ATT EQ ANALOG DIGITAL ¡4 SURROUND 2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24, PCM When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use. ¡7 SLEEP DISC 6.1 MTX 6.1 SPKR DIGITAL L C ¡5 R ENCODED CHANNEL STATUS indicators PCM SL LFE S SR ¡6 a DISP (Display Off) indicator j ¡8 NIGHT mode indicator ¡5 This indicator is illuminated when the SR3001 is in the display off condition. This indicator is illuminated when the SR3001 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels. These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, "L", "C", "R", "SL", "SR" and "LFE" will be illuminated. If the digital input signal is 2 channel PCM-audio, "L" and "R" will be displayed. If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal comes in, "L", "C", "R", "SL", "S" , "SR" and "LFE" will be illuminated. ¡6 Main Information Display s SLEEP timer indicator This indicator is illuminated when the sleep timer function is active. k SPKR (Speaker) B indicator This indicator is illuminated when the S(Surround) speaker B system is active. This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit's operation. d AUTO SURR (Auto Surround mode) indicator ¡7 DIRECT (Pure direct) indicator l PEAK indicator This indicator is illuminated to show that the AUTO SURROUND mode is in use. f TUNER's indicators This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button on the front panel or the remote. This indicator is illuminated when the SR3001 is in the PURE DIRECT mode. ¡8 HDCD indicator When HDCD signal is decoded from digital input, this indicator will light up. AUTO : This indicator illuminates when the tuner's Auto mode is in use. TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality. ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo condition. ¡0 EQ mode indicator This indicator is illuminated when the HT-EQ function is active. ¡1 ATT (Attenuation) indicator This indicator is illuminated when the attenuation function is active. g DTS-ES mode indicators (DISC6.1, MTX6.1) ¡2 DIGITAL Input Indicator These indicators will illuminate to show the DTS-ES decoding mode (Discrete 6.1 or Matrix 6.1). This indicator lights when a digital input has been selected. h V (video)-OFF mode indicator ¡3 ANALOG input indicator This indicator is illuminated when the Video-OFF function is active. This indicator is illuminated when an analog input source has been selected. 5 ENGLISH @2 HEADPHONE jack for stereo headphones FL DISPLAY ¡4 SIGNAL FORMAT indicators REAR PANEL z x c v bn RC-5 VIDEO FM (75) OUT VCR1 SL C IN n DIGITAL INPUT (Dig.1 - 3) (coaxial, optical) /1 Subwoofer Output ENGLISH m, There are 2 digital inputs with coaxial jacks, 1 with optical jack. The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component. AC IN Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplifier, connect a "Y" connector to the subwoofer output jack and run one cable from it to each subwoofer amplifier. SVIDEO Y DVD SBL MONITOR IN OUT OUT IN DSS / VCR2 IN OUT VCR1 MONITOR L GND AM ANTENNA L DVD TV m MODEL NO. SR3001 DVD DSS / VCR 2 MONITOR CB/ PB COMPONENT VIDEO INPUT/ OUTPUT R IN CD OUT TAPE IN OUT CDR/MD IN OUT DSS / VCR2 IN OUT VCR1 R DVD TV SR SW 7.1CH INPUT SBR 1 2 3 CR/ PR AUDIO DIGITAL INPUT COMPONENT VIDEO R L R L R L FRONT SUBWOOFER OUT SURROUND BACK S. SPEAKER B SURROUND CENTER SPEAKER SYSTEMS 6 - 8 OHMS /1 z /0 c . VIDEO IN/OUT (TV, DVD, VCR1, DSS/VCR2) If your DVD player or other device has component video connectors, be sure to connect them to these component video connectors on the SR3001. The SR3001 has two component video input connectors to obtain the color information (Y, CB, CR) directly from the recorded DVD signal or other video component and one component video output connector to output it directly into the matrix decoder of the display device. By sending the pure DVD component video signal directly, the DVD signal forgoes the extra processing that normally would degrade the image. The result is vastly increased image quality, with incredibly life like colors and crisp detail. AUDIO IN/OUT (CD, TAPE, CD-R/ MD, TV, DVD, VCR1, DSS/VCR2) , AC Power Cord These are the analog audio inputs and outputs. There are 7 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc.... The audio inputs and outputs require RCA-type connectors. These are the video inputs and outputs. There are 4 video inputs and 2 video outputs and each one includes both composite video and S-video configurations. Connect VCRs, DVD players, and other video components to the video inputs. The 2 video output channels can be used to be connected to video tape recorders for making recordings. Connect to an AC power outlet. SR3001 has to be powered by 120V AC only. . 7.1 CHANNEL INPUT x FM antenna terminal (75 ohms) By connecting a DVD Audio player, SACD multichannel player, or other components that has a multichannel port, you can playback the audio with 5.1 channel or 7.1 channel outputs. Connect an external FM antenna with a coaxial cable, or a cable network FM source. v MONITOR OUT This is a monitor output and each one includes both composite video and S-video configurations. /0 Speaker outputs terminals AM antenna and ground terminals Connect the supplied AM loop antenna. Use the terminals marked "AM" and "GND". The supplied AM loop antenna will provide good AM reception in most areas. Position the loop antenna until you hear the best reception. b REMOTE CONT. IN/OUT terminals Seven terminals are provided for the front left, front right, front center, surround left, surround right, surround back left and surround back right speakers. Note: You can use surround back speaker terminals as S(Surround) SPEAKER B terminals, when you use no surround back speaker. Connect to a Marantz component equipped with remote control (RC-5) terminals. 6 REMOTE CONTROL OPERATION FUNCTION AND OPERATION The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote control unit changes when one of the input selector buttons is pressed. Lights up during a button is pressed and an infrared signal is sending. (when AMP mode is selected) Use these button when operating the SETUP MAIN MENU. x (Main) POWER buttons , MENU OFF button (when AMP mode is selected) This button is used to exit from the SETUP MAIN MENU. (when AMP mode is selected) Press to switch the power of the SR3001 ON or OFF after pressing the AMP button. When the input signal is too high and the voice distorts even while adjusting the SR3001 VOLUME control, turn on this function. "ATT" is illuminated when this function is activated. The input level is reduced. Attenuator is invalid for the output signal of "REC OUT". Note: This function is unavailable while the digital input is selected. c