Mainboard User's Manual This publication, photographs, illustrations and software are under the protection of international copyright laws and all rights reserved. It does not allow any reproduction of this manual, content and any materials contained herein without the written consent of the authentic manufacturer. The information in this manual is subject to change without notice. The manufacturer does neither represent nor warrant the contents hereof; and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, the manufacturer reserves the right to revise and change this publication from time to time, without the obligation of notifying any person of such revision or changes. Trademarks IBM, VGA, and PS/2 are registered trademarks of International Business Machines. Intel, Pentium, Pentium-II, Pentium-III, Pentium-IV, MMX, Celeron and Tualatin are registered trademarks of Intel Corporation. Microsoft, MS-DOS and Windows 95/98/NT/2000 are registered trademarks of Microsoft Corporation. PC-cillin is a trademark of Trend Micro Inc. Award is a trademark of Award Software Inc. A3D is a registered trademark of Aureal Inc. SuperVoice is a registered trademark of Pacific Image Communications Inc. MediaRing Talk is a registered trademark of MediaRing Inc. 3Deep is a registered trademark of E-Color Inc. Other names used in this publication may be trademarks and are acknowledged. Copyright © 2001 All Rights Reserved MS7188D Series, V5.2 V8601T/December 2001 Mainboard User's Manual II Mainboard User's Manual Table of Contents Trademarks .............................................................................. I Chapter 1......................................................................................... 1 Introduction ................................................................................. 1 Key Features ........................................................................... 2 Package Contents .................................................................... 4 Static Electricity Precautions .................................................. 5 Pre-Installation Inspection ...................................................... 5 Chapter 2......................................................................................... 7 Mainboard Installation ................................................................ 7 Mainboard Components.......................................................... 8 I/O Ports.................................................................................. 9 Install A CPU.......................................................................... 9 Install Memory...................................................................... 11 Setting Jumper Switches ....................................................... 12 Install the Mainboard ............................................................ 15 Optional Extension Brackets................................................. 17 Install Other Devices ............................................................ 18 Expansion Slots..................................................................... 20 Chapter 3....................................................................................... 23 BIOS Setup Utility .................................................................... 23 Introduction........................................................................... 23 Running the Setup Utility ..................................................... 24 Standard CMOS Features Page............................................. 25 Advanced BIOS Features Page............................................. 26 Advanced Chipset Features Page.......................................... 28 Integrated Peripherals Page................................................... 30 Power Management Setup Page............................................ 32 PnP/PCI Configurations Page ............................................... 34 Hardware Monitor Page........................................................ 36 Frequency/Voltage Control................................................... 37 Load BestPerf. Defaults ........................................................ 38 Load Optimized Defaults...................................................... 38 Set Password ......................................................................... 38 Save & Exit Setup................................................................. 39 Exit Without Saving.............................................................. 39 Using the Mainboard Software ..................................................... 41 About the Software CD-ROM................................................... 41 Drivers Installation.................................................................... 42 III Mainboard User's Manual Utility Software Reference........................................................ 43 IV 1: Introduction Chapter 1 Introduction This mainboard has a Socket-370 processor socket for Intel FCPGA Celeron, FCPGA Pentium III or Tualatin/Tualatin Celeron processors. You can install any one of these processors on this mainboard. This mainboard supports front-side bus speeds of 66MHz, 100MHz or 133MHz. This mainboard uses the VIA 8601T chipset to integrate a 3D Graphics Accelerator and Ultra DMA 33/66/100 function. The mainboard has a built-in AC97 Codec, and an AMR (Audio Modem Riser) slot to support Audio and Modem application. In addition, this mainboard has an extended set of ATX I/O Ports including PS/2 keyboard and mouse ports, two USB ports, a parallel port, a VGA port, a serial port, a game port and audio ports. An extra USB header gives you the option of connecting two more USB ports. This mainboard has all the features you need to develop a powerful multimedia workstation. The board is Micro ATX size and has a power connector for an ATX power supply. 1 Mainboard User's Manual Key Features The key features of this mainboard include: Socket-370 Processor Support Supports FCPGA Celeron, FCPGA Pentium III and Tualatin/Tualatin Celeron CPUs Supports 66MHz, 100MHz or 133MHz Front-Side Bus All processors are automatically configured using firmware and a synchronous/asynchronous Host/DRAM Clock Scheme. Note : Do not support PPGA Celeron CPU. Do not try to install PPGA Celeron processor in Socket-370. Memory Support Two DIMM slots for 168-pin SDRAM memory modules Support for 100/133 MHz memory bus Maximum installed memory is 2 x 512MB = 1GB Expansion Slots One AMR slot for a special audio/modem riser card Three 32-bit PCI slots for PCI 2.2-compliant bus interface. One 8/16-bit ISA slot. Onboard IDE channels Primary and Secondary PCI IDE channels Support for PIO modes, Bus Mastering and Ultra DMA 33/66/100 modes Power Supply and Power Management ATX power supply connector ACPI and previous PMU support, suspend switch Supports Wake on LAN and Wake on Alarm Built-in Graphics System Onboard 64-bit 2D/3D graphic engine and Video Accelerator with advanced DVD video 2 to 8 MB frame buffer use system memory Supports high resolutions up to 1600x1200 2 1: Introduction AC97 Codec Compliant AC97 2.1 specification Supports 18-bit ADC (Analog Digital Converter) and DAC (Digital Analog Converter) as well as 18-bit stereo fullduplex codec Onboard I/O Ports Provides PC99 Color Connectors for easy peripheral device connections Floppy disk drive connector with 1Mb/s transfer rate One serial ports with 16550-compatible fast UART One parallel port with ECP and EPP support Two USB ports, and optional two USB ports module Two PS/2 ports for keyboard and mouse One infrared port connector for optional module Hardware Monitoring Built-in hardware monitoring for CPU & System temperatures, fan speeds and mainboard voltages Onboard Flash ROM Automatic board configuration support Plug and Play of peripheral devices and expansion cards Bundled Software PC-Cillin2000 provides automatic virus protection under Windows 95/98/NT/2000 SuperVoice is data, fax and voice communication software MediaRing Talk provides PC to PC or PC to Phone internet phone communication 3Deep delivers the precise imagery and displays accurate color in your monitor WinDVD2000 is a DVD playback application (optional) Dimensions Micro ATX form factor (24.4cm x 19cm) 3 Mainboard User's Manual Package Contents Your mainboard package ships with the following items: ! The mainboard ! This User's Guide ! 1 UDMA/66 IDE cable ! 1 Floppy disk drive cable ! Support software on CD-ROM disk Optional Accessories You can purchase the following optional accessories for this mainboard. ! Extended USB module 4 1: Introduction Static Electricity Precautions Static electricity could damage components on this mainboard. Take the following precautions while unpacking this mainboard and installing it in a system. 1. Don't take this mainboard and components out of their original static-proof package until you are ready to install them. 2. While installing, please wear a grounded wrist strap if possible. If you don't have a wrist strap, discharge static electricity by touching the bare metal of the system chassis. 3. Carefully hold this mainboard by its edges. Do not touch those components unless it is absolutely necessary. Put this mainboard on the top of static-protection package with component side facing up while installing. Pre-Installation Inspection 1. Inspect this mainboard whether there are any damages to components and connectors on the board. 2. If you suspect this mainboard has been damaged, do not connect power to the system. Contact your mainboard vendor about those damages. 5 Mainboard User's Manual 6 2: Mainboard Installation Chapter 2 Mainboard Installation To install this mainboard in a system, please follow these instructions in this chapter: ! ! ! ! ! ! ! Identify the mainboard components Install a CPU Install one or more system memory modules Make sure all jumpers and switches are set correctly Install this mainboard in a system chassis (case) Connect any extension brackets or cables to connecting headers on the mainboard Install other devices and make the appropriate connections to the mainboard connecting headers. Note: 1. Before installing this mainboard, make sure the jumper BAT1 is set to Normal setting. See this chapter for information about locating jumper BAT1 and the setting options. 2. Never connect power to the system while installing; otherwise, it may damage the mainboard. 7 Mainboard User's Manual Mainboard Components This diagram helps you identify major components on this mainboard. Note: Any jumpers on your mainboard but not appearing in this illustration are for testing only. 8 2: Mainboard Installation I/O Ports This illustration shown below is a side view of the built-in I/O ports on this mainboard. PS/2 Mouse Parallel Port VGA Port Game/MIDI Port PS/2 Keyboard USB Ports Line-Out Jack Serial Port COM1/3 Microphone Jack Line-In Jack Install A CPU This mainboard has a Socket 370 supporting FCPGA Celeron, FCPGA Pentium III and Tualatin/Tualatin Celeron processors. Do not support PPGA Celeron processor. To ensure reliability, ensure that your processor has a heatsink/cooling fan assembly. Do not try to install a Socket 7 processor in the Socket-370. A Socket 7 processor such as the Pentium-MMX, or the AMD K5/K6 does not fit in the Socket 370. Do not try to install PPGA Celeron processor in Socket-370. The following list notes the processors that are currently supported by this mainboard. FCPGA Celeron: 300~966 MHz, FSB: 66 MHz FCPGA Pentium III: 500~1130MHz, FSB: 100MHz, 133MHz Tualatin/Tualatin Celeron : up to 1.2GHz, FSB: 100MHz 9 Mainboard User's Manual Installing a Socket-370 Processor Install a processor into the ZIF (Zero Insertion Force) Socket-370 on the mainboard. 1. Locate the Socket-370 and JFAN1. Pull the locking lever out slightly from the socket and raise it to the upright position. 10 2: Mainboard Installation Install Memory This mainboard has two DIMM sockets for system memory modules. You must install at least one memory module in order to work out this mainboard. DIMM2 DIMM1 For this mainboard, you must use 168-pin, 3.3V unbuffered PC100 or PC133 SDRAM memory modules. You can install any size memory module from 32 MB to 512 MB, so the maximum memory size is 2 x 512 MB = 1 GB. Edge connectors on the memory modules have cut outs coinciding with spacers in the DIMM sockets that memory modules can only be installed in the correct orientation. To install a module, push the retaining latches at either end of the socket outwards. Position the memory module correctly and insert it into the DIMM socket. Press the module down into the socket so that the retaining latches rotate up and secure the module in place by fitting into notches on the edge of the module. Mainboard User's Manual Setting J ...