MAXDATA PLATINUM 100 I M7 User's Manual 2 Contents Contents 1 Setting up the System 5 Safety Information ...................................................................................................................................5 Server Position ...................................................................................................................................5 System Access Warnings ..................................................................................................................6 Powering up the System .........................................................................................................................7 2 Board Features 9 Connector and Header Locations ..........................................................................................................10 Configuration Jumpers ..........................................................................................................................11 Back Panel Connectors .........................................................................................................................12 Hardware Requirements .......................................................................................................................13 Memory ............................................................................................................................................13 3 Hardware Installations and Upgrades 15 Before You Begin ..................................................................................................................................15 Tools and Supplies Needed ..............................................................................................................15 Installing and Removing Memory ..........................................................................................................15 Installing DIMMs ..............................................................................................................................15 Replacing the Backup Battery ...............................................................................................................17 4 Server Utilities 19 Using the BIOS Setup Utility .................................................................................................................19 Starting Setup...................................................................................................................................19 If You Cannot Access Setup.............................................................................................................19 Setup Menus ....................................................................................................................................19 Clearing the CMOS ...............................................................................................................................21 Configuring the System for embedded Serial ATA RAID ......................................................................22 Configuring the BIOS .......................................................................................................................22 Creating your RAID set.....................................................................................................................22 Loading the RAID Drivers .................................................................................................................22 5 Regulatory and Compliance Information 23 Product Regulatory Compliance ............................................................................................................23 Product Safety Compliance ..............................................................................................................23 Product RoHS Compliance ...............................................................................................................23 Product EMC Compliance ...............................................................................................................23 Product Regulatory Compliance Markings .......................................................................................23 Electromagnetic Compatibility Notices .................................................................................................23 Europe (CE Declaration of Conformity) ............................................................................................23 MAXDATA PLATINUM 100 I M7 3 Figures 1. 2. 3. 4. 5. 6. 7. PLATINUM 100 I Controls .................................................................................................................7 Board Connector and Component Locations ..................................................................................10 Configuration Jumpers ....................................................................................................................11 Back panel Connectors ...................................................................................................................12 Installing DIMMs .............................................................................................................................15 Removing the Battery .....................................................................................................................18 Clearing the CMOS .........................................................................................................................21 Tables 1. 2. 3. 4. 5. 6. 7. Feature Summary ..............................................................................................................................9 Board Connectors and Components ...............................................................................................10 Configuration Jumpers ....................................................................................................................11 Back panel Connectors ...................................................................................................................12 NIC LEDs .........................................................................................................................................12 Keyboard Commands ......................................................................................................................20 Product Certification Markings ........................................................................................................23 4 Contents 1 Setting up the System Safety Information Server Position Please take note of the following criteria for creating a practical and safe workplace when setting up your computer: ! CAUTION The system can be used anywhere the temperature is suitable for people. However, rooms with humidity over 70%, and dusty or dirty areas are not appropriate. In addition, do not expose the server to any temperatures over +30°C or under +10°C. ! CAUTION For proper cooling and airflow, operate the system only with the chassis covers installed. ! CAUTION Make sure that the cables connecting the server to peripheral devices are not tight. ! CAUTION Make sure that all power and connection cables are positioned so that they are not trip hazards. ! CAUTION When you save data to your server`s hard disks or to a floppy disk, they are stored as magnetic information on the media. Make sure that they are not damaged by magnetic or electromagnetic fields. ! CAUTION Because the electronics in your computer can be damaged by jarring, no mechanical devices should be placed on the same surface as the server. This is especially important for impact printers whose vibrations could damage the hard disk. ! CAUTION Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result. ! CAUTION Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and other parts. We recommend that you perform all procedures in chapter 3 only at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis ground - any unpainted metal surface - on your server when handling parts. ! ATTENTION In order to fully separate the server from current, the power cord must be removed from the wall outlet. ! ATTENTION To ensure stability, the floor stands must be turned outwards (pedestal version only). MAXDATA PLATINUM 100 I M7 5 System Access Warnings ! CAUTION To avoid personal injury or property damage, the following safety instructions apply whenever accessing the inside of the product: · · · · · · · · Turn off all peripheral devices connected to this product. Turn off the system by pressing the power button to off. Disconnect the AC power by unplugging all AC power cords from the system or wall outlet. Disconnect all cables and telecommunication lines that are connected to the system. Retain all screws or other fasteners when removing access cover(s). Upon completion of accessing inside the product, refasten access cover with original screws or fasteners. Do not access the inside of the power supply. There are no serviceable parts in the power supply. Return to manufacturer for servicing. Power down the server and disconnect all power cords before adding or replacing any non hotplug component. When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced before removing the power supply from the server. ! CAUTION If the server has been running, any installed processor(s) and heat sink(s) may be hot. Unless you are adding or removing a hot-plug component, allow the system to cool before opening the covers. To avoid the possibility of coming into contact with hot component(s) during a hotplug installation, be careful when removing or installing the hot-plug component(s). ! CAUTION To avoid injury do not contact moving fan blades. If your system is supplied with a guard over the fan, do not operate the system without the fan guard in place. 6 Setting up the System Powering up the System At the front of the case, you can find the necessary controls like power button and the HDD LEDs. Press the power button one time briefly in order to boot the server. Figure 1. PLATINUM 100 I Controls A. B. C. D. Power switch Power LED HDD LED Key Lock MAXDATA PLATINUM 100 I M7 7 8 2 Board Features This chapter briefly describes the main features of the mainboard. Table 1 summarizes the major features of the board. Table 1. Feature Summary Feature Processor Description · Support for one Intel® Xeon® Processor 3000 Sequence, Intel® Pentium® D, Pentium® 4 or Celeron® D processor · Supports Intel® Dual Core Architecture · Supports Intel® Hyper-Threading Technology · Supports Intel® Extended Memory System 64 Technology (EM64T) · 4 DIMM sockets supporting 533/667 MHz ECC or non-ECC unbuffered stacked DDR2 DIMMs · Data bandwidth per channel of 4.2 GB/s or 8.4 GB/s in dual channel when using DDR2 667 MHz · Support for up to two DDR2 channels for a total of 4 DIMMs (2 DIMMs / Channel) providing up to 8 GB max memory capacity Intel® 3000 chipset, consisting of: · Intel® 3000 MCH Memory Controller Hub · Intel® ICH7R I/O Controller Hub Super I/O: SMsC SCH5027 External connections: · Stacked PS2 Keyboard/Mouse connections · DB9 Serial A port · One RJ45 NIC connector for 10/100/1000 Mbps connections · Two USB 2.0 ports Internal connections: · One USB port header which supports two USB 2.0 ports · One DH10 Serial B header · Four SATA connectors with integrated RAID 0/1/10 support · One ATA-100 connector · ATX-compliant 24-pin control panel header Video Expansion Capabilities On-board ATI ES1000 video controller with 16 MB external video memory · Two full length 32 bit / 33 MHz, 3.3 V Universal PCI connectors · One x8 PCI Express connector · One physical x8 PCI Express connector (operating at x4 lane speed) · Ultra ATA100 support: One IDE channel capable of supporting up to two drives. · SATA support: Four independent SATA ports support data transfer rates up to 3.0 Gbit/s per port Support for up to four system fans and one processor fan Intel® System Management Software Memory Chipset I/O Control Hard drive Fans System Management MAXDATA PLATINUM 100 I M7 9 Connector and Header Locations Figure 2 shows the approximate location of the major components on board. A BC D EFG H I J K LL L M KK JJ II HH GG FF EE DD CC AA Y BB Z X W VU T SR Q P O N Figure 2. Board Connector and Component Locations Table 2. Board Connectors and Components Label Description A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. P . Q. R. S. Video Memory PCI 32/33 Slot 2 ATI ES1000 ...