User manual MEDION AKOYA P7300 D MD 8838 PC

Notes on this Manual Keep these instructions with your computer at all times. The proper set up, use and care can help extend the life of your computer. In the event that you transfer ownership of this computer, please provide these instructions to the new owner. This manual is divided into sections to help you locate the information you require. Along with the Table of Contents at the beginning of this manual, an Index has been provided to help you find topical information. If you want to start up your PC immediately, please read the chapters Operational Safety (page 3) and Setting up and Getting Started (page 8). We strongly recommend you read this entire manual to ensure the proper set-up and operation of your PC. Many application programs incorporate extensive help functions. As a general rule, you can access help functions by pressing F1 on the keyboard. These help functions will be ® available to you while you are using the Microsoft Windows operating system or the respective application program. ® Windows Vista offers you additional aids to learn about the new version of Windows and your PC. You can find this information in the Welcome Center after booting up your PC. We have listed further useful sources of information starting on page 55. Audience These instructions are intended for both the novice and advanced user. Regardless of the possible professional utilisation, this PC is designed for day-to-day household use. The functions and applications for use with this PC have been designed with the entire family in mind. Purchase Details Enter your purchase details below for quick reference. Serial Numbers (i.e. Microsoft ) Place and date of Purchase ® ...................................... ...................................... ...................................... You will find the PC serial number on the rear of the PC. Also copy this number into your guarantee documents, if necessary. UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Quality Medion has selected the components in this computer for their high level of functionality, ease of use, safety and reliability. Through balanced hardware and software design we are able to provide you with an innovative personal computer useful for applications relating to both work and leisure. We are pleased to welcome you as our newest customer. Thank you for choosing our products. © 2008 Medion . All rights reserved. Microsoft®, MS-DOS®, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. Pentium® is a registered trademark of Intel Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Information in this document is subject to change without notice. ® - ii UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Table of contents Safety............................................................................................................ 1 Operational Safety.......................................................................................................3 Data Security............................................................................................................4 Setting Up & Getting Started ....................................................................... 5 Included with your PC.................................................................................................7 Setting Up ...................................................................................................................8 Set-up Location........................................................................................................8 Ambient Temperature ..............................................................................................8 Ergonomics ..............................................................................................................9 Connecting ...............................................................................................................11 Cabling ..................................................................................................................11 Front Connectors ...................................................................................................12 Connecting Speakers/Audio Output ......................................................................13 PCs with Surround Sound...................................................................................13 Connecting a Sound Source/Audio Input...............................................................13 LAN Connection.....................................................................................................14 Connecting IEEE 1394 (Fire Wire) Devices ..............................................................14 Connecting USB Devices ........................................................................................15 Installing wireless keyboard & mouse .................................................................16 Connecting Serial Devices ......................................................................................19 Connecting PS/2 Devices .......................................................................................19 TV-out....................................................................................................................19 Connecting the Monitor.........................................................................................20 Antenna Connection for TV....................................................................................21 DVB-S TV reception.............................................................................................21 Analogue TV reception .......................................................................................21 DVB-T TV reception.............................................................................................21 Connecting headphones ........................................................................................22 Connecting a Microphone .....................................................................................22 Connecting a Recording Source / Video Inlet .........................................................22 Connecting S-ATA devices......................................................................................23 Remove S-ATA devices ........................................................................................23 Connecting the Power Supply ...............................................................................24 Getting Started..........................................................................................................25 Step 1: Power On...................................................................................................25 Switch ................................................................................................................25 On/off Switch .....................................................................................................25 Step 2: Starting Initial Setup...................................................................................26 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Step 3: Finalising....................................................................................................27 Short Description of the Windows® Desktop ........................................................27 Operation ................................................................................................... 29 The Mouse ................................................................................................................31 Battery save function..............................................................................................31 The Keyboard ............................................................................................................32 The Alt and Ctrl Keys ..............................................................................................32 Multimedia functions .............................................................................................33 The Hard Drive ..........................................................................................................34 Important Directories .............................................................................................35 Connecting an external hard drive .........................................................................36 The Optical Drive ......................................................................................................37 Loading a Disc:.......................................................................................................37 Playing Back and Retrieving Data from Discs ..........................................................37 How to Remove a Disc ...........................................................................................38 The Optical Drive as Boot Drive..............................................................................38 Regional Playback Information for DVD..................................................................38 Subjects Concerning the CD/DVD-Rewriter............................................................39 The Card Reader ........................................................................................................40 The Graphics Card.....................................................................................................41 Personalize appearance and sounds.......................................................................41 Connecting the PC to a Television..........................................................................42 How to Connect the PC to a Television: ..............................................................43 The Sound Card ........................................................................................................44 IEEE 1394 (Fire Wire)..................................................................................................45 Application Options for IEEE1394...........................................................................45 Technical Specifications .........................................................................................45 USB Port ....................................................................................................................46 The Network .............................................................................................................47 What is a Network? ................................................................................................47 Wireless LAN ..........................................................................................................47 Safety Note .........................................................................................................47 Conditions ..........................................................................................................48 Troubleshooting within the Network .....................................................................49 The TV Tuner Card ....................................................................................................50 Watch TV ...............................................................................................................50 The Remote Control ..................................................................................................50 - iv UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Inserting Batteries ..................................................................................................50 Button layout .........................................................................................................51 Changing the transmission/reception channels......................................................53 Serial COM Port.........................................................................................................54 Software....................................................................................................................55 Getting to Know Windows Vista® ............................................................................55 Windows Vista® ­ Quick Start Guide ....................................................................55 Windows Vista® - Help and Support.....................................................................55 Windows Vista® ­ Welcome Center......................................................................56 Windows Vista® ­ User Account Control ..............................................................57 Installation of Software ..........................................................................................58 How to Install your Software...............................................................................58 Software Uninstallation.......................................................................................59 Windows Activation ...............................................................................................60 Product Activation on your PC ............................................................................60 BIOS Setup.............................................................................................................61 Execution of the BIOS Setup ...............................................................................61 BullGuard Internet Security ....................................................................................62 Customer Service & Self Help ..................................................................... 65 Data and System Security ..........................................................................................67 Data Security..........................................................................................................67 Maintenance Programs ..........................................................................................67 System Restore ..........................................................................................................68 Correction..............................................................................................................68 Windows® Update...................................................................................................69 Windows Update Information for Data Security ..................................................70 System Restore powered by Symantec ...................................................................71 Limits of the Recovery .........................................................................................71 Carrying out a Restore ........................................................................................71 FAQ ­ Frequently Asked Questions............................................................................72 Customer Service ......................................................................................................73 Troubleshooting ....................................................................................................73 Localise the Cause..................................................................................................73 Errors and Possible Causes .....................................................................................74 Additional Support.................................................................................................75 Driver Support .......................................................................................................75 Transporting the PC ...............................................................................................76 Cleaning and Care .................................................................................................76 Recycling and Disposal...........................................................................................76 Battery Treatment ..................................................................................................77 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Upgrades and Repairs ............................................................................................78 Notes for Service Engineers.................................................................................78 Appendix .................................................................................................... 81 Standards ..................................................................................................................83 Electromagnetic Compatibility ...............................................................................83 Electrical Safety ......................................................................................................83 Ergonomics ............................................................................................................83 Noise Emission .......................................................................................................84 Information about the Regulatory Compliance according to R&TTE......................84 FCC Compliance Statement ...................................................................................85 Making Copies of this Manual ................................................................................85 Index .........................................................................................................................86 - vi UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Safety Subject Operational Safety Data Security Page ..........................................................3 ...................................................................4 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Chapter 1 Safety -2UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Operational Safety Please read this chapter carefully and observe all listed notes. This ensures a reliable operation and long life expectancy of your PC. · · · · Do not allow children to play unattended with electrical equipment. Children are incapable of judging potential risks properly. Keep the packing materials, such as plastic sheeting away from children. The danger of suffocation could arise in the case of misuse. Do not open the PC casing or use the PC with the casing removed. When the casing is open there is a danger to life from electric shock. Optical drives are Laser Class 1 devices. These lasers must remain in their sealed PC casing. Do not remove the drive covers, as exposure to the lasers may prove harmful. Do not insert objects through the slots and openings of the PC. This may lead to electric shock, electrical short-circuit or fire that will damage your PC. Do not cover the slots and openings in the PC casing. These openings are for ventilation purposes. Covering these vents may lead to overheating. Please keep free a minimum distance of 20 cm on all sides when setting up the PC. Do not subject the device to dripping water or spray or place any containers, such as vases, on the device. The penetration of fluid can impair the electrical safety. · · · Switch off your PC immediately or do not switch it on at all and contact customer service ... · · ... if the housing of the PC is damaged or fluids have leaked into it. Have the PC checked by customer service first, because the PC may not be safely operated otherwise and there may be a life-threatening risk of electrocution! -3UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix ... if the power cord or the connectors attached to it are burnt or damaged. Replace the defective power cord with an original power cord. Under no circumstances may a defective power cord be repaired. Help Operation Connecting Safety Data Security Attention! Every time you update your data make back-up copies on an external storage medium. The supplier does not assume liability for data loss or damage to data storage units, and no claims can be accepted for damages resulting from the loss of data or consequential losses. -4UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Setting Up & Getting Started Subject Page Included with your PC ......................................................7 Setting Up ........................................................................8 Connecting .....................................................................11 Getting Started ..............................................................25 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Chapter 2 Safety -6UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Included with your PC Please check that the contents listed below are supplied with your package and notify us within 14 days of purchase if this is not the case. You MUST provide your PC's serial number when contacting a customer service representative. Your PC bundle should include the following components: · · PC and power cord Wireless keyboard and mouse set containing: · · · · · · Wireless keyboard + 2 batteries type Micro LR03/AAA, 1,5V Wireless mouse + 2 batteries type Mignon LR6/AA, 1,5V USB receiver OEM Version of Operating System Application-/ Support Disc Documentation -7UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety Setting Up Remember that choosing the proper location for your PC is just as important as connecting it correctly. Set-up Location · Keep your PC and all units connected to it away from moisture, dust, heat and direct sunlight. Failure to observe these instructions can lead to malfunctions or damage to the PC. To prevent damage to your PC from a fall, place and operate the PC and all connected units on a stable, balanced and vibration-free surface. · Ambient Temperature · The PC can be operated at an ambient temperature of between 10° and 35°C (+41° and +95°F) and at a relative humidity of between 30% and 70% (without condensation). When powered off, the PC can be stored at temperatures between -20° and 50°C (­40° and +158°F). Unplug the cable during thunderstorms and make especially sure to remove the antenna cables, if present. We recommend the use of a surge protector for additional safety, in order to protect your PC from being damaged by power peaks or lightning strikes through the power network. Delay operating a PC after transport until the device has adjusted to the ambient temperature. In situations of large temperature or humidity differences condensation may build up moisture inside the PC, which might cause an electrical short circuit. · · · -8UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Ergonomics Note Ensure that the monitor is set up in such a way that reflections, glare and light/darkness contrast are avoided. Always position the monitor in a line of sight that runs parallel to the window front (see picture). You should also apply a parallel line of sight with respect to artificial lighting. This means that in a room lit by artificial light essentially the same criteria and objectives apply. Should it not be possible to arrange the monitor as outlined above, the following measures might be helpful: · · · Turn, lower or incline the monitor. Place horizontal or vertical shades at the windows. Work in Comfort Note Take regular breaks from the work at your screen to prevent tenseness and exhaustion. Sitting in one position for long periods can be uncomfortable. To minimize the potential for physical discomfort or injury, it's important that you maintain proper posture. -9UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help You should not position the monitor in close proximity to a window as this is usually the brightest area of the room and may cause visual impairments during daylight hours. Operation Connecting Safety Overall: Change your position frequently and take regular breaks to avoid fatigue. Back: While sitting at your work surface, make sure your back is supported by the chair's backrest. This should be in an erect position or angled slightly backwards. Legs: Your thighs should be horizontal or angled slightly downward. Your lower legs should be near a right angle to your thighs. Your feet should rest flat on the floor. If necessary, use a footrest, but double check that you have your seat height adjusted correctly before getting a footrest. Arms: Your arms should be relaxed and loose, elbows close to your sides, with forearms and hands approximately parallel to the floor. Wrists: Your wrists should be as straight as possible while using the keyboard, mouse or trackball. They should not be bent sideways, or more than 10 degrees up or down. Head: Your head should be upright or tilted slightly forward. Avoid working with your head or neck twisted. · · · · · Hand rest: 2" ­ 4" Viewing distance: 20" ­ 27.5" Legroom (vertical): minimum 25.5" Legroom (horizontal): minimum 23.6" Top line of screen at eye level or slightly below. - 10 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Connecting For a better guidance, open up the left inner page of the cover with the diagrams to find the location of the described connections. Note: The devices listed are not necessarily included with your PC. All the connections listed are optional and will not inevitably be available on your PC. Cabling Please follow the instructions below in order to correctly connect your PC: · · · Arrange cables in such a way that no one can tread on or trip over them. Do not place objects on the cables. To avoid damage to your PC, connect your peripherals (e.g., keyboard, mouse and monitor) whilst your PC is powered off. Some devices can be connected whilst your PC is in use. These devices usually have a USB connector. Please follow the appropriate instructions for each device. Keep the PC at least one meter (approximately three feet) away from high frequency and magnetic interference sources (e.g., televisions, loudspeaker cabinets, mobile telephones, etc.) in order to avoid malfunctions and/or loss of data. Please note that only shielded cables shorter than 3 meters (9.84 ft) should be used for the external interfaces. Please only use double screened cables for printer cables. Do not replace the cables supplied with the machine by any others. Use the cables belonging to the scope of the delivery exclusively, because they will have been tested extensively in our laboratories. Also only use the connection cable supplied with the devices for the connection of your peripheral devices. Make sure that all connection cables have been connected to the peripheral devices associated with them, in order to avoid disruptive radiation. Remove unneeded cables. The connection of devices is limited to equipment that complies with EN60950 "Safety of information technology equipment" or EN60065 "Audio, video and similar electronic apparatus. Safety requirements". · · · · · · - 11 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety · In the first hours of operation, new devices may emit a typical, unavoidable but completely harmless smell, which will decline increasingly in the course of time. We recommend that you ventilate the room regularly, in order to counteract the formation of the smell. During the development of this product, we have made sure that the applicable limits are clearly decreased. Note You only need to connect those components to your computer that you require. If you do not have the described device available (e. g. printer) you may carry out the connection later. Front Connectors Diagram reference: D Some connections are located behind the front flap. This offers you the great advantage of creating frequently used connections quickly and conveniently, without turning the PC round. The flap, which can be slid, also protects the connections. Optical drive Press on the front screen, so that it folds open. The right image shows the opened screen. Optical drive Front flap Lift the panel to return it to its original position. (similar picture) - 12 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Connecting Speakers/Audio Output Diagram reference: E Here you can connect your active speakers for replaying or audio connection cables for recording. Please refer to the user's guide of your stereo installation for information about which connector you should use (usually Line In or Aux). 1. Connect the cable with the 3.5 mm stereo jack plug into the green socket ((( ))) on the rear of your PC. PCs with Surround Sound Connect your surround equipment as follows: 1. Connect the Front speaker to the green socket marked with ((( ))) . 2. Attach the rear loudspeakers to the connector RS OUT. 3. Your centre speaker or subwoofer can be connected to the socket CS OUT. 4. Connect to the optional SS OUT socket two more speakers for the back surround. A digital audio output (SPDIF) can be connected to an optical and/or a coaxial cable. Diagram reference: F1, F2 1. Plug an optical cable to the socket at position F1 or a Cinch cable to the socket at position F2. Connecting a Sound Source/Audio Input Diagram reference: G1, G2 This port is used to accommodate a connecting cable for external analogue audio sources (i.e. stereo system, keyboard/synthesizer). 1. Connect the cable with the 3.5 mm stereo jack plug to the light-blue coloured socket marked with ((( ))) . Optionally, you can connect a stereo Cinch cable (position G2). - 13 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix 2. Connect the other end of the cable to an audio device with a corresponding digital input. Help Operation Diagram reference: E Connecting Safety LAN Connection Diagram reference: H Your PC is equipped with a network connection, in order to prepare it for network operation. The network cable usually has two RJ45 plugs so that it is unimportant which plug is connected to which jack. 1. Connect the one plug of the cable to the PC jack. 2. Connect the other plug to the other PC or hub/switch. For further information refer to chapter "The Network" starting at page 47. Connecting IEEE 1394 (Fire Wire) Devices Diagram reference: I Warning! Connect your IEEE 1394 devices after initial set-up of your new PC. This will prevent unnecessary confusion during installation. These devices can generally be connected during operation. Read the manual for your peripheral device first. · The voltage outputs of your PC for IEEE 1394 are protected by a fuse (limited power source according to EN60950). This ensures that a malfunction of the PC will not damage the peripheral devices connected to the respective jacks. Note Peripheral devices can have different connecting cables (6-pole, 4-pole). Please check what kind of cable you need for your peripheral device. Note Take care to ensure that the connector and the socket fit exactly to avoid damaging the contacts. Because of its asymmetric form the plug only fits into the socket in one position. - 14 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 1. Connect the IEEE 1394 cable to the IEEE 1394 port of your PC. Important The connectors on the front side are not configured for parallel use. Connecting USB Devices Diagram reference: J Warning! Connect your USB devices after initial set-up of your new PC. This will prevent unnecessary confusion during installation. These devices can generally be connected during operation. Read the manual for your peripheral device first. · The voltage outputs of your PC for USB are protected by a fuse (limited power source according to EN60950). This ensures that a malfunction of the PC will not damage the peripheral devices connected to the respective jacks. Note Take care that the connector and the socket fit exactly to avoid damaging the contacts. Because of its asymmetric form the plug only fits into the socket in one position. 1. If you wish to use a printer, scanner or other device with a USB port, connect the cable to the USB socket on your PC. Note Connect your devices always to the same port otherwise your operating system will give a new ID and asks for driver installation. - 15 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help You have a choice of several connection sockets. It does not matter which you use. Operation Connecting Safety Installing wireless keyboard & mouse The wireless keyboard and mouse operate with digital radio technology to ensure no cross communication between the keyboard, the mouse and your computer without connecting cables. The transmission and receiving of keyboard and mouse signals are free from angle restriction. Before working with your new keyboard and mouse, ensure you take the following steps. Beware! Please read and follow the security advices concerning the use of batteries on page 77. Inserting batteries in keyboard The keyboard requires two alkaline batteries (LR03/AAA, 1,5V). 1. Remove the battery compartment cover on the bottom of the keyboard by pushing it in the direction of the arrow. 2. Insert two LR03/AAA batteries. The illustration on the cover shows how to insert the batteries properly. 3. Recover the battery compartment. Inserting batteries in mouse The mouse requires two alkaline batteries (LR6/AA, 1,5V). 1. Push the lock of the battery compartment on the under-side of the mouse in the direction of the arrow. 2. Lift the battery compartment cover gently, while holding the lock of the battery compartment in the direction of the arrow. 3. Release the lock of the battery compartment and remove the battery compartment cover carefully. Pay attention that you do not break off or damage either of the resistance hooks on the battery compartment cover. 4. Insert two AA batteries. Ensure that the polarity corresponds to the illustration (+ must correspond with + and ­ with ­). 5. Replace the battery compartment cover. Note If the battery status indicator on the mouse lights up, exchange the batteries and possibly conduct a frequency control. - 16 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Connecting the receiver Diagram reference: J · · Attach the receiving station for the mouse and keyboard to the USB port on your PC. Set up the receiver with a minimum distance of 20 cm from other electrical appliances (e.g. monitor) in order to obtain optimal results. The distance between the receiving station and transmitters (keyboard and mouse) should not exceed 1.50 m. Do not place the receiver on metal surfaces. Note - 17 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Change the batteries if it is no longer possible to make entries smoothly. The operation of the mouse and the keyboard is described on page 31. Connecting Safety Setting the frequency (ill.: Setting the frequency mouse) (ill.: Setting the frequency keyboard) (ill.: Setting the frequency receiver) 1. Press the automatic frequency control on the receiver. 2. Within 15 seconds, press the automatic frequency control key at the bottom of the mouse with a pointed object (ball-point pen or the like). 3. Move the mouse. If the LED on the receiver lights up and the mouse pointer (if available) moves, the control has taken place. If this is not the case, repeat Steps 1-3. 4. Press the automatic frequency control on the receiver. 5. Within 15 seconds, press the automatic frequency control key on the keyboard. 6. Press the space bar on the keyboard. If an LED on the receiver lights up, the control has taken place. If not, repeat steps 4-6. 7. The devices are now coordinated with one another. If several equipment sets are operated at the same time and, because of this, there is mutual interference, repeat Steps 1-6 until the interference is remedied. - 18 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Connecting Serial Devices Diagram reference: K You can connect an external modem or another serial device using this port. Note Take care that the connector and the socket fit exactly to avoid damaging the contacts. Because of its asymmetric form the plug only fits into the socket in one position. 1. In order to connect an external modem, card reader or other serial device, connect the serial cable with the turquoise-coloured connection socket (K) on the rear of your PC. 2. Hand-tighten the screws of the serial cable. Connecting PS/2 Devices Diagram reference: L 1. Connect the mouse cable to the right, green PS/2 port. 2. Connect the keyboard to the left, blue PS/2 port. TV-out Diagram reference: N, M1, M2, M3 You can attach a television set to the video exit (TV-out) and transfer it to your computer display. You will be able to use a SCART cable (M1), a composite cable (Cinch, M2), an Svideo cable (M2) or a component cable (M3). Alternatively, if your television set has an appropriate port, you can use the digital HDMI connection (High Definition Multimedia Interface) (N) for the transmission of picture and sound signals. Note The video outputs can only be used for replaying. 1. Connect your PC and your television with the cord required for your TV. - 19 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help You can omit this step if you want to connect a USB mouse or a USB keyboard. Operation Connecting Safety Connecting the Monitor Diagram reference: N Your PC is equipped with a VGA, DVI and a HDMI connector. Note Always only connect one data cable, in order to avoid problems with the signal allocation, if your monitor has several inputs (e.g. VGA and DVI). Note Take care that the connector and the socket fit exactly to avoid damaging the contacts. Because of its asymmetric form the plug only fits into the socket in one position. 1. Connect the data cable of the monitor to the socket on the graphics card (reference N). If necessary, remove the white guard-ring on the monitor plug and ensure that the plug and socket mate together precisely. 2. Hand-tighten the screws on the monitor cable. Caution! Your PC monitor is preconfigured for a screen resolution of 1024 x 768 pixels and an optimal refresh rate of 60 hz. If your monitor does not support these settings it may become damaged or malfunction during use. You can change the screen resolution and configuration of your monitor as follows (See also your monitor's User Manual). You can change the screen resolution in the Control Panel under Personalize appearance and sounds. The Program can be started in the following way: · Right mouse click on the Windows interface (Desktop) and a left mouse click on Personalization. or · Through Start Control Panel Personalize appearance and sounds, by double clicking with the left mouse button. - 20 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Antenna Connection for TV DVB-S TV reception Diagram reference: O1 You can watch television with your digital satellite equipment by means of the DVB-S connection (O1). 1. Connect your satellite equipment to the TV socket of your TV card (O1). Analogue TV reception Diagram reference: O2 1. Connect a terrestrial aerial or cable television to the TV socket (O2) of your TV card. DVB-T TV reception Diagram reference: O2 You will have the possibility of using these services by means of a corresponding aerial (not included in the scope of delivery), if DVB-T or digital services are offered at your location. 1. Connect a DVB-T aerial to the TV socket (O2) of your TV card. - 21 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety Connecting headphones Diagram reference: R Here you connect headphones/earphones. 1. Connect the cable with the 3.5 mm stereo jack plug in the green socket at the front of your PC (diagram reference R). Caution! The use of headphones/earphones with a high volume can lead to lasting damage to your hearing. Set the volume to the lowest level before reproducing any sound. Start the sound reproduction and increase the volume to the level that is comfortable for you. Changing the basic settings of the equalizer can also cause damage to the hearing of the listener. It can cause damage to the hearing ability of the listener if a device is operated through earphones with an increased volume for a long period. Connecting a Microphone Diagram reference: S 1. You can use the pink socket S to connect a microphone with a 3.5 mm mono jack plug. 2. Position the microphone in such a way that it does not point directly at the speakers. If you hear feedback, characterised by loud whistling noises, reposition the microphone until the sound stops. Connecting a Recording Source / Video Inlet Diagram reference: G2, T You can connect an external video source to your PC using an S-Video or composite (cinch) cable. These connections enable you to record and, if necessary, edit video data. 1. Connect a composite (cinch) or an S-Video cable to the socket T. 2. Use the audio input on the front side of your PC (socket G2) to feed in the audio signal. - 22 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Connecting S-ATA devices Diagram reference: U eSATA stands for "external Serial ATA" and is used for connecting external hard disks. Unlike common USB standards, the transmission speed of an e-SATA connection is higher than that of external USB hard disks. Note Take care that the connector and the socket fit exactly to avoid damaging the contacts. Because of its asymmetric form the plug only fits into the socket in one position. 1. Connect the cable to the eSata socket in the front of your PC. Remove S-ATA devices 1. Before removing an S-ATA hard disk from your PC, click on the icon "Safely remove hardware" in the task bar and then on the hard disk to be removed. - 23 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety Connecting the Power Supply Diagram reference: P Finally, connect the power supply to your PC and monitor. 1. Plug the main connection cable into the plug socket and connect it with the main cable connection (P) of your PC. Observe the following safety precautions: Please note Even with the power switch switched off some parts of the device receive current. You must unplug the power plug from the socket, if you want to interrupt the power supply to your PC or cut off your device from current entirely. · · · · The power socket must be in the vicinity of the PC and within reach of the power cables. Do not stretch the power cables tightly to reach a power socket. Only operate the PC on grounded plugs of the domestic power net. Use only the supplied power cord. To provide additional protection against electric shock, power surges, lightning strikes, or other electrical damage to your PC, we recommend the use of a surge protector. If you are using an extension cord, ensure that the cord meets your local safety requirements. If in doubt, ask an electrician. The power supply unit has an On/Off switch that can be used to power off the PC. When the switch is Off (0) no power is being consumed. Do not start your PC yet! First, read the following section to find out what you need to know in order to get started. · · - 24 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Getting Started The software on this PC comes fully pre-installed. You do not have to load any of the CD's/DVD's supplied. With many programs (e.g., telephone-CD's or encyclopaedias), however, it is necessary to insert the corresponding CD/DVD in order to call up the data which is stored on it. The software will ask you to do this as necessary. Once you have made all the connections and secured the necessary connectors you can turn on the monitor, the other peripherals and finally the PC itself. Step 1: Power On 1. Power on the monitor and your peripherals. Switch Diagram reference: P 2. Provide power to your PC by pressing the switch to position [I].(You will stop the flow of current to the PC by pressing the switch to position [0]) On/off Switch Diagram reference: A 3. Press the On/off switch briefly to start loading the operating system. You can program the function of the main switch in the power management of Windows® (please refer to on-line help). The PC will always be switched off, if the main switch is pressed for more than 4 seconds. Warning! If the operating system is not shut down properly (through Down), then there is a risk of data loss. Shut - 25 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety Step 2: Starting Initial Setup The PC starts and now goes through a number of phases: Note Ensure that there is no bootable CD (e.g. the Recovery-CD) in the CD-ROM drive. Such disks will prevent the operating system from loading directly off the hard drive. The operating system is loaded from the hard disk. During the initial set-up, the loading process takes slightly longer than normal to register the operating system and the individual components completely. Your operating system is finished loading when a welcome screen is shown on your display. Follow the instructions on the screen. Dialogue boxes will explain any steps that need to be taken. The greeting procedure will guide you through the following screens and dialogues. Should you have any questions just click on License agreement Please read through the license agreement carefully. It contains important legal information on the use of your software. In order to see the full text, use the mouse and the scroll bar to move downwards until you have reached the end of the document. You accept the agreement by clicking on the I accept the agreement option field. Only by doing so will you be entitled to use the product under lawful terms and conditions. . - 26 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Step 3: Finalising After the login procedure the Windows® desktop appears on your screen. This can be adjusted so that the screen of your computer looks different. The basic operation, however, is ensured. Short Description of the Windows® Desktop 1. Start Button Clicking the Start button brings up a menu where you can access help, software programs, files, and settings. 2. All Programs All of the software programs installed on your PC are ordinarily listed here. Click All Programs to reveal an extensive menu. 3. Program Bar The most commonly used software programs are listed here. - 27 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety 4. Turn Off Computer Click on this interface with the left mouse button and select the Shut Down option, in order to switch the PC off. 5. Task Bar Here you receive information and status reports about Windows Vista® and which programs are running. 6. Desktop Icons Desktop icons link to their respective programs. To start a program, double-click its desktop icon. 7. Logged in User This tells you which user is logged in to your PC. 8. Control Panel You can use the icons in Control Panel to change the appearance and functionality of Windows Vista®. These icons represent options for configuring your PC. 9. Windows Vista® Help Here you can find information on using your PC, networking, backup, and many other tasks. - 28 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Operation Subject Page The Mouse........................................................................31 The Keyboard ...................................................................32 The Hard Drive..................................................................33 The Optical Drive..............................................................37 The Card Reader ...............................................................40 The Graphics Card ............................................................41 IEEE 1394 (Fire Wire) ........................................................45 The USB Port.....................................................................46 Network ..........................................................................47 The TV Tuner Card............................................................50 Serial COM Port ...............................................................54 Software .........................................................................55 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix The Remote Control .........................................................50 Help The Sound Card................................................................44 Operation Connecting Chapter 3 Safety - 30 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 The Mouse The mouse has beside the two keys a wheel that can be used to scroll through a document or internet pages. Note The scroll wheel can be used as a button. The functionality depends on the application. In Word for example you can push the wheel to move up and down as a scroll function. If the mouse course moves jerkily on the screen, try a different surface (mouse pad). Glass and metallic surfaces might cause problems. Battery save function Appendix If you do not use your optical wireless mouse for a few minutes, the battery save function turns on. In this case you cannot move the cursor on your screen. In order to reactivate the mouse, click any key on your mouse. - 31 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Help Operation Connecting Safety The Keyboard This section contains useful information on using the keyboard. All diagrams are schematic. On the base of the keyboard are two folding feet that let you adjust the angle of the keyboard. Pull them forward to adjust the angle of the inclination. Adjustable Feet The Alt and Ctrl Keys The left Alt key performs certain functions in conjunction with other keys. The application program determines these functions. In order to enter a combination of keys that include the Alt key, hold the Alt key down while pressing the other key. The right Alt key operates in a similar way but selects certain special characters. The Ctrl key, like the Alt key, carries out program functions. Useful key combinations (software-dependent): Key Combination Alt + F4 Alt + Print screen Shift + ' Ctrl + Alt + Del Function and Description As a rule ends the program selected or closes the window opened. Copies the image of the window currently active to the clipboard. Generates the @ character required for e-mails (pronounced: at). Windows security is launched. (Country-specific variances are possible.) - 32 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Multimedia functions Some keyboards are provided with multimedia keys. These keys have the following functions: Symbol Function Standby Mode Stores the operating session and puts the PC into an energy-saving mode, so that the operating session can be recreated quickly. You will be able to leaf forwards as soon as you have pressed the Return button at least once. Displays a website previously visited. Stops the search for the website entered. Updates the website entered. Calls up the Home page established by you in the Internet oprtions. Opens the search function. Use this key to start the standard e-mail program. Opens the folder ,,Favourites". Opens the File Explorer on your computer. Opens the calculator function. Increases the volume. Use this key to end playback of the current track/title. Use this key to skip backwards to the previous track/title. Starts the audio and/or video playback. If you press this key for a second time, you activate the pause function. Use this key to start the Media Center. Use this key to skip forward to the next track/title. Use this key to mute (on/off) the sound output. Lowers the volume. Forward Back Stop Update Home page Search E-Mail Favourites Computer Calculator Louder Quieter Stop Previous Track Play / Pause MCE Next Track Mute - 33 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety The Hard Drive The hard drive is the main storage medium combining large storage capacity and rapid data access. The hard drive contains the operating system of the computer, other application programs and backup files. These programs and files are pre-installed on your PC, so you may note that some of the space on your hard drive is already taken. The Windows operating system cannot use the full capacity of the hard drive, which means that there will be a difference between the capacity that the BIOS displays and what the operating system displays. The operating system of the PC, further application programs and backup files are located on the hard drive and reduce its total capacity. The hard drive is addressed as drive C and D. Note Never switch off the computer while the busy indicator is lit since this may result in loss of data. Usually your hard disk is divided into more partitions, but there can also be some minor variations. In your first partition (Boot) you will find your operating system, application programs and the users' documents and settings. The second partition (Recover) serves for data security and contains additional drivers and tools. The backup files are also found here (D:\Recover). They allow you to reset your computer to its original factory-set configuration. (Please see page 70.) - 34 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Important Directories In the following we have listed the most important directories and described their content. Attention! Do not delete or modify these directories or their contents since data could be lost or the functionality of the system could be at risk. C:\ The master directory of drive C: includes important files required to start Windows. In the factory setting these files are hidden for safety reasons. C:\Windows The main directory of Windows. This is where the files of the operating system are saved. D:\Driver This folder includes the drivers required by your computer (pre-installed). D:\Recover Here the backup files are located enabling you to recover the factory setting (see page 71). - 35 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help D:\Tools Here you find additional programs and other documentation for your PC. Operation C:\Programs As the name suggests, in this directory programs install the files belonging to the application. Connecting Safety Connecting an external hard drive Your PC has a hard disk bay, which will enable you to connect the external MEDION HDDrive 2go ultra speed hard drive simply and without complications via the SATA connection. As in the case of a USB memory pen, connection takes place with a restarted operating system. The hard drive will be recognized as a replacement storage medium and will be allocated a drive letter automatically. Note Please take note of the fact that only the MEDION Hard Drive specified above can be connected to the hard disk bay. The HHDrive 2go (connection via USB) of the first generation can only be connected with a special adapter. As soon as you attach the hard disk to the hard disk bay, this is recognized as the removable data carrier of your PC. If you don't access your MEDION HDDrive 2go ultra speed for a long period of time (approximately 10 minutes), it goes into the energy savings mode, in order to not bring about the unnecessary consumption of electricity. Important! The plugs are provided with dust protection caps to protect the connections. They must be removed before use. The caps must be replaced under all circumstances, if the connections are not used. - 36 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 The Optical Drive Diagram reference: C1, C2 Loading a Disc: Attention! Do not place protective foils or other stickers on your CD's. To avoid damage to your drive, do not use deformed or damaged CD's. Attention: Do not use scratched or dirty discs, discs with pieces broken off or discs of poor quality. Because of the high speeds in the drive the discs might break and damage your data as well as your drive. Examine the discs before you enter them. If damage or dirt is visible, you should not use them. Damage caused by faulty media is excluded from warranty and any repair will be charged. 1. Pull the eject button (Diagram reference, C2) on the right of the optical drive to open the tray. 2. Place the disc on the tray so that it lays flat with the label facing upward. 3. Pull the eject button again to close the tray. Note Many CD's start automatically when they are inserted. This depends on the operating system and the corresponding settings. Playing Back and Retrieving Data from Discs Your PC is able to playback and to retrieve Audio CDs, DVD Movies and Data discs. After loading the disc your operating system will open a selection window with different options for playback. If your operating system doesn't open the selection window you still have the possibility of access via the Explorer or Computer. - 37 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety How to Remove a Disc 1. Pull the eject button (Diagram reference, C2) at the front of the CD-ROM drive to open the drawer. 2. Remove the disc and store it in the CD cover in a safe place. Note Do not try to remove the CD from the drive while the computer is accessing the disk. The Optical Drive as Boot Drive The optical drives can be used for booting the operating system. If the PC does not boot, it is possible that autostart is turned off in the BIOS or the CD is not bootable. Regional Playback Information for DVD The playback of DVD movies includes the decoding of MPEG2 videos, digital AC3 audio data and the deciphering of CSS protected contents. CSS (sometimes called copy guard) is the name of a data protection program incorporated by the movie industry as an action against illegal copies. Among the numerous regulations for CSS licensees the most important ones are the country specific playback restrictions. In order to facilitate the geographically restricted release of movies, DVD titles are released for certain regions. Copyright laws require the restriction of each DVD movie to a certain region (usually the region, in which it is sold). DVD movie versions can be published in several regions but the CSS regulations require that each CSS decipherable system may only be used in one region. Attention! The decoding software included with your PC may be changed for regional DVD decoding up to five times, after which the drive will only play DVD movies for the region setting last entered. Changing the region code after that will require factory resetting which is not covered by warranty. If resetting is desired, shipping and resetting costs will be billed to the user. - 38 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Subjects Concerning the CD/DVD-Rewriter Normal Discs are pressed from a digital, glass master and then sealed. In the case of blank disc, the information is burnt onto the disc with the laser of the Rewriter. Therefore these discs are more sensitive than normal CDs. Please avoid the following when using recordable/rewriteable discs - especially blanks that have never before been used: · · · radiation by direct sunlight (UVA/UVB) scratches and damage to the disk surface extreme temperatures - 39 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety The Card Reader Diagram reference: Q If your PC is equipped with a card reader, you can handle different memory card types. The following table refers to the use of the card reader: Slot MS SD MC CF SM/XD Card type Memory Stick Memory Stick Pro SD (Secure Digital) MMC (MultiMediaCard) CF (Compact Flash) ® IBM Microdrive SmartMedia XD Contacts pointing downwards point to front point to bottom pointing upwards If a card is inserted, a free drive will be assigned* by Windows . ® * Only if this concerns a removable disk. - 40 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 The Graphics Card Diagram reference: N Your computer is fitted with a high performance graphics card, one of the most technologically advanced. The graphic card can, depending on the set resolution, display vertical image playback frequencies of between 60 Hz and 240 Hz. You can change the graphics setting using the Personalization help program in the Control Panel. The graphics driver will ensure that it will not be possible to set any resolution unsuitable for the graphics system at the same time. Recommended vertical scanning rates for tubed devices (CRT) are 75 -85 Hz and 60-75 Hz for LCD monitors. Read the Operating Instructions of your monitor as well. Personalize appearance and sounds This program offers you the possibility of adjusting the presentation on your display. This includes the background image, the screensaver, Active Desktop (web) and additional settings of your display and your graphics card, for example. The program can be started in the following way: · Right mouse click on the Windows interface (Desktop) and left mouse click on Personalization. or · Via Start Control Panel Personalize appearance and sounds with a double-click with the left mouse button. - 41 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety Connecting the PC to a Television Diagram reference: N, M1, M2, M3 The Video outputs (TV-out) are located on the back of your PC. They offer comprehensive possibilities for transferring images on the PC to a television. YU(Pb)V(Pr) (Component) Composite (Cinch) S-Video SCART Note You will need an S-video cable for connecting your device to the PC according to the equipment. This is not included in the scope of the delivery, but it can be obtained through a specialist shop. Read precisely which cable you need in the Operating Instruction of your TV device. - 42 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 How to Connect the PC to a Television: Note To use the TV function you must first connect the TV to the graphics card before starting up the PC! 1. Shut down Windows and power off the PC. 2. Connect the composite, SCART, S-video or component input on your device to the corresponding output (diagram reference: M1, M2, M3) on your PC. Alternatively, if your television set has an appropriate port, you can use the digital HDMI connection (High Definiton Multimedia Interface) (N) for the transmission of picture and sound signals. 3. Switch on the television to see the PC image on your TV set. 4. Start up the PC and wait for Windows to fully load. 5. In the Personalization program set up the configuration. 6. End configuration by clicking on OK. Note The video outputs at the back of your PC are only planned for playback. For video recording please use the Video Input (composite or S-Video) connectors at the front of your PC. - 43 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508 Appendix Help Operation Connecting Safety The Sound Card Diagram reference E, F1, F2, G1, G2, R, S Note The speaker outputs E, F1 and F2 are designed for active speaker systems or headphones. Passive speakers cannot be used or if they are the quality will be significantly reduced. By using the external connections you have the possibility to connect your PC with a surround system. If you wish to alter the base volume, click on the loudspeaker symbol in the task bar. Click on Mixer, in order to open the volume mixer. Note Only connect the headphones/earphones to the front connector of your PC (diagram reference: R). Caution! The use of headphones/earphones with a high volume can lead to lasting damage to your hearing. Set the volume to the lowest level before reproducing any sound. Start the sound reproduction and increase the volume to the level that is comfortable for you. Changing the basic settings of the equalizer can also cause damage to the hearing of the listener. It can cause damage to the hearing ability of the listener if a device is operated through earphones with an increased volume for a long period. - 44 UK/ N. IRELAND HELPLINE 0871 3761020 REP. IRELAND HELPLINE 1-800-992508