xbox dvd movie Playback kit Module DVD vidéo Xbox Kit de reproducción de películas DVD Xbox DISPLAY REVERSE PLAY FORWARD SKIP- STOP PAUSE SKIP+ TITLE INFO SELECT MENU BACK 1 4 7 2 5 8 0 3 6 9 K01-00004 Xbox DVD Movie Playback Kit 2 Instruction Manual Instruction Manual 3 Xbox DVD Movie Playback Kit The Xbox DVD Movie Playback Kit lets you play DVDs on your Xbox console. The DVD Movie Playback Kit consists of three items: · Infrared receiver · Remote control · Instruction Manual The DVD Movie Playback Kit is for use exclusively with the XboxTM video game system from Microsoft. IMPORTANT! Before using this product, read the Xbox Video Game System Instruction Manual for important safety information and health warnings. Please retain both the Xbox Video Game System Instruction Manual and this manual for future reference and warranty information. The limited warranty covering this Xbox DVD Movie Playback Kit is contained in the Xbox Video Game System Instruction Manual. Setting up the DVD Movie Playback Kit To place batteries in the remote control 1. Remove the battery compartment cover. 2. Place two AAA batteries (sold separately) into the remote control. 3. Replace the batterycompartment cover. Notes about batteries: Keep batteries out of reach of children. Do not mix old and new batteries, or batteries of different types. Follow manufacturer's instructions on battery use. Remove old, weak, or worn-out batteries promptly Always recycle or dispose of used batteries in accordance with your local ordinances. If a battery leaks, remove all batteries and thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer's recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. 1. If the Xbox console is on, press the power button on the Xbox console to turn it off. 2. Connect the infrared receiver to any controller port on the front of the Xbox console. To connect the infrared receiver 4 Xbox DVD Movie Playback Kit Instruction Manual Playing DVD Movies To play DVDs 1. With the infrared receiver connected to the Xbox console, press the power button on the Xbox console to turn it on. 2. Press the eject button to open the disc tray. 3. Place the DVD on the disc tray with the label facing up. 4. Press the eject button to close the disc tray. The DVD will begin playing. Selecting DVDs The DVD Movie Playback Kit can play only region 1 DVDs that have this logo: Avoiding Damage to DVDs or to the Disc Drive Do not leave a disc in the Xbox console for extended periods when not in use. Do not move the Xbox console while the power is on and a disc is inserted. Do not apply labels, stickers, or other foreign objects to discs. Using the REMOTE control and OnScreen Display Use the DVD Movie Playback Kit remote control to operate DVD movie playback. Most basic features are available on the remote. Button Display Play Operation Display onscreen controls. Play video from current location. Fast reverse play back. If DVD is paused, slow reverse playback. Cycles through playback speeds. Fast forward. If DVD is paused, slow forward. Cycles through playback speeds. 1 4 7 DISPLAY REVERSE PLAY FORWARD SKIP- STOP PAUSE SKIP+ TITLE INFO SELECT MENU BACK Reverse 2 5 8 0 3 6 9 Forward Instruction Manual 5 Xbox DVD Movie Playback Kit Skip - Go to beginning of current chapter. If this button is pressed within first two seconds of a chapter, go to beginning of previous chapter. If DVD is paused, go to previous frame. Stop playback. Pause playback. Go to next chapter. If DVD is paused, go to next frame. Go to title menu. Display title, chapter, and elapsed time on the screen. Accept current selection. If a specific chapter number is entered, go to that chapter. Move selection up, down, left, or right. Go to main menu. Go to previous menu. If at main menu, resume playback. Enter specific chapter number, then press Select. Additional features are available in the onscreen display. Icon Operation Cycle through available subtitle languages. Cycle through available viewing angles. Cycle through available audio tracks, including multilingual tracks. Select video, audio, and language options from setup menu. Looping Playback. First press selects A point. Second press selects B point and begins looping playback between A and B. Third press turns off looping playback. Magnify picture. Toggles between zoom settings. When zoomed, use arrows to move around picture. Stop Pause Skip + Title Info Select Arrows A-B Menu Back Numbers 6 Xbox DVD Movie Playback Kit Instruction Manual Parental Control You can limit the type of DVD content played on the Xbox video game system based on the MPAA (Motion Picture Association of America) rating level. To determine the rating level of your DVD movie, see your DVD movie documentation. By default, the Xbox video game system is set to play all content. To change the level of content that can be played 1. Turn on the Xbox console with no disc in the disc tray. 2. Select Settings, and then select Parental Control. 3. Select Movies, and then select the level you want. The Xbox game system will play DVDs that are rated at or below the selected level. For example, if the selected level is PG-13, games rated PG-13, PG, and G can play. If you choose any level other than All Content, you must enter a pass code. If you lose or forget your pass code or have questions about this product, call the Xbox Customer Support number listed in the Troubleshooting section. troubleshooting If DVD Features Don't Work Some DVDs may not support all of the features of the Xbox DVD Movie Playback Kit, such as subtitles, multilingual audio tracks, multiple viewing angles, and slow-motion play. For more information about supported features, see the documentation from the DVD producer. In rare instances, certain DVDs may not operate properly. This is primarily due to variations in the manufacturing process or software encoding of the DVD video software. If You Need Help Should problems persist, do not attempt to take apart, service, or modify the Xbox DVD Movie Playback Kit or Xbox console in any way. Doing so could present the risk of serious injury or death from electric shock or fire, and it will void your warranty. Please see http://www.xbox.com or call the Xbox Customer Support number: United States and Canada: 1-800-4MY-XBOX Mexico: 001 866 745 83 12 If There Is No Video or Sound, or If Video or Sound Quality Is Poor Properly connect your AV cable or AV pack. For setup and audio and video troubleshooting information, see the Xbox Video Game System Instruction Manual or the AV pack instructions. Instruction Manual 7 · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. For Customers in the United States: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Note Any changes or modifications made on the system not expressly approved by the manufacturer could void the user's authority to operate the equipment. For Customers in Canada: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Xbox DVD Movie Playback Kit 8 Xbox DVD Movie Playback Kit Instruction Manual Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. (c) 2001 Microsoft Corporation. All rights reserved. Microsoft, Xbox, and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. "Dolby" and the "Double-D" symbol are trademarks of Dolby Laboratories. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Microsoft Corporation, One Microsoft Way, Redmond, WA 98052-6399 USA. Manuel d'instructions Le module DVD vidéo vous permet de lire les DVD sur la console Xbox. Ce module se compose de trois éléments : · Récepteur à infrarouge · Télécommande · Manuel d'instructions Le Module DVD vidéo doit être utilisé exclusivement avec la console de jeu vidéo XboxTM de Microsoft. IMPORTANT : Avant d'utiliser ce produit, consultez le manuel de la console de jeu vidéo Xbox. Vous y trouverez des conseils de sécurité et de santé importants. Conservez le manuel de la console de jeu vidéo Xbox ainsi que ce manuel pour référence ultérieure. Vous y trouverez notamment des informations sur la garantie. La garantie limitée du module DVD vidéo Xbox est incluse dans le manuel de la console de jeu vidéo Xbox. 9 Installation du Module DVD vidéo Pour placer les piles dans la télécommande 1. Retirez le couvercle du compartiment des piles. 2. Insérez deux piles AAA (vendues séparément) dans la télécommande. 3. Replacez le couvercle. Remarques concernant les piles : Rangez les piles hors de la portée des enfants. Évitez d'utiliser des piles usagées avec des piles neuves, ou des piles de types différents. Suivez les instructions fournies par le fabricant pour l'emploi des piles. Retirez les piles dès qu'elles sont usagées ou faibles. Recyclez-les ou mettez-les au rebut conformément à la réglementation en vigueur. Si une pile fuit, retirez toutes les piles et nettoyez soigneusement le compartiment à l'aide d'une serviette en papier légèrement humide ou suivez les recommandations de nettoyage fournies par le fabricant de piles. En cas de contact du liquide d'une pile avec la peau ou les vêtements, rincez immédiatement et abondamment à l'eau. 1. Si la console Xbox est sous tension, appuyez sur le bouton marche/arrêt pour la mettre hors tension. 2. Branchez le récepteur à infrarouge sur n'importe quel port à l'avant de la console Xbox. Pour brancher le récepteur à infrarouge MODULE DVD VIDÉO XBOX 10 Manuel d'instructions Lecture de disques DVD vidéo MODULE DVD VIDÉO XBOX Pour lire des DVD 1. Une fois le récepteur à infrarouge raccordé à la console Xbox, appuyez sur le bouton marche/arrêt de la console pour la mettre sous tension. 2. Appuyez sur le bouton Eject pour ouvrir le tiroir du lecteur de CD. 3. Placez le DVD sur le tiroir (étiquette visible). 4. Appuyez de nouveau sur le bouton Eject pour fermer le tiroir. La lecture du DVD commence. Sélection de DVD Le module DVD vidéo ne peut lire que les DVD zone 1 portant le logo ci-contre. Protection des DVD et du lecteur contre l'endommagement Ne laissez pas de disque dans la console Xbox si vous ne l'utilisez pas. Évitez de déplacer la console Xbox lorsqu'elle est sous tension et qu'elle renferme un disque. N'apposez pas d'étiquettes, d'autocollants ni d'autres objets sur les disques. Manuel d'instructions Utilisation de la télécommande et de l'affichage à l'écran Utilisez le module DVD vidéo pour la lecture de films DVD. La plupa ...