User manual MICROTEK 512M

FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inerference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: To comply with the limits for an FCC Class B computing device, always use the shielded signal cord supplied with this unit. The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. i CE mark for Class B ITE (Following European standard EN55022/1998; EN610003-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Canadian Doc Notice For Class B Computing Devices This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications. "Le présent appareil numérique n'èmet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada." ii Table of Contents The LCD Monitor Contents in the Box Installing the Monitor Cleaning OSD Controls Troubleshooting Specifications Supported Timing 1 2 3 6 7 12 13 15 iii The LCD Monitor Precautions Read all of these instructions and save the manual for later use. Follow all warning and instructions on the product. Do not cover or block the vent holes in the case. Do not insert sharp objects or spill liquid into the LCD monitor through the cabinet slots; this may cause accidental fire, electric shock or failure. Disconnect the power plug from the AC outlet if you will not use it for an extended period of time. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Do not touch the screen directly with your fingers, as you may damage the screen, and oil from your skin is difficult to remove. Do not apply pressure to screen, as the LCD is very delicate. Keep the monitor away from extreme heat, cold or humid places. Do not place directly under sunlight, dusty surroundings, or near equipment which may generate strong magnetic fields. Product Features High-contrast color TFT LCD display Supports resolution of up to XGA 1024 X 768 Compatible with IBM VGA/XGA and Macintosh standards Built-in audio system provides sound Supports DDC 1/2 & Windows PNP function Easy-to-use OSD (On-Screen Display) feature Intelligent time-out feature for energy savings and prevention of eye fatigue Optional: Audio-1 and PC line-in sound application 1 Contents in the Box 15" TFT LCD MONITOR VGA Cable Audio Cable Power Cord Adapter Note: Remember to save your original box and packaging material to transport or ship the monitor. 2 Installing the Monitor Follow these steps to install the monitor 1. 2. Before you connect the cables, make sure that the monitor and the system unit power switches are OFF. Open cover "A" located on the rear of the monitor. 3 3. Plug one end of the 15pin signal cable to the monitor and the other end to the video signal connector at the rear of the system. Tighten the two screws on the cable connector on both ends. Otherwise, the screen will be abnormal and the LED will light up as yellow (instead of the normal green color). Connect the power to the monitor through the AC/DC adapter. Connect the power cord on the AC outlet (see illustration below). 4. 5. 4 5 Cleaning Gently wipe the LCD screen with a clean, soft-lens brush or with a soft, clean, lint-free cloth. This removes dust and other particles that can scratch the screen. Do not apply pressure to the screen surface when wiping. Do not pour or spray any liquid directly onto the screen or onto the case of the LCD monitor. Chemical cleaners may very well damage the screen or the LCD monitor. 6 OSD Controls The OSD The Control Panel To use the Control Panel and navigate the OSD: 1. Press the Menu button in your Control Panel to bring up the OSD and to select the desired menu option. 2. Press the "+" or "-" buttons to navigate the OSD Main Menu and to adjust display settings. 3. Press the Auto button to automatically select the optimum settings for your monitor, based on the your current input signal. 7 Brightness: Adjusts the brightness level of the screen. Contrast: Adjusts the contrast of the screen. Clock: Corrects for video distortion. Phase: Adjusts the monitor's video phase for the best focus and visibility. 8 H-Position: Adjusts the position of the image on the LCD screen on a horizontal plane (left or right). V-Position: Adjusts the position of the image on the LCD screen on a vertical plane (up or down). Sharpness: This function is not available with this model. Text/Graphic: This function is not available with this model. Language: Allows you to choose from among eight languages including English, Spanish, German, Italian, French, Japanese, Simplified Chinese and Traditional Chinese. 9 OSD H-Position: Adjusts the position of the OSD window on a horizontal plane (left or right). OSD V-Position: Adjusts the position of the OSD window on a vertical plane (up or down). OSD Temperance: This function is not available with this model. Color Temperature: Adjusts the colors in the monitor to a warmer or cooler shade. Choose from User Color, 9300, or 6500. If you choose "User Color" (the default value) as your setting, the next menu option ("Set User Color") will remain available. If you choose "9300" or "6500" as your setting, the next menu option will be grayed out and will not be available for use. Press "+" or "-" to move among the settings. 10 Set User Color: Adjusts the RGB (Red, Green, Blue) color channels of the monitor (when in "User Color" setting from the Color Temperature menu). To use this feature: 1. Press the Menu button to enter the RGB submenu. 2. Press the Menu button once more to select the desired color channel. 3. Press "+" or "-" to increase or decrease the setting of the color channel you are in. 4. Press the Menu button a third time to return to the RGB submenu. 5. To exit Set User Color menu, press "+" or "-" until you see the "Exit" setting, then press the Menu button. Reset: Restores settings to their factory default values. Exit: Lets you exit the Main Menu. Volume: Adjusts the sound level. Input Source: This function is not available with this model. 11 Appendix A: Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. Before applying any of the following troubleshooting procedures, you should first apply the Auto Adjust option in the OSD menu. PROBLEM: There is no picture on the LCD screen Check the color of the LED indicator on the LCD Monitor. "GREEN": During normal operation the LED light will be green. However, if the LED is green but there is no picture on the LCD screen, this indicates a malfunction. Call the vendor or your reseller. "ORANGE": Check the connection of the VGA cable to the monitor our output of your computer. "NO POWER": Make sure that the power cord is securely connected to the Adapter and that the light on the Adapter is green. PROBLEM: Text on the screen is not smooth Adjust the resolution to its true setting of 1024 x 768. PROBLEM: Missing Colors If any of the red, green, or blue colors is missing, check the signal cable to make sure it is securely connected. The pins in the cable could be loose and cause a bad connection 12 Appendix B: Specifications and Supported Timing Specifications LCD type Display area Input signal Dot pitch Scanning frequency 15" XGA Color TFT 12.0 x 9.0 in (304 x 228 mm) Analog ( 0.7 Vp-p/ 75 ohm positive) 0.297 mm (H) 24.823 ~ 60.023 KHz (V) 56.250 ~ 75.087 Hz Resolution Display color Luminance Contrast ratio Response time Viewing angle Control type Plug & Play Audio Dimensions (H x W x D) 1024 x 768 16.7 million colors 250 cd/m2 (Typical) 300 : 1 (Typical) 35 ms (Typical) (H)120°/ (V)100° OSD VESA DDC 1/2B 2Wx2 14.2 x 14.7 x 9.4 in (360 x 373 x 238 mm) Gross / Net weight Vertical lift adjustment range Portrait / landscape pivot Tilt 15.9 / 12.0 lbs (7.2 / 5.46 Kg) 130 mm 90° in clockwise direction +35° / -5° 13 Swivel Tip angle Wall mount AC input Power management Power consumption +/- 35° 10° Yes (75mm x 75 mm) AC 100 V ~ 240 V , 50 / 60 Hz VESA DPMS 30 W Max (on)/ 5 W (Power-Saving OFF mode) Regulatory compliance ULc1950 / FCC CLASS B 14 Supported Timing Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SUN Mode VGA VGA Macintosh VESA VESA VGA VESA SVGA VESA VESA Macintosh XGA VESA VESA Resolution 640 x 350 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 H. Freq ( KHz) 31.469 31.469 35.000 37.861 37.500 31.469 35.156 37.879 48.077 46.875 49.750 48.363 56.476 60.023 53.960 48.290 V. Freq (Hz) 70.087 59.940 66.667 72.809 75.000 70.087 56.250 60.317 72.188 75.000 74.500 60.004 70.069 75.029 66.130 59.980 H V 17 SUN 1024 x 768 56.590 70.040 15