MINOX DD1 Instruction manual Minox DD1 English MINOX DD1 Contents Introduction For users in the United States For users in Canada Getting to know your camera The right power supply - Important information on batteries - Inserting the batteries General Instructions Installation of the PC-Software - Installing ArcSoft PhotoImpression* - Connecting the DD1 to your PC Using the DD1 - LCD status display - Symbols and explanations - Warning signals Shooting and deleting images - Distance setting - Shooting images with the self-timer - Sources of error when photograhing - Deleting images Adjusting the image resolution Adjusting the image compression Page Page Page Page Page 3 4 4 5 5 Video conference Page 14 Image processing on the PC Page 15 - Loading still images - Image download using the Camera Wizard - Image download using ArcSoft PhotoImpression - Saving images with ArcSoft PhotoImpression - Video with ArcSoft PhotoImpression - Image processing on the MacOS Uninstalling the software Page 17 Uninstalling drivers Page 18 Camera maintenance Page 19 - Places to avoid - If the camera is not used for a prolonged period of time - Travelling overseas - Cleaning your DD1 Troubleshooting Page 20 Technical data Page 21 Technical support Page 22 Conditions of warranty Page 23 Page 6 Page 7 Page 10 Page 11 Page 13 Page 13 2 *not included in scope of delivery. Optionally available from MINOX Germany. Introduction Congratulations on the purchase of your new digital camera MINOX DD1. Like all other MINOX products this digital camera boasts the traditional values fostered by the house of MINOX. It combines functionality in the smallest possible space with maximum quality. Simple and fast operation make the MINOX DD1 ideal for digital photography. It also guarantees unlimited photographic fun with its distinguished striking looks. The MINOX DD1 is now ready to become your permanent companion and capture wonderful memories in a very modern way. We wish you great enjoyment with your new camera. 3 For users in the United States FCC Declaration of Conformity This device is in conformity with Part 15 of FCC rules. Operation of the device is subject to the following two conditions: (I) this device may not cause harmful interference, and (II) this device must accept any interference received, including interference that may cause undesired operation. to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and the receiver - Contact the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help Warning Any changes or modifications to the unit not expressly approved in this manual shall make the warrantee null and void. Warning This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged 4 For users in Canada Warning This Class B device complies with the specifications of the Canadian ICES-003. Getting to know your camera 1. 2. 3. 4. 5. 6. 7. 8. 9. Shutter release Viewfinder Lens Distance setting USB Port Power On/Mode button LCD status display Battery compartment Mount for tripod The right power supply The DD1 requires a CR2 battery. Do not use rechargeable batteries. These could damage your camera and make the warrantee null and void. Please read the following important instructions and battery information prior to inserting the battery in your digital camera. Important information on batteries · The camera automatically switches back into off mode after 30 seconds of non-use, the LCD display goes blank. All images taken are then saved in the integrated memory. · All images taken remain saved on your digital camera, even when you remove the battery from the camera. · Remove the battery prior to storing the camera or if you do not plan to use it for a prolonged period of time. · Never use rechargeable batteries. · Only replace the battery when the camera is switched off. 5 Inserting batteries 1. Unscrew the cover to open the battery compartment of your DD1. 2. Take a new CR2 battery and place it in the battery compartment. Pay attention to the correct pole alignment (+)(-) which is indicated on the side of the battery. 3. Screw the cover back onto the battery compartment. Trademark information MS-DOS and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. Windows is an abbreviated term which refers to the Microsoft Windows Operation System. Other company or product names are trademarks or registered trademarks of the respective corporate enterprise. Liquid Crystal Display (LCD) If the glass of the LCD display is cracked or broken always handle any discharging liquid crystals with great caution. If one of the situations listed below should occur, please proceed as specified: - If liquid crystals should contact your skin always wipe the affected area with a cloth and then wash the skin thoroughly with soap and running water. - If liquid crystals should contact your eyes rinse the affected eye with clean water for 15 minutes and then consult a doctor. - If you should swallow liquid crystals rinse out your mouth with water. Drink large quantities of water to initiate vomiting. Then contact a doctor. General Instructions Notes on copyright Images taken with your digital camera are not to be used in any way which may infringe upon copyright laws, apart from the use of a purely private nature. Please observe that several restrictions concerning the photographic recording of stage performances, entertainment events and exhibitions even apply to private use. As user you are also requested to observe that the transfer of memory cards which contain images or data subject to copyright laws is only permitted within the framework of the respective restrictions of said laws. 6 Notes on possible electrical interference Please observe that the switched on digital camera may cause interference in other electronic equipment in e.g. hospitals or aircraft. Please observe the applied rules and warnings given in the respective areas in each case. Important note for Windows XP At the time of this product's release, Microsoft strongly encouraged companies to submit their hardware solutions for certification. If a hardware device driver is not submitted for Microsoft certification, a warning message appears. You may see this warning message, when installing the driver or update. If you do, you may choose to click the continue anyway-button. Minox has tested this driver or update on Windows XP and it does not impair or destabilize your computer. Installation of the PC-Software Before you install the software please check the computer requirements listed below in order to ensure that your computer is compatible with the software provided. Computer requirements System requirements Windows 98/SE/ME/2000/XP MacOS 9.x CPU Pentium Processor from 350 MHz or higher Mac G3 or higher iMac, iBook RAM 64 MB RAM or higher Available hard disk space 90 MB (for 98/SE/ME) 128 MB (for 2000/XP) USB interface USB Port CD installation CD-ROM drive Monitor 16-Bit color VGA Display Important As a result of possible incompatibility of USB hubs or USB interface modules, PC errors may occur during the connection or data transmission. We are therefore not able to guarantee perfect compatibility and we exclude liability for damage and loss of data. 7 Contents of the DD1 CD-ROM · DD1 Camera Driver for - Windows 98/SE/ME/XP - MacOS 9.x · Web-Cam driver for Windows 98/SE/ME/XP · User manual as PDF · Acrobat Reader Note Windows 2000, Me and XP, and MAC OS employ MASS STORAGE method to upload images from camera to computer. Therefore, no Camera Driver is necessary for image transfer. MAC OS only support still image transfers. There is no WEB-CAM feature on MAC OS. If needed, please contact our Customer Service and request the CD-Rom with this software. Please proceed according to the instructions specified below to install the ArcSoft PhotoImpression software. 1. Insert the enclosed DD1 CD-ROM in the CD-ROM drive of your computer 2. Select the language you wish to use. 3. Click on "Continue" on the start page to continue the Setup. 4. Click on "Yes" on the page with the terms and conditions, after reading them, to accept these conditions and to continue with the Setup. 5. Select the storage location on your PC where you wish to install the software and click on "Next". 6. The Setup bar appears. Please wait until this bar disappears to continue. 7. Click on "Finish" to conclude the setup. Note The ArcSoft PhotoImpression Software is not included in the Airline-Version CD. You may use other image editing software as well. Please contact our customer service and ask for the ArcSoft PhotoImpression CD-Rom, if requested. Installing ArcSoft PhotoImpression Important information ! Due to technical reasons the ArcSoft PhotoImpression Software is unfortunately not available on the DD1 CD-ROM. To process your images on a PC you can, however, use any other commercially available image processing program. 8 Connecting the DD1 to your PC For connection to the PC the DD1 must always be in camera mode (LCD display: 00), except in WebCam mode or during video conferences. To download images onto the PC connect the DD1 to your computer using the provided USB cable. Please make sure when you are connecting the camera to the computer the first time that the DD1 CD-ROM is positioned in the CD-ROM drive. Please follow the instructions given below for connecting your camera to your PC. Note Install the software before you provide the USB connection (for the first time)! DD1 Driver (for Windows 98/SE) 1. Insert the enclosed DD1 CD-ROM in the CD-ROM drive of your computer. 2. Insert the smaller USB connector in the USB port of your DD1 (on the left hand side of the camera). 3. Insert the larger USB connector in the USB port on your computer. 4. The DD1 is BUS-powered. This means the USB port provides the DD1 with power as soon as it is connected to the computer and switches it on automatically. 5. The computer/operating system recognizes the DD1 as a new unknown device. You are then requested to install the appropriate driver. 6. Follow the instructions on the screen to complete the installation of the driver for still pictures. Note When employing Windows 98/SE, make sure that the DD1 CD-ROM is in the CD-ROM drive before you connect your DD1 to the computer for the first time! For Windows 2000/ME/XP or MacOS 9.x This operating system does not require any driver installation for the DD1. You do not have to install any driver. 9 Web-Cam Driver Insert the DD1 CD-ROM in your CD-ROM drive and connect the DD1 to your computer using the provided USB cable. 1. Turn on your DD1 and press the On/Mode button to scroll to the WebCam mode (with LCD displaying VC). 2. Insert the smaller USB connector into the USB port of your DD1 (on the left hand side of the camera) 3. Insert the larger USB connector into the USB port on your computer. 4. The DD1 is BUS-powered. This means the USB port provides the DD1 with power as soon as it is connected to the computer and switches it on automatically. 5. The computer/operating system recognizes the DD1 as a new device. You are then requested to install the appropriate driver. 6. Follow the instructions on the screen to complete the installation of the WebCam driver. Note Web-Cam Driver applies to all Windows OS versions. Make sure that the DD1 CD-ROM is in the CD-ROM drive bevore you connect your DD1 to the computer for the first time! Using the DD1 LCD status display The LCD display on your DD1 indicates the operating mode, compression rate, flash mode, number of images taken and etc. Below please find Table 1 for details: Symbols and explanations 99/00 Image counter / camera mode SP/Fn Super / Fine (image compression) Hr/Lr St dL dA OF VC Lb High / Low image resolution Self-timer is activated (10 seconds) Delete last image Delete all images Switch off Video Conference Low battery 10 Warning signals Replace battery Once the power of the battery drops below a standard power level, the warning signal "Lb" is displayed. This means the battery of your DD1 will soon be empty and must be replaced. You will hear ...