32" LCD HDTV With Built-in DVD Player DTV-323-D OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS · If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of antenna-discharge unit, connection to grounding electrodes,and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ELECTRIC SERVICE EQUIPMENT NEC --NATIONAL ELECTRICAL CODE · For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges. · An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. TABLE OF CONTENTS (FOR TV TUNER) IMPORTANT INFORMATION IMPORTANT SAFETY PRECAUTIONS SUPPLIED ACCESSORIES PREPARATION INSERTING BATTERIES INTO THE REMOTE CONTROL USING THE REMOTE CONTROL UNIT CAUTIONS REGARDING REMOTE CONTROL UNIT DISPLAY FRONT VIEW REAR VIEW REMOTE CONTROL CONNECTIONS BASIC OPERATIONS TURNING ON THE POWER TURNING OFF THE POWER SIGNAL INPUT SELECTION WATCHING TV TURNING ON THE POWER TURNING OFF THE POWER SIMPLE BUTTON OPERATIONS FOR CHANGING CHANNELS USING FLASHBACK ON THE REMOTE UNIT SIMPLE BUTTON OPERATION FOR CHANGING VOLUME/SOUND SETTING MTS/SAP STEREO MODE BASIC ADJUSTMENT SETTINGS VIDEO MENU AUDIO MENU SCREEN MENU CHANNEL MENU SETUP MENU CLOSED CAPTION MENU PARENTAL MENU WINDOW ADJUSTMENT TROUBLESHOOTING TECHNICAL SPECIFICATIONS 1 2-3 4 5 5 5 5 6 6 7 8-9 10-11 12 12 12 12 13-16 13 13 13 14 15 16 17-28 17-18 19 20 21 23 24 26-28 29-30 31 32 TABLE OF CONTENTS (FOR DVD PLAYER) BASIC OPERATIONS PLAY DISCS PAUSE OSD VOLUME CONTROL DVD MENU PLAY SELECT WITH NUMBER BUTTONS PLAY DISCS IN VARIOUS WAYS AUDIO MODE MUTE FAST PLAY REPEAT PLAY ZOOM PLAY SELECT SUBTITLES PROGRAM PLAY SHUFFLE (RANDOM) PLAY MENU SETTING GENERAL SETUP AUDIO SETUP PASSWORD SETUP PREFERENCES MP3 OPERATIONS KODAK PICTURE CD PLAYBACK DIGITAL CARD PLAY OPERATION TROUBLESHOOTING TECHNICAL SPECIFICATIONS 33-37 33 33 33-36 36 36 37 37-41 37-38 38 38 39 39 40 40-41 41 42-46 43-44 44-45 45 46 46 47 48 49 50 IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ''dangerous voltage'' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the product. FCC RF INTERFERENCE STATEMENT NOTE: This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measure. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Correct the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio, TV technical for help. Only shielded interface cable should be used. page1 IMPORTANT SAFETY PRECAUTIONS The present set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in the present unit will protect you if you observe the following procedures in installing, using and servicing. The present unit is fully transistorized and does not contain any element that can be repaired by the user. 1. Read these instructions - All operating instructions must be read and understood before the product is operated. 2. Keep these instructions - These safely and operating instructions must be kept in a safe place for future reference. 3. Heed all warnings - All warnings on the product and in the instructions must be observed closely. 4. Follow instructions - All operating instructions must be followed. 5. Attachment - Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents. 6. Power source - This product must operate on a power source specified on the model label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. 7. AC cord protection - The AC cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. 8. Overloading - Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. 9. Entering of objects and liquids - Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product. 10. Servicing - Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing. 11. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service person to perform repairs. a) When the AC cord or plug is damaged. b) When a liquid was spilled on the product or when objects have fallen into the product. c) When the product has been exposed to rain or water. d) When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e) When the product has been dropped or damaged. page2 IMPORTANT SAFETY PRECAUTIONS f) When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts - In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13. Safety checks - Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 14. Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. 15. Unplug the AC cord from the AC outlet before installing the speakers. 16. Cleaning - Unplug the AC cord from the AC outlet before cleaning the product. Use only with a dry cloth to clean this apparatus. Do not use liquid or aerosol cleaners. 17. Water and moisture - Do not use this product near water such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. TV set shall not be exposed to dripping or slashing and no objects filled with liquid, such as vases, shall be placed on the TV set. 18. Stand - Do not place the product on an unstable cart, stand, tripod or table. Unstable installation is likely to make the product fall resulting in serious injuries as well as material damage. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 19. When a cart is used, use caution when moving the cart/apparatus combination to void injury from tip-over. 20. Ventilation - The vents and other openings in the cabinet are designed for ventilation. Do not cover or block them since insufficient ventilation can overheat and/or shorten the product s life span. Do not place the product on the bed, sofa, rug or other similar surfaces since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions are followed. 21. The LCD panel used in this product is made of glass. Therefore, it can be broken when the product is dropped or gets shock. Be careful not to be injured by glass pieces in case the panel is broken. 22. Heat sources - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 23. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect your product's performance. page3 SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. AV cables Component Video Cable or Y/Pb/Pr cable POWER TV DVD/ USB/CARD P.MODE VIDEO S.MODE 32" LCD HDTV With Built-in DVD Player 1 2 3 10/0 +10 DTV-323-D OWNER'S MANUAL 4 5 6 FAVORITE 7 VOL 8 CC 9 CH MTS/SAP MUTE TV MENU FLASHBACK OK DVD TITLE DVD MENU OSD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT PLAY MODE SUBTITLE A. MODE RETURN VIEW MODE RC-175C Remote control Audio cable for PC input User guide It also include: batteries (2) Warranty card page4 PREPARATION INSERTING BATTERIES INTO THE REMOTE CONTROL Insert supplied batteries via the battery compartment on the back of the remote control. Make sure polarity matches the (+) and (-) marks inside the compartment. USING THE REMOTE CONTROL UNIT POWER TV DVD/ USB/CARD P.MODE VIDEO S.MODE 1 2 3 100 / +10 Use the remote control by pointing it towards the remote sensor on the TV. Objects between the remote control and the sensor may disrupt operation. Effective range is 20 feet but is dependant on what your viewing angle is. Range can also be affected by direct sunlight on the TV's sensor. 4 5 6 FAVORITE 7 VOL 8 CC 9 CH MTS/SAP MUTE TV MENU FLASHBACK OK DVD TITLE DVD MENU OSD PREV NEXT ZOOM SETUP FR FF AUDIO REPEAT PLAY MODE SUBTITLE A. MODE RETURN VIEW MODE RC-175C CAUTIONS REGARDING REMOTE CONTROL UNIT Do not expose remote to liquids, direct sunlight or shock. The remote control unit may not work properly if the remote sensor window of the Display is under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display, or operate the remote control unit closer to the remote sensor window. page5 DISPLAY FRONT VIEW 4 5 6 7 8 SOURCE MENU VOL VOL CH CH ON/OFF 9 SD/ MMC 10 MEMORY STICK DVD/CARD 11 PLAY/PAUSE PREV NEXT 12 13 14 15 EJECT 321 1) STANDBY INDICATOR 2) POWER ON INDICATOR 3) REMOTE SENSOR 4) SOURCE: Use to select the AV signal source among: Digital TV, Analog TV, Composite , S-Video, Component, DVD, HDMI and DVI. 5) MENU: Use to bring up the TV menu. 6) VOLUME+/-: Use to adjust the volume. 7) CH+/-: To skip to the previous/next channel; in other mode, press it to shift to TV mode. 8) Power Button: Use to turn the unit on or off. 9) DISC SLOT: Insert a DVD or CD disc to play under DVD status. In other status, insert a disc to change to DVD status. 10) MULTI MEDIA CARD/SD/MEMORY STICK CARD SLOT 11) DVD/CARD: In DVD ...