User manual MOBIBLU DAH-1100

Direct -Connect USB Flash MP3 Player with Graphic LCD Safety Instructions Warning To reduce danger of fire or electric shock, do not expose the product to rain or moisture. Do not release or distribute the music files formatted in WMA or MP3 from the product to the public. (As this would violate Copyright laws.) The software contained on the installation CD-ROM is for personal use only and it not to be distributed. To maintain best quality from the player Do not use the product in hazardous conditions, such as extremely high/ low temperatures, dusty area, or excessively wet areas. Do not leave the product in the bathroom, near/ on a heater, or in a car parked in the direct sunlight. Do not leave batteries in pockets with any metallic substance such as coins or keys.(Doing so may cause fire from the batteries contacts) Throwing or dropping the product can cause shock damage. Avoid sudden shock Any data lost due to careless use is not our responsibility. (Any valuable data should be stored on your PC) Caution when using headset Auditory sense may be damaged when listening to the music at a high volume for extended time periods. Using a headset while driving a car or riding bicycle/motorcycle is not recommended. Use caution when walking or jogging with device. Ear-in type headset should have a long wire to be located at the back of the neck. Do not ever disassemble to repair or rebuild the product as it may cause permanent damage. Feature and Capacity of Products Feature Digital Audio Player which supports multi-format 1) MP3: 8~320Kbps 2) WMA: supporting over 8Kbps Graphic LCD and EL backlight. Multi Language Support. (Korean/English/Japanese/Chinese) Firmware upgrade by the Internet. Portable USB store equipment. low power consumption : It's possible to play 11 hours continuos playback. It provides a variety of Menu for suiting customer's taste. USB Combo User Manual Contents 1. Confirm the contents 2. Look at the title of the each part 3. Put in the battery 4. Connect to the computer 5. File download/ upload 6. Separate from USB Combo 7. Look at the title of the part of LCD 8. Look at the basic function of the digital Audio Player 8.1 Turn on 8.2 Playback 8.3 Control the volume 8.4 Search for other song 8.5 Set up the section repetition 8.6 Set up the sound effect 8.7 Set up the section repetition 8.8 Set up the contrast 8.9 Set up the backlit 8.10 Set up the power saving 8.11 See the registration information 8.12 Select the language 8.13 The Return 9. FM Radio mode 10. Use the lock 11. Install a software 12. Format 13. Upgrade the firmware 14. Troubleshooting Problems 15. WARRANTY SERVICE 16. FCC RF INTERFERENCE STATEMENT 1 2 3 4 5 6 7 8 8 8 9 9 10 11 11 12 12 13 13 14 14 15 16 18 19 20 21 22 23 General specification Size(W x H x D) : 87 14 46 mm Shape LCD : Graphic LCD (128 64) Built-in Nand Flash Memory (32MB/64MB/128MB) It implements the Key - Play : Turn on/off, Playback, Pause - FF : Forward - REW : Backward - Volume : Mute ­ Max ( 31 Steps) - Menu Equalizer : 5 different kinds EQ selection (Rock/Jazz/Classic/Pop/Flat) Repeat : Repeat One/ All, Random One/All/OFF Contrast : Control by Graphic Backlight : 0Sec ~ 20Sec Power Saving: 1Min~10Min About : Firmware Version/Memory information Language ; Korean / English / Chinese / Japanese Circumstances It's used in Win98 / ME / 2000 / XP Note : Win98 is provided by the separate driver 1. Confirm the contents 1 2. Look at the title of the each part USB terminal LED Earphone Connecting terminal The next track/ previous track/ all the track/ menu button Turn on/ Play/ Stop button Volume control 2 Install CD USB Combo Earphone LCD Neck Strap hanger Battery case USB extension cable battery(AAA_1) Battery cover User Manual Neck Strap Lock button 3. Put in the battery 3 4. Connect to the computer Pull and separate the battery case and USB drive to an arrow direction. 4 Connect to the USB drive. At this time you can use it by connecting to the USB extension cable or connecting to the computer. Remove the battery cover by pushing the battery cover to an arrow direction. Put in the battery adjusting to plus/ minus polarity. Push and close the battery cover to an arrow direction adjusting to the groove. Pull the USB drive which is correctly adjusted to the groove of the battery case. Caution: If it's not exactly connect, it can not play. 5. File download/upload If USB drive connects to the computer, new portable drive is added. You can use it such as adding or deleting the data on the hard disk by Windows explorer Note: Music files(MP3, WMA) are just shown on LCD and the data files are shown on Windows explorer 5 6. Separation from USB Combo Safely Remove Hardware... First, you click Left button on device manager from property menu. then "Safely Remove Hardware" will display. Click it with Right button. 6 Possible to add the portable drive Click 'stop(S)' button. If USB drive connects to the computer, the message such 'USB Connected...`show up.The message such 'USB Connected...`and LED flicker During the transfer, otherwise they didn't flicker and then USB drive separate from the computer. Caution: The file is damaged or the cause of the product problem if the USB drive separate from the computer while the file is transferring. After you click `Safe To Remove Hardware' you separate USB drive. USB Connected... After you select USB Combo MSC USB Device, you click `OK'. Caution : If you don't separate USB drive safely, the file can be damaged or the data should be lost. 7. Look at the title of the part of LCD MP3/WMA display Playback status display The section repetition display Bit rate display 7 8. Look at the basic function of the digital audio player 8.1 Turn on Push 'Playback/ Stop' one round 8 Playing song number/ Total song number Playing song Title display Playback time You can see the logo when LCD is turned on. The status of stop scene of LCD. Volume display EQ mode display FLAT ROCK JAZZ CLASSIC POP 8.2 Playback The left capacity of the Hold display Hold display Playback order display OFF REPEAT ONE REPEAT ALL RANDOM ONE RANDOM ALL Push 'Playback/Stop' for the first scene A stop mode. The title of the song is scrolled. 8. Look at the basic function of the digital audio player 8.3 Control the volume Volume control button 9 8. Look at the basic function of the digital audio player 8.5 Set up the section repetition What's the section repetition? It's the function that you want to listen to the specific part repeatedly It's easy to listen repeatedly for the language studying. 10 Menu button Playback status. It's possible to control the volume from 0 to 30 Volume(0):VOLUME MUTE Volume(30):VOLUME MAX If there is no key input after controlling the volume for 3sec, the normal status is returned. It's possible to control at high speed if you push 'Volume Control' When you push the Menu button shortly once, the section repetition is started(A). 8.4 Search for other song Previous song/ Next song You can search for the song by the button 'Next song(FF)/Previous song(REW)' at Playback/Stop status. For playback if you push the button 'Previous song' in 5 seconds, it moves to the previous song. If you push the button 'Previous song' after 5 seconds, it moves to the first of the playback song. If you push a long time 'Next song/Previous song' , you can search at high speed for the specific part of the song When you push the Menu button shortly once more, the section repetition is ended(B) Note: For closing the section repetition you push the Menu button shortly once or you operates the button in the direction of the next song/previous song. When it turns next song it will finish repeat automatically. 8. Look at the basic function of the digital audio player 8.6 Set up the sound effect What's the sound effect? It's the function that you want to listen to the specific sound with emphasis. 11 8. Look at the basic function of the digital audio player 8.8 Set up the contrast What's the contrast? It's the function that the shade of the screen is controlled. 12 If you push the Menu button with long(over 700ms), the function of Menu is returned. After searching the sound effect using the 'Next song/previous song' you push the Menu button with short(below 700ms) After choose sound effect press menu button for a while it will return to play/stop.If there is no key input for 7 seconds, the 'Playback/stop' is operated (ROCK/JAZZ/CLASSIC/POP/FLAT) 8.7 Set up the section repetition What's the section repetition? It's the function that the playback order is arranged. OFF->Total song playback once in stored order REPEAT ONE->The present song playback unlimitedly REPEAT ALL->The files are playback in stored order and repeatedly RANDOM ONE->Total song playback once without order RANDOM ALL-> Total song playback without order and repeatedly After searching the brightness using 'Next song/previous song' at Menu you push 'Menu' button with short.After beginning the brightness you control the brightness using 'Next song/Previous song`If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. 8.9 Set up the backlit What's the lightening? It's the function that the LCD is clear at the dark place. If you push the button, it's operated After searching the repeat function using 'Next/Previous song' at Menu, you push Menu button with short. After beginning the repeat function, you search the repeat function using 'Next/Previous song' If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. (OFF/REPEAT ONE/REPEAT ALL/RANDOM ONE/RANDOM ALL) After searching the lightening using 'Next song/previous song' at Menu you push 'Menu`button with short. After beginning the lightening you control the lightening time using 'Next song/Previous song`If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. (It's possible to set up from 0 to 20sec) 8. Look at the basic function of the digital audio player 8.10 Set up the power saving What's the power saving? It's the function that the player is turned off at the no input. 13 8. Look at the basic function of the digital audio player 8.12 Select the language. What's the select of the language? It's the function that you select and use the language classified by nation. 14 After searching the lightening using 'Next song/previous song' at Menu you push 'Menu`button with short. After beginning the power saving you control the power saving time using 'Next song/Previous song`If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. (It's possible to set up from 1 to 10min) After searching the Language using 'Next song/previous song' at Menu you push 'Menu' button with short. After beginning the language you select the used language using 'Next song/Previous song' If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. (ENGLISH/KOREAN/CHINESE/JAPANESE) 8.11 See the registered information What's the registered information? It's the function that you confirm the firmware version and total memory. 8.13 The Return RETURN ? It's the function that the normal state is returned after completing of the setting. After searching the registered information using 'Next song/previous song' at Menu you push 'Menu' button with short. If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. After searching the return using 'Next song/previous song' at Menu you push 'Menu' button with short. If you push the menu button with long, 'Playback/Stop' is operated. In the case of no input over 7sec 'Playback/Stop' is operated. 9. FM Radio mode Choose F.M Radio on the menu item and Press "Menu" button quickly once to get in F.M. Radio mode. Press button for long time or if there's input, player go back to play/pause mode. 1. Change preset - Use "FF/REW" switch to change preset. 2. Find preset - Use "Vol +/-" button to find channel. 3. Auto channel find - Press menu button quickly once in the seek mode to find radio channel automatically. 4. Manual channel find - Use "FF/REW" switch to find radio channel in the seek mode. - Press "FF/REW" switch for long time to find radio channel automatically. 5. Save preset - Find channel in the seek mode and select preset to save with "Vol +/-" button.Then press "Play" button to get in save mode and save radio channel on the selected preset. 6. Volume control in the F.M. Radio mode - Seek mode : Press "Vol +/-" button for long time to change volume - Save mode : Same as music mode 15 10. Use the lock What is a lock device? It is a device for preventing the user from operating a button by mistake. 16 Lock button When the lock button moves to the direction of an arrow, you can show the lock indication with a sparking 'holding...' message Note: After using a lock device, you cannot operate the machine even using any buttons. Especially, when you power on in the lock state, it is not operate. 11. Install a software The customers who use a window 98/98SE should install a software and use this machine. The customer who use a window ME/XP/2000 need not to install a software. 17 11. Install a software 18 Double click a Setup.exe file after inserting a CD into the CD ROM Click the Next button Click the Next button We are going to the next step. Click the Next button * Please see the next page Click the Yes button Click the finish button The software installation is completed. 12. Format Caution: In the case of a format, the user of window 98/98SE/ME/XP/2000 should install a software provided by the company. In the case of using a existing format of computer such a FAT32, NTFS, it is possible that this machine does not operate normally. Before the format, you had better backup.The separation USB drive from computer on the format process may result to a product trouble. To upgrade a firmware, you should wait for about 10 seconds with pushing a play/stop button and connecting before connecting an USB drive to the computer. Note: If the start button is not activated after executing an upgrade software, it shows that the USB drive is not connected normally.(In this case, you should reconnect the USB drive) 19 13. Upgrade the firmware Caution: You had better not use the upgrade because it can damage to the machine.The customer who want a firmware upgrade can upgrade by downloading a latest version in our homepage(http://www.m-any.com) Before the upgrade of firmware, you had better backup the important file. To upgrade a firmware, you should wait for about 10 seconds with pushing a play/stop button and connecting before connecting an USB drive to the computer. Start->program->USB Combo->Firmware Upgrade Push the start button. After finishing the memory Firmware Upgrade, you can complete with the close button. 20 The present firmware version Format type He present memory location Indication of total memory The firmware version to be upgraded Select Quick/ Low download Start->program->USB Combo->Format Push the start button. After finishing the memory format, you can complete with the close button. Note: After completing the format, you should reconnect the USB drive to PC to use normally. Note: In the case of the progress bar's not being proceeded in the above figure, it shows that the USB drive is not connected normally. In this case, push the play/stop button after disconnecting an USB drive with PC and reconnection the USB drive to the PC. 14. Troubleshooting Problems If you encounter any of the problems listed below, follow the suggested solutions. 1.No Power. - Is the battery inserted correctly? - Is hold switch OFF? - Is the player combined with USB credle? - Is the battery empty? 2.No Playback. - Check if the files are in MP3 or WMA format. 3.No Sound. - Is the volume level adjusted? - Is the earphone properly connected? 4.Broken characters appear in the LCD Screen. - Check if the Language settings is connect in the Menu item. 5.Firmware upgrade function does not work. - Check your internet connection. 21 15. WARRANTY SERVICE Customers are entitled to warranty service for a period of one year from the date of purchase. Warranty service does not apply to defects resulting from customer fault or acts of God. Non-warranty service shall apply to defects resulting from: 1. Infiltration of foreign matter, such as water, liquid, or sand. 2. Breakage due to dropping or severe impact. 3. Damage to or deformation of the outer case caused by organic solvents, such as benzene. 4. Use of parts other than those certified by the manufacturer. 5. Loss or breakage of any parts or components caused by unauthorized disassembly. 6. Repair or modification done by any persons other than manufacturer authorized personnel. 7. Acts of God, such as lightning, storm or flood. 8. Purchase from unauthorized retailers. For more warranty information and service options, please visit the Hyunwon web site at http//:www.m-any.com 22 16. FCC RF INTERFERENCE STATEMENT Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio, TV technical for help. - Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment. CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 23