User manual MONACOR DVC-16100

Digital Video Capture Card DVC-Series USER'S MANUAL DVC ­ 4025 DVC ­ 1650 DVC ­ 16100 DVC ­ 16200 DVC ­ 400 RTC DVC ­ X AI DVC ­ 4 IO 2 Table of Contents Features System Specification Recommendation Chapter 1. DVC Hardware 1.1 DVC Line-up 1.2 DVC ­ 4025 1.3 DVC ­ 1650 1.4 DVC ­ 16100 1.5 DVC ­ 16200 1.6 DVC ­ 400RTC + DVC ­ 16100 1.7 DVC ­ 400RTC + DVC ­ 16200 1.8 DVC ­ 4AI 1.9 DVC ­ 8AI 1.10 DVC ­ 2AI 1.11 DVC ­ 1AI 1.12 DVC ­ 4IO 1.13 4 CH BNC Guide Connection Chapter 2 DVC Software 2.1 Driver Installation 2.2 DVC Program Installation 2.3 Folders Created 2.4 DVC Program Image Files 2.5 Language Alternation Chapter 3. Live Mode Important Notes before running DVC Program 3.1 Live Mode 3.2 Selecting On Screen Divison Mode 3.3 Pan/Tilt/Zoom Operation 3.4 Screen Movement 3.5 Camera/Alarm-Out/TV-Out Selector 3.6 Instant Replay 3.7 Emergency Recording 3.8 System Lock 3.9 Manual back-up 3.10 E-map 3.11 Voice communication Chapter 4. Search Mode 4.1 Search Mode 4.2 Print Images 4.3 Save Images To BMP or JPG ------------------------------------------------------------------------------------------------------------------------------------------------------------44 45 46 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------27 28 29 29 30 31 32 33 34 35 37 40 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------19 20 24 24 25 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------5 6 7 8 9 10 11 12 13 14 15 16 17 --------------------------------------------------------------------------------------------------------4 4 Monacor international Co., Ltd. 3 4.4 Add To Bookmark / View Bookmark List 4.5 Search setup 4.6 Event Search 4.7 Object Search 4.8 Digital zoom Chapter 5 Setup Mode 5.1 Setup Mode 5.2 System Setup 5.2.1 Recording & Backup Drive Setup 5.2.2 User Registration 5.2.3 Rebooting Setup 5.3 Camera Setup 5.3.1 Setting General Camera Properties 5.3.2 Setting Motion & Color Properties 5.3.3 Setting Pan/Tilt 5.4 Schedule Setup 5.5 DI Surveillance 5.6 Network Setup 5.7 Control Setup 5.8 Backup Setup Chapter 6 Program Tools 6.1 Capture Clear Tool 6.2 External Player Tool 6.3 Index Builder Tool 6.4 Watermark Verification Tool Chapter 7 Network Function 7.1 Remote Client Program 7.2 Connecting From Remote Client Program 7.3 Client System Setup 7.4 Client Option Setting 7.5 Registering Server List 7.6 Viewing Remote Recordings 7.7 Viewing Through Web Browser ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------82 83 84 85 86 87 88 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------74 76 78 79 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------54 54 55 56 57 58 59 60 61 62 65 66 69 72 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------47 49 50 51 52 Monacor international Co., Ltd. 4 Features Max. 32-Ch camera inputs ( Only with 2 x DVC ­16100 ) Display speed at max. 400fps / Recording speed at max. 200fps Provides Mpeg4 and MJpeg compression algorithm High resolution at 640x480 Max. 8-Ch audio recording (Optional) Various alert modes upon various events Pan/Tilt/Zoom control on both server and client side 6-level of security access Digital watermark support Dynamic IP support Multiple and simultaneous remote connections Allows access from Windows CE installed PDA through mobile internet High performance, durable rack mount case System Specification Recommendation The below is the recommended computer specification to work with DVR board. Model CPU Motherboard OS Memory HDD VGA Power DVC4025 ­ DVC1650 Pentium Celeron 1.7GHz or above Intel 865 Chipset Motherboard or above (Aopen AX4SPE-N VALUE is recommended for over 200fps DVR) Win 2000/XP 256 Mbyte or above 80G or above ATI Expert 2000 Pro / Geforce 2 MX200 with video ram 32M or above 110/220V 300W DVC16100 ­ DVC16200 Pentium IV 2.0Ghz or above Monacor international Co., Ltd. 5 Chapter 1 DVC Hardware 1.1 DVC Line-up Prodcut Line-up Model DVC-4025 DVC-1650 DVC-16100 DVC-16200 DVC-400RTC Video Input 4Ch 16Ch 16Ch 16Ch 16Ch Display / Recording 25fps / 25fps 50fps / 50fps 100fps / 100fps 200fps / 200fps 400fps Audio Input 1 2 4 (Option) 8 (Option) Monacor international Co., Ltd. 6 1.2 DVC-4025 Formation : one DVC-4025 board DI/DO Terminal TV Out Camera Input 1 Camera Input 2 Camera Input 3 Camera Input 4 Watchdog Terminal < DVC-4025 Board > Monacor international Co., Ltd. 7 1.3 DVC-1650 Formation : one DVC-1650 board + one 16-Ch BNC Cable TV Out Impedence Jumper Arrangment Impedence : match the impedence value of video signal to the analog TV monitor property. (Default) NC : no impedence matching from capture card. Camera Input Terminal For Back Panel Connetion DI/DO Terminal Audio Input Terminal 16-Ch BNC Cable TV Out To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection Monacor international Co., Ltd. 8 1.4 DVC-16100 Formation : one DVC-16100 board + one 16-Ch BNC Cable To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection Camera Input Terminal For Back Panel Connetion DI/DO Terminal Audio Card Connect Terminal 16-Ch BNC Cable TV Out Impedence Jumper Arrangment TV Out Impedence : match the impedence value of video signal to the analog TV monitor property. (Default) NC : no impedence matching from capture card. Monacor international Co., Ltd. 9 1.5 DVC-16200 Formation : one DVC-16200 board + one 16-Ch BNC Cable To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection Camera Input Terminal For Back Panel Connetion DI/DO Terminal Audio Card Connect Terminal < DVC-16200 Board> 16-Ch BNC Cable TV Out TV Out Impedence Jumper Arrangment Impedence : match the impedence value of video signal to the analog TV monitor property. (Default) NC : no impedence matching from capture card. Monacor international Co., Ltd. 10 1.6 DVC - 400RTC + DVC - 16100 Formation : one DVC-16100 board + one DVC-400RTC Board + one BNC Cable + one Quad guide To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection Camera Input Terminal DI/DO Terminal Audio Card Connect Terminal < DVC-16100 Board > TV Out 1 (Ch1~4) TV Out 2 (Ch5~8) TV Out 3 (Ch9~12) TV Out 4 (Ch13~16) Extra Quad TV Outputs (Optional) Camera Input Terminal For Back Panel Connetion < DVC-400RTC Board > 16-Ch BNC Cable TV Out Monacor international Co., Ltd. 11 1.7 DVC - 400RTC + DVC - 16200 Formation : one DVC-16200 board + one DVC-400RTC Board + one BNC Cable + one Quad guide To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection DI/DO Terminal Audio Card Connect Terminal < DVC-16200 Board > TV Out 1 (Ch1~4) TV Out 2 (Ch5~8) TV Out 3 (Ch9~12) TV Out 4 (Ch13~16) Extra Quad TV Outputs (Optional) Camera Input Terminal For Back Panel Connetion < DVC-400RTC Board > 16-Ch BNC Cable TV Out Monacor international Co., Ltd. 12 1.8 DVC-4AI Formation : one DVC-16100 board + DVC-4AI < DVC-16100 Board > 60 Pin Connection Audio In 1-4 < DVC-4AI > 4ch RCA connection 4-ch Audio Board Capture Board Monacor international Co., Ltd. 13 1.9 DVC-8AI Formation : one DVC-8AI board + one DVC-16200 board < DVC-16200 Board > 60 Pin Connection RCA-toD-Sub Input Cable PCI Slot Audio In 1-8 Monacor international Co., Ltd. 14 1.10 DVC-2AI Formation : one DVC-2AI + DVC-1650 + one flat cable Monacor international Co., Ltd. 15 1.11 DVC-1AI Formation : DVC-1AI board + one DVC-4025 + one AV cable Monacor international Co., Ltd. 16 1.12 DVC-4IO To Serial Port on PC PTZ Signal Cable RS422/485 Sensor Input To DI/DO Terminal on capture board Alarm Output [ Sensor Input Terminal ] [ Alarm Output Terminal ] 1. Connection Connect one signal lineto COM port and connect Another signal line to the desired sensor number. 2. Operation - Normal : 1-4 Terminal & COM Port Open - Sensor Detection : 1-4 Terminal & COM Port Close 3. At normal close mode, it works reversely. 1. Connection Connect both power lines to DO terminal 2. Operation - Normal : DO Terminal Open - Control Output : DO Terminal Close 3 D/O Voltage .DC 30V, 1A or below .DC 110V, 0.3A or below .AC 125V, 500mA or below Notes ; - N/O : Normal Open - N/C : Normal Close - DI Operation Mode (N/O or N/C) can be selected from Setup Mode of Sentry Program - D/O Delay Time can be adjusted from Setup Mode of Sentry Program Monacor international Co., Ltd. 17 1.13 4-Ch BNC Guide Connection to DVR Board A Black 4-Ch BNC Guide Brown Red Orange Yellow Green Blue Violet Detail of A Pin No. Signal Ground 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Camera Input Terminal on DVR Board Line Color Matching to Each Pin on Terminal Pin No. Signal GND Pin No. Signal GND Pin 1 Black Brown Pin 9 Black Brown Pin 2 Red Orange Pin 10 Red Orange Pin 3 Yellow Green Pin 11 Yellow Green Pin 4 Blue Violet Pin 12 Blue Violet Pin 5 Black Brown Pin 13 Black Brown Pin 6 Red Orange Pin 14 Red Orange Pin 7 Yellow Green Pin 15 Yellow Green Pin 8 Blue Violet Pin 16 Blue Violet In case of using over two pcs of 4-Ch BNC Guides, you can connect to Pin 5 ~ Pin 16. Monacor international Co., Ltd. 18 Chapter 2 DVC Software Monacor international Co., Ltd. 19 2.1 Driver Installation 1. Simply run "DVRDriverSetup.exe" in "Driver-2005-00-00" folder in CD-Rom provided. 2. Then DVR Device Driver Setup program will come out as shown below. Select one installation option. - Install DVR Device Driver : select when installing to a new computer after the new capture card assembly - Remove & Install DVR Device Driver : select when reinstalling to the existing device driver with the latest driver - Remove DVR Device Driver : select to delete all DVR device driver of our capture card - Remove any DVR Device Driver associated by BT878 : select to delete all device drivers relating BT878 (Usable when other brands capture using BT878 was installed previously) 3. Press OK. Then the system will reboot after completion. Device Manager View After Driver Installation Monacor international Co., Ltd. 20 2.2 DVC Program Installation 1. Run "Setup.exe" in the folder in the CD-Rom provided. 2. Click "Next" 3. Specify the destination to install and click "Next" Monacor international Co., Ltd. 21 4. Check on three options and click "Next" 5. Select the video type and click "Next" 6. Now installation is being performed. Monacor international Co., Ltd. 22 7. Now the installation has been finished. Click "Finish" to restart the system. 8. Then doubleclick "DVSS4" icon on the desktop to run the program. And the board type selection menu will come up. Check on suitable board type from the list and click "OK" Monacor international Co., Ltd. 23 9. Then "Recording Drive Setup" will come out. Select a drive available and select the recording type, "record or backup". Then click "Apply" and OK". 10. Then DVR program will run. Monacor international Co., Ltd. 24 2.3 Folders Created After DVR Program Installation The below folders are created after DVR Program installation. Folder Name Language LogFile PanTilt Skin Sound Tools Update WebPages Description Language files exist System Log files exist PTZ Driver files exist GUI skin file exists Sound files (*.wav) used in DVR program exist Utilities exist (Backup, Backup Player & CaptureClear) Temp folder for download when real-tim update Web files for web service exists 2.4 DVR Program Image Files There are a few image files used in DVR Program. The files can be replaced with the ones that the users desire to have. File Name Logo.bmp MiniLogo.bmp Splash.bmp DVSS4WallPaper.bmp Playbacklogo.bmp Disconnect.bmp Note Description Shown on blank channel where no camera input exists from main GUI Shown on main GUI to display supplier's logo Shown when loading Sentry DVR Program Wallpaper when used on DVR mode Shown on blank channel where no camera input exists from playback GUI Shown when no video signal Size 320 X 240 98 X 50 500 X 200 1024 X 768 320 X 240 320 X 240 Format BMP BMP BMP BMP BMP BMP Path C:/DVSS4/Image C:/DVSS4/Image C:/DVSS4/Image C:/DVSS4/Image C:/DVSS4/Image C:/DVSS4/Image - You can make image files and copy them to image folder. - In order to apply customized images from install stage, you can make image folder in installation folder (ex ; Server-2003XXXX) and copy the image files to the folder. Monacor international Co., Ltd. 25 2.5 Language Alternation You can customize the language used in Sentry DVR Program Setup by editing lanuage file in C"DVSS4\Language folder. Normally the initial language is English after the installation. Procedure 1. Go to "C"DVSS4\Language". 2. Open "Lang.ENU.ini". 3. Its content is ; [SYSTEM] MainColor = 166 184 206 (Basic Color) TextColor = 0 0 0 (Font Color) EditColor = 0 0 0 EditTextColor = 0 255 0 FontName = Verdana (Font Name) FontSize=14 (Font Size) FontStyle = 700 (Font Type Bold:700, Normal:400) [MESSAGE] cancel = cancel yes = yes ... [MENU] [RECORD] ... Ex ) yes = si (when changing from English to Italian) Language change starts below this line. Input the term with your language on the right to "= "mark Monacor international Co., Ltd. 26 Chapter 3 Live Mode Monacor international Co., Ltd. 27 Important Notes Before Running DVR Program Before Operating DVR Program 1) Recycle Bin Setup Check on the box "Do not move files to the Recycle Bin. Remove files immediately when deleted." in the property of Recycle Bin. 2) Display Setup - Set resolution at 1024x768 and High Color 16bit. - Set "System Standby", "Turn off monitor" and "Turn off hard disk" at "Never" in Display Properties\Power Management Properties\Power Schemes. 3) Rebooting Setup We highly recommend you to set automatic daily rebooting in idle time for most stable system operation. 4) Operating System As Sentry Software was bulit on Windows 2000 platform, it operates most stable on Windows 2000 platform. You can use Windows XP as well. 5) DirectX DirectX Verison 8.1b or above Monacor international Co., Ltd. 28 3.1 Live Mode After running DVR program, the below GUI immediately executes. It displays the real-time images coming from the attached cameras and contains functional buttons for switching to other setup modes. Image Display Window Date/Time Sytem Status Search Mode Setup Mode System Lock Emergent Recording Instant Replay Voice Communicaiton Manual Backup E-map Viewer Screen Division PTZ Control Close Program Camera/Alarm/TV-Out Panel System Status HDD Space Network Connection Video Switching Automatic Back-up Event (Motion/Sensor) Monacor international Co., Ltd. 29 3.2 Selecting On Screen Division Button 1-Split ~ 36-Split Full Screen Mode PC Monitor Switching TV Monitor Switching Reset Screen Full Screen Mode Button ; hides all buttons and displays only video. To return, click wheel button on mouse. PC/TV Switching Mode Button ; video channels on PC and analog TV monitor will be switched in sequential order through selected screen division. Clicking on each screen division button switches videos manually on each screen division. Reset Screen ; return to default video arrangement in case of moving camera views to another locations by drag-and-drop. 3.3 Pan/Tilt/Zoom Operation Pan/Tilt Movement Focus Near Zoom Out Focus Far Zoom In PT Option Button If Pan/Tilt is set for the camera from "Camera Setup\Pan/Tilt Setup", Pan/Tilt icon will be dispayed on the camera view. To control additional PTZ functions like preset or auto pan, press PT Option Button. PTZ Controller by PT Option Button looks different depending on PTZ protocol type. Monacor international Co., Ltd. 30 3.4 Screen Movement You can freely change the location of each screen by drag-and-drop on display screen. 1. Select the screen which you want to move to another location. CAM01 CAM02 CAM03 CAM04 CAM05 CAM06 CAM07 CAM08 CAM09 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM16 Click 2. Drag the screen to the location that you want to move to. CAM01 CAM02 CAM16 CAM05 CAM06 CAM07 DragCAM09 CAM10 CAM11 CAM12 CAM08 CAM03 CAM04 CAM13 CAM14 CAM15 3. Drop the screen to the location where you move to. CAM16 CAM02 Drop CAM05 CAM06 CAM07 CAM08 CAM03 CAM04 CAM09 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM01 You can return back to default status clicking reset button on screen division select button. Monacor international Co., Ltd. 31 3.5 Camera/Alarm-Out/TV-Out Panel 1. Camera Select Panel On each split mode of screen, clicking one channel button will show the split mode including the channel clicked. (ex : If on 4 split mode with 16 ch inputs, clicking no. 1 channel will display no.1 to 4 ch and clicking no. 5 will be no.5 to 8 ch.) In case of over 16 cameras connected, you can switch from no.1 to 16 to no.17 to 32 by clicking the arrow button on the right. 2. TV-Out Panel Shows the current channels sent to TV monitor. Select the channel to view from TV monitor by clicking. Applicable on Sentry 1004 to 3016 models Only the channel checked on "Enable AV-Out" in Camera Setup Mode will be displayed through TV monitor. 3. Alarm Panel Shows alarms connected. Clicking each alarm no. will send alarm out. Monacor international Co., Ltd. 32 3.6 Instant Replay This function enables the playback on one channel selected for the recent time selected while on live mode. 1. Click the camera view that you want to play. 2. Press Instant Replay Button. 3. Then playback for the selected channel will be run in pop-up window on live mode as shown below. 4. To change the previous time of reply (1 to 60min), select from pull-down menu. The change will effect from next run. To view the video in other time, stop playing and select the time in the below list. And press play button again. Previous time for instant replay can be set from Previous Time Selection Bar. The setup will effect when next instant reply run. Monacor international Co., Ltd. 33 3.7 Emergency Recording This function enables the current recording mode to switch to continuous recording and higher frame rate recording while the button is pressed in the emergent case. The default frame rate for emergency recording is 5fps. 1. Emergency Recording Setup should be done first.. 2. You can enter the Setup by moving to "Recording Schedule Setup\Emergency Recording Setup" or right-mouseclicking on Emergency Recording Button. Check on video channels to run emergency recording on and set emergency frame rate each. Or if you want to apply the same frame rate to whole channels, check on "Apply All(fps)", then set frame rate. 3. While in emergency recording mode, the recording will be by the frame rate set from "Emergency Recording Setup" contiously. For stopping emergency recording, press the button again. Monacor international Co., Ltd. 34 3.8 System Lock This function switches to password protection mode after the button is pressed. 1. Press Password Lock Button once. Whole function modes will require password input afterward. 2. In order to enter ID and PW when asked for. One default ID (Administrator, Manager and General) can be chosen from the pull-down list. Or you can write your own ID registered on User Registration Menu. 3. To be released from Password Lock Mode, press the button once again and complete ID and PW confirmation. Monacor international Co., Ltd. 35 3.9 Manual Back-up This function is for manual backup to the specified folder in local hard drive, CD-RW, DVD Writer or CD-Rom. 1. Simply press Manual Back-up Button. 2. Then the below backup program will run. Select the recording files to back up after search. Specify the period / video channles with recordings and click search Automatic search period select To select all files to press Select All To view file, press Preview Click each title in order to sort files by subject. Shows recording files after search. Select the files to back up. 3. Select backup location as below. Monacor international Co., Ltd. 36 Specify the folder in local or network hard to back up recording files. If DVR or CDRW is installed, press DVD or CDRW. Back : start backup procedure AVI Backup : back up selected files to AVI format Concerning backup method to DVD or CD-RW, refer to the CD-RW backup manual: provided seperately. Backup Stop stop backup procedure Exit : exit from Backup know To view backup recording files, use DVSS4Player.exe from C:\DVSS4\Tools. See page 58 toMenu the usage. You can also use separate player installation version to play back-up files from other PC without DVR program. Monacor international Co., Ltd. 37 3.10 E-map This function is to create and view e-map in which locations of the cameras, sensors, and alarms are displayed. Creating E-map 1. Run Edit E-map from Control Setup. Then E-map Editor will run. 2. Right-click on Server icon in Map Tree Bar and select Load Image. 3. Select the image file to be used for E-map (BMP, Jpeg or GIF images can be used). 4. Drag camera, DI and DO icons from Server Tree Bar and drop on the desirous postion in the image. Used icons are displayed with yellow box. Monacor international Co., Ltd. 38 5. Use right-mouse menu on icons on map to rotate cameras, use different type icons, rename or delete icons. 6. Save the changes of the e-map. Monacor international Co., Ltd. 39 Viewing E-map 1. Press E-map from live mode. 2. Then locations of cameras, sensors and alarms are displayed on the map. And motion and sensor events are displayed in red flash. 3. To view the live image, click each camera icon. Or to activate the alarm use right-mouse menu on DO icons. Monacor international Co., Ltd. 40 3.11 Voice Communication While the users monitor the remote DVR from Remote Client Program, they can talk with the personnel at the DVR site through internet using this two-way voice communicaton function. Make sure that your PC speaker and microphone are properly connected to Line-out and MIC port on soundcard. 1. Setup From DVR Server For two-way communication, Voice Network option must be checked on from Network Setup. Enter the name you desire to display in Voice Communication Program. Check on to receive voice data without counterpart's acceptance 2. Setup From Client Side Enter port no. for voice commnication. Default : 8500 The same procedure is required at Client Option Setting from remote client site. 3. Starting Voice Communication Press Voice Communicaton Button to start from DVR Server or Remote Client Program. 4. Sound Hardware Test Wizard If it's the first time for using Voice Communication, Sound Hardwar Test Wizard will start upon pressing the button. 1) Press Next when Sound Hardwar Test Wizard starts. Monacor international Co., Ltd. 41 2) Then Wizard will be testing sound hardware. 3) Test the microphone and speaker volume and press Next when done. 4) To complete, press Finish. Monacor international Co., Ltd. 42 5. Using Voice Communication Program Upon pressing Voice Communication Button from from your side, the below program will appear. Select the connected user. And press button to send your voice to the other side. Send Your Voice Exit Stop Sending Your Volume Level View connected user's information When the other side presses the same button, you can receive the voice from the other side then. The Other Side's Volume Level When "Transmit voice upon 1:1 voice call" option is checked, you can receive the other side's voice upon starting sending voice. Monacor international Co., Ltd. 43 Chapter 4 Search Mode Monacor international Co., Ltd. 44 4.1 Search Mode By clicking search mode button, you shift from display mode to search mode where you can playback the recording images. Default is no image with 4-split mode. Click play button and select your desirous split mode. Event Search Object Search Setup Image Print Image Save POS Search Digital Zoom Bookmark Search Bookmark Add Imave Brightness Image Softness Sound Volume Playback Speed Playback Control Return To Live Mode Video Data Search Search through calendar Search through digital clock Playback Control Video data indicaction by hour Viceo Ch. selection to search. Disabled or enabled by click Recording Type Selection Move frame ahead Play reverse Stop Play Move frame back During playback, all functional buttons are disabled. In order to use other search functions, press Stop. Monacor international Co., Ltd. 45 4.2 Print Images To print the images being displayed, simply press PRINT button. Double-click each image to select the images to print. Set printing options as you like. Then click PRINT utton. 1 2 3 5 4 Image selected 6 7 1. Recording date : shows the date and time of recording image 2. Printer Selection : enables the selection of printer installed on your Windows 3. Copy Count : can select the number of copies that you desire to print 4. Image Border : creates border line of paper used 5. Image Per One Page : specifies the number of images on one page to print 6. Print 7. Exit from the print menu Monacor international Co., Ltd. 46 4.3 Save Images To BMP/JPEG/AVI To save the images being displayed, simply press SAVE button. Double-click each image to select the images to save to BMP/JPEG/AVI. Set the options as you like. Then click SAVE button. 1 2 3 4 Image selected 5 8 6 7 1. Destination : specifies the folder where the files are saved. 2. Format : can select the format of images saved (BMP, JPEG or AVI) 3. Save Info : check to display the image information of the image saved 4. Watermark : check to add digital watermark on the image saved (applied to BMP image only). 5. Move Image : click right or left arrow button to move selected channel to next or previous frame (check on "Move All" to move all channels at the same time). 6. Next Frames: Save next frames to the frame shown with the number set 7. Save 8. Exit from the print menu Monacor international Co., Ltd. 47 4.4 Add To Bookmark / View Bookmark List Add To Bookmark 1. Select the specific camera view and click "Add To Bookmark Button" 2. Enter the remarks in the blank. And clieck "Add". 3. Then the bookmark will be saved on the bookmark list. View Bookmark List 1. Click "View Bookmark List Button" to search and view bookmarks 2. Select specific channel or whole channles, and the period to search bookmarks. 3. Click "Search". Then bookmarks will be listed as shown below. Monacor international Co., Ltd. 48 4. Select one bookmark and click "Go". Then the selected image will be played in one-split mode. To delete the bookmark , select one and press delete button. You can select multiple bookmark by using Ctrl or Shift Key together. To edit the remak of the bookmark, press "Edit" and change the remark. Monacor international Co., Ltd. 49 4.5 Search Setup You can select the recording information to be displayed on playback video. Monacor international Co., Ltd. 50 4.6 Event Search This function allows user to search motion or digital-input event recording on the selected date, 1. Press "Event Search Button" from Search Option Menu. 2. Select the date and the channel to search event. Then select event type (motion or digital-input). 3. Press "Search Event". Then search result will be shown as below. 4. Select one event and press "Play Event" to play on preview screen. Press "Stop Event" to stop playing. Monacor international Co., Ltd.