User manual MOTOROLA H700 BLUETOOTH® HEADSET - H700 MANUAL

motorola H700 Bluetooth Wireless Headset ® H700 Figure 1 3 2 5 1 4 6 1 Figure 2 Figure 3 2 English General and safety information European Union Directives Conformance Statement Hereby, Motorola declares that this product ("H700") is in compliance with: · The essential requirements of European Union Directive 1999/5/EC · All other relevant EU Directives You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte. Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose the product with household waste. Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren't available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region. FCC Notice to Users Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. See-47-CFR-Sec.-15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3). 3 English Initial set up Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola H700 Bluetooth® Hands-free Headset. Before you begin Take a moment to familiarize yourself with your H700 headset. See figure 1 on page 1. 1 Earhook 2 Volume buttons 3 Call button 4 Multicolor indicator light 5 Microphone 6 Headset boom Charging your headset See figure 2 on page 2. First time use: Charge your headset for 2 hours. Recharging: When you hear 5 rapid high tones through the headset speaker repeated at 60-second intervals, the headset battery needs to be recharged. Note: the headset is not functional while charging. The rechargeable battery that powers this product must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods. Never dispose of batteries in fire because they may explode. Wearing the headset You can wear your H700 headset on your left of right ear. The headset comes ready for the right ear. Placing the headset on your ear: refer to figure 3 on page 2. Placing the headset on the left ear · Open the earhook 90° · Detach the earhook from the hinge pin. 4 English Changing volume button orientation If you change your headset to wear it on the other ear, you can also change the orientation of the volume buttons. With the headset off (boom closed), press the Call button until the light turns on. Then, press the Volume button that you would like to assign as "volume up" button. The headset flashes twice and goes back in sleep mode. Turn the headset on (boom opened). Pairing your headset and phone Your phone's Bluetooth feature is off by default. Make sure the Bluetooth feature is permanently turned on in your phone. Please check your phone's user's guide. Before you can use your headset, you must pair (link) it with your phone. 1. With the headset turned off (boom closed), press and hold the Call button for 5 seconds until the indicator light turns on and remain steadily lit in purple. 2. Release the Call button and immediately open the headset boom. The indicator light remains lit in purple. 3. Perform a device discovery (or scan) from the phone. For details about device discovery, consult your phone's user's guide. The phone lists Bluetooth devices it finds. 4. Select Motorola H700 in the list of discovered devices and confirm by following the on-screen prompts. 5. When prompted by the phone, enter the passkey 0000 and confirm. When your headset successfully pairs with your phone, the indicator light changes from steadily to flashing blue. After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset. 5 English SmartFind feature The headset goes automatically in discoverable mode when powered on the first time or in case it can not connect to the device it has been previously paired with. In these instances, the pairing can be done directly on the phone without manually placing the headset in pairing mode. Test and use Your phone and headset are now paired and ready to make and receive calls. To confirm they are successfully paired and operating properly, make a call from you phone. You will hear ringing from the headset. Paired link to additional devices Your headset can store pairing information for up to 8 different devices in chronological order. When an attempt to pair to more than 8 devices is made, the oldest paired device is removed from the list. The headset will automatically initiate a connection with the last device it was connected to either by powering up the headset or by pressing the Call button. If you want to connect the headset to another device in the paired device list, you must initiate the connection from that device. Whichever of the 8 devices initiates a connection to the headset afterwards, that device then becomes the "last connected" device. 6 English Using your headset Turning your headset on & off To turn your headset on, open the headset boom. The indicator flashes blue. To turn your headset off, close the headset boom. The indicator turns off. Making & receiving calls Function Receive a call End a call Reject a call Redial last call Make a voice dial call Transfer a call from the phone to the headset Answer a second incoming call Put active call on hold Toggle between two active calls Join a 3 way call (note: feature is phone/network dependent) Disable the indicator light Mute or un-mute a call Action Open the headset boom and tap the Call button Tap the Call button Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep Tap the Call button and speak the name after the tone Open the headset boom Press and hold the Call button until you hear a beep (The 1st call is placed on hold). Press and hold the Call button until you hear a beep Press and hold both volume buttons Press and hold both volume button for 5 to 6 seconds Tap both Volume buttons Your headset supports both hands-free and headset profiles. Accessing call functions depend upon which profile your phone supports. See your phone's user's guide for more information. 7 English Indicator lights The indicator light provides information about your headset status. With the charger plugged in: Headset indicator Red (steady) Yellow (steady) Green (steady) Headset status Charging (less than 80% charged) Charging (more than 80% charged) Charging complete With no charger plugged in: Headset indicator Off Purple (steady) Red (steady) Blue (10 rapid flashes) Blue (Quick flash) Blue (Slow pulse) Headset status Power off Pairing mode Battery low Pairing successful Standby (not on a call) Connected (on a call) Note: after 5 minutes of inactivity, the light stop flashing to conserve power, but the headset is in standby mode. Any button press on the headset will re-awaken the headset and the flashing resumes. 8 English Audio tones The audio tones provide information about your headset status. Audio tone Single high tone when pressing volume button 5 rapid high tones repeated every 60 seconds No audio indications: deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone 2 ascending tones 2 descending tones Headset status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled Troubleshooting My phone does not find my headset: make sure the blue light on your headset is steadily lit when you phone is searching for devices My headset worked before but now it is not working: Make sure the Bluetooth feature is turned on in your phone. If the Bluetooth feature has been turned off or was turned on temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again. If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.hellomoto.com. 9