Detailed instructions for use are in the User's Guide.
WPS870G
Regulatory, Warranty, and Copyright Information
User Guide
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO ENSURE REGULATORY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES. CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC RF exposure compliance agreements, the separation distance between the antenna and any person's body (including hands, wrists, feet, and ankles) must be at least 8 inches (20 cm). This device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Postpone router installation until there is no risk of thunderstorm or lightning activity in the area. Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the product. Place this equipment in a location that is close enough to an electrical outlet to accommodate the length of the power cord. Place this equipment on a stable surface. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: · · · · Read all of the instructions {listed here and/or in the user manual} before you operate this equipment. Give particular attention to all safety precautions. Retain the instructions for future reference. Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this equipment. Comply with all instructions that accompany this equipment. Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet, and disconnect the cable system. This will prevent damage to the product due to lightning and power surges. Operate this product only from the type of power source indicated on the product's marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating condition.
· ·
It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to avoid damaging the equipment by local lightning strikes and other electrical surges. Different types of cord sets may be used for connections to the main supply circuit. Use only a main line cord that complies with all applicable product safety requirements of the country of use. Installation of this product must be in accordance with national wiring codes. Place unit to allow for easy access when disconnecting the power cord/adapter of the device from the AC wall outlet. Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust. This product was qualified under test conditions that included the use of the supplied cables between system components. To be in compliance with regulations, the user must use these cables and install them properly. Connect the unit to a grounding type AC wall outlet using the power adapter supplied with the unit. Do not cover the device, or block the airflow to the device with any other objects. Keep the device away from excessive heat and humidity and keep the device free from vibration and dust. Installation must at all times conform to local regulations. FCC Compliance Class B Digital Device This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · · Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
User Guide
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
WPS870G
· ·
CAUTION: Changes or modifications not expressly approved by Motorola for compliance could void the user's authority to operate the equipment. FCC Declaration of Conformity Motorola, Inc., Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the WPS870G complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.
Copyright © 2004 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Microsoft, Windows, Windows Me, Windows XP and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft Windows screen shots are used by permission of Microsoft Corporation. AppleTalk and Macintosh are a registered trademarks of Apple Computers, Inc. UNIX is a registered trademark of the Open Group in the United States and other countries. Novell is a registered trademark of Novell, Inc. Wi-Fi is a registered trademark of Wireless Ethernet Compatibility Alliance, Inc. All other product or service names are the property of their respective owners. © Motorola, Inc. 2004.
User Guide
WPS870G
Table of Contents
Section 1: Overview ______________________________________ 1
Features .................................................................................................................................................1 Safety Instructions................................................................................................................................2 Package Contents .................................................................................................................................3 WPS870G Physical Description ...........................................................................................................4 Back of WPS870G ...........................................................................................................................4 Test Print and Restore Button..........................................................................................................5 Front of WPS870G...........................................................................................................................6 LED Indicators .................................................................................................................................6
Section 2: Installation _____________________________________ 8
Overview ................................................................................................................................................8 Before You Begin, a Choice .................................................................................................................8 IP Assignment..................................................................................................................................8 Choosing a Static IP Address ..........................................................................................................9 Hardware Setup...................................................................................................................................10 Wireless Router to WPS870G Connection ....................................................................................10 Computer to WPS870G Connection ..............................................................................................11 Installation Wizard Setup Procedure.................................................................................................12 Installation Notes ...........................................................................................................................12 Wireless Print Server Utility Installation ...........................................................................................18 WPS870G Utility Install for Windows 98SE/Windows ME..............................................................18 WPS870G Utility Installation for Windows 2000.............................................................................22 WPS870G Utility Install for Windows XP........................................................................................26 Existing Printer Driver Configuration................................................................................................30
Section 3: Wireless Security Configuration _________________ 31
Overview ..............................................................................................................................................31 Logging In ......................................................................................................................................31 Wireless Security Setup .................................................................................................................32
Section 4: Web-Based Management ________________________ 34
Overview ..............................................................................................................................................34 Preparation ..........................................................................................................................................34 Network Layout Diagrams..............................................................................................................35 Connecting to the WPS870G..............................................................................................................36 Help, Restart, and Logout ..............................................................................................................37 Status ...................................................................................................................................................38
PAGE i
WPS870G
User Guide
Server Status ................................................................................................................................. 38 Printer Status .................................................................................. ...