® Owner's Manual CD Receiver C 715 DAB SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA 1. Readinstructions- All the safety and operating instructions should be read before the product is operated. 2. Retaininstructions- The safety and operating instructions should be retained for future reference. 3. HeedWarnings- All warnings on the product and in the operating instructions should be adhered to. 4. FollowInstructions- All operating and use instructions should be followed. 5. Cleaning- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Attachments- Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. WaterandMoisture- Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8. Accessories- Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9. Cart- A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10.Ventilation- Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11.PowerSources- This product should be operated only from the type of power source indicated on the marking label and connected to a MAINS socket outlet with a protective earthing connection. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. 12.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 13.MainsPlug- Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 14.OutdoorAntennaGrounding- If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. NOTETOCATVSYSTEMINSTALLER This reminder is provided to call the CATV system installer's attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 15.Lightning- For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 16.PowerLines- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17.Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 18.FlameSources- No naked flame sources, such as lighted candles, should be placed on the product. 19.ObjectandLiquidEntry- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 20.Headphones- Excessive sound pressure form earphones and headphones can cause hearing loss. 21.DamageRequiringService- Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance-this indicates a need for service. 22.ReplacementParts- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. IMPORTANT SAFETY INSTRUCTIONS 23.BatteryDisposal- When disposing of used batteries, please comply with governmental regulations or environmental public instruction's rules that apply in your country or area. 24.SafetyCheck- Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 25.WallorCeilingMounting- The product should be mounted to a wall or ceiling only as recommended by the manufacturer. WARNING The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected · Consult the dealer or an experienced radio/TV technician for help. FCCWARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. INDUSTRYCANADAREQUIREMENT This Class b digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAUTIONREGARDINGPLACEMENT To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) than is equal to, or greater than shown below. left and Right Panels: 10 cm Rear Panel: 10 cm Top Panel: 50 cm WARNING:TOREDUCETHERISKOFFIREORELECTRICSHOCK, DONOTEXPOSETHISAPPARATUSTORAINORMOISTUREAND OBJECTSFILLEDWITHLIQUIDS,SUCHASVASES,SHOULDNOTBE PLACEDONTHISAPPARATUS. ThE APPARATUS ShoUlD bE INSTAllED NEAR To AN EASIly ACCESSIblE SoCkET-oUTlET. CAUTION The C 715 employs a laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in exposure to laser radiation. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when the enclosure is opened. DONOTSTAREINTOBEAM. FCCNOTICE This equipment has been tested and found to comply with the limits for a Class b digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. IMPORTANTINFORMATIONTOUKCUSTOMERS DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. If nonetheless, the mains plug is cut off, REMoVE ThE FUSE and dispose of the PlUG immediately, to avoid possible shock hazard by inadvertent connection to the mains supply. If this product is not provided with a mains plug, or one has to be fitted, then follow the instructions given below: IMPORTANT DO NOT make any connection to the larger terminal which is marked with the letter `E' or by the safety earth symbol or colored GREEN or GREEN AND yElloW. The wires in the mains lead on this product are colored in accordance with the following code: blUE - NEUTRAl bRoWN - lIVE As these colors may not correspond with the colored markings identifying the terminals in your plug, proceed as follows: · The blUE wire must be connected to the terminal marked with the letter `N' or colored blACk. · The bRoWN wire must be connected to the terminal marked with the letter `l' or colored RED · When replacing the fuse, only a correctly rated and approved type should be used, and be sure to re-fit the fuse cover. IFINDOUBTCONSULTACOMPETENTELECTRICIAN. SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA NAD is a trademark of NAD Electronics International, a division of lenbrook Industries limited Copyright 2007, NAD Electronics International, a division of lenbrook Industries limited This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 2004/108/EC. NOTESONENVIRONMENTALPROTECTION At the end of its useful life, this product must not be disposed of with regular household waste but must be returned to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's manual and packaging point this out. The materials can be reused in accordance with their markings. Through re-use, recycling of raw materials, or other forms of recycling of old products, you are making an important contribution to the protection of our environment. your local administrative office can advise you of the responsible waste disposal point. RECORDYOURMODELNUMBER(NOW,WHILEYOUCANSEEIT) The model and serial number of your new C 715 are located on the back of the cabinet. For your future convenience, we suggest that you record these numbers here: Model number : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial number : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTRODUCTION TABLEOFCONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 RDS MoDE oPTIoNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRoGRAM TyPE (PTy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 lISTENING To DAb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 AboUT DAb ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DAb oPERATIoN ...