User manual NAVMAN ICN550 SMART STR2

with SmartTM 2005 Release 2 for iCN 550 iCN 550 User Manual English - Europe iCN 550 | User Manual Contents Box Contents ............................................................................ 5 1. Introduction ........................................................................... 7 2. iCN Features ........................................................................ 8 3. Starting your iCN................................................................. 12 4. Setting your Destination ...................................................... 15 By Address ...................................................................... 18 By POI ............................................................................. 21 5. Using the 2D Map Screen to Plan a Route ......................... 23 6. Multi-stop Trips ................................................................... 24 7. Viewing your Route ............................................................. 29 8. The 2D Map Screen Pop-up Menu..................................... 33 9. Avoiding an Area ................................................................. 34 . 10. Route Demonstrator............................................................ 35 11. Favourites and My Home .................................................... 37 12. Preferences ......................................................................... 42 13. Smart Desktop ................................................................ 55 14. Updating your iCN .............................................................. 57 15. Installing Maps Using Smart Desktop ............................. 58 16. Smart Desktop Advanced Features ................................ 60 17. Accessories ......................................................................... 65 Appendix: Street Types ............................................................. 66 Support Information .................................................................. 69 3 iCN 550 | User Manual Important Safety Information Please Read Carefully Before Installing Product in Vehicle This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. W WARNING CAUTION CAUTION WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. WARNING Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle's safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owner's manual regarding accessories or modifications. Consult your country's and/or state's laws regarding operation of a vehicle with any accessories or modifications. WARNING It is your sole responsibility to place, secure and use the iCN 550 in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. Mount the iCN 550 in a position that is secure and does not obstruct the driver's view. Do not mount the iCN 550 in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety equipment. Do not operate the iCN 550 while driving. Before you use your iCN 550 for the first time, make yourself familiar with your device and its operation. On main roads, the distance to an exit calculated by the iCN 550 may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while your iCN 550 shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs. CAUTION Do not handle the iCN 550 while it is hot. Let the product cool, out of direct sunlight. CAUTION Do not expose the iCN 550 to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit. To discourage theft, do not leave the iCN 550 in plain view in an unattended vehicle. Failure to adhere to these instructions may lead to death, serious injury, or property damage. Navman disclaims all liability for use of the iCN 550 that causes or contributes to death, injury, or property damage or that violates any law. Navman is not responsible for the accuracy of any traffic-related information supplied by other parties and disclaims all liability for any accident, injury or property damage resulting from reliance on such information. 4 iCN 550 | User Manual Getting started Thank you for purchasing your Navman iCN 550. We hope you enjoy your new GPS transferable navigation system. This user manual will help you Drive-AwayTM with your iCN, straight out of the box. Navman welcomes your feedback. To contact us or visit our website, see Support Information on page 69. Box Contents . USB Cable AC Power Pack with Power Cable Note: The number of plugs depends on the country of purchase. Protective Carry-Case Mounting Bracket iCN with GPS Antenna Remote Control 12V In-Vehicle Power Adaptor with Power Cable CD-ROMs, including: · SmartTM 2005 software including Smart Desktop · Map data · User Manual (PDF format) and Adobe® Reader® Note: the number of disks varies with country of purchase. Documentation, including: · User Manual · In-Car Installation Guide · Software Product Licence/ Limited Warranty Agreement · Registration Card 5 iCN 550 | User Manual Getting started 6 iCN 550 | User Manual Getting started 1. Introduction Whether you travel in your own country or elsewhere, your iCN 550 will direct you to your destination without the need for map-books and second-hand instructions. The Global Positioning System (GPS) is available free of charge, at any time, and is accurate to within 5 m (15 ft). The maps on your iCN provide street-level detail for door-to-door navigation, including Points of Interest (POIs) such as accommodation, petrol stations, railway stations and airports. Use this manual to learn how to operate your iCN efficiently and safely; discover all the different features available to you. GPS and GPS Signals The Global Positioning System is a network of satellites that transmit accurate time and position information worldwide. GPS receivers receive signals from these satellites and use the information to determine an exact location. GPS satellites orbit the earth at around 20,200 kilometres (12,000 miles). While a GPS receiver can detect signals from up to 12 satellites at any time, only three signals are needed to provide a position or "GPS fix" (latitude and longitude) for vehicle navigation systems. The iCN GPS antenna receives GPS signals. To receive GPS signals, ensure that the iCN is outdoors, or in a vehicle outdoors, and the GPS antenna has an unobstructed view of the sky. The iCN can operate in all types of weather except snowfall. GPS signals may also be blocked by heat-reflective or heated windscreens. If your vehicle is fittted with such a windscreen, you may need to purchase an external antenna so that your iCN can receive GPS signals. See page 65. 7 iCN 550 | User Manual Getting started 2. iCN Features We recommend that you familiarise yourself with the iCN's basic operations, such as using the stylus, 4-way toggle and Volume control. Front Components Component Description Displays maps and menu options. Tap with the stylus to select menu options or enter information. Displays the Select POI screen, listing the nearest petrol stations to your current position. Displays the Select POI screen, listing the nearest public car parks to your current position. Displays the Main Menu screen. Press and hold to reset the iCN. Cancels an action, returns to the previous screen or deletes the last text character on the Keyboard screen; hold down for longer to delete a whole line at once. Displays a smaller area in greater detail on the Map and 3D Map screens, or press and hold to increase the screen brightness. Amber indicates that the battery is charging; mber Green indicates that the battery is fully charged. Displays a larger area in less detail on the Map and 3D Map screens, or press and hold to decrease the screen brightness. 1 2 3 4 5 6 7 8 Touch Screen Fuel Park Menu ESC + Charge Indicator - 8 iCN 550 | User Manual Getting started Component Description Selects Main Menu options, keyboard characters and preferences, moves around the 2D Map screen to select a destination, and scrolls through lists, such as lists of search results. Press centre to confirm the selected menu option, text or preference; press up or down to adjust the viewing angle on the 3D Map screen. Cycles through the 2D Map, 3D Map, Next Turn and Next 5 turns screens; displays additional preferences or search-result screens, when available. Receives signals from the remote control. 9 4-Way Toggle 10 11 Page Infrared Receiver Side Components Component Description Resets the iCN; press using the stylus. Rotate up or down briefly to hear a sound test; rotate and hold to adjust volume. Connection socket for vehicle power adaptor or AC power pack cable. Connection socket for USB cable to your computer. Slot for memory card. Memory card must be inserted with label facing forward. Connection socket for headphones or earphones (not included). 1 2 3 4 5 6 Reset Volume Control Power Socket USB Socket SD/MMC Slot Headphone Socket 9 iCN 550 | User Manual Getting started Back Components Component Description Must be set to ON for normal use. Switching to OFF will turn the battery off, saving battery power. Outputs voice commands and warnings. Use the Volume control to adjust. Receives signals from GPS satellites when lifted out to the horizontal position. Connection socket for GPS mMCX External Antenna (not included; see page 65). Protected by rubber cover. 1 2 3 4 Battery Switch Speaker GPS Receiver External Antenna Socket Top Components Component Description Turns the iCN on or off. When off, the iCN enters a suspended state. Used to tap the screen to make selections and enter information; Pull out of the slot to use; store in the slot when not using your iCN. 1 2 Power Stylus 10 iCN 550 | User Manual Getting started Stylus The stylus is your input device. Pull the stylus out of the slot and extend it for ease of use. Store it in the slot when not in use. · Tap the screen with the stylus to select. · Tap and drag the screen with the stylus to navigate the 2D Map and 3D Map screens. Internal Battery The iCN has an internal battery that when fully charged should power the iCN for 4 hours. You can monitor battery power at the Power Status screen: Main Menu Preferences More Preferences Hardware Power Status Charging the Battery When the battery is charging, the Charge Indicator is amber; when the battery is fully charged, the Charge Indicator is green. · To charge the iCN in a vehicle, plug the vehicle power adaptor into the Power Socket on the side of the iCN and the other end into the vehicle power socket. · To charge the iCN using an electrical wall outlet, plug the AC power cable into the Power Socket on the side of the iCN and the AC power pack into the wall outlet. 11 iCN 550 | User Manual Getting started 3. Starting your iCN Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you will need to purchase an external antenna for your iCN to receive GPS signals. See page 65. Step One: Position the iCN in your Vehicle Follow the safety notice on page 7 to ensure that the iCN does not obstruct the driver's view, or interfere with the operation of vehicle airbags and safety devices. Position the iCN in your vehicle according to the instructions in your In-Car Installation Guide. The Main Menu screen provides access to all of the iCN's functions, including navigating to a destination. Step Two: Turn iCN On 1. If the Battery Switch is OFF, then remove and use the stylus to switch it ON. 2. Gently pull the bottom of the GPS receiver away from the iCN. The receiver will lift out to a horizontal position, allowing it to obtain a GPS fix. 3. Press . The iCN will turn on. 12 iCN 550 | User Manual Getting started Step Three: Language Screen When you switch your iCN 550 on for the first time, the Language screen will display. 1. Tap your language choice. · To prevent the Language screen from displaying on each startup, select the Do not show on startup check box. 2. Tap to go to the next screen. The Warning screen will display. Step Four: Warning Screen 1. Read the warning message. 2. Tap Accept to confirm that you understand. The first Tutorial screen will display. Tutorial Step Five: Tutorial Screens 1. Read the Tutorial screen. · To prevent the Tutorial from displaying on startup, select the Do not show Tutorial on startup check box. · You can view the Tutorial again while using your iCN. See page 54 for details. 2. Tap to move through each Tutorial screen. The Main Menu screen will display. Main Menu Screen · Use the stylus to select a Main Menu option. · Return to the Main Menu screen at any time by pressing . · The Route Information option is only available when a route has been calculated. See page 32 for more information. 13 iCN 550 | User Manual Getting started To Turn your iCN Off When your iCN is off, it enters a suspended state and the system stops operating. When you turn your iCN on, it returns to the screen you were last viewing. 1. Remove the iCN from the suction-mount bracket if necessary, then gently push the GPS receiver back towards the iCN. The receiver will click into place. 2. Press . The iCN will enter a suspended state and the screen will turn off. Power-Saving Suspended State To save battery power, your iCN will automatically enter a suspended state after a set period of time. You can change the default suspended-state settings at the Power Options screen. Main Menu Preferences More Preferences Hardware Power Options Note: if you are not going to be using the iCN for an extended period of time, switch the Battery Switch to OFF to save battery power. To Reset your iCN Normally you do not need to reset your iCN; however, should your iCN not turn on or not respond, you can reset it to solve the problem. To reset your iCN, either: a. Press and hold . The message Reset Device? will display. Tap Yes. b. Use the stylus to press the Reset button on the top of the iCN. 14 iCN 550 | User Manual Getting started 4. Setting your Destination For your safety, enter destination information before you start a journey. Do not operate the iCN while driving. Select a destination using the Destination, Keyboard and Preview screens, which used together form a destination wizard. This section describes how to use each of these screens and provides two case studies to help guide you through setting your destination. Destination Screen The Destination screen is used to select your destination by area, street, postal code/ZIP code, Point of Interest (POI), intersection, city, town, country or state. As you specify each part of the address, it will display in the You are going to field at the top of the screen. The available options will change to reflect the parts of the address still to be completed. Keyboard Screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. As you select each character, the first two results will display. Tap to see more search results. Search results will be listed in matching order, with the closest matches appearing at the top of the list. If your destination appears in the list at the top of the screen, tap on it to select it. The Keyboard screen can display in three modes: alphabet, alternate and number/symbol. Figure 1. Alphabet Keyboard Figure 2. Alternate Keyboard 15 iCN 550 | User Manual Getting started Figure 3. Number/Symbol Keyboard As you select each character, the first two results will display. Tap to see more search results. · To select a character or a search result, tap the character or search result. · To delete a character, press ESC or tap <<; hold ESC to delete the line. · To display the number/symbol Keyboard screen (Figure 3), tap 123. · To display the alternate Keyboard screen (Figure 2), press +, or tap Alt. · To display the alphabet Keyboard screen (Figure 1), press -, or tap ABC. Preview Screen The Preview screen is used to display a preview of your destination before navigating to it, saving it as a Favourite or displaying it on the 2D Map screen. · To display a smaller area in greater detail (zoom in), press +. · To display a larger area in less detail (zoom out), press -. · To display your destination on the 2D Map screen, tap the preview map. The 2D Map screen will display. · To save your destination as a Favourite, tap Save. The New Favourite screen will display. See Favourites and My Home on page 37. · To calculate the route and open the 3D Map screen, tap Go. The 3D Map screen will display. · To view Point of Interest (POI) details when your destination is a POI, tap The POI Detail screen will display. . 16 iCN 550 | User Manual Getting started Address Search Rules The following rules apply when searching for a destination in Europe: Street Names with Dates If a street name contains a date or a number, search by the first number: Example 1: If searching for "Faubourg du 13 Juillet 1920", search by "13". Example 2: If searching for "Avenue du 14 Avril 1914", search by "14". Example 3: If searching for "Rue de la 1 ere Armée", search by "1". Streets Named After People (excluding Italy) If a street name is a person's name (including at least a first and last name), search by the first name: Example 1: If searching for "Rue Albert Mathieu", search by "Albert". Example 2: If searching for "Fred Archer Way", search by "Fred". Example 3: If searching for "Franz Grillparzer-Strasse", search by "Franz". Street Named After People - Italy In Italy, if a street name is a person's name (including at least a first and last name), search by the last name: Example 1: If searching for "Via de Angelo de Thomasis", search by "Thomasis". Example 2: If searching for "Via Placido Giovanella", search by "Giovanella". Example 3: If searching for "Via della Giacomo Marca", search by "Marca". Postcodes in United Kingdom and Netherlands When searching by postcode in United Kingdom or Netherlands, type the postcode with spaces and without the last two letters. Example 1: If searching for "RH6 9ST", search by "RH6 9". Example 2: If searching for "3514 BN", search by "3514". For exact European street type abbreviations, see Appendix: Street Types on page 66. 17 iCN 550 | User Manual Getting started Setting your Destination by Address Step One: Open the Destination screen a. From the Main Menu, tap Go To. b. From the Go To screen, tap Address or POI. The Destination screen will display. Important Note: The first time you are setting your destination, the Select country screen will display instead of the Destination screen. Go to Step Two: Select the Country of d Destination, step b. The next time you perform this procedure, the Destination screen will open as expected. Step Two: Select the Country of Destination a. From the Destination screen, tap Change country. The Select country screen will display. b. Select a country from the list. The Destination screen will display. Step Three: Find the Area of Destination a. From the Destination screen, tap Find area. The Keyboard screen will display. 18 iCN 550 | User Manual Getting started b. Use the Keyboard screen to find the area of your destination. For information on using the Keyboard screen, see pages 15-16. The Destination screen will display. Step Four: Find the Street of Destination a. From the Destination screen, tap Find street. The Keyboard screen will display. b. Use the Keyboard screen to find the street of your destination. For information on using the Keyboard screen, see pages 15-16. The Destination screen will display. 19 iCN 550 | User Manual Getting started Step Five: Find the House Number of Destination a. From the Destination screen, tap Enter house number. The Keyboard screen will display. Note: If the Enter house number option is not displayed, house numbers are not available for your selected street. Tap Go to centre of street to display the Preview screen. Go to step c. b. Use the Keyboard screen to find the house number of your destination. For information on using the Keyboard screen, see pages 15-16. The Preview screen will display. c. Complete one of the following: · To calculate the route and open the 3D Map screen, tap Go. The 3D Map screen will display. · To display the destination on the 2D Map screen, tap the preview map. The 2D Map screen will display. · To save the destination as a Favourite, tap Save. The New Favourite screen will display. See Favourites and My Home on page 37. · To change your destination, tap ESC. The Destination screen will display. To return to the Main Menu, press . 20