User manual NAVMAN N-SERIES

User Manual with SmartS TM 2006 SE N-Series en English - Australia/Canada/United States © 2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand. Navman is part of the Brunswick Corporation, headquarters Chicago, IL. All rights reserved. The software contains proprietary information of Navman; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Navman. Back-On-Track, Drive-Away, NavPix, Smart and Turn-by-Turn are either registered trademarks or trademarks of Brunswick New Technologies Asia Pte Limited and are used under licence by Navman New Zealand. All rights reserved. Microsoft Windows 2000 SP4 and XP SP2, Microsoft Internet Explorer and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All rights reserved. Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All rights reserved. Location Identifiers © 2005 International Air Transport Association. All other trademarks and registrations are the property of their respective owners. Published in New Zealand. Disclaimer Due to continued product development this information may change without notice. Navman does not warrant that this document is error-free. The screenshots and other presentations shown in this manual may differ from the actual screens and presentations generated by the actual product. All such differences are minor and the actual product will deliver the described functionality as presented in this User Manual in all material respects. Safety Camera POIs Navman products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Navman does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed. Navman does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner. Navman accepts NO liability whatsoever for you receiving any speeding fines or points on your license through using this device. Navman does not guarantee the accuracy of the data contained within this database either expressed or implied. In the event you receive a fine or any other penalty for speeding or contravention of any traffic law, or are involved in an accident, Navman is not responsible for any damages of any type. In some countries the data information regarding safety or speed cameras may conflict with local law and/or regulations. It is your responsibility to make sure that your use of the data is in compliance with local laws and/or regulations. Usage is at your own risk. Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The software is based in part on the work of the Independent JPEG Group. N-Series User Manual Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle's safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owner's manual regarding accessories or modifications. Consult your country's and/or state's laws regarding operation of a vehicle with any accessories or modifications. It is your sole responsibility to place, secure and use the Navman in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. Mount the Navman in a position that is secure and does not obstruct the driver's view. Do not mount the Navman in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety equipment. Do not operate the Navman while driving. Before you use your Navman for the first time, familiarize yourself with your device and its operation. On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while your Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs. The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are responsible for checking that you can legally use the information in your country or in the country where the information will be used. Do not handle the Navman while it is hot. Let the product cool, out of direct sunlight. Do not expose the Navman to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit. To discourage theft, do not leave the Navman, mounting bracket or any cables in plain view in an unattended vehicle. 3 N-Series User Manual AC Adapter-specific safety information To charge your Navman from the mains power, use the AC adapter/AC power pack supplied by Navman as an accessory (may be sold separately). Using other AC adapters with your Navman could result in serious injury or property damage. Never use the adapter if the plug or cord are damaged. Do not expose the adapter to moisture or water. Do not use the adapter in a high moisture environment. Exposure to water may cause electrical sparks or fires. Never touch the adapter when your hands or feet are wet. Allow adequate ventilation around the adapter when using it to operate your Navman or charge the Navman internal battery. Do not cover the adapter with paper or other objects that will reduce ventilation. Do not use the adapter while it is inside a carrying case or other container. Ensure that the adapter is connected to a power source with the correct fitting and voltage requirements. The voltage requirements can be found on the AC adapter casing and/or packaging. Do not attempt to service the adapter as this could result in personal injury. Replace the adapter if it is damaged or exposed to excess moisture. Internal battery-specific safety information The Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water. Only use the correct AC adapter (sold separately) or in-vehicle adapter supplied by Navman to charge the Navman internal battery. Only use the Navman internal battery with the Navman unit. Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the Navman that causes or contributes to death, injury or property damage or that violates any law. 4 N-Series User Manual Contents Important safety information...................................................................................................................3 Welcome................................................................................................................................................7 Box Contents ....................................................................................................................................8 Typographical conventions ...............................................................................................................9 Getting to know your Navman .........................................................................................................10 Front components.......................................................................................................................10 Side components........................................................................................................................11 Back components .......................................................................................................................12 Top components.........................................................................................................................13 Bottom components....................................................................................................................13 Remote Control ..........................................................................................................................14 Volume .......................................................................................................................................15 Internal battery............................................................................................................................16 How do I get started?...........................................................................................................................17 How do I turn my Navman off?........................................................................................................19 What are the main screens I will use?..................................................................................................20 How do I navigate with GPS? ..............................................................................................................21 How do I go from A to B? .....................................................................................................................22 What if I miss a turn? ......................................................................................................................22 How do I navigate to a NavPix photo? ............................................................................................23 How do I navigate to a NavPix photo I have taken or downloaded?............................................24 How do I search for an address? ....................................................................................................25 Case Study: How do I search for an address?...........................................................................25 Using the Keyboard screen ........................................................................................................28 Using the Destination Search screen..........................................................................................28 How do I create a trip with multiple stops? ......................................................................................31 Case Study: How do I navigate to multiple addresses? .............................................................32 How do I skip a waypoint during a multi-stop trip? ......................................................................37 How do I search for a landmark or venue?......................................................................................38 How do I find the nearest gas station?........................................................................................38 How do I find the nearest parking area? .....................................................................................39 How do I search for other POIs?.................................................................................................40 Case Study: How do I search for a Directory Location?.............................................................40 How do I view my route?......................................................................................................................44 3D Map screen ...............................................................................................................................44 2D Map screen ...............................................................................................................................46 Next Turn screen ............................................................................................................................48 Turn-by-TurnTM screen....................................................................................................................50 How do I save Favorites and My Home?..............................................................................................51 How do I save a Favorite? ..............................................................................................................51 How do I navigate to a Favorite?.....................................................................................................52 How do I navigate to My Home? .....................................................................................................53 How do I edit the name of a Favorite? ............................................................................................54 How do I delete a Favorite? ............................................................................................................55 How do I use the camera? ...................................................................................................................56 How do I take a photo? ...................................................................................................................57 Viewfinder screen ...........................................................................................................................58 How do I customize camera preferences?..................................................................................59 How do I manage my photos? ........................................................................................................60 Album management ...................................................................................................................60 Photo management ....................................................................................................................62 How do I navigate to a NavPix photo? ............................................................................................64 How do I navigate to a NavPix photo I have taken or downloaded?............................................65 How do I assign a photo to a Favorite? ...........................................................................................66 5 N-Series User Manual How do I save, e-mail or print photos?............................................................................................67 Via Memory Card........................................................................................................................67 Via NavAlbum.............................................................................................................................67 What else can I do? .............................................................................................................................68 How do I navigate to a recent location? ..........................................................................................69 How do I use the Map Menu? .........................................................................................................70 How do I avoid an area? .................................................................................................................72 How do I preview a route? ..............................................................................................................73 How do I view my route statistics? ..................................................................................................75 How do I view statistics on my current route? .............................................................................75 How do I view statistics of my trips to date?................................................................................76 What is SmartST Desktop?..................................................................................................................77 Can I use Smart Desktop with my computer? ........................................................................78 What is Microsoft ActiveSync®? ..................................................................................................78 How do I install a map for the first time? .....................................................................................78 How do I install Smart Desktop onto my computer? ...................................................................79 Smart Desktop features..............................................................................................................81 Toolbars .....................................................................................................................................83 How do I keep Smart up-to-date?...............................................................................................84 How do I install maps onto my Navman? ........................................................................................85 How do I install maps from CD? .................................................................................................85 How do I know which map contains a particular city or town?.....................................................88 How do I subscribe to Safety Camera information? .............................................................................89 How do I check for special offers? ..............................................................................................90 How do I install Safety Camera information? ..............................................................................91 How do I check for subscription updates? ..................................................................................92 How do I install Custom Points of Interest?.....................................................................................93 How do I create a Custom Point of Interest file? .........................................................................94 How do I copy a Custom POI file to my Navman? ......................................................................95 How do I backup my Navman? .......................................................................................................98 What is NavAlbum? .............................................................................................................................99 NavAlbum features .........................................................................................................................99 Toolbar .....................................................................................................................................100 How do I use NavAlbum?..............................................................................................................101 How do I copy photos or albums from my Navman to my computer? .......................................101 How do I copy photos from my computer to my Navman? ........................................................104 Reference ..........................................................................................................................................106 What can I customize?..................................................................................................................107 Route Preferences....................................................................................................................108 Tutorial .....................................................................................................................................112 System Preferences .................................................................................................................113 Display Preferences .................................................................................................................120 How do I insert a Memory Card?...................................................................................................130 How do I remove a Memory Card? ...........................................................................................130 Street types - US...........................................................................................................................131 Street types - Canada ...................................................................................................................136 Point of Interest categories ...........................................................................................................139 Specifications................................................................................................................................141 Support information............................................................................................................................143 6 N-Series User Manual Welcome Thank you for purchasing your Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use, and will help you Drive-AwayTM with your Navman, straight out of the box. Please read this manual carefully before using your Navman for the first time. Keep this manual available for future reference. In this section Box Contents ......................................................................................................................8 Typographical conventions .................................................................................................9 Getting to know your Navman ............................................................................................10 7 N-Series User Manual Box Contents Item Navman with integrated GPS receiver Item In-vehicle mounting bracket 100/240V AC Mains power-pack for use in your home or office The mains power-pack is not supplied with all models. The number of plugs included depends on the country of purchase. 12V DC In-vehicle power adaptor with power cable USB cable to connect your Navman to your computer, enabling software updates and NavPixTM management Remote Control The remote control is not supplied with all models. Protective carry-case and screencleaning cloth The carry-case and screencleaning cloth are not supplied with all models. CDs containing: Smart 2006 SE software, including Smart Desktop and NavAlbum Map data Adobe Reader ® ® The number of discs included depends on the country of purchase. Documentation including: Quick Reference Manual In-Car Installation Guide GPS Navigation - Frequently Asked Questions guide Documentation including: Global Support Information Software Product License Limited Warranty Agreement Registration card 8 N-Series User Manual Typographical conventions It is important to understand the terms and typographical conventions used in this manual. Formatting The following kinds of formatting in the text identify special information: Convention Bold Italics Type of Information Navman components or items displayed on screen, including buttons, headings, field names and options. Indicates the name of a screen. Icons The following icons are used throughout this manual: Icon Description Note Important note Tip Case study Warning Terms The following terms are used throughout this manual to describe user actions. Term Press Select Tap Tap and hold Description Press and release a button quickly. Tap an item in a list or tap a command from a menu. Press and release an item displayed on the touch screen. Press and hold an item displayed on the touch screen for 2-3 seconds. 9 N-Series User Manual Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Front components Component Battery indicator Description Indicates the level of internal battery charge: Green - battery full Orange - battery charging. Touch screen Displays maps and menu options. Tap to select menu options or enter information. Infrared receiver Receives signals from the remote control. The remote control is not supplied with all models. Displays a list of the nearest gas stations based upon your current location. Displays a list of the nearest parking areas based upon your current location. Displays the Preferences menu screen. Displays the Go To Menu screen. Cycles through the 3D Map, 2D Map, Next Turn and Turn-by-TurnTM screens. 10 N-Series User Manual Side components Component Description Connection socket for GPS MMCX External Antenna (not included). To access the socket, gently lift the rubber cover. Slot for memory card. The memory card must be inserted with the label facing the front of your Navman. Connection socket for the following: USB cable to your computer AC power-pack to the mains power (not included with all models; may be purchased separately) In-vehicle power adaptor to the vehicle power socket. Volume control Press + to hear a sound test and adjust the volume up; press the - to hear a sound test and adjust the volume down. Connection socket for headphones or earphones (not included). To access the socket, gently lift the rubber cover. 11 N-Series User Manual Back components Component Speaker Description Broadcasts voice commands and warnings. Use the Volume control to adjust up or down. Enables you to see what the camera lens sees. You can then take a photo of yourself against the background of your choice. The mirror is only available on models that include a camera. Mirror Camera The camera lens. The camera is not available on all models. 12 N-Series User Manual Top components Component Description Turns the Navman on or off; when off, the Navman enters a suspended state. Turns the camera on. Press to take a photo. The camera is not available on all models. Bottom components Component Hot shoe plate Battery Switch Description Connection plate for the P1 or T1 module (sold separately). Must be set to | (on) for normal use. Switching to o (off) turns the battery off, which saves battery power. 13 N-Series User Manual Remote Control The remote control may be sold separately. Component Description Press twice to cancel the current route. Increases the volume. The on-screen volume bar displays as green and increases as the button is pressed. Decreases the volume. The volume bar displays as green and decreases as the button is pressed. Turns the sound off or on. The volume bar displays as gray to indicate that the volume is muted. Navigate to My Home. Press once to display the My Home screen so that you can navigate home. Press again to calculate the route to My Home and display the map screen. Increases screen brightness. Decreases screen brightness. Cycles through the 3D Map, 2D Map, Next Turn and Turn-by-TurnTM screens. CAUTION Do not expose the remote control to direct sunlight for prolonged periods. Overheating may damage the remote control. CAUTION If you are not going to use the remote control for three months or longer, remove the batteries from the remote control. 14 N-Series User Manual Volume The volume on your Navman can be adjusted either by the volume control on the Navman or by using the volume control buttons on the remote control (may be sold separately). Volume control To hear a sound test and adjust the volume, press the Volume buttons located on the side of the Navman up or down. To mute the volume, press on the remote control (may be sold separately). 15 N-Series User Manual Internal battery Your Navman has an internal battery that, when fully charged, should provide power for up to 4 hours. The battery indicator light on the front of the Navman indicates the level of internal battery charge: Green - battery full Orange - battery charging How do I monitor the battery status? You can monitor battery power status on the Power screen (see "Power" on page 116). How do I charge the internal battery? The Battery Status bar displays External Power while the battery is under charge; when the battery is fully charged, the Battery Status bar will display at 100%. To charge the Navman in a vehicle, plug the vehicle power adaptor into Navman and the other end into the vehicle power socket. on the side of the To charge the Navman using your computer, plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug the small end into on the side of the Navman. To begin charging, ensure your Navman is turned off (press ). To charge the Navman using an electrical wall outlet, plug the AC power cable into on the side of the Navman and the AC power pack into the wall outlet (not included with all models; may be purchased separately). 16 N-Series User Manual How do I get started? Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you will need to purchase an external antenna for your Navman to receive GPS signals. For more information, see the GPS Frequently Asked Questions guide. To get started for the first time, complete the following steps: Step 1 2 3 4 Action Turn your Navman on. Select your preferred language. Read and accept the warning message. View the Tutorial. 1. Turn the Navman on WARNING NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from mounting objects on their windshields while driving. Other Navman mounting options are recommended and an alternative mounting option is included in this box. Navman does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71. a) Position the Navman in your vehicle according to the instructions in the In-Car Installation Guide. Please ensure that: the Navman does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and safety devices. the battery switch is on (|). b) to turn your Navman on. Press The Navman will turn on and display the Language screen. If your Navman was last turned off (o) via the battery switch, it will automatically turn on when the battery switch is switched on (|). 17 N-Series User Manual 2. Select your preferred language From the Select Language screen, tap your preferred language. To prevent the Select Language screen from displaying on each startup, tap the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 117). 3. Accept the warning message a) b) The Warning screen will display when you have selected your preferred language. Read the Warning message. To confirm that you have read and understood the message, tap Accept. The Tutorial will display. If you have maps installed from multiple continents, you may be prompted to select the maps you would like to load after you accept the warning message. To use maps from a different continent at a later time, you can select a different continent via the Change Continent screen in the Map Display preferences. 4. View the Tutorial When you have accepted the Warning message, the Tutorial will display. Read the Tutorial: To prevent the Tutorial from displaying again on startup, tap the Show on start-up check box to clear it. To move forward through the Tutorial screens, tap To revisit the previous screen, tap . . You can view the Tutorial again while using your Navman (see "Tutorial" on page 112). When you have finished the Tutorial, the 3D Map screen will display. If you have a GPS fix, your current location will be displayed on the map. 18 N-Series User Manual How do I turn my Navman off? To turn your Navman off, press . Your Navman will enter a suspended state and the screen will turn off. When you turn your Navman on again, it will return to the screen you were last viewing. Power-saving suspended state To save power, your Navman will automatically enter a suspended state after a pre-determined period of time. You can change the default suspended state setting at the Power preference screen. For more information, see "Power" on page 116. If battery power is very low, your Navman will enter a suspended state whether you have set a predetermined period of time or not. If you are not going to be using your Navman for an extended period of time, switch the battery switch to off (o) to save battery power. 19 N-Series User Manual What are the main screens I will use? Map screens There are four map screens used to view the route to your destination: 3D Map 2D Map Next Turn Turn-by-TurnTM To display the 3D Map screen, or the map screen that you were last viewing, press cycle through the map screens. ; press again to For more information on the map screens, see "How do I view my route?" on page 44. For information on using the Map menu from the 3D Map and 2D Map screens, see "How do I use the Map Menu?" on page 70. Go To Menu screen The Go To Menu screen is your starting point for specifying a destination. From the Go To Menu screen you can navigate to My Home, a Favorite, a recent location, an address, a POI location or a NavPixTM photo. To access the Go To Menu at any time, press icon. ; to select a Go To Menu option, tap the required For information on setting your destination, see "How do I go from A to B?" on page 22. 20 N-Series User Manual How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems. Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength, ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. Your Navman can operate in all weather types except snowfall. You can view your GPS status at any time from the map screens or the camera screens. The GPS displays green when a GPS fix is established and red when a GPS fix is unavailable. To icon indicate the reception strength of a GPS fix, displays between one and four green quadrants. To see your GPS status in more detail, see "GPS Status" on page 115. For more GPS information, see the GPS Navigation - Frequently Asked Questions guide. 21 N-Series User Manual How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, gas stations, railway stations and airports. When you ... want to navigate to a NavPixTM photo location know the address of your destination have multiple stops Then ... use the NavPix Menu to navigate to a preinstalled NavPix photo, or a NavPix photo that you have taken yourself (see "How do I navigate to a NavPix photo?" on page 23). use the address-entry wizard to enter the address (see "How do I search for an address?" on page 25). use the Multi-stop Trip Planner screen to enter multiple waypoints (see "How do I create a trip with multiple stops?" on page 31). need to find a named site, feature, landmark search for a Point of Interest (see "How do I search for a or public venue landmark or venue?" on page 38). need to find a gas station select from a list of the nearest gas stations (see "How do I find the nearest gas station?" on page 38). select from a list of the nearest parking areas to your current location (see "How do I find the nearest parking area?" on page 39). need to find a parking area WARNING For your safety, enter destination information before you start a journey. Do not enter a destination while driving. What if I miss a turn? Back-On-TrackTM Automatic Rerouting You will be redirected if you make a wrong turn. A message informing you that your route is being recalculated will display at the top of the screen. The Information button will display the percentage complete status of the route re-calculation. To cancel a route re-calculation tap . A warning will display, asking you to confirm the cancellation. If confirmed, both the re-calculation and your current route will be cancelled. 22 N-Series User Manual How do I navigate to a NavPix photo? Your Navman contains preinstalled NavPix photos that you can navigate to. Your five most recently used NavPix photos are displayed on the NavPix Menu. If you have not yet navigated to a NavPix photo, five of the preinstalled NavPix photos will display. 1. Tap the photo you want to navigate to. The NavPix Preview screen will display. 2. Tap Go. Your route is calculated; the 3D Map screen will display. 23 N-Series User Manual How do I navigate to a NavPix photo I have taken or downloaded? To navigate to a photo location, a GPS fix must have been available when the photo was taken. 1. From the Album screen, select and tap a photo. The Photo Details screen will display. 2. Tap Go. Your route is calculated; the 3D Map screen will display. 24 N-Series User Manual How do I search for an address? Select a destination using the Destination Search, Keyboard and Destination Preview screens, which used together form an address-entry wizard. This section describes how to use each of these screens and provides a case study to help guide you through setting your destination. In some countries, you can search for your destination by postcode or zip code. If you are in the United Kingdom, and you know the postcode of your destination, you can search for it from the Destination Search screen by tapping Postcode, then entering a postcode of up to eight characters. Quick Steps 1. 2. 3. 4. 5. 6. Open the Destination Search screen Select the country or state Search for the city/area Search for the street Search for the house number Tap Go. Case Study: How do I search for an address? This case study will show you how to set your destination by selecting your country, then state, then town or city, then street, then house number. 1. Open the Destination Search screen The Destination Search screen will display. If this is the first time you are setting your destination and you have maps from more than one country installed, then the Select Country screen will display instead of the Destination Search screen. Go directly to step 2b. The next time you perform this procedure, the Destination Search screen will open as expected. 25 N-Series User Manual 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected. If you only have the map of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap Change Country or State. The Select a Country screen will display. b) Select a country from the list. The Select a State screen will display. If you only have the map of one state installed and selected, that state is selected for your destination by default. Go to step 3. c) From the Select State screen, select a state from the list. The Destination Search screen will display. 26 N-Series User Manual 3. Search for the city/area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display. b) Use the Keyboard screen to search for the city or area of your destination. The Destination Search screen will display. 4. Search for the street a) From the Destination Search screen, tap Street. The Keyboard screen will display. There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names; for example, Main Street, will produce matches that are distinguished by their associated city or area name. 27 N-Series User Manual Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. As you tap each character, the first two matching results will display. Tap to see more search results. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display in three modes: alphabet, alternate and number/symbol. As you select each character, the first two results will display. Tap to see more search results. To select a character or a search result, tap the character or search result. To delete a character, tap . To display the number/symbol Keyboard screen, tap 123. To display the alternate Keyboard screen, tap alt. To display the alphabet Keyboard screen, tap abc. Using the Destination Search screen The Destination Search screen is used to select your destination by area, street, postal or ZIP code, Directory location, intersection, city, town, state or country. As you specify each part of the address, it will display at the top of the screen. The available options will change to reflect the parts of the address still to be completed. 28 N-Series User Manual b) Use the Keyboard screen to search for the street of your destination. Where there are multiple matches, select the city or area that best describes your destination. The Destination Search screen will display. If house numbers and intersection information are not available for your selected street, the Destination Preview screen will display. Go to step 5c. 5. Search for the house number a) From the Destination Search screen, tap House Number. The Keyboard screen will display. If house numbers are available, but not the one that you require, you may have to choose the same street in a neighbouring area. Go to step 4. If the House Number option is not displayed at all, house numbers are not available for your selected section of the street. Tap Go to Centre of Street to display the Destination Preview screen. Go to step c. b) Use the Keyboard screen to search for the house number of your destination. The Destination Preview screen will display. 29 N-Series User Manual c) Complete one of the following: Ensure that the route preferences are applicable for the route that you have specified, before you tap Go. If you want to ... calculate the route and open the 3D Map screen view the position on the map screen add the destination to a multi stop trip save the destination as My Home Then ... tap Go. Your route is calculated; the 3D Map screen will display. tap the map to display the position on the 2D Map screen.. tap Add. The Multi-stop Trip Planner screen will display. tap Save. The New Favorite screen will display. Tap Save as Home. tap Save. The New Favorite screen will display. Tap Save as Favorite. . press The Destination Search screen will display. save the destination as a Favorite change your destination 30 N-Series User Manual How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location from the popup Map menu on the 2D Map or 3D Map screen, then Add to Trip. You can save up to 198 multi-stop trips, each with up to 14 waypoints. Waypoints added, updated or deleted after a multi-stop trip has commenced will not affect the current route. Quick Steps 1. 2. 3. 4. 5. 6. Start your Multi-stop Trip Select the country or state Search for the city/area Search for the street Search for the house number Tap Go. 31 N-Series User Manual Case Study: How do I navigate to multiple addresses? This case study will show you how to set a multi-stop trip by selecting your country, then state, then town or city, then street, then house number for each waypoint. 1. Start your multi-stop trip Multi-stop Trip Planner The Multi-stop Trip Planner screen will display. a) Tap Add. The Add to Trip Menu will display. b) Tap Address. The Destination Search screen will open. You can also add waypoints using Favorites, recent destinations, POI locations and Navpix. 32 N-Series User Manual 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected. If you only have the map of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap Change Country or State. The Select a Country screen will display. b) Select a country from the list. The Select a State screen will display. If you only have the map of one state installed and selected, that state is selected for your destination by default. Go to step 3. c) From the Select State screen, select a state from the list. The Destination Search screen will display. 33 N-Series User Manual 3. Search for the city/area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display. b) Use the Keyboard screen to search for the city or area of your destination. The Destination Search screen will display. 4. Search for the street a) From the Destination Search screen, tap Street. The Keyboard screen will display. 34 N-Series User Manual b) Use the Keyboard screen to search for the street of your destination. The Destination Search screen will display. If house numbers and intersection information are not available for your selected street, the Waypoint Preview screen will display. Go to step 5b. 5. Search for the house number a) From the Destination Search screen, tap House Number. The Keyboard screen will display. If the House Number option is not displayed, house numbers are not available for your selected street. To display the Destination Preview screen, tap Go to centre of street. Go to step c. b) Use the Keyboard screen to search for the house number of your destination. The Waypoint Preview screen will display. 35 N-Series User Manual c) Tap Add. The destination is automatically saved and the Multi-Stop-Trip Planner screen will display. d) Complete one or more of the following: If you want to ... add another waypoint Waypoints added after a multi-stop trip has commenced will not be included in the current route. Then ... tap Add. The Multi-stop Trip Planner screen will display. Return to step 3. calculate the route tap Go. The Multi-stop Trip Preview screen will display. Tap Go. The Map screen will display the calculated route. tap a destination point to move. The Waypoint Preview screen will display. Tap Up or Down. The Multi-stop Trip Planner screen will display. tap Clear. tap a destination point to delete. The Waypoint Preview screen will display. Tap Delete. The Multi-stop Trip Planner screen will display. tap Save. The New Favorite screen will display. Tap Save as Favorite. The Favorite will save. change the order of your waypoints delete all waypoints delete one waypoint save the multi-stop trip as a Favorite 36 N-Series User Manual How do I skip a waypoint during a multistop trip? You can modify a multi-stop trip at any time from the Multi-stop Trip Planner screen, however if you have already commenced a trip, changes will not affect the current route: Multi-stop Trip Planner To skip a waypoint during a multi-stop trip, complete the following: 1. 2. Tap the map to display the cross-hairs. The Map Menu will display. Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint. 37 N-Series User Manual How do I search for a landmark or venue? Setting a Point of Interest (POI) as your destination A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as gas stations, parks, beaches and museums. How do I find the nearest gas station? You can press to quickly find the nearest gas station. Your Navman will show you a list of the nearest gas stations based upon your current location. a) . Press The Select a point of interest screen will display, showing a list of the nearest gas stations based upon your current location. The nearest appears at the top of the list. b) Select a gas station from the list. The Destination Preview screen will display. c) Tap Go. Your route is calculated; the 3D Map screen will display. 38 N-Series User Manual How do I find the nearest parking area? You can press to quickly find the nearest parking area. This case study will show you how to set your destination by locating and selecting a parking area. The Navman will show you a list of the nearest parking areas based upon your current location. a) . Press The Select a point of interest screen will display, showing a list of the nearest parking areas based upon your current location. The nearest appears at the top of the list. b) Select a parking area from the list. The Destination Preview screen will display. c) Tap Go. Your route is calculated; the 3D Map screen will display. 39 N-Series User Manual How do I search for other POIs? Select a POI destination using the Destination Search, Keyboard and Destination Preview screens, which used together form a POI-entry wizard. This section describes how to use each of these screens and provides a case study to help guide you through setting your POI. In some countries, you can search for your destination by postcode or zip code. If you are in the United Kingdom, and you know the postcode of your destination, you can search for it from the Destination Search screen by tapping Postcode, then entering a postcode of up to eight characters. Quick Steps 1. 2. 3. 4. Open the Destination Search screen Select the country or state Select the type of POI Tap Go. Case Study: How do I search for a Directory Location? This case study will show you how to set your destination by selecting a Directory Location. 1. Open the Destination Search screen The Destination Search screen will display. If this is the first time you are setting your destination and you have maps from more than one country installed, then the Select Country screen will display instead of the Destination Search screen. Go directly to step 2b. The next time you perform this procedure, the Destination Search screen will open as expected. 40 N-Series User Manual 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected. If you only have the map of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap Change Country or State. The Select a Country screen will display. b) Select a country from the list. The Select a State screen will display. If you only have the map of one state installed and selected, that state is selected for your destination by default. Go to step 3. c) From the Select State screen, select a state from the list. The Destination Search screen will display. 41 N-Series User Manual 3. Select the type of Directory location To narrow the search for a POI, you can first search by Area or Postcode/ZIP code. a) From the Destination Search screen, tap Point of Interest. The Select POI Category screen will display. b) Select a POI type from the list. The Keyboard screen will display. c) Use the Keyboard screen to find the POI. The Destination Preview screen will display. 42 N-Series User Manual d) Complete one of the following: Ensure that the route preferences are applicable for the route that you have specified, before you tap Go. If you want to ... calculate the route and open the 3D Map screen view the position on the map screen add the destination to a multi stop trip save the destination as My Home Then ... tap Go. Your route is calculated; the 3D Map screen will display. tap the map to display the position on the 2D Map screen.. tap Add. The Multi-stop Trip Planner screen will display. tap Save. The New Favorite screen will display. Tap Save as Home. tap Save. The New Favorite screen will display. Tap Save as Favorite. . press The Destination Search screen will display. save the destination as a Favorite change your destination 43 N-Series User Manual How do I view my route? Once a route has been calculated, the 3D Map screen will display. You will be directed to your destination by vocal and visual instructions. You can view your route in several ways by pressing to cycle through the map screens. 3D Map screen The 3D Map screen is oriented to your travelling direction. To view the 3D Map screen when a route has been calculated, press Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 70). to cycle through the screens. Item Next instruction Direction of next turn Description The direction and name of the street to turn in to. The direction of your next turn. To repeat the voice prompt of your next turn, tap the turn arrow. Distance to next turn Next turn arrow The distance to your next turn. Your next turn is highlighted in a different color from future turns. The default color of your next turn is orange, but will depend on the color theme you are using. Current position Status bar Your current position is marked with Displays one of the following: . The name of the street you are located on Speed warnings Active POIs. 44 N-Series User Manual Item Information Description Displays one of the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint. Route Cancel route Zoom Your current route is highlighted. Cancels your current route. To view zoom options, tap . . To display a smaller area in greater detail, tap To display a larger area in less detail, tap Compass and GPS information Tap to cycle through the options; . Blue compass heading. Green Quadrants - Indicates a valid GPS signal is being used to fix your position. Between one and four quadrants will display indicating the signal strength. Tap and hold to display the GPS Status screen. Red Circle - Indicates no GPS signal. Tap and hold to display the GPS Status screen. 45 N-Series User Manual 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen is displayed Course Up, unless the Map Display preference is set to North. To view the 2D Map screen, press to cycle through the screens. Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 70). Item Next instruction Description The direction and name of the street to turn in to. When you cycle through the Information options, a function description will display briefly at the top of the screen. Direction of next turn The direction of your next turn. To repeat the voice prompt of your next turn, tap the turn arrow. Distance to next turn Current position Route Scale bar Information The distance to your next turn. Your current position is marked with Your current route is highlighted. Displays map scale. Displays one of the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. During a Multi-stop trip, Time to Go, Distance to Go and ETA will appear as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint.