User manual NAVMAN SMARTST 2009 SOFTWARE

S-Series Smart 2009 Software User Manual en English - Australia/New Zealand Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle's safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owner's manual regarding accessories or modifications. Consult your country's and/or state's laws regarding operation of a vehicle with any accessories or modifications. It is your sole responsibility to place, secure and use your Navman in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. Do not mount your Navman in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety equipment. Do not operate your Navman while driving. Before you use your Navman for the first time, familiarize yourself with your device and its operation. On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while the Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs. The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are responsible for checking that you can legally use the information in your country or in the country where the information will be used. Do not handle the Navman while it is hot. Let the product cool, out of direct sunlight. At full power, prolonged listening to the Navman via headphones or earphones can damage the ear of the user. Do not expose the Navman to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit. To discourage theft, do not leave the Navman, mounting bracket or any cables in plain view in an unattended vehicle. Warning Notice to Drivers in the United States State law may prohibit drivers in states such as Arizona, California and Minnesota from mounting objects on their windshields while driving. Please make sure you research and follow your most current State laws. An alternative mounting option is provided in the box with your product; also, stores offer additional mounting alternatives. Navman does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the Navman that causes or contributes to death, injury or property damage or that violates any law. 2 Contents Important safety information...................................................................................................................2 Welcome................................................................................................................................................5 Important information for using the manual .......................................................................................5 Formatting ....................................................................................................................................5 Icons.............................................................................................................................................5 Terms ...........................................................................................................................................5 How do I get started?.............................................................................................................................6 How do I turn my Navman on for the first time? ................................................................................6 Home screen .........................................................................................................................................7 How do I go from A to B? .......................................................................................................................8 What if I miss a turn? ........................................................................................................................8 How do I plan my first trip?................................................................................................................9 How do I view my route?.................................................................................................................10 Using the Keyboard screen.............................................................................................................11 How can I set my keyboard preference?.....................................................................................11 How do I search for an address using the FIND address wizard? ...................................................12 How do I search for a Point of Interest (POI)?.................................................................................14 How do I set my route preferences? ...............................................................................................15 How do I use the Explore map? ......................................................................................................16 How do I explore an area for a POI?...............................................................................................17 How do I explore a map for a POI? .................................................................................................19 How do I set my POI preferences? .................................................................................................20 How do I preview a route? ...................................................................................................................21 How do I view my route statistics? .......................................................................................................22 How do I navigate to a recent place? ...................................................................................................23 My Places ............................................................................................................................................25 How do I save a location as My Place or Home? ............................................................................25 How do I navigate to a location I have saved? ................................................................................26 How do I navigate to Home?...........................................................................................................26 How do I edit the name of a location in My Places? ........................................................................27 How do I delete a Favourite? ..........................................................................................................27 How can I view a POI I have downloaded using NavDesk? ............................................................28 How do I add or edit a POI description? .....................................................................................28 How do I navigate to a NavPix? ...................................................................................................29 How do I navigate to a NavPix in an album? ............................................................................30 NavPix management................................................................................................................31 How do I view a NavPix in full-screen? ....................................................................................32 How do I delete NavPix from an Album?..................................................................................32 How do I save a NavPix under My Places?..............................................................................33 How do I add or edit a NavPix title? .........................................................................................33 How do I capture the GPS co-ordinates of my location? .................................................................34 How do I navigate to a location I have captured? .......................................................................34 What is Connect (Local Search)?.........................................................................................................35 How do I search for a POI using Connect? .....................................................................................35 How do I make a hands-free Call? .......................................................................................................38 How do I pair my Navman with a Bluetooth mobile phone? ............................................................38 Paired phone detail screen .........................................................................................................38 Configuring internet settings .......................................................................................................39 How do I pair my Navman with a Bluetooth headset? .....................................................................39 How do I make a phone call?..........................................................................................................40 How do I receive a phone call? .......................................................................................................41 How do I add a contact to my Navman?..........................................................................................41 How do I search for a contact in my phonebook? .......................................................................41 How do I make a phone call to a contact? ..................................................................................42 3 How do I view my call history? ........................................................................................................43 How do I play media? ..........................................................................................................................44 Playing audio files ...........................................................................................................................44 How do I listen to a music file on my Navman?...........................................................................44 Playing video files ...........................................................................................................................46 How do I view a video file on my Navman?.................................................................................46 How do I view the video file on a full screen? .............................................................................47 FM Radio ........................................................................................................................................48 How do I receive audio through my vehicle speakers?.........................................................................49 How do I set the audio output channel of my Navman through my car's FM radio? ........................49 How do I receive current traffic information? ........................................................................................50 How does my Navman receive traffic information? .........................................................................50 Traffic status...............................................................................................................................50 How will I know when a Traffic Event occurs?.................................................................................51 Traffic Overview screen ..................................................................................................................52 How do I view a list of all events on my route? ...........................................................................53 How do I view traffic details? ......................................................................................................54 How do I know if a detour is recommended? ..............................................................................55 How do I avoid an event on my route?........................................................................................55 How do I cancel a detour around an event on my route?............................................................55 Traffic Messages.............................................................................................................................56 Detour Not Available messages..................................................................................................56 Detour recommended messages................................................................................................56 Traffic preferences ..........................................................................................................................57 TMC service ...............................................................................................................................57 Traffic Event Notification.............................................................................................................57 Select event sorting type ............................................................................................................58 Walking mode ......................................................................................................................................59 How can I set my navigation mode to walking?...............................................................................59 What can I customize?.........................................................................................................................60 Volume ...........................................................................................................................................61 Route options..................................................................................................................................62 Map display.....................................................................................................................................63 Screen brightness ...........................................................................................................................64 Bluetooth ........................................................................................................................................65 Language........................................................................................................................................66 Voice...............................................................................................................................................67 Power management........................................................................................................................68 Connect ..........................................................................................................................................69 Units ...............................................................................................................................................70 Touch audio ....................................................................................................................................71 Audio output....................................................................................................................................72 Delete saved information ................................................................................................................73 Reset GPS......................................................................................................................................74 About ..............................................................................................................................................74 Shop demo .....................................................................................................................................74 Screen saver...................................................................................................................................74 Reference ............................................................................................................................................75 Point of Interest categories .............................................................................................................75 Point of Interest categories by subscription.................................................................................76 My Places categories by Navman...............................................................................................76 Traffic and other TMC Events .........................................................................................................77 For more information.......................................................................................................................78 Online support ............................................................................................................................78 Phone support ............................................................................................................................78 Safety Camera POIs .......................................................................................................................78 Speed Limit.....................................................................................................................................78 Disclaimer .......................................................................................................................................78 Compliance.....................................................................................................................................79 Copyright ........................................................................................................................................79 4 Welcome This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual. Formatting The following formatting in the text identifies special information: Convention Bold Italics Type of Information Navman components or items displayed on screen, including buttons, headings, field names and options. Indicates the name of a screen. Icons The following icons are used throughout this manual: Icon Description Note Tip Warning Terms The following terms are used throughout this manual to describe user actions. Term Tap Tap and hold Select Description Press and release an item displayed on the touch screen. Tap and hold an item displayed on the touch screen for 2-3 seconds. Tap an item in a list or tap a command from a menu. 5 How do I get started? The first time you use your Navman, it may take up several minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD. How do I turn my Navman on for the first time? To get started for the first time, complete the following steps: 1. 2. Read the Important Safety Information on page 2. Position your Navman in your vehicle. Follow the instructions in the Hardware User Manual. CAUTION: Ensure that your Navman does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and safety devices. 3. 4. Turn your Navman on Your Navman will turn on and display the Language screen. Select your preferred language From the Select Language screen, tap your preferred language. To prevent the Select Language screen from displaying on each start-up, tap the Show this screen on start-up option to deselect it. You can change your preferred language while using your Navman, see "Language" on page 65. 5. Read the warning message a) b) 6. The Safety Agreement screen will display after you have selected your preferred language. Read the Safety Agreement message. To confirm that you have read and understood the message, tap Accept. The Tutorial will display. View the Tutorial When you have accepted the Safety Agreement, the first Tutorial screen will display. To skip the Tutorial screens, tap Skip. To move forward through the Tutorial screens, tap Next. To view the previous screen, tap . To prevent the Tutorial from displaying on each start-up, tap the Show on start-up option to deselect it. When you have finished the Tutorial, the Map screen will display. If you have a GPS fix, your current location will be displayed on the map. 6 Home screen The Home screen is your starting point for searching for a destination. The Home screen also allows you to customize your Navman, receive updated traffic information and make and receive phone calls. The Home screen can be accessed from the map screens by tapping on your Navman. Easiest way to set your destination and GO! Search for places, areas and streets to help plan your route. Explore the area around your current position or destination. Search online for live Point of Interest (POI) information. Display the Map screen. Save your important destinations, places, NavPix, etc. Configure your Navman to enhance your navigation experience. Receive live traffic information on your route and set traffic preferences. Use your Navman as a hands-free car kit. Play FM radio or audio and video files and set media preferences. Search for the nearest parking places when travelling. Search for the nearest petrol stations when travelling. Home screen options and the order of the options may differ from the above, depending on your region, maps installed or model of Navman. 7 How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... know the address of your destination need to search for an address need to find a named site, feature, landmark or public venue search for live POI information want to navigate to a NavPixTM location Then ... use the GO address wizard to enter the address. See "How do I plan my first trip?" on page 9. use the FIND address wizard to search for the address. See "How do I search for an address using the FIND address wizard?" on page 12. search for a Point of Interest. See "How do I search for a Point of Interest (POI)?" on page 11. search for a POI using Connect. See "How do I search for a POI using Connect?" on page 35. use the My Places screen to navigate to a NavPix. See "How do I navigate to a NavPix?" on page 29. WARNING: For your safety, enter destination information before you start a journey. Do not enter a destination while driving. What if I miss a turn? Back-On-TrackTM Automatic Rerouting You will be redirected if you make a wrong turn. A message informing you that your route is being re-calculated will display at the top of the screen. To cancel a route re-calculation tap x. A warning will display, asking you to confirm the cancellation. If confirmed, both the re-calculation and your current route will be cancelled. 8 How do I plan my first trip? Using your Navman to plan your first trip is easy. There are several ways to select your destination. Complete the following to navigate to a street address that you know using the GO address wizard. Your Navman will calculate the route from your current location. The Map screen will display. 9 How do I view my route? When a route has been calculated, the Map screen will display. You will be directed to your destination by spoken and visual instructions. Item Direction and distance of next turn Add waypoint to trip Description The direction and distance to your next turn Tap to repeat the vocal instruction. Adds a location as a waypoint on your trip. Tap to remove the waypoint from your trip. Next turn and current route Detour Current position Cancel route Distance and Time Information Your next turn and current route are highlighted. Detours your route to avoid next 1, 2, 5, 10 or 20 kilometres/miles Your current position is marked with Cancels your current route. . Tap to expand and select the following options: Time km/h or mph (speed) and heading TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Pauses your current route. Tap to unpause your current route. To zoom out, tap and hold -. To zoom in, tap and hold +. Mute or unmutes the volume. Pause route Zoom Volume 10 Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing on the screen. A maximum of 99 results will display. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these. To select a character, tap the character. To enter upper case alphabets, tap . To delete a character, tap Tap and hold . to delete the entire text. to select a keyboard screen. To display more characters, tap How can I set my keyboard preference? 1. From the Keyboard screen, tap . The Keyboard preference screen will display. 2. Complete the following: If you want to... use an alphabetic keyboard for entering information use a QWERTY keyboard for entering information use an accented keyboard for entering special character use a symbolic keyboard for entering symbols use a keypad-type keyboard (predictive text) when searching for an address Then... select the Use alphabetic type (a, b, c...) option. select the Use QWERTY option. select the Use accented keyboard option. select the Use symbolic keyboard option. select the Use keypad type (abc, def...) for address searches option. How does predictive text (abc, def...) work? Predictive text allows addresses to be searched by a single key-press for each letter, as opposed to the multiple keypresses. As you enter a letter of an address, your Navman will compare all possible combinations against the maps you have installed and determine which address you intended to type. For example: To enter Sydney, tap PQRS WXYZ DEF MNO DEF WXYZ. Your Navman will compare all possible combinations and display Sydney as a search result. You can add further letters to narrow the search. 11 How do I search for an address using the FIND address wizard? The below address is fictitious and used as an example only. 2 Navman Street Bossley Park Sydney 12 Complete the following: If you want to ... calculate the route and open the Map screen save the recent location as Home Then ... tap GO. The Map screen will display. tap Add to My Places. The Save screen will display. tap Save as Home. tap Add to My Places. The Save screen will display. tap Save as My Place. tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore this area. The Find screen will display. save the recent location as a favourite navigate to a place near the location explore the area near the location 13 How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. Sydney Opera House Macquarie St, Sydney Complete the following: If you want to ... calculate the route and open the Map screen save the recent location as Home Then ... tap GO. The Map screen will display. tap Add to My Places. The Save screen will display. tap Save as Home. tap Add to My Places. The Save screen will display. tap Save as My Place. tap Call. This feature is not available on all models. navigate to a place near the location tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore this area. The Find screen will display. save the recent location as a favourite place a phone call to the POI explore the area near the location 14 How do I set my route preferences? You can enhance your navigation experience by modifying aspects of your route and route calculations. 1. From the GO screen, tap Other options. The Other options screen will display. 2. Complete the following: If you want to... set route type options for your route Then... tap Route type. The Route type screen will display. select your route type preference form the list Selecting Shortest route type over Fastest route type can cause much longer journey time. set types of road options for your route tap Types of road. The Types of road screen will display. select your road preference form the list Avoiding ferry routes may prevent you from navigating between certain countries, even when a bridge or tunnel exists. set your map screen preference set 3D landmarks for your route set Junction views for your route record mileage for your route to generate expense reports record a GPS log of your trip tap the Map option to select between a 3D or 2D view of the Map screen. tap the 3D landmark option to turn it On or Off. tap the Junction views option to turn it On or Off. tap the Mileage recorder option to turn it On or Off. tap the GPS logging option to turn it On or Off. 15 How do I use the Explore map? The Explore map allows you to explore the local area to find Points of Interest (POIs) or navigate to an address. If you do not have a GPS fix, the map will display your last known position. Tap the map to display a POI Burst showing POIs in the surrounding area. Tap a POI icon to show more information and navigate to the POI. Item Angle options Zoom options Rotate options Panning options POI Burst Description Tap to adjust the horizontal viewing angle. To zoom in or out, tap and hold - or +. Tap or tap and hold to rotate the map clockwise or anticlockwise. Tap or tap and hold to pan the map forward, back, left or right. To display a POI Burst, tap an area on the Explore map. Tap an icon or street name in the POI Burst to view information and options. 16 How do I explore an area for a POI? An amusement park near Sydney Opera House, Sydney. 17 Complete the following: If you want to ... calculate the route and open the Map screen save the recent location as Home Then ... tap GO. The Map screen will display. tap Add to My Places. The Save screen will display. tap Save as Home. tap Add to My Places. The Save screen will display. tap Save as My Place. tap Call. This feature is not available on all models. navigate to a place near the location tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. save the recent location as a favourite place a phone call to the POI 18 How do I explore a map for a POI? If you want to ... calculate the route and open the Map screen save the recent location as Home Then ... tap GO. The Map screen will display. tap Add to My Places. The Save screen will display. tap Save as Home. tap Add to My Places. The Save screen will display. tap Save as My Place. tap Call. This feature is not available on all models. save the recent location as a favourite place a phone call to the POI navigate to a place near the location tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. 19 How do I set my POI preferences? Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools. Complete the following: If you want to... display all POI icons (i.e. icons from all categories) display no POI icons show/hide select a specific POI category icon for display on the map screen Your preferences are automatically saved. Then... tap Show all. tap Hide all. tap the required POI category to Show/Hide on the map screen ; repeat until all required categories are selected. 20 How do I preview a route? Route simulation allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview a route: 1. Select a departure point. If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. a) b) c) 2. 3. 4. 5. Tap From. The Leaving from... screen will display. Tap Find a place, then follow the example steps on page 9. Select a destination point using the GO or FIND address wizards, or the Explore map. From the Preview screen, tap GO. Your route is calculated and the Map screen will display. Tap the edge of the docked menu. The GO screen will display. Tap Route simulation. The Map screen will display the calculated route in route simulation mode. From the Go screen, tap Cancel route simulation to cancel your route simulation. 21 How do I view my route statistics? Your Navman provides information on your: distance to go estimated time of arrival distance travelled average speed maximum speed time taken for trip stationary time. To view your route statistics during a planned route: 1. and then tap Tap The GO screen will display. Tap . The Route Statistics screen will display. 2. 22 How do I navigate to a recent place? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent places. 1. Tap Recent places. The Preview screen will display. 2. Tap a recent place. The Preview screen will display. 3. Complete one of the following: If you want to ... calculate the route and open the Map screen save the recent location as Home Then ... tap GO. The Map screen will display. tap Add to My Places. The Save screen will display. tap Save as Home. tap Add to My Places. The Save screen will display. tap Save as My Place. tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. save the recent location as a favourite navigate to a place near the location 23 If you want to ... explore the area near the location Then ... tap Explore this area. The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your location 24 My Places My Places has all your saved and captured locations. It also contains POIs, NavPix and albums you have downloaded onto your Navman via NavDesk. How do I save a location as My Place or Home? Search for an address until the Preview screen is displayed. 1. Tap Add to My Places. The Save screen will display. 2. 3. Tap Save as My Place. The Preview screen will display. To change the name of the favourite, tap the name of the favourite. The Keyboard screen will display. 4. 5. After you have entered a name for the favourite, tap OK. The My Places screen will display. Complete one of the following: If you want to ... navigate to the favourite location navigate to a place near the location Then ... tap GO. The Map screen will display. tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore this area. The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your location delete the favourite location tap Delete. explore the area near the location 25 How do I navigate to a location I have saved? 1. Tap the Favourite destination you want to travel to. The Preview screen will display. 2. Tap Go. Your Navman will calculate the route from your current location. The Map screen will display. How do I navigate to Home? If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard. 1. From the My Places screen, tap Home. The Preview screen will display. 2. Tap GO. Your Navman will calculate the route from your current location. The Map screen will display. 26 How do I edit the name of a location in My Places? 1. From the My Places screen, select a favourite to edit. The Preview screen will display. 2. Tap on the favourite name. The Keyboard screen will display. 3. After you have edited the name, tap OK. The Preview screen will display. How do I delete a Favourite? 1. 2. From the My Places screen, select a favourite to delete. The Preview screen will display. Tap Delete. The favourite is deleted. The My Places screen will display. 27 How can I view a POI I have downloaded using NavDesk? 1. Tap the POI you want to travel to. The Preview screen will display. 2. Complete one of the following: If you want to ... calculate the route and open the Map screen make a phone call to the POI Then ... tap GO. The Map screen will display. tap Call. This feature is not available on all models. navigate to a place near the location tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore this area. The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your location delete a POI from My Places tap Delete. The My Places screen will display. explore the area near the location How do I add or edit a POI description? 1. 2. 3. From the My Places screen, tap a POI you want to edit. The preview screen will display. Tap on the name of the POI to edit its description. The Keyboard screen will display. After you have edited the name, tap OK. The POI preview screen will display. 28 How do I navigate to a NavPix? Pictures that contain GPS co-ordinates are called NavPix and can be used to navigate to the GPS location. To navigate to a NavPix location, either a GPS fix must have been available when the NavPix was taken, or GPS co-ordinates have been added using NavDesk. 1. From the My Places screen, tap the NavPix you want to navigate to. The Preview screen will display. 2. Complete one of the following: If you want to ... calculate the route and open the Map screen navigate to a place near the location Then ... tap GO. The Map screen will display. tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore this area. The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your location delete a POI from My Places tap Delete. The My Places screen will display. explore the area near the location 29 How do I navigate to a NavPix in an album? The albums contain all your photos and displays them as thumbnails. Element Description Displays the previous screen Slide Show Album title Displays all images in the album as a full-screen slideshow. The title of the album. NavPix thumbnail A thumbnail of a NavPix contained in the album. To select a NavPix, tap the thumbnail. The NavPix Details screen will display. Displays if the picture is a NavPix, with embedded GPS co-ordinates. 30 NavPix management The NavPix Details screen displays information about your NavPix. Tap a NavPix to display the Photo Details screen. Element NavPix Title and address GO Description The title of the NavPix and its address. Your route will be calculated and displayed on the Map screen. This button is only available if the NavPix contains GPS co-ordinates. Add to My Places NavPix information Allows you to save the NavPix in My Places. Displays information about the NavPix. This information cannot be edited as it is imported from NavDesk. Pick on map Explore Delete Mode Thumbnail Displays the Pick on map screen. Display the Explore map screen Deletes the NavPix from the album on your Navman or memory card. Toggle between Driving and Walking modes. A thumbnail of the NavPix. 31 How do I view a NavPix in full-screen? 1. From the NavPix Details screen, tap the thumbnail of the NavPix. The NavPix will appear in full-screen. OR From the Album detail screen, tap Slide Show. The NavPix will appear in full-screen 2. 3. The icons disappear after a few seconds; tap the screen to have them reappear. Complete the following: If you want to ... zoom into the NavPix zoom out of the NavPix rotate the NavPix Then ... tap tap . . tap . The NavPix will rotate 90 degrees anticlockwise each time is tapped; the NavPix is saved at the new angle. view parts of the NavPix not displayed onscreen return to the NavPix Details screen scroll through your NavPix tap and hold the NavPix, then drag across the screen. tap tap . . How do I delete NavPix from an Album? NavPix can be deleted from an Album on your Navman internal memory or your memory card. When a NavPix has been saved as a Favourite destination, you will not delete the Favourite if you subsequently remove the NavPix. 1. 2. 3. From the Album screen, tap a NavPix. The NavPix Details screen will display. Tap Delete. A warning screen will display, asking you to confirm or cancel the procedure. If confirmed, the NavPix will be deleted. 32 How do I save a NavPix under My Places? You cannot save a NavPix as a favourite if GPS co-ordinates are not available. 1. From the Album screen, tap a NavPix. The NavPix Details screen will display. 2. Tap Add to My Places. The Save screen will display. 3. Complete the following: If you want to ... save the NavPix as a Favourite (when GPS co-ordinates are associated with a picture) save the NavPix as Home (when GPS co-ordinates are associated with a picture) Then ... tap Save as My Place. The NavPix is saved and the Photo Details screen will display. tap Save as Home. The NavPix is saved and the Photo Details screen will display. How do I add or edit a NavPix title? A title can be added to your NavPix or an existing title can be edited. The title can be a maximum of 34 characters. 1. 2. 3. From the My Places screen, tap a NavPix you want to edit. The preview screen will display. Tap on the name of the NavPix to edit its title. The Keyboard screen will display. After you have edited the title, tap OK. The NavPix Details screen will display. 33 How do I capture the GPS co-ordinates of my location? Your Navman has a capture feature which allows you to record GPS co-ordinates of a location and save them so you can navigate back at a later time. 1. on your Navman. Press You will hear a shutter sound to indicate that the GPS co-ordinates have been saved. The location is saved under My Places. How do I navigate to a location I have captured? 1. From the My Places screen, tap the location you have saved. The Preview screen will display. 2. Complete one of the following: If you want to ... calculate the route and open the Map screen edit the name navigate to a place near the location Then ... tap GO. The Map screen will display. tap the name of your location. The Keyboard screen will display. tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore this area. The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your location explore the area near the location 34 What is Connect (Local Search)? Connect is not available on all models. Connect allows you to search online for live POI information. Using Connect you can search for and navigate to POIs using your Navman or you can navigate to POIs you have downloaded using NavDesk. To search for POIs using your Navman, you must pair your Navman with your mobile phone. If your Navman isn't paired with your mobile phone, the Bluetooth screen will display. For more information on paring, see "How do I pair my Navman with a Bluetooth mobile phone?" on page 38. How do I search for a POI using Connect? 1. Choose one of the following: If you want to... use your current location to search for live POI information Then... tap Near here. The Preview screen will display. Tap Accept. The Available services screen will display. tap Near my destination. The Preview screen will display. Tap Accept. The Available services screen will display. tap Find another place. The Go screen will display. Search for a place and Tap Accept. The Available services screen will display. search for POI information at your destination Note: This option is only available if you have a route planned. search for a new location Depending on the country you are navigating, the available search services may vary. Depending on the service selected you can search for a POI by name or by category. 35 2. Tap and select your preferred search service. The Keyboard screen will display. 3. Use the Keyboard screen to search for a POI, then tap OK. The List of Results screen will display. 4. Select a POI. The Preview screen will display. 5. Complete one of the following: If you want to... calculate the route and open the Map screen place a phone call to the POI navigate to a place near the location Then... tap GO. Your route is calculated; the Map screen will display. tap Call. tap Pick on Map. The Pick on Map screen will display. tap an area and tap OK. The Preview screen will display. tap Explore nearby. The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your location explore the area near the location 36 If you want to... save the destination as a Favourite change your destination Then... tap Add to My Places. The Save screen will display. tap Save as My Place. . press The List of Result screen will display. 37 How do I make a hands-free Call? Hands-free calling is not available on all models. If you have a mobile phone with Bluetooth wireless technology, you can use your Navman as a hands-free car kit or to provide an internet connection. It can also be used to connect to a Bluetooth mono/ stereo earphone to output audio. Models with Bluetooth capabilities can exchange information over a distance of about 10 metres (30 feet) without requiring a physical connection. Before you can use this feature you must pair your mobile phone with your Navman. Ensure that the Bluetooth wireless feature of your mobile phone is turned on before you begin pairing. When you search for or connect to a mobile phone/ headset, the Bluetooth on your Navman will be turned on automatically. To save power, Bluetooth is set to OFF by default. How do I pair my Navman with a Bluetooth mobile phone? 1. 2. 3. 4. From the Settings screen tap Bluetooth. The Bluetooth screen will display. Tap Connect to Phone. The Search screen will display. Tap Search for devices. The Search screen will display a list of nearby Bluetooth devices. Select a device from the list. The Waiting screen will display. If you are prompted for a pass code or device PIN, enter 1234. 5. Tap OK. The Phone detail screen will display. When you pair your mobile phone with your Navman, a connection is established between them. The 12 most recently paired phones will display on the Connect to Phone screen. Paired phone detail screen The Hands free feature on your Navman can be turned ON/OFF. When turned ON the following features can be used: Display caller's number Answer or ignore incoming call Dial a number through the Dial, Phonebook and Call history screens 38 Configuring internet settings The Internet connection when turned on allows you to access live information over the internet. Your mobile phone service provider's default settings will be displayed. When internet settings are not available, a warning message will be displayed. To enter internet settings: Tap any fields to access the keyboard screen to edit the internet configuration. When you enter your password the characters are replaced with * to protect your pass code information. Tap Advanced to set your IP address, DNS and Alt DNS settings. For more information, contact your mobile phone service provider. How do I pair my Navman with a Bluetooth headset? 1. 2. 3. 4. From the Settings screen tap Bluetooth. The Bluetooth screen will display. Tap Connect to headset. The Search screen will display. Tap Search. The Search screen will display a list of nearby Bluetooth devices. Select the headset from the list. The Passcode screen will display. 5. Enter the passcode and tap OK. The Phone menu screen will display. When you pair your headset with your Navman, a connection is established between them. The 12 most recently paired headphones will display on the Connect to headset screen. 39 How do I make a phone call? 1. From the Phone screen tap Dial. The Dial screen will display. 2. Enter the number you want to call. The number of the last call will display when you next access the Dial screen. The number will be cleared as you start entering a new number. 3. To delete the last digit entered, tap To clear the entire number, tap and hold . . International calls require a country code to be included in the phone number. On your Navman, the country code is separated from the rest of the number sequence by a +. If you are making an international call, tap and hold 0 until the + sign displays. 4. Tap to place the call. The Dialling screen will display. When the call is answered, the Call in progress screen will display. 5. Complete the following: If you want to... enter other numbers such as an extension number adjust sound so that the other party cannot hear you Then... tap Keypad. tap tap to mute. to unmute. adjust the volume make and receive calls via your Navman make and receive calls via your mobile phone access the map screen during a call end or cancel the call tap + or - on the volume bar to increase or decrease the volume. tap Voice to device. tap Voice to Phone. tap Minimize. The Map screen will display. To access the Call in progress screen, tap tap Hang Up. on the Map screen. 40 How do I receive a phone call? When you receive a call, the Incoming call screen will display. Tap Answer to answer the call, or Ignore to reject the call. Tap ­ or + to adjust the volume Tap Hang Up to end a call you have answered. How do I add a contact to my Navman? Your Navman uses contacts created on your mobile phone. To add a new contact to your Navman, you must first add it to your mobile phone. Refer to your mobile phone user manual for more information. If there are no contacts on your Navman, you will be prompted to transfer the contact list from your phone. Your phone may disconnect, and then reconnect to your Navman during the transfer. From the Phone screen tap Phonebook. The Phonebook screen will display. To synchronise the contact list with your mobile phone, tap Get Phonebook. Your phone may disconnect, then reconnect to your Navman during the transfer. Contact names will be displayed in alphabetical order. If a contact has one more than one phone number, the numbers will be separated into multiple same name entries each with a different number. Your Navman can store up to 3 paired phones' phonebooks. How do I search for a contact in my phonebook? Your contact names will be displayed in an alphabetical order on your Navman. 1. 2. 3. To search for a contact, tap Search. The keyboard screen will display. Enter your contacts name, then tap OK. The Phonebook results screen will display. Tap a contact from the list. The Dialling screen will display. 41 How do I make a phone call to a contact? 1. From the Phone screen tap Phonebook. The Phonebook screen will display. 2. 3. Select a contact from the list. The Dialling screen will display and once the call is answered the Call in progress screen will display. Complete the following: If you want to... enter other numbers such as an extension number adjust sound so that the other party cannot hear you Then... tap Keypad. tap tap to mute. to unmute. adjust the volume make and receive calls via your Navman make and receive calls via your mobile phone access the map screen during a call end or cancel the call tap + or - on the volume bar to increase or decrease the volume. tap Voice to device. tap Voice to Phone. tap Minimize. The Map screen will display. To access the Call in progress screen, tap tap Hangup. on the Map screen. 42 How do I view my call history? From the Call log screen you can view a list of Incoming Calls, Outgoing Calls and Missed Calls. The call history lists the calls made during the time your Navman is connected to a mobile phone. Numbers are arranged by time with the most recent time at the top. Your Navman can store up to 30 numbers; limited to 10 entries for incoming, outgoing and missed calls each. 1. From the Phone screen tap History. The Phone History screen will display. Icon Description All calls Missed calls Outgoing calls Incoming calls 2. 3. To call a number in your call history, tap a contact from the list. Tap the icon on the top right corner of the Call History screen to sort through Incoming Calls, Outgoing Calls and Missed Calls. 43 How do I play media? Media is not available for all models. Media allows users to play stored video and music files installed on your Navman or on a memory card. It also allows users to play FM radio. Playing audio files If your files are in a storage card, insert the card into your Navman. Only mp3, wma, wav audio formats are supported for the audio feature. You can play music files that are stored on your Navman or on the storage card by a random order, artist and albums. How do I listen to a music file on my Navman? There are several ways to play audio files on your Navman. 1. Choose one of the following: If you want to... play music files randomly sort music files by an artist listen to music files in an album play all music files play music files stores in a playlist Then... tap Play Random. tap Artist and select an artist from the Artist screen. tap Albums and select an album from the Album screen. tap Songs and select a song to start with from the Songs screen. tap Playlists and select a playlist from the Playlist screen. 44 2. The Songs screen will display. 3. Complete the following: If you want to... play a music file listen to the previous music file skip the current music file pause the music file adjust the volume Then... tap on the music file from the list tap tap tap . . . Tap to starting playing the audio file. tap + to increase the volume. tap - to decrease the volume. set play settings in the Play section, tap < or > to see all options: select Random to play music files randomly. select In order to play music files in order. set repeat settings in the Repeat section, tap < or > to see all options: select Repeat All to repeat all the music files. select Repeat One and the current music file will be repeated once. select No Repeat to play the music files only once. 45 Playing video files If your files are in a storage card, insert the card into your Navman. Only mp4, 3gp, m4v, asf, wmv and avi video formats are supported for the audio feature. How do I view a video file on my Navman? 1. From the Media screen tap Videos. The Videos screen will display. 2. Complete the following: If you want to... play a video file view the previous video file Then... tap on the video file from the list tap . Tap and hold the icon for more than 1 second to rewind the video. skip the current video file tap . Tap and hold the icon for more than 1 second to forward the video. pause the video file adjust the volume tap . Tap to starting playing the video file. tap + to increase the volume. tap - to decrease the volume. set play settings in the Play section, tap < or > to see all options: select Random to play video files randomly. select In order to play video files in order. set repeat settings in the Repeat section, tap < or > to see all options: select Repeat All to repeat all the video files. select Repeat One and the current video file will be repeated once. select No Repeat to play the video files only once. 46 How do I view the video file on a full screen? 1. 2. From the Video screen select and tap a video file you want to view on a full screen. The video file will play in a normal view. Tap on the video file. The video file can be viewed at full screen. 3. 4. The icons disappear after a few seconds; tap the screen to have them reappear. Complete the following: If you want to... view the previous video file Then... tap . Tap and hold the icon for more than 1 second to rewind the video. skip the current video file tap . Tap and hold the icon for more than 1 second to forward the video. pause the video file adjust the volume tap . Tap to starting playing the video file. tap + to increase the volume. tap - to decrease the volume. return to the normal view tap . 47 FM Radio 1. From the Media screen tap FM Radio. The FM Radio screen will display. 2. Complete the following: If you want to... search a FM channel Then... tap the frequency bar to select a channel. You can also tap on and to search for the next or previous channel. Tap and hold or for more than 1 second to adjust the frequency by the minimal frequency unit, e.g., 0.1 or 0.05 depending on the country you are in save a channel tap the frequency bar to select a channel. Tap Save to save the channel. The saved channels will be displayed on the FM radio screen. stop the channel delete all saved channels adjust the volume tap . tap Clear All and select Yes on the warning screen. All saved channels will be deleted from the FM radio screen. tap + to increase the volume. tap - to decrease the volume. When you are in Driving mode, FM radio will be disabled. When you are in Walking mode or you do not have a planned route, you will be asked to connect a pair of headphones. When you do not have a route planned and you try to access the FM radio, you will not receive TMC information. 48 How do I receive audio through my vehicle speakers? FM transmitting is not available on all models. Your Navman can be set to transmit sound at a particular FM frequency which you can then receive through your vehicle radio. This means that you can hear map voice guidance, radio, mp3 files and video voice files clearly and loudly through your vehicle speakers. How do I set the audio output channel of my Navman through my car's FM radio? When you first access Audio output, the Internal speaker option is selected by default. If you select FM transmitter the most recently used FM frequency will be used. 1. 2. From the Settings screen tap Audio output. The Audio output screen will display. Select the FM transmitter option and then tap setup to set the frequency. The Set Frequency screen will display. When you select Audio output from Settings on your Navman the following message will be displayed "Do you want to disconnect the Bluetooth Stereo connection." Select Yes to output all sound through FM radio. Select No to output the music/video sound through your Navman and all other sounds through FM radio. 3. Tap Set frequency to set a new output frequency for your Navman. The Set frequency screen will display. 4. Tap ­ or + to set a frequency. Tap and hold -/+ to decrease/increase by 1MHZ. The fine-tuning frequency unit is 0.1MHZ/per unit. 5. Tap any of the save options. The FM screen will display with the saved frequency. You can only save four FM frequencies on your Navman. Tap Apply directly to apply current frequency directly. Apply directly option allows you to set the audio output channel automatically to FM (current frequency). 6. Tap and select the frequency you want to use. To delete a saved frequency, you must set a new frequency and replace the frequency that you no longer require. 49 How do I receive current traffic information? Traffic information is not available on all models and is only available in selected countries. Your Navman can receive current traffic information for all main roads and motorways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location. How does my Navman receive traffic information? You can receive current traffic information on your Navman via the Navman Traffic cradle using the Traffic Message Channel (TMC) service. The traffic cradle may be sold separately. The Traffic Message Channel (TMC) broadcasts real-time traffic and weather information via the FM Radio Data System (RDS). FM radio stations transmit TMC data on a cycle of several minutes, with hundreds of events able to be broadcast to TMC receivers, such as the Navman Traffic module. Traffic status Your current traffic status is indicated by the colour of the TMC icon. To view your current traffic status, from the Home screen, tap The following table describes the three traffic status icons: Traffic Status Description The TMC status is grey if traffic is currently inactive due to one of the following conditions: Your Navman or Traffic module is connecting to the TMC service. Your Navman or Traffic module cannot receive TMC data. This may be due to poor radio coverage in the local vicinity. You are in a country that is not supported by the Navman Traffic module. Tap to display the Traffic Overview screen. The TMC status is orange if one of the following conditions apply: You have navigated into a country that is not supported by Navman Traffic, but there are still traffic events listed on the Event List screen. You have separated your Navman from the Navman Traffic module, or the Navman Traffic module is not receiving power but there are still traffic events listed on the Event List screen. Tap to display the Traffic Overview screen. The TMC status is green if your Navman or Traffic module is active and receiving traffic events. Tap to display the Traffic Overview screen. Your traffic status is displayed in more detail on the Traffic System Status screen. . 50