Issue-1 December, 1998 HYBRID TELEPHONE SYSTEM GROUPHONE INSTRUCTION AND INSTALLATION MANUAL Model 308/824/1232/2464 RECORD OF REVISION Issue No. 1 Date December, 1998 Remarks 1st release for following ROM version: TX-Z 308: 3.0 TX-Z 824: 5.0 TX-Z 1232/2464: 3.0 (CPU-B1) Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and Nitsuko has no obligation to provide any updates or corrections to this manual. Further, Nitsuko also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and Nitsuko shall not be liable for any errors or omissions. In no event shall Nitsuko be liable for any incidental or consequential damages in connection with the use of this manual. No part of this document may be photocopied or reproduced without prior written consent of Nitsuko. (C) 1998 by Nitsuko Corporation. All Rights Reserved. Printed in Japan This manual consists of eight parts: PART 1: INTRODUCTION PART 2: SPECIFICATIONS PART 3: SYSTEM INSTALLATION PART 4: FEATURE DESCRIPTION AND OPERATION PART 5: SYSTEM PROGRAMMING PART 6: PROGRAM RECORD FORM PART 7: OPTIONAL ITEMS (Caller-ID, FAXU, VAU) PART 8: HOW TO USE FOR SINGLE LINE TELEPHONE PART 1 INTRODUCTION The TX-Z 308/824/1232/2464 system is a microprocessor-based, state-of-the-art communications system which offers you superb service, and the flexibility and features which are usually only found on larger, more expensive systems. The TX-Z 308/824/1232/2464 system is designed to give you the best custom-designed services available, making it as easy to use as it is to install. The system can operate by itself or behind a Private Branch Exchange (PBX). The TX-Z 308 system is ideal choice for small or home office. It starts with three lines and eight extensions. TX-Z 824 system can grow in size from the basic four outside lines and eight extensions to eight outside lines and twenty-four extensions. Main Equipment for TX-Z 1232/2464 system is slot type expansion cabinet and expandable using one cabinet. This system can grow in size from twelve outside lines and thirty-two extensions to twentyfour outside lines and sixty-four extensions only adding expansion mother board and power supply unit. With the touch of a few keys, you will have such sophisticated features as Abbreviated Dialing, Repeat Dialing, Conference Call, and Paging etc. at your fingertips. You can also have text message with display phone! The possibilities are almost limitless. The system offers you the flexible assignment of outside lines, and a toll restriction package that can be tailored to suit your needs. Optional equipments (Doorphone, BGM/External MOH input, External Paging output, SMDR I/F, Fax Machine, Voice Mail) can be installed if you desire. Such options are guaranteed to expand and enrich the already wide horizons of your system. One of the excellent points about TX-Z 308/824/1232/2464 system are powerful features provided for single line telephone. Most of features provided for key telephone can be used on single line telephone. Also, you do not need exclusive interface unit to connect single line telephones to TX-Z 308/824/1232/2464 system. It means that you can use the same interface unit as key telephone. This manual will provide you with step-by-step instructions for the installation of the basic equipment, the procedure for customizing your system so that it serves your office or company's particular needs, and the easy, almost effortless instructions for using your telephones. NOTE: Please read through this entire manual at least once before ordering any additional equipment or attempting any installation. PART 2 SPECIFICATIONS General Description System Configuration Visual Indication Audible Indication General Description System Capacity Items System Size Trunk Line Extension Key Telephone Single Line Telephone Intercom Talk Path Paging Path DTMF Receiver Doorphone Interface External Speaker Output External MOH Input PF Transfer Line TX-Z 308 System 308 3 8 Max. 7 (No. 10 to No. 16) Max. 6 (No. 12 to No. 17) 2 1 2 2 1 1 1 (Fixed to CO No. 1 to Ext. No. 17) Items System Size Trunk Line Extension Key Telephone Single Line Telephone DLS Console Intercom Talk Path Paging Path DTMF Receiver Doorphone Interface BGM Input External Speaker Output External MOH Input Ringer Unit PF Transfer Line 2 408 4 8 8 8 TX-Z 824 System 616 6 16 16 16 824 8 24 24 24 Max. 3 (Use DLS console as DSS console.) 6 2 4 2 1 2 1 1 4 6 ¾ 2-1 ¾ General Description System Capacity Items System Size Trunk Line Extension Key Telephone Single Line Telephone DSS Console Intercom Talk Path Paging Path DTMF Receiver Doorphone Interface BGM Input External Speaker Output External MOH Input Ringer Unit PF Transfer Line 1 12 8 2 1 2 1 2 TX-Z 1232/2464 System 1232 12 32 32 32 1 10 2 16 2464 24 64 64 64 2 Note: When one DSS Console is connected, one intercom talk path is occupied. When DSS Console, Paging Path or BGM Input is used, intercom talk path(s) will be used. ¾ 2-2 ¾ General Description Electrical Specifications Station Cable Length Limit Key Telephone Single Line Telephone Doorphone Box * 300 m (0.5 f two-pair twisted cable). 1,125 m (0.5 f one-pair twisted cable). 150 m (0.5 f one-pair twisted cable). Off-premises extension is not allowed. In other words, do not run the wire in outdoor. Power Supplies 308M 90 V AC to 264 V AC, 50/60 Hz. 90 V AC to 134 V AC, 50/60 Hz. 180 V AC to 264 V AC, 50/60 Hz. 90 V AC to 264 V AC, 50/60 Hz. 40 VA maximum. 85 VA maximum. 195 VA maximum. 390 VA maximum. +5 V DC, +6 V DC, +12 V DC, +28 V DC. 824M-100 824M-200 2464M 308 Primary Power Power Consumption Secondary Power 824 1232 2464 External Equipment Specifications Background Music (BGM) /Specifications Input Impedance 600 W Input Level Nominal 250 mV (-10 dBm). Maximum Input 1 Vrms External Music On Hole (MOH) Specifications Input Impedance 600 W Input Level Nominal 250 mV (-10 dBm). Maximum Input 1 Vrms External Paging Speaker Specifications Output Impedance 600 W Output Level Nominal 250 mV (-10 dBm). Maximum Output 400 mV rms ¾ 2-3 ¾ General Description Mechanical specifications Items TX-Z 308 Main Equipment TX-Z 824 TX-Z 1232/2464 Display Type Key Telephone Standard Type Dimensions (W ´ D ´ H mm)/Weights (Kg) 335 ´ 265 ´ 90/1.9 475 ´ 325 ´ 104/5.00 494.6 ´ 362 ´ 230/6.70 221 ´ 170 ´ 88/0.80 (TXD) 216 ´ 177 ´ 81/0.75 (BTXD) 221 ´ 170 ´ 88/0.75 (TD) 216 ´ 177 ´ 81/0.70 (BTD) 221 ´ 170 ´ 63/0.50 (64 D DSS) 216 ´ 177 ´ 59/0.50 (64 BD DSS) 221 ´ 62.5 ´ 63/0.20 (24 DL DLS) 212 ´ 60 ´ 59/0.20 (24 BDL DLS) 132 ´ 100 ´ 35/0.20 DSS Console DLS Console Doorphone Box Environmental Specifications Items System Temperature Humidity Doorphone Environmental Requirements 0 to 45 degree C (32 to 113 degree F). -20 to 60 degree C (-4 to 140 degree F). 10% to 95% noncondensing. ¾ 2-4 ¾ System Configuration (TX-Z 308) Name Description Quantity /System Remarks CPU, Power Supply, battery charger, 3-Trunk/8extension interface, ringer, 1 PF transfer circuit included. NX.E-308M TXZ ME TX-Z 308 Main Equipment 1 NX.E-6TD TXZ KTS 6 Line keys, standard type Key Telephone NX.E-6TXD TXZ KTS 6 Line keys, display type Key Telephone NX.E-12TD TXZ KTS 12 Line keys, standard type Key Telephone NX.E-12TXD TXZ KTS 12 Line keys, display type Key Telephone NX.E-6BTD TXZ KTS 6 Line keys, standard type Key Telephone NX.E-6BTXD TXZ KTS 6 Line keys, display type Key Telephone NX.E-12BTD TXZ KTS 12 Line keys, standard type Key Telephone NX.E-12BTXD TXZ KTS 12 Line keys, display type Key Telephone NX7E-3SMDR-A1 NX7E-3DHEXU-A1 NX7E-3FAXU-A1 NX7E-3CIDU-A1 SMDR interface card Doorphone I/F, relay contacts, EXMOH input, EXP output FAX Transfer /DUD Interface Card Caller-ID Interface Card 1st Model. Modular station cable included. 1 to 7 2nd Model. Modular station cable included. Note 2 Note 2 1 1 1 1 Music source is required for EXMOH. Note 2 Note 2 Complied with Bellcore Spec. NT-S-D6 DX2E-32i/NX7E BATTERY BOX NX.E TXZ W.M.K NX.E TXZ ABB.CARD SET DX.E ABB.CARD SET 2-wire doorphone box External backup battery box Wall-mount bracket Pull-out type abbreviated dial number card (20 pcs) Stand type abbreviated dial number card (20 pcs) 2 1 As needed As needed As needed 1 pce. per key telephone. NP2.6 or equivalent batteries are required. Note 1: The above list shows composition of a system with full capacity. Note 2: A maximum of 2 out of these 4 optional cards can be installed in TX-Z 308 Main Equipment. EXMOH: External Music On Hold EXP: External Paging KTS: Key Telephone Set ME: Main Equipment SMDR: Station Message Detail Recording SLT: Single Line Telephone DUD: Direct Universal Dialing ¾ 2-5 ¾ System Configuration (TX-Z 824) Name NX.E-824M TXZ ME(1) NX.E-824M TXZ ME(2) NX.E-6TD TXZ KTS Description TX-Z 824 Main Equipment for 100V TX-Z 824 Main Equipment for 200V 1 Quantity /System Remarks CPU, Power Supply, battery charger, and 4Trunk/8-extension interface included. 6 Line keys, standard type Key Telephone NX.E-6TXD TXZ KTS 6 Line keys, display type Key Telephone 12 Line keys, standard type Key NX.E-12TD TXZ KTS Telephone NX.E-12TXD TXZ KTS 12 Line keys, display type Key Telephone 6 Line keys, standard type Key NX.E-6BTD TXZ KTS Telephone NX.E-6BTXD TXZ KTS 6 Line keys, display type Key Telephone 12 Line keys, standard type Key NX.E-12BTD TXZ KTS Telephone NX.E-12BTXD TXZ KTS 12 Line keys, display type Key Telephone NX7E-208E-A1 2-Trunk/8-extension card NX7E-008E-A1 8-extension card NX7E-4PFU-A1 NX7E-8DHEXU-A1 NX7E-8RGU-A1 NX7E-8SMDR-A1 NX7E-8SMCID-A1 NX7E-8CID ADAPTOR NX.E-24DL TXZ DLS NX.E-24BDL TXZ DLS NT-S-D6 NVM-2 Model 1 NVM-2 Model 2 NVM-22 Voice Mail I/F DX2E-32i/NX7E BATTERY BOX 4 PF transfer card Doorphone I/F, relay contacts EXMOH/BGM input, EXP output Ringer unit for Single Line Telephone SMDR interface card 1st Model. Modular station cable included. 24 2nd Model. Modular station cable included. 2 1 1 1 4 power failure transfer circuits for SLT. Music sources are required for EXMOH, BGM. 1 pce. for a system when SLT is connected. Needed to use SMDR printer. Needed to use CallerID/SMDR 1 set for 8 Trunk lines Complied with Bellcore Spec. Connected to display type key telephone. 8DHEXU is required. 1 Voice Mail I/F is required for 2 ports. 1 Voice Mail I/F is required for 2 ports. 1 Voice Mail I/F is required per port. Required for VM connection NP2.6 or equivalent batteries are required. 1 Caller-ID/SMDR interface card Caller-ID adapter 24 key DLS Console for 1st Model Key Telephone (used as DSS Console) 24 key DLS Console for 2nd Model Key Telephone (used as DSS Console) 2-wire doorphone box Voice Mail with 2 ports, 2 hour voice storage, 50 mailboxes. Voice Mail with 4 ports, 4 hour voice storage, 50 mailboxes. Voice Mail with 2-4 ports, 25 hour voice storage, 50-100 mailboxes. Voice Mail Interface Unit External backup battery box 1 3 2 As needed As needed As needed As needed 1 ¾ 2-6 ¾ System Configuration (TX-Z 824) Name NX.E TXZ W.M.K NX.E TXZ ABB. CARD SET DX.E ABB. CARD SET Description Wall-mount bracket Pull-out type abbreviated dial number card (20 pcs) Stand type abbreviated dial number card (20 pcs) Quantity Remarks /System As needed As 1 pce. per key telephone. needed As needed NOTE: The above list shows composition of a system with full capacity. ¾ 2-7 ¾ System Configuration (TX-Z 1232/2464) Name Description Quantity /System 1232 2464 Remarks NX.E-2464M TXZ ME NX7E-12MB NX7E-12PS NX7E-24POWU NX7E-24EPMB-A1 NX7E-12PS NX7E-24CPU-B1 TX-Z 1232/2464 Main Equipment Basic mother board Power supply unit DC/DC power supply, battery charger Expansion mother board for 2464 Expansion power supply unit for 2464 System main processing unit 1 1 Factory equipped units 1 1 1 1 BGM and EXMOH input, 2 relay contacts, and CallerID software included. Can not be installed to Slot No.4 and No.8. Daughter board for 24CPU Needed to use Caller-ID 1 set for 8 Trunk lines Complied with Bellcore Spec. 12 power failure transfer circuits for SLT. Common unit with TX-Z 824 NP2.6 or equivalent batteries are required. 24DHU is required. 1 Voice Mail I/F is required for 2 ports. 1 Voice Mail I/F is required for 2 ports. 1 Voice Mail I/F is required per port. Required for VM connection Connected to display type Key Telephone NX7E-408U-A1 NX7E-008U-A1 NX7E-24DHU-A1 NX7E-24SMDR-A1 NX7E-24SMCID-A1 NX7E-8CID Adapter 4-Trunk/8-extension card 8-extension card 2-doorphone I/F card SMDR interface card Caller-ID/SMDR interface card Caller-ID adapter 4 1 1 8 1 1 2 3 NX7E-12PFU-A1 NX7E-24VAU-A1 NX7E-8RGU-A1 DX2E-32i/NX7E BATTERY BOX NT-S-D6 NVM-2 Model 1 NVM-2 Model 2 NVM-22 Voice Mail I/F NX.E-24DL TXZ DLS NX.E-24 ...