Detailed instructions for use are in the User's Guide.
User's Manual MultiSync LCD1770GX
Index
Warning .................................................................................................................... 1 Contents ................................................................................................................. 2 Display Setup ......................................................................................................... 3 Mounting ................................................................................................................. 7 Flexible Arm Installation .................................................................................... 8 Controls .................................................................................................................. 9 Recommended Use ............................................................................................... 12 Specifications ....................................................................................................... 15 Features ................................................................................................................. 16 Troubleshooting ................................................................................................... 17 References .............................................................................................................18 Limited Warranty ................................................................................................. 19 TCO'99 .................................................................................................................... 20 Manufacturer's Recycling and Energy Information ................................... 22 Avertissement ..................................................................................................... 24 Contenu ................................................................................................................. 25 Configuration de I'affichage ............................................................................ 26 Montage ................................................................................................................ 30 Installation du bras flexible ............................................................................ 31 Commandes .......................................................................................................... 33 Usage recommandé ............................................................................................ 35 Fiche technique ................................................................................................... 38 Fonctions .............................................................................................................. 39 Dépannage ............................................................................................................ 40 Références ........................................................................................................... 41 Garantie limitée .................................................................................................. 42 TCO'99 .................................................................................................................... 43 Informations du fabricant relatives au recylage et aux économies d'énergie ...... 45
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1. Use the attached specified cables with the MultiSync® LCD1770GXTM (L174F) color monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use the supplied shielded video signal cable. Please use the supplied USB cable with ferrite cores. Use of other cables and adapters may cause interference with radio and television reception. 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult your dealer or an experienced radio/TV technician for help. If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4. 1
LCD1770GXManual011305.pmd
1
1/14/05, 5:04 PM
Contents
Your new NEC MultiSync® LCD monitor box* should contain the following:
· MultiSync LCD1770GX monitor with height adjustable stand · Power Cord · USB Cable · User's Manual · Cable Management Cover
· Video Signal Cable (mini D-SUB 15 pin to mini D-SUB 15 pin) · Video Signal Cable (DVI-D to DVI-D)
Cable Management Cover
Power Cord
Mini D-SUB Cable
User's Manual MultiSync LCD1770GX
USB Cable
DVI-D Cable
User's Manual
* Remember to save your original box and packing material to transport or ship the monitor.
2
LCD1770GXManual011305.pmd
2
1/14/05, 5:04 PM
Display Setup
To attach the MultiSync® LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output : Connect the DVI signal cable to the connector of the display card in your system (Figure 1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure 2). Tighten all screws. For MAC setup: Connect the Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure 3). Tighten all screws. NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662. 3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position (Figure 4). 4. Connect all cables to the appropriate connectors (Figure 4). NOTE: If connecting both DVI and D-sub cable, the DVI cable must be connected along side of the rib on the power cord side (Figure 4). 5. For successful cable management, it is suggested that the cables be placed in this order: power cable and DVI cable (Figure 5). 6. Place DVI cable and power cable into the specific hooks indicated in (Figure 6). 7. Place the D-Sub and the USB cable into the specific hooks indicated in (Figure 7). 8. Make sure all cables are resting flat against the stand (Figure 7). 9. Hold all cables firmly and place the cable cover onto the stand (Figure 8). To remove the cable cover, lift the cover off as shown in (Figure 9). 10. Connect the power cord to the power outlet (Figure 11). NOTE: If you have difficulty removing the cable cover, please push the notch at the bottom of the cover up (towards the top of the monitor)in order to unhook the cover from the stand. (Figure 10). NOTE: If you use this monitor at AC125-240V, please refer to Recommended Use section of this manual for proper selection of power cord. 11. The vacation switch on the back side of the monitor must be turned on (Figure 11). Turn on the monitor with the front power button and power on the computer. NOTE: The vacation switch is a true on/off switch. If this switch is in the OFF position, the monitor cannot be turned on using the front button. DO NOT switch on/off repeatedly. 12. Analog input only: No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup most of the time. For further adjustments, use the following OSM® controls: · Auto Adjust Contrast · Auto Adjust Refer to the Controls section of this User 's Manual for a full description of these OSM controls. NOTE: For download information on the Windows® 95/98/Me/2000/XP INF file for your monitor, refer to the References section of this User's Manual. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. 3
LCD1770GXManual011305.pmd
3
1/14/05, 5:04 PM
Display Setup Âcontinued
Figure 1 Figure 2 Figure 3
DVI Signal Cable
Macintosh Cable Adapter (not included)
Note: Some Macintosh systems do not require a Macintosh Cable Adapter
30° Tilt
Figure 4
Figure 5
DVI Cable (Top)
Highest Stand Position
Power Cable (Bottom)
DVI Cable
Input2(D-Sub) USB
Input1(DVI) Power cord
DC-OUT
NEC optional product atttachment. Do not use this connector unless specified.
Figure 6
D-SUB Cable USB Cable
4
LCD1770GXManual011305.pmd
4
1/14/05, 5:04 PM
Display Setup Âcontinued
Figure 7
Figure 8
Figure 9
Figure 11
Figure 10
Vacation Switch
OFF Position
Power Button
ON Position
5
LCD1770GXManual011305.pmd
5
1/14/05, 5:04 PM
Display Setup Âcontinued
Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen.
Figure RL.1
Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). NOTE: Handle with care when tilting and swiveling the monitor screen.
Figure TS.1
6
LCD1770GXManual011305.pmd
6
1/14/05, 5:04 PM
Mounting
Remove Monitor Stand for Mounting To prepare the monitor for an alternate mounting method: 1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure M.1). NOTE: If you have difficulty removing the cable cover, please push the the notch at the bottom of the cover up (towards the top of the monitor)in order to unhook the cover from the stand, as shown in the following figure. Figure 2. Disconnect all cables. 3. Place monitor face down on a non-abrasive surface (Figure M.2). NOTE: Handle with care when the monitor is facing down to avoid damaging the front buttons. 4. Remove the 2 screws connecting the stand to the monitor (Figure M.2). 5. Lift up the stand to unlatch the upper hooks and remove the stand (Figure M.3). 6. Remove the 2 screws on the top of the monitor (Figure M.4). The monitor is now ready for mounting in an alternate manner. 7. Connect the cables to the back of the monitor. 8. Reverse this process to reattach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing stand.
Figure M.1 Figure M.2
Figure M.3
Figure M.4
7
LCD1770GXManual011305.pmd
7
1/14/05, 5:04 PM
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal attach the a ...
