NEC PLASMA TABLE TOP STAND CONTENTS: - NEC Table Top Stand REQUIRED TOOLS: - Six crosshead screws (Please unscrew from NEC Plasma, see "reference") - Cross point screwdriver INSTRUCTIONS Step 1. Open packaging Step 2. Put stand on a table Step 3. Carefully place the NEC Plasma on a flat soft surface Reference 2x3 screws for the stand assembly Step 4. Remove the screws with the cross point screwdriver Step 5. Slide the support brackets into the base Step 6. Secure the stand with the six screws Step 7. With assistance, carry the entire unit to the desired location and divert the protective foil from the stand 2951-4042-C001 Rev.00 ...