Notice This manual contains information protected by copyright law. All rights are reserved. No part of this document may be used or reproduced in any form or by any means, or stored in a database/retrieval system without prior written permission from Neonumeric. Neonumeric provides the repair service during warranty period in promised support range. This product is not guaranteed for its compatibility with all kinds of computers and Operating System. Neonumeric is not responsible for any loss arising out of using this product. Neeonumeric reserves the rights to update user's manual based on the application upgrade without prior notice. All changes will be put into the new edition manual. Please visit website http://www.neonumeric.com to download the latest user's manual. NTG-1 Remarks 1) Storage A) B) C) Please avoid placing NTG-1 directly in the sunshine or dusty place. Please avoid dropping or impact upon NTG-1. Don't let liquid or objects into NTG-1. Don't use chemicals, such as gasoline or other diluents, upon NTG-1 surface. Wipe the NTG-1 with a dry, soft cloth to keep in clean condition. Please disconnect NTG-1 from the computer before maintenances or cleaning. When start using the unit, please fully charge and discharge the battery for about 2 ~ 3 times to ensure maximum battery life and power capacity. Please don't dispose the unit into fire to avoid the battery exploding. Please don't disassemble any part of the unit, any unauthorized disassembling will cause termination of Neonumeric official warranty. Please don't use wet hand to plug/unplug or contact NTG-1 for 2) Cleanup A) B) C) 3) Battery A) B) C) 4) Usage A) B) D) E) preventing shock or damage. Please don't unplug NTG-1 while data is transferring with the computer, otherwise the data may be lost. Please don't judder, otherwise NTG-1 may be damaged. Please ensure that NTG-1 has enough space to save the new recorded files. The folders named as "MP3", "TXT", "DCIM" and "100MEDIA" which are auto-generated default folders for saving music, ebook and video/ picture files. Please saving different kinds of files into correct folders, otherwise NTG-1 couldn't recognize. Video/picture files are saved in "100MEDIA" folder under "DCIM" folder. REC*****.ASF, REC*****.JPG, and REC*****.WAV are auto-generated default titles for video recorded files, photos and MIC recorded files. «****»Presents numbers as 0~9. Files or data stored in NTG-1 cannot completely avoid being destroyed or lost due to improper use or other reasons. Please backup files and data when necessary. 5) Others A) B) C) NTG-1 Catalog Listing Introduction ............................................................................................. 1 Features ........................................................................................... 1 Package Checklist ............................................................................ 2 Functions and Buttons ...................................................................... 3 ................................................................................................................ Usage on the Computer .......................................................................... 5 Utilities Installation ............................................................................ 5 Data Transferring .............................................................................. 7 Disconnecting ................................................................................... 9 Basic Operations ..................................................................................... 10 Battery .............................................................................................. 10 Power On/Off .................................................................................... 11 SD/MMC Card .................................................................................. 11 HOLD ............................................................................................... 12 Reset ................................................................................................ 13 Firmware Upgrade ............................................................................ 13 Mode Operations.................................................................................... 16 Video ............................................................................................... 16 Audio ............................................................................................... 20 Photo ............................................................................................... 25 Rec .................................................................................................. 29 Accessory ........................................................................................ 31 E-Book ............................................................................................ 34 Camera ........................................................................................... 37 Dv .................................................................................................... 40 Setup ............................................................................................... 42 Specifications ......................................................................................... 51 FAQ ........................................................................................................ 53 Contact ................................................................................................... 55 NTG-1 Introduction Thanks for purchasing Neonumeric NTG-1. NTG-1 is a new type of portable media player, which perfectly combines digital movie & music Playing, Photo browse, game, eBook, FM Out, video recording and MIC recording etc. Features A) B) B) C) D) E) F) G) H) I) J) K) L) M) N) O) P) Support FM transmission Support movie files as ASF 130K pixels camera lens Support MP3 and WAV music files Support multiple sound modes and playback modes Lyric (LRC file) displays synchronously Support photo browse Support game function Support eBook browse Support Video and MIC recording Support calendar browse Built-in loudspeaker Support SD/MMC Card User-defined power off Effectively prevent misoperation with HOLD switch No driver installation required (except on Windows 98/98SE) Firmware update 1 Package Checklist Please check that you have all of the following items. If any items are missing, contact vendor who selling it to you for help. Functions and Buttons NTG-1 User's Manual Adapter USB Cable AV Cable Earphones Carrying Case Car Adapter (*Optional) 2 Installation CD NTG-1 Top 1 2 3 4 5 6 7 Front 8 12 9 10 1. Volume- Button 5. Earphone Jack 9. OK Button 2. Volume+ Button 6. MIC 10. Next Button 3. AV OUT Jack 7. BACK Button 11. MENU Button 11 4. AV IN Jack 8. Previous Button 12. Speaker 3 Bottom 13 14 Left Right 15 16 17 18 13. Mini USB Port 14. SD/MMC Card Slot 15. RESET Hole 16. Adapter Jack 17. LED 18. HOLD Switch Back 19. Photographic Lens 4 NTG-1 Usage on the Computer Connect NTG-1 with the computer through USB cable, Connect standard port of USB cable with the computer, Mini port with NTG-1. After being connected, the screen of NTG-1 would displayed as following: Fig. 1 Utilities Installation Please install driver before using NTG-1, if your system has not installed it previously on Windows 98/98SE. The installation steps are as the following: 1) Boot your system on Windows 98/98SE. 2) Insert the Installation CD into CD-ROM. 3) Connect NTG-1 with the computer through USB cable, system would find 5 4) an USB device automatically. "Add New Hardware Wizard" dialog would appear, click "Next" button to continue. Please select "Search for the best driver for your device. (Recommended)", and click "Next" button to continue. 5) Wizard shows where to locate NTG-1 driver. Only select "CD-ROM". Click "Next" button to continue. 6 NTG-1 6) Please click "Next" button in the following steps and click "Finish" button in the last step to finish the installation. Data Transferring Boot your computer, connect NTG-1 with the computer. The screen of NTG-1 would display as "Fig. 1" to prompt the connection status after been connecting. Windows 98/98SE/Me/2000/XP: Double click "My Computer", you would find two new icons named "Removable Disk", and the first icon represents NTG-1, the second icon represents SD/MMC Card. 1) 2) 7 Mac OS 9.0 or above (Mac OS 10.3.2 e.g.): You would find two new icons named "NO_NAME" that would appear on the desktop of your computer, and the first icon represents NTG-1, the second icon represents SD/MMC Card. NOTE: Under the system of Mac OS 10.0 or above, only one disk letter would appear, although SD/MMC Card is plugged into NTG-1. 3) Then you can copy, delete or edit data, just as on a traditional hard disk. Disconnecting 1) Windows 98/98SE: Unplug NTG-1 from USB port of the computer after stop 8 NTG-1 2) transferring. Windows Me/2000/XP (Windows 2000 e.g.): Click the icon at the taskbar, then click the "Stop USB Mass Storage Device - Driver", and click "OK" button in the popup window "The `USB Mass Storage Device' device can now be safely removed from the system", then you can unplug NTG-1 from the computer safely. Mac OS 9.0 or above (Mac OS 10.3.2 e.g.): Select the icon(s) representing NTG-1, and click "File" to select "Exit NO NAME" or "Exit" (if SD/MMC card is plugged into NTG-1), then you can disconnect NTG-1 from the computer. 3) Tips: Please drag NTG-1 icon into Trash, then unplug it on Mac OS 9.0 or above. 9 Basic Operations Battery : The battery does full. : The battery does exhausted. This icon would flash when the battery does extremely low. NTG-1 powered by lithium battery. Please connect NTG-1 to adapter for charging, or connect car adapter with cigar-lighter adapter of car to charge for the battery. When the battery is charging, the LED is red, and green represents finished charge. Please connect the car adapter to cigar-lighter adapter of car, please refer to the Cigar-lighter adapter of car 10 NTG-1 figure. Neonumeric. is not responsible for any loss arising out of using this cigarlighter adapter of car. Power On/Off To power on NTG-1, please hold OK button, NTG-1 would enter main menu automatically. To power off NTG-1, please hold OK button. When NTG-1 is in non playing/playing pause/recording/playing game/photograph/ USB modes, NTG-1 would power off automatically if you set "POWER OFF" in "Setup" and there is no operation during the time (Please refer to "Setup" for details). SD/MMC Card Before powering on NTG-1 or when NTG-1 is in main menu, open the slot convert and insert the SD/MMC Card into NTG-1. After being inserted the SD/MMC Card, an icon ( ) would appear on the the screen. 11 SD/MMC Card Slot Please refer to "Mode Operations" for details. NOTE: Please save different kinds of files into different folders, please refer to "Remarks -> Others -> A" for details. HOLD This function is used to prevent the buttons from being operated accidentally. To lock all buttons please simply lock HOLD switch, a lock icon would appear on the screen, and no button would be able to operate. To release the lock status, please unlock HOLD switch. If try to power on while HOLD switch is locked, NTG-1 can't be power on, please unlock HOLD switch, then try again. 12 NTG-1 Reset Push In case NTG-1 doesn't response to any operation, poke the RESET hole to reboot system. You need to restart NTG-1 after rebooting. Firmware Upgrade Before upgrade, you need to instal NTG-1 camera driver first, please refer to Camera for details. NOTE: Please make sure the free space of NTG-1 is more than 20MB, otherwise the upgrade would be fail. Please backup files first because 13 the upgrading would delete all of files which saved in NTG-1. After having installed camera driver, please refer to the following steps to upgrade. 1) Download the latest firmware files from the website http://www.neonumeric.com. 2) Enter Setup menu, set the item of STORAGE as PC-DEVICE press OK button to confirm. Then connect NTG-1 with the computer through USB cable. 3) Insert the installation CD into CD-ROM. 4) Double click the ISP_V5.2.exe under ISP folder, system would prompt a popup window. 5) Select Normal and then click ISP button in the window. 6) System would popup a dialogue box, select the files which you have download, click Yes button in the popup window, system would 14 NTG-1 7) upgrade firmware of your NTG-1 automatically. After finishing upgrade, ISP Write File OK. would appear in the window, waiting for about 30 seconds, then unplug NTG-1 from the computer safely. NTG-1 would run new firmware program when powering on again. 15 Mode Operations There are 9 menus in main menu: Video, Audio, Photo, Rec, Accessory, E-Book, Camera, DV and Setu ...