NETGEAR ProSafe VPN Client Quick Installation Guide NETGEARTM ProSafe VPN Client version 10.1.1 (Build 10) Quick Installation Guide This CD contains the NETGEAR ProSafe VPN client product. System Requirements q IBM-compatible computer with Pentium processor or equivalent (not Alpha platforms) Compatible operating systems with minimum RAM: Operating system Microsoft® Windows® 95 Windows 98 and Windows NT® Workstation 4.0 Windows Me and 2000 Professional Windows XP Home and Professional Minimum RAM 16 MB 32 MB 64 MB 64 MB; 128 MB recommended q q 10 MB hard disk space Native Microsoft TCP/IP communications protocol For dial-up connections: s q q Non-encrypting modem q s Native Microsoft PPP dialer For network connections, Ethernet card and connection q Microsoft Internet Explorer 4.0 or later file:///C|/cdimagetools/vpnClient/html/QuickInstall.htm (1 of 3)11/19/2003 11:59:43 PM NETGEAR ProSafe VPN Client Quick Installation Guide Installing Before installing the NETGEAR ProSafe VPN Client software, read this document for technical issues concerning this release. 1. If you're installing this product on Windows NT or Windows 2000 or XP, log on as administrator or its equivalent. 2. Run the setup.exe file on the installation CD-ROM at d:\Software\Setup\setup.exe, where d:\ is the drive letter of your CD-ROM drive. 3. Work through the installation wizard. Unless otherwise instructed, accept the defaults. Note: The SafeNet VPN Adapter, which supports L2TP, is installed only when these network components are already installed on your computer: Operating system Windows 95 Windows 98 and Me Windows NT Component Dial-Up Networking with the Microsoft Dial-Up Networking 1.3 Upgrade Dial-Up Networking Remote Access Server (RAS) Because Windows 2000 and XP use the native Windows L2TP adapter, the SafeNet L2TP adapter isn't installed on computers running these operating systems. 4. When the installation completes, click Finish. 5. To complete the client installation, make sure that your computer restarts. Upgrading To upgrade to this version of the NETGEAR ProSafe VPN Client , take these steps: 1. Uninstall the current version on your computer through the Control Panel Add/Remove Programs application: a. In the uninstall wizard, on the Maintenance dialog box, click Remove. This removes all the client product's components, but not your security policy. b. The Uninstall Security Policy dialog box prompts you to delete your IPSec security policy, which includes any certificates and private keys: r To keep it, click No. You can import this security policy after you install the new file:///C|/cdimagetools/vpnClient/html/QuickInstall.htm (2 of 3)11/19/2003 11:59:43 PM NETGEAR ProSafe VPN Client Quick Installation Guide version of the NETGEAR ProSafe VPN Client. r To delete it, click Yes. c. When the Maintenance Complete dialog box opens, click Finish. d. To complete the uninstall, make sure that your computer restarts. 2. Install this new version of the NETGEAR ProSafe VPN Client software. Getting Started The NETGEAR ProSafe VPN Client contains two primary modules: q Security Policy Editor to configure and maintain the security policy Certificate Manager to request, store, and administer certificates q To learn how to use the NETGEAR ProSafe VPN Client, go to Start>Programs>NETGEAR ProSafe VPN Client>NETGEAR ProSafe VPN Client Help. © 2003 NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR Inc. Other product and company names may be the trademarks of their respective owners. file:///C|/cdimagetools/vpnClient/html/QuickInstall.htm (3 of 3)11/19/2003 11:59:43 PM ...