Electronic user's guide released subject to "Nokia User's Guides Terms and Conditions, 7th June, 1998" Nokia 30 GSM Connectivity Terminal User's guide for modem use 9357346 Issue 2 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product TME-3 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2002 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. HyperTerminal is a registered trademark of Hilgraeve Inc. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular accessories may vary by region. Please check with the Nokia dealer nearest to you. FOR YOUR SAFETY 5 1. Introduction 6 Three ways of using the Nokia 30 with a compatible PC or other compatible device: 7 Sales package 8 2. Features of the Nokia 30 9 Data connections and messaging 9 Supplementary services 11 AutoPIN 11 3. Getting started 12 Setting up the terminal 12 Installing the SIM card 13 Mounting the terminal 14 Placing the terminal 14 Terminal connectors 15 Entering the PIN code 17 Changing the PIN code 20 Configure Nokia modem options 23 Create new Dial-up connection 24 GPRS connection 27 HSCSD or CSD connection 28 Enter user name and password 29 Name your connection 29 Set up your Internet mail account 30 Additional settings 30 Settings for Dial-up connections 31 Set properties 32 Connecting to the Internet 34 Uninstalling Modem setup for Nokia 30 36 Modem setup for standard modem driver 36 Communications software 37 5. Light indicators 39 6. Accessories 42 7. Troubleshooting 43 First things to check 43 Poor reception 43 Blocked PIN code 44 No connection 44 No Internet connection 45 Modem driver 45 4. Modem installation for Nokia 30 terminal 21 Modem setup for Nokia 30 21 Introduction 21 Getting started 22 Modem Setup 22 Copyright ©2002 Nokia. All rights reserved. 3 Contents Contents 9. Nokia 30 as an M2M Communications device 48 User control mode 48 AT command mode 49 M2M System mode 49 Placing the terminal for M2M communication 50 IMPORTANT SAFETY INFORMATION 52 TECHNICAL SPECIFICATIONS 55 Copyright ©2002 Nokia. All rights reserved. 4 Contents 8. Access codes 46 CARE AND MAINTENANCE 51 Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual. INTERFERENCE All wireless devices may get interference, which could affect performance. DO NOT USE IN HOSPITALS Follow any regulations or rules. Do not use near medical equipment. USE SENSIBLY Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel must install or repair equipment. ACCESSORIES Use only approved accessories. Do not connect incompatible products. BACKUP COPIES Remember to make backup copies of all important data. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products. Copyright ©2002 Nokia. All rights reserved. 5 FOR YOUR SAFETY FOR YOUR SAFETY The Nokia 30 is a GSM Connectivity Terminal with many advanced functions. With the Nokia 30 GSM Connectivity Terminal connected to your compatible PC or to a compatible device, you can, for example, make data calls, send messages, connect to the Internet and so on. The Nokia 30 offers high speed wireless connections and it supports several data connection types such as GPRS, highspeed data, USSD and text messages over EGSM900/GSM1800 networks. The Nokia 30 GSM Connectivity Terminal also has highly useful security-related features such as AutoPIN, GSM security codes and GSM encryption for end-user privacy. The Nokia 30 has an internal antenna but if the signal strength is insufficient for optimal use, an external antenna can be attached to the terminal. When the Nokia 30 is attached to the data adapter RS-232, it can be used as a stand-alone modem when connected to a compatible PC or compatible device. This user's guide describes how to use of the Nokia 30 GSM Connectivity Terminal as a wireless modem. Copyright ©2002 Nokia. All rights reserved. 6 Introduction 1. Introduction Connected to a PC as a wireless modem The Nokia 30 is connected to your computer and is installed on your computer as a modem. Communications applications can subsequently be used to send and receive data over the wireless connection provided by the Nokia 30. For more detailed information, see Modem installation for Nokia 30 terminal on page 21. Connected to a PC and typing the AT commands on a terminal software application The AT commands are typed directly in an application, for example Hyper Terminal®. The Nokia 30, used as a modem, follows these commands. See Entering the PIN code as an example of this on page 17. Connected to an electronics application When the Nokia 30 terminal is connected to the data adapter RS-232, it can be attached to a device with a serial interface for a modem. This device communicates with the Nokia 30 via the RS-232 interface using integrated AT commands. Read more about the use of Nokia 30 for M2M communications on page 49. Copyright ©2002 Nokia. All rights reserved. 7 Introduction s Three ways of using the Nokia 30 with a compatible PC or other compatible device: The complete sales package for the Nokia 30 GSM Connectivity Terminal includes the following items: 1. Nokia 30 GSM Connectivity Terminal 2. Power supply ACW-5A 3. Data adapter RS-232 4. Data cable RS-232 5. Installation kit 6. Product note 7. Nokia 30 CD-ROM Copyright ©2002 Nokia. All rights reserved. 8 Introduction s Sales package In this chapter the main features of the Nokia 30 terminal are described in brief. Note: Do not switch on the terminal when wireless device use is prohibited or when it may cause interference or danger. A number of features included in this guide are called Network Services. These are special services that you arrange through your wireless service provider. Before you can take advantage of any of these Network Services, you must subscribe to them through your service provider and obtain instructions for their use from your service provider. For example, features like wireless data connections and supplementary services are network dependent features in Nokia 30 GSM Connectivity Terminal. s Data connections and messaging The Nokia 30 GSM Connectivity Terminal supports five technologies for wireless data transfer, which can be used where GSM networks support them. It is possible to use different AT commands depending on the data bearer in use. Note: Before you can use GPRS, HSCSD, CSD or USSD, you must subscribe to these services. You must also save the settings for the applications used with these technologies. See Modem installation for Nokia 30 terminal on page 21. Copyright ©2002 Nokia. All rights reserved. 9 Features of the Nokia 30 2. Features of the Nokia 30 With GPRS (General Packet Radio Service) data is transferred over the network in small, standardized packets. Transferring data as packets makes the transfer more efficient. Given that the Nokia 30 supports GPRS multi-slot class 6, multiple timeslots can be used for data transfer at the same time. HSCSD With HSCSD (High Speed Circuit Switched Data) the Nokia 30 acts as a multi-slot class 6 terminal and it offers data transfer speeds of up to 43.2 kbit/s. CSD CSD (Circuit Switched Data) offers data speed of up to 14.4 kbit/s. SMS SMS (Short Message Service) is used to send and receive messages containing a maximum of 160 characters via the Nokia 30. SMS is a convenient way to pass data quickly and easily to and from Nokia 30 terminals. USSD USSD (Unstructured Supplementary Services Data) offers reliable interactive messaging services. USSD can be used to send and receive messages containing a maximum of 182 characters via the Nokia 30. With USSD, the session is established for the duration of the connection. This increases data transfer reliability and shortens response times as the delay is known. Note: USSD messages can only be sent to the network, not directly to another mobile terminal. Copyright ©2002 Nokia. All rights reserved. 10 Features of the Nokia 30 GPRS The Nokia 30 terminal also supports additional network dependent services such as: · Call forwarding to forward your calls to another number you specify. · Call restriction to restrict outgoing and incoming calls. · Call transfer to connect two different callers with each other and then disconnect one's own call without disturbing the other two callers. · Call waiting alerts you of another incoming call during a phone call. · In-call handling to switch between incoming and active calls. · Multiparty call to connect several callers to one conversation. · Security options such as Call barring. You can take these supplementary services into use by changing the settings of Nokia 30. This can be done using e.g. the Nokia 30 Configurator. s AutoPIN SIM security in the Nokia 30 terminal can be achieved by using the AutoPIN feature that makes the SIM card useless to any unauthorized user. The standard PIN request is used by default in the Nokia 30, however, the AutoPIN feature can be switched on with the Nokia 30 Configurator software. The PIN code is then programmed in the terminal's memory where it is relayed in unusual situations, for example when the terminal is restarted. Copyright ©2002 Nokia. All rights reserved. 11 Features of the Nokia 30 s Supplementary services s Setting up the terminal To use the Nokia 30 GSM Connectivity Terminal for the first time, proceed as follows: 1. Install the SIM card as described on page 13. 2. Mount the terminal on the data adapter RS-232. 3. Place the terminal in a proper location considering the field strength and antenna's functionality. 4. Connect the data cable RS-232 to the terminal and to a compatible PC or other compatible device. Connect the power supply ACW-5A to the terminal and to an AC wall outlet. 5. Enter the PIN code if your SIM card requires it. Warning! To avoid damage to the SIM card, do not install, move or remove the SIM card if the power supply is connected to an AC wall outlet. Mount the terminal on the data adapter RS-232 before connecting the power supply. Copyright ©2002 Nokia. All rights reserved. 12 Getting started 3. Getting started Keep all miniature SIM cards out of the reach of small children. The Nokia 30 SIM card reader supports 3V small-size SIM cards. The SIM card is attached in its position with the plastic SIM cover. If you need to remove the SIM card from the terminal, do so carefully, for example using a sharp-pointed tool. Note: Removing the SIM card when the Nokia 30 is connected to the data adapter RS-232 is not possible. 1. Remove the SIM cover from the terminal by first lifting the wider end of the SIM cover upwards. 2. Insert your SIM card into the slot and make sure the golden contact area is facing upwards and the bevelled corner is on the left. 3. Replace the SIM cover by pushing the narrow end in first, then snapping the cover closed. Note: If the SIM card is installed but the Nokia 30 terminal still requires the insertion of a SIM card, this means that your SIM card is not supported by the terminal. The Nokia 30 supports 3V SIM cards only. Copyright ©2002 Nokia. All rights reserved. 13 Getting started Installing the SIM card Mount the terminal downwards on the data adapter RS-232 and use the screws supplied in the sales package to tighten the terminal in the right position. Note: If you wish to mount the terminal on a wall, first attach the data adapter RS-232 to the wall before mounting the terminal onto it. Placing the terminal Install the terminal either horizontally or vertically on the wall or on a horizontal surface. The best insta ...