User manual NOKIA N72-5

User's Guide Nokia N72-5 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this RM-180 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/ declaration_of_conformity/ The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Copyright © 2007 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. 0434 This product includes software licensed from Symbian Software Ltd (c) 1998200(7). Symbian and Symbian OS are trademarks of Symbian Ltd. JavaTM and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending. Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending. Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2007 Tegic Communications, Inc. All rights reserved. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See . Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided `as is'. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC / INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Issue 2 EN, 9247402 Contents For your safety...........................................8 Get connected ......................................... 11 Your Nokia N72 ...................................... 12 Help .........................................................................................12 Tutorial ...................................................................................12 Useful shortcuts...................................................................12 Clock........................................................................................14 Clock settings................................................................14 World clock....................................................................14 Volume and loudspeaker control ....................................15 File manager .........................................................................15 View memory consumption ......................................16 Memory low--free memory.......................................16 Memory card tool................................................................16 Format a memory card...............................................17 Active standby mode.......................................................... 21 Make calls ................................................22 Calls......................................................................................... 22 Make a conference call.............................................. 22 Speed dial a phone number...................................... 23 Voice dialing ................................................................. 23 Answer or reject a call....................................................... 24 Call waiting................................................................... 24 Options during a call .................................................. 24 Log........................................................................................... 25 Recent calls .................................................................. 25 Call duration ................................................................. 25 Packet data ................................................................... 26 Monitor all communication events........................ 26 Contacts (Phonebook) .............................28 Save names and numbers ................................................. 28 Default numbers and addresses .............................. 28 Copy contacts....................................................................... 29 SIM directory and other SIM services ................... 29 Add ringing tones for contacts ....................................... 30 Create contact groups ....................................................... 30 Personalise your device .......................... 18 Profiles--set tones ...............................................................19 Offline profile................................................................19 Transfer content from another device...........................20 Change the look of your device.......................................20 Remove members from a group.............................. 30 Camera and Gallery .................................31 Camera................................................................................... 31 Take pictures................................................................. 31 Take pictures in a sequence ..................................... 32 You in the picture--self-timer ................................. 33 The flash......................................................................... 33 Adjust still image camera settings......................... 33 Adjust color and lighting .......................................... 34 Shooting modes ........................................................... 34 Edit images.................................................................... 35 Record videos ............................................................... 36 Edit video clips............................................................. 37 Gallery .................................................................................... 39 View images and video clips .................................... 40 Slide show ..................................................................... 41 Albums............................................................................ 41 PrintOnline .................................................................... 42 Online sharing .............................................................. 43 RealPlayer.............................................................................. 47 Play video or sound clips........................................... 47 Create a track list........................................................ 47 Stream content over the air..................................... 48 Receive RealPlayer settings...................................... 48 Movie director...................................................................... 49 Create a quick muvee................................................. 49 Create a custom muvee............................................. 49 Messaging.................................................51 Write text .............................................................................. 52 Traditional text input ................................................. 52 Predictive text input--dictionary ............................ 52 Copy text to clipboard ............................................... 54 Write and send messages ................................................. 54 Receive MMS and e-mail settings ......................... 56 Inbox--receive messages................................................... 56 Multimedia messages................................................. 56 Data and settings ........................................................ 57 Web service messages................................................ 58 My folders ............................................................................ 58 Mailbox .................................................................................. 58 Open the mailbox........................................................ 58 Retrieve e-mail messages ......................................... 58 Delete e-mail messages............................................. 59 Disconnect from the mailbox .................................. 60 Imaging .....................................................46 Image print ........................................................................... 46 Printer selection........................................................... 46 Print preview ................................................................ 46 Print settings ................................................................ 46 Outbox--messages waiting to be sent...........................60 View messages on a SIM card .........................................61 Messaging settings .............................................................61 Text messages...............................................................61 Multimedia messages.................................................62 E-mail..............................................................................63 Web service messages................................................65 Cell broadcast ...............................................................65 Other settings ...............................................................65 Radio ........................................................ 66 Listen to the radio...............................................................66 View visual content ............................................................67 Saved stations ......................................................................67 Settings ..................................................................................67 Enter the settings manually ..................................... 71 Bookmarks view................................................................... 72 Add bookmarks manually.......................................... 72 Send bookmarks........................................................... 72 Make a connection ............................................................. 72 Connection security.................................................... 73 Browse.................................................................................... 73 View saved pages ........................................................ 74 Download and purchase items........................................ 74 End a connection................................................................. 75 Empty the cache .......................................................... 75 Web settings......................................................................... 75 My own.....................................................77 Games..................................................................................... 77 Music player ......................................................................... 77 Play music...................................................................... 77 Playlists .......................................................................... 78 Go to--add shortcuts.......................................................... 78 Delete a shortcut ......................................................... 78 IM--instant messaging (chat).......................................... 78 Receive IM settings..................................................... 79 Connect to an IM server............................................ 79 Modify your IM settings ............................................ 79 Search for IM groups and users .............................. 80 Join and leave an IM group...................................... 80 Calendar................................................... 69 Create calendar entries......................................................69 Set a calendar alarm...................................................70 Calendar views .....................................................................70 Delete calendar entries......................................................70 Calendar settings.................................................................70 Web.......................................................... 71 Access the Web....................................................................71 Receive browser settings...........................................71 Chat................................................................................. 80 View and start conversations .................................. 81 IM contacts................................................................... 81 Manage IM groups...................................................... 81 Chat server settings.................................................... 81 Converter............................................................................... 91 Set base currency and exchange rates.................. 92 To-do ...................................................................................... 92 Notes ...................................................................................... 92 Recorder................................................................................. 93 Connectivity .............................................83 Bluetooth connectivity...................................................... 83 Bluetooth connectivity settings.............................. 84 Send data using Bluetooth connectivity .............. 84 Pair devices ................................................................... 85 Receive data using Bluetooth connectivity ......... 86 Switch off Bluetooth connectivity ......................... 86 PC connections .................................................................... 86 CD-ROM......................................................................... 86 Your device as a modem ........................................... 86 Connection manager.......................................................... 87 View data connection details .................................. 87 Remote synchronisation ................................................... 88 Create a new synchronisation profile ................... 88 Synchronise data......................................................... 89 Device manager................................................................... 89 Server profile settings................................................ 90 Tools..........................................................94 Settings.................................................................................. 94 Phone settings.............................................................. 94 Call settings .................................................................. 95 Connection settings.................................................... 96 Date and time............................................................... 98 Security .......................................................................... 99 Call diverting ..............................................................101 Call barring..................................................................102 Network........................................................................102 Enhancement settings .............................................102 Voice commands ...............................................................103 Application manager........................................................103 Install applications and software .........................104 Remove applications and software ......................105 Application settings..................................................105 Activation keys--handle copyright-protected files .105 Office ........................................................91 Calculator.............................................................................. 91 Troubleshooting .................................... 107 Q&A.......................................................................................107 Battery information.............................. 110 Charging and discharging .............................................. 110 Nokia battery authentication guidelines................... 110 Additional safety information............. 114 Index ...................................................... 117 Care and maintenance ......................... 113 For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELING Do not use the device at a refueling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your device is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user 8 guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so. Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading using the browser or over MMS, require network support for these technologies. About your device The wireless device described in this guide is approved for use on the EGSM 900/1800/1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws, and respect privacy and legitimate rights of others. When taking and using images or video clips, obey all laws, and respect local customs as well as privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. 9 For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Enhancements, batteries, and chargers Always switch the device off, and disconnect the charger before removing the battery. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3, and AC-4 charger, and from an AC-1, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the CA-44 charger adapter. The battery intended for use with this device is BL-5C. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 10 Use your device on the 2G network. See `About your device', p. 9. Use Bluetooth technology to transfer files and connect to compatible enhancements. See `Bluetooth connectivity', p. 83. Use a compatible USB data cable, for instance the Nokia Connectivity Cable CA-53, to connect to compatible devices, such as printers and PCs. Use a compatible memory card to transfer data or back up information. See `Memory card tool', p. 16. 11 Get connected Get connected Your Nokia N72 Your Nokia N72 Model number: Nokia N72-5 Hereinafter referred to as Nokia N72. Tutorial The tutorial gives you information about some of the features of your device. To view the tutorial, insert the memory card into your device, press , and select My own > Tutorial and the section you want to view. Help Your device has context-sensitive help. You can access the help from an application or from the main menu. When an application is open, to access help for the current view, select Options > Help. Example: To view instructions on how to create a contact card, start to create a contact card, and select Options > Help. When you are reading the instructions, to switch between help and the application that is open in the background, press and hold . To open help from the main menu, select Tools > Help. Select the desired application to view a list of help topics. To search for help topics using keywords, select Options > Search by keyword. When you are reading a help topic, to view other related topics, press or . Useful shortcuts Use shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions. Take pictures · To adjust image setup settings before taking a picture, press . · After taking a picture, to send the image, press and select Via multimedia, Via e-mail, or Via Bluetooth. For more information, see `Messaging', p. 51 and `Bluetooth connectivity', p. 83. · To delete an image, press . 12 Record video clips · To adjust video setup settings before recording video, press . · After recording a video clip, to send the video, press and select Via multimedia, Via e-mail, or Via Bluetooth. You cannot send video clips saved in the .mp4 format in a multimedia message. For more information, see `Messaging', p. 51 and `Bluetooth connectivity', p. 83. · To delete a video clip, press . Edit text and lists · To mark an item in a list, scroll to it, and press and at the same time. · To mark multiple items in a list, press and hold while you press or . To end the selection, release , then release . · To copy and paste text: To select letters and words, press and hold . At the same time, press or . As the selection moves, text is highlighted. To copy the text to clipboard, while still holding , select Copy. To insert the text into a document, press and hold , and select Paste. For further shortcuts available in the standby mode, see `Active standby mode', p. 21. Keypad lock (keyguard) · To lock: In the standby mode, press , then . · To unlock: Press , then . · To turn on the display light when the keypad lock is on, press . When the keypad lock is on, calls may be possible to the official emergency number programmed into your device. 13 Your Nokia N72 · To take a new picture, press key. or the camera capture Standby mode · To switch between applications that are open, press and hold . If memory is low, the device may close some applications. The device saves any unsaved data before closing an application. Leaving applications running in the background increases the demand on battery power and reduces the battery life. · To change the profile, press , and select a profile. · To switch between General and Silent profiles, press and hold . If you have two phone lines, this action switches between the two lines. · To open the last dialled numbers list, press . · To use voice commands, press and hold . · To start a connection to Web, press and hold . See `Web', p. 71. Your Nokia N72 Clock Press , and select Clock. To set a new alarm, select Options > Set alarm. Enter the alarm time, and select OK. When the alarm is active, is shown. To turn off the alarm, select Stop. When the alarm tone sounds, select Snooze to stop the alarm for five minutes, after which it resumes. You can do this a maximum of five times. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. To cancel an alarm, select Clock > Options > Remove alarm. To change the clock shown in the standby mode, scroll down, and select Clock type > Analogue or Digital. To allow the mobile phone network to update the time, date, and time zone information to your device (network service), scroll down, and select Auto time update. For the Auto time update setting to take effect, the device restarts. To change the alarm tone, scroll down, and select Clock alarm tone. To change the daylight-saving time status, scroll down, and select Daylight-saving. Select On to add 1 hour to the My current city time. See `World clock', p. 14. When the daylight-saving is active, is shown in the clock main view. This setting is not shown if Auto time update is on. World clock Open Clock, and press to open the world clock view. In the world clock view, you can view the time in different cities. To add cities to the list, select Options > Add city. Enter the first letters of the city name. The search field appears automatically, and the matching cities are displayed. Select a city. You can add a maximum of 15 cities to the list. Clock settings To change the clock settings, select Options > Settings in the clock. To change the time or date, select Time or Date. 14 Volume and loudspeaker control To increase or decrease the volume level when you have an active call or are listening to a sound, press or . The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. Sound applications use the loudspeaker by default. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To use the loudspeaker during a call, start a call, and select Options > Activate loudsp.. To turn off the loudspeaker when you have an active call or are listening to a sound, select Options > Activate handset. Many features of the device use memory to store data. These features include contacts, messages, images, ringing tones, calendar and to-do notes, documents, and downloaded applications. The free memory available depends on how much data is already saved in the device memory. You can use a compatible memory card as extra storage space. Memory cards are rewritable, so you can delete and save data on a memory card. To browse files and folders in the device memory or on a compatible memory card (if inserted), press , and select Tools > File mgr.. The device memory view ( ) opens. Press to open the memory card view ( ). To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to folder or Copy to folder. To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name. Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device. See the CD-ROM supplied with your device. 15 Your Nokia N72 To set your current city, scroll to a city, and select Options > My current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone. File manager Your Nokia N72 View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details > Phone memory. Scroll down to Free memory to view the amount of free memory in the device. To view the amount of free memory on a memory card, if you have a compatible card inserted in the device, select Options > Memory details > Memory card. Scroll down to Free memory to view the amount of free memory on the memory card. To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following: · Messages from Inbox, Drafts, and Sent folders in Messaging · Retrieved e-mail messages from the device memory · Saved Web pages · Saved images, videos, or sound files · Contact information · Calendar notes · Downloaded applications. See also `Application manager', p. 103. · Any other data that you no longer need Memory low--free memory The device notifies you if the device memory or memory card memory is getting low. To free device memory, transfer data to a compatible memory card in the file manager. Mark files to be moved, select Options > Move to folder > Memory card, and a folder. Tip! To free memory from the device or from a memory card, use Image Store available in Nokia PC Suite to transfer images and video clips to a compatible PC. See the CD-ROM supplied with your device. Memory card tool Note: This device uses a Reduced Size Dual Voltage (1.8 or 3V) MultiMediaCard (RS-MMC). To ensure interoperability, use only dual voltage RS-MMCs. Check the compatibility of an RS-MMC with its manufacturer or provider. Use only Reduced Size MultiMediaCards (RS-MMC) approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device. 16 Press , and select Tools > Memory. You can use a compatible memory card as extra storage space. It is also good to regularly back up the information in the device memory to a memory card. The information can be restored to the device later. You cannot use the memory card if the door of the memory card slot is open. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To back up information from device memory to a compatible memory card, select Options > Backup phone mem. To restore information from a compatible memory card to the device memory, select Options > Restore from card. Tip! To rename a memory card, select Options > Memory card name. To format a memory card, select Options > Format mem. card. Select Yes to confirm. When formatting is complete, enter a name for the memory card, and select OK. Format a memory card When a memory card is reformatted, all data on the card is permanently lost. 17 Your Nokia N72 Keep all memory cards out of the reach of small children. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. Personalise your device Personalise your device Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. · To use the standby display for fast access to your most frequently used applications, see `Active standby mode', p. 21. · To change the standby mode background image or what is shown in the power saver, see `Change the look of your device', p. 20. · To customise the ringing tones, see `Profiles--set tones', p. 19. · To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see `Standby mode', p. 94. The scroll key shortcuts are not available if the active standby is on. · To change the clock shown in the standby mode, press , and select Clock > Options > Settings > Clock type > Analogue or Digital. · To change the clock alarm tone, press , and select Clock > Options > Settings > Clock Alarm tone and a tone. · To change the calendar alarm tone, press , and select Calendar > Options > Settings > Calendar alarm tone and a tone. · To change the welcome note to a text or an image, press , and select Tools > Settings > Phone > General > Welcome note or logo. · To assign an individual ringing tone to a contact, press , and select Contacts. See `Add ringing tones for contacts', p. 30. · To assign a speed dial to a contact, press a number key in the standby mode ( is reserved for the voice mailbox), and press . Select Yes, then select a contact. · To rearrange the main menu, in the main menu, select Options > Move, Move to folder, or New folder. You can move less used applications into folders, and place applications that you use more often into the main menu. 18 The Offline profile lets you use the device without To set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press , and select Tools > Profiles. If the currently selected profile is other than General, the profile name is shown at the top of the display in the standby mode. To change the profile, press in the standby mode. Scroll to the profile you want to activate, and select OK. To modify a profile, press , and select Tools > Profiles. Scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press to open the choices. Tones stored on a memory card are indicated with . You can scroll through the tone list and listen to each one before you make your selection. Press any key to stop the sound. Tip! In the list of tones, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones. To create a new profile, select Options > Create new. connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later. Warning: In the offline profile you cannot make or receive any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. Warning: Your device must be switched on to use Offline profile. Do not switch the device on when wireless device use is prohibited or when it may cause interference or danger. To leave the Offline profile, press , and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). If Bluetooth connectivity is activated before entering the Offline profile, it will be deactivated. Bluetooth connectivity is automatically reactivated after leaving the Offline profile. See `Bluetooth connectivity settings', p. 84. 19 Personalise your device Profiles--set tones Offline profile Personalise your device Transfer content from another device You can copy contacts, calendar, images, video, and sound clips using Bluetooth connectivity, from a compatible Nokia Series 60 device. You can use your Nokia N72 without a SIM card. The offline profile is automatically activated when the device is switched on without a SIM card. This allows you to use the SIM card in another device. To avoid duplicate entries, you can transfer the same type of information (for example, contacts) from the other device to your Nokia N72 only once. Before starting the transfer, you must activate Bluetooth connectivity on both devices. On each device, press , and select Connect. > Bluetooth. Select Bluetooth > On. Give a name to each device. To transfer content: 1 Press , and select Tools > Transfer on your Nokia N72. Follow the instructions on the screen. 2 The device searches for other devices with Bluetooth connectivity. When it has finished the search, select your other device from the list. 3 You are asked to enter a code on your Nokia N72. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. 4 The Transfer application is sent to the other device as a message. 5 Open the message to install Transfer on the other device, and follow the instructions on the screen. 6 From your Nokia N72, select the content you want to copy from the other device. Content is copied from the memory and memory card of the other device to your Nokia N72 and memory card. Copying time depends on the amount of data to be transferred. You can cancel copying and continue later. The Transfer application is added to the main menu of the other device. Change the look of your device To change the look of the display, such as the wallpaper and icons, press , and select Tools > Themes. The active theme is indicated by . In Themes you can group together elements from other themes or select images from the Gallery to personalise themes further. The themes on the memory card are indicated by . The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first. 20 To activate a theme, scroll to it, and select Options > Apply. To preview a theme, scroll to it, and select Options > Preview. To edit themes, scroll to a theme, and select Options > Edit to change the following options: Wallpaper--The image to be shown as a background image in the standby mode. Power saver--The power saver type on the display: date and time, or a text you have written yourself. See also `Display', p. 95. Image in 'Go to'--The background image for the Go to application. To restore the selected theme back to its original settings, select Options > Restore orig. theme when you edit a theme. The active standby display is shown with default applications across the top of the screen. Scroll to an application or event, and press . The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on. To change the default applications shortcuts: 1 Press , select Tools > Settings > Phone > Standby mode > Active standby apps., and press . 2 Highlight a shortcut to an application, and select Options > Change. 3 Select a new application from the list, and press . Some shortcuts may be fixed, and you are not able to change them. Active standby mode Use your standby display for fast access to your most frequently used applications. By default, the active standby mode is on. 21 Personalise your device To open a browser connection and download more themes, select Theme downloads. Press , select Tools > Settings > Phone > Standby mode > Active standby, and press to switch the active standby on or off. Make calls Make calls Calls Tip! To increase or decrease the volume during a call, press or . If you have set the volume to Mute, you cannot adjust the volume with the scroll key. To adjust the volume, select Unmute, and press or . You must copy the contacts from your SIM card to Contacts before you can make a call this way. See `Copy contacts', p. 29. To call your voice mailbox (network service), press and hold in the standby mode. See also `Call diverting', p. 101. Tip! To change the phone number of your voice mailbox, press , and select Tools > Voice mail > Options > Change number. Enter the number (obtained from your service provider), and select OK. To call a recently dialed number in the standby mode, press to access a list of the 20 last numbers you called or attempted to call. Scroll to the number you want, and press to call the number. 1 In the standby mode, enter the phone number, including the area code. Press to remove a number. For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2 Press to call the number. 3 Press to end the call (or to cancel the call attempt). Pressing always ends a call, even if another application is active. To make a call from Contacts, press , and select Contacts. Scroll to the desired name; or enter the first letters of the name to the search field. Matching contacts are listed. Press to call. Select the call type Voice call. Make a conference call 1 Make a call to the first participant. 2 To make a call to another participant, select Options > New call. The first call is automatically put on hold. 3 When the new call is answered, to join the first participant in the conference call, select Options > Conference. To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. 22 The device supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. After you finish the private conversation, select Options > Add to conference to return to the conference call. To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4 To end the active conference call, press . Your device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker's voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user's voice to recognize the voice commands better. The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag. 1 To start voice dialing, press and hold . If you are using a compatible headset with the headset key, press and hold the headset key to start voice dialing. 2 A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card. Speed dial a phone number To activate speed dialing, press , and select Tools > Settings > Call > Speed dialling > On. To assign a phone number to one of the speed dialing keys ( -- ), press , and select Tools > Speed dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox. To call in the standby mode, press the speed dial key and . 23 Make calls Voice dialing Make calls 3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a time-out of 1.5 seconds, the device dials the number. If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing. If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business). When you reject an incoming call, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. See also Reject call with SMS, p. 95. Call waiting You can answer a call while you have another call in progress if you have activated Call waiting (network service) in Tools > Settings > Call > Call waiting. Tip! To change the device tones for different environments and events (for example, when you want your device to be silent), see `Profiles--set tones', p. 19. To answer the waiting call, press on hold. . The first call is put Answer or reject a call To answer the call, press . To mute the ringing tone when a call comes in, select Silence. Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key. If you do not want to answer a call, press to reject it. The caller hears a line busy tone. If you have activated the Call divert settings > Voice calls > If busy function to divert calls, rejecting an incoming call also diverts the call. See `Call diverting', p. 101. To switch between the two calls, select Swap. Select Options > Transfer to connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls. To end the active call, press . To end both calls, select Options > End all calls. Options during a call Many of the options that you can use during a call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, 24 Replace--to end an active call and replace it by answering the waiting call. Send DTMF--to send DTMF tone strings (for example, a password). Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Select OK to send the tone. Tip! You can add DTMF tones to the Phone number or DTMF fields in a contact card. To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press . Call duration To monitor the approximate duration of your incoming and outgoing calls, press , and select My own > Log > Call duration. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To clear call duration timers, select Options > Clear timers. For this you need the lock code. See `Security', `Phone and SIM', p. 99. Log Recent calls To monitor the phone numbers of missed, received, and dialed calls, press , and select My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. 25 Make calls Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, and Transfer. Select from the following: Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press . Make calls Packet data To check the amount of data sent and received during packet data connections, press , and select My own > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received. Tip! If you want to see the duration of a voice call on the main display during an active call, select Options > Settings > Show call duration > Yes. Tip! To view a list of sent messages, press select Messaging > Sent. , and Monitor all communication events Icons in Log: Incoming Outgoing Missed communication events To monitor all voice and video calls, text messages, or data connections registered by the device, press , select My own > Log, and press the scroll key to the right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information. Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections. To filter the log, select Options > Filter and a filter. To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To set the Log duration, select Options > Settings > Log duration. The log events remain in the device memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted. To view the details of a communication event, in the general log view scroll to an event, and press the scroll key. Tip! In the details view you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options > Copy Number. 26 27 Make calls Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details. Contacts (Phonebook) Contacts (Phonebook) Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See `Data and settings', p. 57. Contact information can only be sent to or received from compatible devices. Tip! Regularly back up the information on the device to a compatible memory card. You can restore the information, such as contacts, to the device later. See `Memory card tool', p. 16. You can also use Nokia PC Suite to back up your contacts to a compatible PC. See the CD-ROM supplied with your device. press delete. and to mark the contacts, and press to Tip! To add and edit contact cards, use Nokia Contacts Editor available in Nokia PC Suite. See the CD-ROM supplied with your device. To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options > Add thumbnail. The thumbnail image is shown when the contact calls. Tip! To send contact information, select the card you want to send. Select Options > Send > Via text message, Via multimedia, Via e-mail, or Via Bluetooth. See `Messaging', p. 51 and `Send data using Bluetooth connectivity', p. 84. Save names and numbers 1 Select Options > New contact. 2 Fill in the fields that you want, and select Done. To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, Default numbers and addresses You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialling. 1 In contacts, select a contact, and press . 28 an address and Assign. 4 Select a number or an address you want to set as a default. SIM directory and other SIM services For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Press , and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls. To view the list of fixed dialling numbers, select Options > SIM contacts > Fixed dialling contacts. This setting is only shown if supported by your SIM card. To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialling. To add new numbers to the fixed dialling list, select Options > New SIM contact. You need the PIN2 code for these functions. When you use Fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message centre number and the recipient's phone number must be included on the fixed dialling list. Copy contacts If you have phone numbers stored on the SIM card, copy them to Contacts. Entries that are saved only on the SIM card are not shown in the contacts directory, and for incoming calls and messages, the device cannot match the number to the name. When a new SIM card is inserted in the device and you open Contacts for the first time, you are asked if you want to copy the contact entries on the SIM card to the device memory. Select Yes to copy the entries to your contacts directory. To copy individual names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts. To copy contacts to your SIM card, press , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied. 29 Contacts (Phonebook) 2 Select Options > Defaults. 3 Select a default to which you want to add a number or Tip! You can synchronise your contacts to a compatible PC with Nokia PC Suite. See the CD-ROM supplied with your device. Contacts (Phonebook) When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device. 5 Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add. 6 Select OK to add the contacts to the group. To rename a group, select Options > Rename, enter the new name, and select OK. Add ringing tones for contacts When a contact or group member calls you, the device plays the chosen ringing tone (if the caller's telephone number is sent with the call and your device recognises it). 1 Press to open a contact card, or go to the groups list, and select a contact group. 2 Select Options > Ringing tone. A list of ringing tones opens. 3 Select the ringing tone you wish to use for the individual contact or the selected group. To remove the ringing tone, select Default tone from the list of ringing tones. Remove members from a group 1 In the groups list, open the group you want to modify. 2 Scroll to the contact, and select Options > Remove from group. 3 Select Yes to remove the contact from the group. Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups. Create contact groups 1 In Contacts, press to open the groups list. 2 Select Options > New group. 3 Write a name for the group or use the default name Group, and select OK. 4 Open the group, and select Options > Add members. 30 Camera Your Nokia N72 has a high resolution camera on the back of the device that can be used to take still images and videos. To activate the camera, open the camera lens cover on the back of the device. The Camera application starts when the camera is activated, and you can see the view to be captured. In Camera, you can take pictures and record videos. To move between still image and video capture, select Options > Image mode or Video mode. The images and video clips are automatically saved in the Gallery. The cameras produce .jpeg images, and video clips are recorded in the 3GPP file format with the .3gp file extension (Normal video quality modes) or in the .mp4 file format (High video quality mode). See `Video settings', p. 37. You can also send images or a video in a multimedia message as an e-mail attachment, or by using Bluetooth connectivity. Tip! You can insert an image into a contact card. See `Save names and numbers', p. 28. Your Nokia N72 supports an image capture resolution of up to 1600 x 1200 pixels using the camera. The image resolution in these materials may appear different. Take pictures To make lighting and color adjustments before taking a picture, select Options > Image setup > Shooting mode, Flash, White balance, or Colour tone. See `Adjust color and lighting', p. 34 and `Shooting modes', p. 34. Tip! You can press the key or use the camera capture key (located on the right hand side of the device) for still image capture. Camera indicators show the following: · The device memory ( ) and memory card ( ) indicators (1) show where images are saved. · The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your device or a compatible memory card. · The mode indicator (3) shows the active mode. See `Shooting modes', p. 34. 31 Camera and Gallery Camera and Gallery · The flash indicator (4) shows if the flash is set to Automatic ( ), On/ forced ( ), or Off ( ). · The resolution indicator (5) shows the selected image quality. See `Adjust still image camera settings', p. 33. · The sequence mode indicator (6) shows that the sequence mode is active. See `Take pictures in a sequence', p. 32. · The self-timer indicator (7) shows that the self-timer is activated. See `You in the picture--selftimer', p. 33. Saving the captured image may take longer if you change the zoom, lighting, or color settings. When taking a picture, note the following: · It is recommended to use both hands to keep the camera still. · To take images or record video in different environments, use the correct mode for each environment. See `Shooting modes', p. 34. · The quality of a zoomed picture is lower than that of a non-zoomed picture. Camera and Gallery · The camera goes into the battery saving mode if there are no key presses within a minute. To continue taking pictures, press . After the image is taken, note the following: · If you do not want to keep the image, press . · To send the image, press and select Via multimedia, Via e-mail, or Via Bluetooth. For more information, see `Messaging', p. 51 and `Bluetooth connectivity', p. 83. This option is not available during an active call. · To send an image to the other party during an active call, select Options > Send to caller. · To edit the picture, select Options > Edit. See `Edit images', p. 35. · To print the picture, select Options > Print. See `Image print', p. 46. Take pictures in a sequence To set the camera to take pictures in a sequence with a single press of the key or the camera capture key, select Options > Sequence mode. If you press and hold the key or the camera capture key, image capture continues until you release the key. You can capture up to 100 images, depending on the available memory. You can also use the sequence mode with the Activate self timer. See `You in the picture--self-timer', p. 33. If the 32 The pictures are automatically saved in Gallery. You in the picture--self-timer Use the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Activate self timer > 10 seconds, 20 seconds, or 30 seconds. To activate the self-timer, select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay has elapsed. You can also use the Activate self timer in the sequence mode. See `Take pictures in a sequence', p. 32. Adjust still image camera settings There are two kinds of settings for the still image camera: Image setup settings and main settings. To adjust Image setup settings, see `Adjust color and lighting', p. 34. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following: Image quality--High - Print, Med. - E-mail, or Low Multimedia. The better the image quality, the more memory the image consumes. The quality of a zoomed picture is lower than that of a non-zoomed picture. If you want to print the image, select High - Print (resolution 1600x1200). If you want to send it through e-mail, select Med. - E-mail (resolution 1024x768). To send the image through MMS, select Low - Multimedia (resolution 640x480). Glossary: Resolution is a measure of sharpness and clarity of an image. Resolution refers to the number of The flash Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. The camera has an LED flash for low light conditions. The following flash modes are available: Automatic ( ), On/ forced ( ), and Off ( ). Select Options > Image setup > Flash > On/forced to use the flash. 33 Camera and Gallery self-timer is activated, a maximum of six pictures can be captured. If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This allows the subject of the picture to see when the picture is taken. There is no flash effect on the resultant picture. Camera and Gallery pixels in an image. The more pixels, the more detailed the picture is, and the more memory it consumes. Add to album--Select whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens. Extended zoom--Select On if you want to achieve maximum zoom but are prepared to accept lower image resolution. Show captured image--Select Yes if you want to see the captured image after it is taken, or No if you want to continue taking pictures immediately. Default image name--Set a default name for the images you are going to take. You can replace the date with your own text (for example, `Holiday_2006'). Memory in use--Select where to store your images. Flash (images and camera only)--Set the flash to Automatic, On/forced, or Off. See `The flash', p. 33. White balance--Select the current lighting condition from the list. This allows the camera to reproduce colors more accurately. Colour tone--Select a color effect from the list. The display changes to match any settings made, showing you how the change affects the pictures or videos. The settings return to the default settings when you close the camera. If you select a new mode, the settings are replaced by the settings of the selected mode. See `Shooting modes', p. 34. If you need to change the setup settings, you can change them after selecting a mode. Shooting modes Shooting modes help you to find the right color and lighting settings for the current environment. Select a mode for taking pictures or recording video clips from a modes list. The settings of each mode have been set according to a certain style or environment in which the pictures are taken. Select Options > Image setup/Video setup > Shooting mode: Video modes Normal ( )(default)--Use this mode in all conditions. Adjust color and lighting To enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, select Options > Image setup or Video setup, and select from the following options: Shooting mode--select a mode for the environment in which you are taking pictures. See `Shooting modes', p. 34. Every mode uses its own lighting settings that have been adjusted according to a certain kind of environment. 34 Image modes Automatic ( ) (default)--Use this mode in all conditions. User defined ( )--Use this mode to create a personalized scene with your own flash, white balance, and color tone settings. Portrait ( )--Use this mode to take portrait pictures, such as head shots and sitting poses. Landscape ( )--Use this mode when you take pictures of objects that are further away. Night ( )--Use this mode in low light conditions. Sport ( )--Use this mode to take pictures of fast moving objects. When you use this mode, the resolution of the images is reduced from 1600x1200 to 800x600. See Image quality, p. 33. When taking pictures, the default mode is Automatic. If you select the User defined mode, however, it is set as the default mode. To make your own mode suitable for a certain environment, select User defined mode. In the user mode you can adjust Based on mode, Flash, White balance, Colour tone, and Reset user mode options. To copy the settings of another mode, select Based on mode and the desired mode. To edit the pictures after taking them, or the ones already saved in Gallery, select Options > Edit. Select Apply effect to crop and rotate the image; adjust the brightness, color, contrast, compression, and resolution; and add effects, text, clip art, or a frame to the picture. To crop an image, select Options > Apply effect > Crop. Select Manual to crop the image size manually, or select a predefined aspect ratio from the list. If you select Manual, a cross appears on the upper left corner of the image. To move the cross, and select the area to be cropped, move the scroll key. Select Set. Another cross appears on the lower right corner. Select again the area to be cropped, and select Crop. To add clip art to an image, select Options > Apply effect > Clip-art. Select the item you want to add from the list, and press . To move, rotate, and change the size of the item, select Options > Move, Resize, or Rotate. To add text to an image, select Options > Apply effect > Text. Enter the text, and select OK. To edit the text, select Options > Move, Resize, Rotate, or Select colour. Shortcuts in the image editor: · To view an image in the full screen mode, press return to the normal view, press again. . To 35 Camera and Gallery Night ( )--Use this mode in low light conditions. Edit images Camera and Gallery · To zoom in or out, press and . Record videos To move between still image and video capture, select Options > Image mode or Video mode. Open the Video mode. To make lighting and color adjustments before recording a video, select Options > Video setup > Shooting mode, White balance, or Colour tone. See `Adjust color and lighting', p. 34. To select a mode, select Options > Video setup > Shooting mode. See `Shooting modes', p. 34. 1 Press to start recording. The record icon is shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video. 2 To pause recording at any time, select Pause. The pause icon ( ) blinks on the display. Video recording automatically stops if recording is set to pause and there are no key presses within a minute. 3 Select Continue to resume recording. 4 Select Stop to stop recording. The video clip is automatically saved to the Images & video folder of Gallery. See `Gallery', p. 39. Video recorder indicators show the following: · The device memory ( ) and memory card ( ) indicators (1) show where the video is saved. · The current video length indicator (2) shows elapsed time and time remaining. · The mode indicator (3) shows the active mode. See `Shooting modes', p. 34. · The microphone indicator (4) shows that the microphone is muted. · The video quality indicator (5) shows the selected video quality. After a video clip is recorded: · To immediately play the video clip you just recorded, select Options > Play. · If you do not want to keep the video, press . · To return to the viewfinder to record a new video, press . · To send the video, press and select Via multimedia, Via e-mail, or Via Bluetooth. For more information, see `Messaging', p. 51 and `Bluetooth connectivity', p. 83. This option is not available during an active call. 36 Video settings There are two kinds of settings for the video recorder: Video setup settings and main settings. To adjust Video setup settings, see `Adjust color and lighting', p. 34. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following: Audio recording--Select On if you want to record both image and sound. Video quality--Set the quality of the video clip to High, Normal, or Sharing. If you select High or Normal, the length of the video recording is restricted by the available space on your memory card, and up to 1 hour per clip. If you want to view the video on a compatible TV or PC, select High video quality, which has CIF resolution (352x288) and file format .mp4. You cannot send video clips saved in the .mp4 format in a multimedia message. If you want to view the clip in mobile phones, select Normal, which has QCIF resolution (176x144) and .3gpp file format. To send the video clip The Normal video clip is limited to 300 KB (approximately 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 kB. Contact your service provider or network operator for more information. Add to album--Select whether you want to save the recorded video clip to a certain album in Gallery. Select Yes to open a list of available albums. Show captured video--Select whether you want the recorded video clip to play automatically after the recording stops. Default video name--Define a name or select the date. Memory in use--Define the default memory store: device memory or memory card. Edit video clips You can edit video clips in Gallery. To edit video clips and create custom video clips, scroll to a video clip, and select Options > Edit. To create custom video clips, combine and trim video clips, and add images, sound clips, transitions, and effects. Transitions are visual 37 Camera and Gallery · To send a video clip to the other party during an active call, select Options > Send to caller. · To edit the video, select Options > Edit. See `Edit video clips', p. 37. through MMS, select Sharing (QCIF resolution, .3gpp file format). Camera and Gallery effects that you can add in the beginning and end of the video or between the video clips. In the video editor you can see two timelines: video clip timeline and sound clip timeline. If you add images, text, or transitions to a video clip, they are shown on the video clip timeline. To move on the timelines, scroll left or right. To switch between the timelines, scroll up or down. Edit text (shown only if you added text)--To move, remove or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the text. Edit image (shown only if you have added an image)--To move, remove or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the image. Edit sound clip: Cut--Trims the sound clip in the cut sound clip view. Move--Moves the sound clip to the selected location. Remove--Removes the sound clip from the video. Duplicate--Makes a copy of the selected sound clip. Set duration--Changes the length of the sound clip. Edit transition--There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active. Edit video, sound, image, text, and transitions To create custom video clips, mark and select one or more video clips, and select Options > Edit. Press and sound clip. Edit video clip: Cut--Trims the video clip in the cut video clip view. Add colour effect--Inserts a color effect on the video clip. Use slow motion--Slows the speed of the video clip. Mute/Unmute--Mutes or unmutes the original video clip sound. Move--Moves the video clip to the selected location. Remove--Removes the video clip from the video. Duplicate--Makes a copy of the selected video clip. to move between the video clip and the To modify the video, select from the following options: 38 Video clip--Inserts the selected video clip. A thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black view of the video clip. The name and length of the selected video clip is also shown. Image--Inserts the selected image. A thumbnail of the image is shown in the main view. Text--Inserts text to the video clip. You can insert a title, subtitle, or credits. Sound clip--Inserts the selected sound clip. The name and length of the selected sound clip is shown in the main view. New sound clip--Records a new sound clip to the selected location. Movie--Preview the movie in the full screen mode or as a thumbnail, save or send the movie, or cut the movie to a proper size for sending it in a multimedia message. Tip! To take a snapshot of a video clip, select Options > Take snapshot in the thumbnail preview view or in the cut video view. To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory. Select Send > Via multimedia, Via e-mail, or Via Bluetooth if you want to send the video. Contact your service provider or network operator for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, appears. Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth connectivity. See `Send data using Bluetooth connectivity', p. 84. You can also transfer your videos to your PC using Bluetooth wireless technology or by using a memory card reader (enhancement). Gallery To store and organize your images, video clips, sound clips, playlists, and streaming links, press , and select Gallery. To open the gallery from the Camera application, select Options > Go to Gallery. In Camera, only the Images & video folder is available. 39 Camera and Gallery Insert: Tip! In the Settings view, you can define Default video name, Default image name, Resolution, and Memory in use. Camera and Gallery Tip! To switch from Gallery to the camera, select Options > Go to Camera from the Images & video folder. Select Images & video , Tracks , Sound clips , Links , or All files , and press to open it. You can browse and open folders; and mark, copy, and move items to folders. Video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See `RealPlayer', p. 47. Music tracks are played and managed in the music player application. See `Music player', p. 77. Tip! You can transfer images from your device to a compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied with your device. To copy or move files to a compatible memory card or to device memory, select a file and Options > Organise > Copy to memory card/Move to memory card or Copy to phone mem./Move to phone mem.. Files stored on the memory card are indicated with . To download files into Gallery in one of the main folders using the browser, select Graphic downls., or Video downlds., Track downlds., or Sound downlds.. The browser opens, and you can select a bookmark from which the site can download. View images and video clips Pictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. The quality of a video clip is indicated with one of the following icons: (High), (Normal), and (Sharing). Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or through Bluetooth connectivity. To be able to view a received image or video clip in the gallery or in the media player, you must save it in the device memory or on a compatible memory card. Open the Images & video folder in Gallery. The images and video clip files are in a loop, and ordered by date. The number of files can be seen on the display. To browse the files, scroll left or right. Press and hold or to browse the files in a continuous loop. To edit an image or a video clip, select Options > Edit. An image editor or a video editor opens. 40 To add an image or a video clip to an album in the gallery, select Options > Add to album. See `Albums', p. 41. To create custom video clips, select a video clip, or several clips in the gallery, and select Options > Edit. See `Edit video clips', p. 37. To print your images on a printer connected to your device, or to store them on a compatible memory card for printing, select Options > Print. See `Image print', p. 46. To zoom an image, select Options > Zoom in. The zooming ratio is at the top of the display. The zooming ratio is not stored permanently. To delete an image or video clip, press . To add sound to the slide show, select Options > Slide show > Music settings and from the following: · Music--Select On, or Off. · Track--Select a music file from the list. · Volume--Press to decrease the volume, or to increase the volume. Albums With albums you can conveniently manage your images and video clips. To view the albums list, in the Images & video folder, select Options > Albums. The albums are ordered alphabetically. To view the content of an album, press . To create a new album, select Options > New album. Enter a name for the album, and select OK. To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press . To remove a file from an album, press . The file is not deleted from the Images & video folder in Gallery. Slide show Use Slide show to view images and video clips in the full screen mode. Select from the following: · Start--to start the slide show. · Play--to open the RealPlayer application. · Pause--to pause the slide show · Continue--to resume the slide show · End--to close the slide show. 41 Camera and Gallery To save memory space after you print or upload your images, and still keep a small version of the image on your device, select Options > Shrink. Press (faster) or (slower) to adjust the Tempo. Press (previous) or (next) to browse the thumbnails. Camera and Gallery PrintOnline Note: The availability of this service may vary according to your country or sales area, and the service may only be available in a limited number of languages. With the PrintOnline application you can print images online, and order different products with the selected image, such as mugs or mouse pads. The available products depend on the service provider. In order to use PrintOnline, you must subscribe to the service with an online printing service provider and have at least one printing service configuration file installed. The files can be obtained from printing service providers that support PrintOnline. You can only print images that are in .jpeg format. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. 1 Press , and select Gallery > Images & video. Select an image or images, and Options > Print > Order prints. 2 Select a service provider from the list. 3 Select Options and from the following: Open--to start the connection to the service provider Remove--to remove the service provider from the list. If you remove the last service provider from the list, the Order prints option is not available until you have at least one configuration file installed. Log--to view the details of the previous orders: the name of the service provider, total sum, and status of the order. When you are connected to the service provider server, the images preview view opens, and displays the images you selected in Gallery. 4 Select Options and from the following: Preview--to view the image before ordering a print. Scroll up or down to view the images. Order now--to submit your order Change product order--to adjust the product details and number of copies for the selected image. In the product order view, you can select which product and of what type you want to order. The available options and products vary depending on the service provider. Scroll left or right to view and change the image details of the other images in the order. Change customer info--to change the customer and order information. You can copy the customer information from contacts. Add image--to add more images to the order Remove image--to remove images from the order Log--to view the details of the previous orders. 42 Online sharing Note: The availability of this service may vary according to your country or sales area, and the service may only be available in a limited number of languages. With the Online sharing application, you can share your images and videos in online albums, weblogs, or in other online sharing services on the Web. You can upload content, save unfinished posts as drafts and continue later, and view the content of the albums. The supported content types may vary depending on the service provider. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Upload files Press , and select Gallery > Images & video, the files you want to upload, and Options > Send > Web upload. You can access the Online sharing application also from the main camera. The Select service view opens. To create a new account to a service, select Options > Add new account or the service icon with the text Create newin the services list. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options> Retrieve services. To select a service, press the scroll key. When you select the service, the selected images and videos are shown in the edit state. You can open and view the files, reorganize them, add text to them, or add new files. To cancel the Web upload process, and save the created post as a draft, select Back > Save as draft. If the uploading has already started, select Cancel > Save as draft. Get started To use Online sharing, you must subscribe to the service with an online image sharing service provider. You can usually subscribe to the service on the Web page of the service provider. Contact your service provider for details on subscribing to the service. For more information on compatible service providers, see www.nokia.com/support/ phones/N72. 43 Camera and Gallery When the order is sent, Order sent successfully is displayed. When you open the service for the first time in the Online sharing application, you are prompted to provide the user name and password. You can access the settings later through Options > Settings in the Online sharing application. See `Online sharing settings', p. 44. Camera and Gallery To connect to the service and upload the files to the Web, select Options > Upload, or press . Online sharing settings To edit the Online sharing settings, in the Online sharing application, select Options > Settings. Open online service To view uploaded images and videos in the online service, and draft and sent entries in your device, in the Images & video folder, select Options > Online Services. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options > Retrieve services. Select a service from the list. After you open a service, select from the following: · Open in Web browser--to connect to the selected service and view the uploaded and draft albums in the Web browser. The view may vary depending on the service provider. · Drafts--to view and edit the draft entries, and upload them to the Web · Sent--to view the 20 latest entries created through your device · New post--to create a new entry The available options may vary depending on the service provider. My accounts In My accounts, you can create new accounts or edit existing accounts. To create a new account, select Options> Add new account. To edit an existing account, select an account and Options > Edit. Select from the following: Account name--to enter a name for the account Service provider--to select the service provider you want to use. You cannot change the service provider for an existing account, you must create a new account for the new service provider. If you delete an account in My accounts, the services related to the account are also deleted from you device, including the sent items for the service. User name and Password--to enter the user name and password you created for your account when you registered to the online service Upload image size--to select the size in which the images are uploaded to the service 44 Display image size--to select the size in which the image is shown on the display of your device. This setting does not affect the upload image size. Display text size--to select the font size used to display text in draft and sent entries, or when you add or edit text to a new entry Advanced Service providers--to view or edit service provider settings, add a new service provider, or view details of a service provider. If you change the service provider, all the My accounts information for the previous service provider is lost. You cannot change the settings of predefined service providers. Default access point--to change the access point used to connect to the online service, select the access point you want. 45 Camera and Gallery Application settings Imaging Imaging Image print To print images with Image print, select the print option in the gallery, camera, image editor, or image viewer. Use Image print to print your images using a compatible USB data cable, Bluetooth connectivity, or a compatible memory card. You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpg format. To print to a PictBridge-compliant printer, select the print option before you connect the USB cable. Select the image you want to print and Options > Print. Nokia Connectivity cable CA-53, the printer is automatically displayed. If the default printer is not available, a list of available printing devices is displayed. Print preview The print preview view opens only when you start printing an image in the gallery or the active standby mode. The images that you selected are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages. Printer selection When you use Image print for the first time, a list of available printers is displayed after you select the image. Select a printer you want to use. The printer is set as the default printer. If you have connected a printer compatible with PictBridge using a compatible data cable, for instance the Print settings The available options vary, depending on the capabilities of the printing device you selected. To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view. 46 Press , and select Imaging > RealPlayer. With RealPlayer, you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card. RealPlayer supports files with extensions such as .aac, .awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this device. Tip! You can transfer music files from your device to a compatible memory card with Nokia Audio Manager available in Nokia PC Suite. See the CD-ROM supplied with your device. Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen mode. Icons in RealPlayer: --Repeat; --Random; -- Repeat and random; and --Loudspeaker muted. Create a track list To create a track list of the music tracks on your device memory or a compatible memory card: 1 Select Options > New track list. 2 Select the memory from which you want to select the music tracks. 3 Enter a name for the track list. 4 Select the music tracks you want to include in the track list. 5 Select Back. The track list automatically starts to play. Tip! To leave the application open and play music in the background, press twice to return to the standby mode. To return to the application, press , and select RealPlayer. Shortcuts during play: Play video or sound clips 1 To play a media file stored in device memory, or on a compatible memory card, select Options > Open and from the following: 47 Imaging RealPlayer Most recent clips--to play one of the last six files played in RealPlayer. Saved clip--to play a file saved in Gallery. See `Gallery', p. 39. 2 Scroll to a file, and press to play the file. · To fast forward, press and hold . · To rewind through the media file, press and hold · To mute the sound, press and hold until is displayed. To turn on the sound, press and hold until you see . Imaging . Receive RealPlayer settings You may receive RealPlayer settings in a special text message from the network operator or service provider. See `Data and settings', p. 57. For more information, contact your network operator or service provider. Stream content over the air Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. The access points may be configured when you first start your device. Contact your service provider for more information. Note: In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer will recognise an http link to a .ram file. To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in the device. Change the RealPlayer settings Select Options > Settings and from the following: Video--to have RealPlayer automatically repeat video clips after they finish playing. Audio settings--to select if you want to repeat playing of track lists and play sound clips on a track list in random order. Connection settings--to select whether to use a proxy server, change the default access point, and set the time-outs and port range used when connecting. Contact your service provider for the correct settings. Proxy settings: Use proxy--To use a proxy server, select Yes. Proxy serv. address--Enter the IP address of the proxy server. Proxy port number--Enter the port number of the proxy server. 48 Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Network settings: Default access point--Scroll to the access point you want to use to connect to the Internet, and press . Online time--Set the time for RealPlayer to disconnect from the network when you pause a media clip playing through a network link, select User defined, and press . Enter the time, and select OK. Lowest UDP port--Enter the lowest port number of the servers port range. The minimum value is 6970. Highest UDP port--Enter the highest port number of the servers port range. The maximum value is 32000. Select Options > Advanced settings to edit the bandwidth values for different networks. automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. Every style has its own font style, color, music, and pace. In a Custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees in a multimedia message. Open Movie, and press or to move between the and views. You can also return to the main view from the view by selecting Done. The view contains a list of video clips that you can Play, Send, Rename, and Delete. Create a quick muvee 1 In the Movie main view, select Quick muvee. 2 Select a style for the muvee from the style list. The created muvee is saved in the Movie director muvee list. The muvee is played automatically after saving. Tip! To download new styles to your device, select Style downlds. (network service) from the Movie director main view. Movie director To create muvees, press , and select Imaging > Movie. Muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created Create a custom muvee 1 In the Movie main view, select Custom muvee. 2 Select the clips you want to include in your muvee in Video, Image, Style, or Music. 49 Imaging After you select video clips and images, to define the order in which the files are played in the muvee, select Options > Advanced options. To select the file you want to move, press the scroll key. Then scroll to the file below which you want to place the marked file, and press the scroll key. To cut the video clips, select Options> Select contents. See `Select content', p. 50. In Message you can add an opening and closing text to a muvee. 3 Select Create muvee and from the following: Multimedia message--to optimize the length of the muvee for MMS sending. Auto-select--to include all the selected pictures and video clips in the muvee. Same as music--to set the muvee duration to be the same as the chosen music clip. User defined--to define the length of the muvee. 4 Select Options > Save. To preview the custom muvee before saving it, in the Preview muvee view, select Options > Play. To create a new custom muvee by using the same style settings, select Options > Recreate. Advanced options > Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. A slider below the video screen indicates the included, excluded, and neutralized parts with colors: green is for included, red is for excluded, and grey is for neutral parts. To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part from the video clip, scroll to the part, and select Options > Exclude. To let Movie director randomly include or exclude a part of the video clip, scroll to the part, and select Options > Mark as neutral. To exclude a shot from the video clip, select Options > Exclude shot. To let Movie director randomly include or exclude parts of the video clip, select Options > Mark all as neutral. Imaging Settings Select Settings to edit the following options: Memory in use--Select where to store your muvees. Resolution--Select the resolution of your muvees. Default muvee name--Set a default name for the muvees. Select content After you select images and video clips for your muvee, you can edit the selected video clips. Select Options > 50