QUICK OPERATION SHEET DVD Receiver Receiver DP2700 STEP 1: Following the diagram below, connect the Yellow, White and Red cables from the back panel of the DVD player directly to the Television correspondingly* Activating P/I (Progressive/Interlace) Mode If your TV has component input terminals (YPRPB or YCbCr), you can connect your TV to this DVD player's component output terminals (YPRPB) using component signal cables (not provided). Please select the YPRPB in the General setup video out - YPRPB in order to obtain a clear picture. Use your TV remote control or control buttons at the front of your TV to select component input as your TV's input signal. Press P/I button on the DVD player's remote control to switch between progressive and interlace mode. Older TV system only supports interlace mode, but newer TV system supports progressive mode. L TV Audio input R TV Video input button is pushed STEP 2: Turn on television. This Norcent DVD Player may be operated either by the buttons on the unit's front panel or by the included remote control. STEP 3:Switch your TV into video input mode. This will be usually a button on your TV remote that is labeled INPUT or TV/VIDEO, Line Input, AV Input or Source. If you have trouble to locate the Video Input Mode button, please consult your TV operation manual. STEP 4: Press the STANDBY/ON button located on front panel of Home theater. STEP 8: Insert the two included "AAA" batteries into remote control. Make sure + and - on batteries match up with + and - inside remote battery compartment. STEP 9: Point remote control at remote sensor located on front panel of player. Note: The remote control is operational at a maximum distance of 21' from sensor at an angle up to 30 either side. PROG SOU RCE STEP 5: Press " OPEN/CLOSE " button. Disc tray will open. STEP 6: Place disc on tray with playback side face down. 30 30 PROG SOU RCE STEP 7: Press " OPEN/CLOSE" button. Tray will close. The player will automatically read the disc and begin playing in approximately five seconds. See the User's Manual for directions on how to operate the unit's many special features, such as the parental lock function. To ensure proper use of this product, it is important that you carefully read the user's manual, especially the information regarding safety and precautionary measures. * If your TV doesn't have Video Cable Input, you need to purchase a RF Modulator from your local electronics retailer.