LM760 LCD MONITOR MANUAL Thank you very much for choosing the Norcent Product. We recommend that you take a few minutes to read carefully through this manual before installing and switching on the product. Please keep this manual in a safe place for your future reference. Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be led as a result if it`s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this monitor does cause serious interference to radio or television reception, resetting the monitor may determine it. Moreover, users are encouraged to correct interference by doing one or more of the following: Reorient or relocate the receiving antenna. Move the monitor and the receiver further away from each other. Connect the monitor into an outlet on a circuit different from that to which the receiver is connected. Consult your local dealer or an qualified technician. FCC Warning To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user`s authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits. EMI Certification The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de class B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. Content Safety Precautions.............................................................................1 First Setup ..........................................................................................2 Front Panel Control..........................................................................3 Installation..........................................................................................3 How to install the Stand .....................................................................4 How to uninstall the Stand .................................................................5 Using OSD Functions ........................................................................6 Technical Information ......................................................................14 Care and Maintenance......................................................................15 Troubleshooting ...............................................................................15 This monitor is manufactured and tested on a ground principle that a user's safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you're unsure of the power supply in your residence, consult your local dealer or power company. Do not try to repair the monitor yourself as it contains no user-serviceable parts. The monitor should only be repaired by a qualified technician. Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock to human bodies, even when the power cord is disconnected. Stop using the monitor if the cabinet is damaged. Have it checked by a service technician. Put your monitor only in a clean, dry environment. Unplug the monitor immediately if it gets wet and consult your service technician. Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen. Keep the monitor away from magnetic objects, motors, TV sets, and transformer. Do not place heavy objects on the cable or power cord. For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and shall be easily accessible. Safety Precautions 1 First Setup Congratulation for purchasing this high performance monitor! This monitor includes the following accessories: Attached video Cable (15 pin D-SUB) Power Cable Audio Cable User Guide Book Quick Installation 1. Connect video cable Make sure both the monitor and computer are powered OFF. Connect the video cable to the computer. 2. Connect power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. 4. Windows users : Setting the Timing Mode (Resolution and Refresh Rate) Example: 1024 x 768 @ 60 Hz Resolution Right-click on the Windows desktop > Properties > Settings > "Desktop Area". Set the resolution. Refresh Rate (vertical frequency) See your graphic card's user guide for instructions. 3. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 2 Front Panel Control ACTIVATE/EXIT OSD SCROLL DOWN/DECREASE SCROLL UP/INCREASE SELECT DESIRED FUNCTION POWER ON/OFF LED INDICATOR Installation POWER AC INLET VIDEO CABLE AUDIO INPUT 3 How to install the Stand (Fig 1) (Fig 2) (Fig 3) (Fig 4) 1. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Then place the monitor flat on a table with front screen facing down (see Fig 1). 2. Unpack the base and mount it onto the swivel neck, remember to align the holes to the hook located underneath the swivel neck (see Fig 2). Slide the base upward until it makes a click sound, indicating the base has being securely fasten (see Fig 3). Place the monitor on an upright position (see Fig 4). 3. 4. 4 How to uninstall the Stand (Fig 1) (Fig 2) (Fig 3) (Fig 4) (Fig 5) 1. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Then place the monitor flat on a table with front screen facing down (see Fig 1). 2. Locate the hook on the stand (see Fig 2). 3. Use one hand to hold the monitor body and the other hand to hold stand, then slowly push the hook up until hearing a click sound (see Fig 3). 4. Hold the monitor firmly with one hand and slide the stand downward with the other hand (see Fig 4). Slide it slowly or you will accidentally damage the monitor and stand (see Fig 5). 5. Then, you have successfully uninstalled the stand. 5 Using OSD Functions 1. 2. 3. 4. 5. Press the button to display the main menu shown below. Press the or button to scroll to the desired menu option. Press the button to select the menu option. Press the or button to select submenu option. After making adjustment, press button to save changes and exit the screen. Main Menu Auto Adjust: Automatically adjusts the horizontal position, vertical position, phase (Fine Tune) and Clock (H. Size). 6 Contrast: To adjust the foreground white level of screen image. 1. Press to increase the contrast. 2. Press to decrease the contrast. Brightness: to adjust the background black level of screen image. 1. Press to increase the brightness. 2. Press to decrease the brightness. Color Temperature: provides four preset color adjustments: 9300K, 6500K, 5400K, and with these changes will improve the 7 brightness and color saturation. 9300K-- Adds blue to screen image for cooler white. 6500K-- Adds richer red to screen image for warmer white. 5400K-- Adds green to screen image for a darker color. Press button to select the preset color. User Color: Individual adjustments for red(R), green (G), blue (B). 1. Press to increase the selected color. 2. Press to decrease the selected color. 3. Press to confirm your adjustments. Information: Displays input signal information regarding the current setting from the graphic card in your computer. Note: If you wish to change your settings please refer to your graphic 8 card user guide for more information. Image Adjust: Allows users to select and adjust the Horizontal /Vertical position, H. Size, Fine Tune and Sharpness. 1. Press or to move the bar up or down to select the function. 2. Press to confirm your selection. H./V. Position: To adjust the horizontal and vertical position of the screen. H. Position: : moves the screen right, : moves the screen left. V. Position: : moves the screen up, : moves the screen down. H. Size: Adjusts the width of screen image. 1. Press to increase the width of the screen. 9 2. Press to decrease the width of the screen. Fine Tune: To adjust the delay time. 1. Press to increase the fine tune. 2. Press to decrease the fine tune. Sharpness: To adjusts the clarity on a non-SXGA (1280x1024) signal. 1. Press to increase the sharpness. 2. Press to decrease the sharpness. Setup Menu: To set language Select, Resolution Notice, OSD position and OSD Time Out. 10 1. Press or to move the bar up or down to select the function. 2. Press to confirm your selection. Language Select: Allows the user to choose from available languages. 1. Press or to move the bar up or down to select the language. 2. Press to confirm your selection. Resolution Notice: If the function is "enable", a message will appear on the screen "For best picture quality change resolution to 1280 x 1024" after 30 seconds Powering ON or when changing resolutions to (640 x 480/ 720 x 400 / 800 x 600/ 1024 x 768). And if the function is "disabled" then the message will not be displayed. 11 OSD Position: Press the button to select the horizontal or vertical OSD position. Horizontal OSD Position will horizontally reposition all OSD screens. Press or to move the OSD Right or Left. Vertical OSD Position will vertically reposition all OSD screen. Press or to move the OSD Up or Down. OSD Time Out: Sets the length of time the OSD screen is displayed before exiting. Memory Recall: Return all adjustments back to factory default settings. Press the button to select the Memory Recall menu option. 12 Audio Menu: Volume: To adjust the speaker output volume. Mute: To select the Mute ON/OFF. Supporting Timing modes VESA MAC VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75 Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 75Hz Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor. 13 Technical Information Technical Specification LCD Panel Power Management 17.0" TFT Energy Star compliant VESA DPMS compatible <2W Displayable Resolution Pixel Dimension LCD Display Color Viewing Angle Tilt Contrast Ratio Brightness Response Time Active Display Area Temperature SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. 0.264 x 0.264 mm 16.2M (6 bits + 2FRC) color 140/130, CR10 -1°, +20° 450 : 1 (typical) 260 cd /m2 (typical) 25 ms. 337.9 mm x 270.3 mm Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance Power Speaker UL, CUL, FCC-B, Energy Star. Input Voltage 1W x 2 AC100-240 V 60/50Hz 1.2A 14 Care and Maintenance Care Avoid exposing your monitor from direct sunlight or other heat source. For better performance and glare reduction please place your monitor away from the sun. Put your monitor in a well ventilated area. Do not place heavy things on top of your monitor. Make sure that your monitor is installed in a clean and moisture-free area. Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Note: 1. Remove the LCD monitor from its package and please remember to take off the plastic bag and Polystyrene Foam. (Please store the original packaging material for future use). 2. Adjustable screen angle is 1º degree leaning forward and 20º degree leaning backward. For packing, please remember to use more force to bend backward but not to exceed 20 º degree range and please make sure to store the monitor into the original package. Caution: Panel exceeding -1º to +20º degree is considered unsuitable and harms will be unpredictable. If you see smoke, hear abnormal noise or smell odor coming out of your monitor, be very cautious you to remove the power cord immediately and call your service center. Never remove the rear cover of your monitor. The display unit contains high-voltage parts and may cause electric shock to human bodies. Never try to repair the monitor yourself. Always call your service center or a qualified technician to fix it. Safety Tips: Troubleshooting No power Make sure A/C power cord is securely connected to the power outlet and the power cord is firmly connected to the monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Power on but no screen image Make sure all signal cables are installed. Make sure the video cable supplied with the monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it. Adjust brightness. 15 Wrong or abnormal colors If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Connect the monitor to another computer to verify if it is monitor problem or computer problem. 16 Norcent Technology, Inc. 550 Cliffside Drive, San Dimas, CA91773 www.norcent.net info@norcent.net support@norcent.net Customer support 909-305-2121