User manual NORCENT LM960

LM960 LCD MONITOR MANUAL Thank you very much for choosing the Norcent Product. We recommend that you take a few minutes to read carefully through this manual before installing and switching on the product. Please keep this manual in a safe place for your future reference. Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be led as a result if it`s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this monitor does cause serious interference to radio or television reception, resetting the monitor may determine it. Moreover, users are encouraged to correct interference by doing one or more of the following: Reorient or relocate the receiving antenna. Move the monitor and the receiver further away from each other. Connect the monitor into an outlet on a circuit different from that to which the receiver is connected. Consult your local dealer or an qualified technician. FCC Warning: To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user`s authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits. EMI Certification The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de class B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. Content Safety Precautions...........................................................................1 First Setup .........................................................................................2 Installation .......................................................................................3 Using OSD Functions ......................................................................4 Technical Information.....................................................................13 Care and Maintenance ....................................................................14 Troubleshooting .............................................................................14 Safety Precautions This monitor is manufactured and tested on a ground principle that a user's safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you're unsure of the power supply in your residence, consult your local dealer or power company. Do not try to repair the monitor yourself as it contains no user-serviceable parts. The monitor should only be repaired by a qualified technician. Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock to human bodies, even when the power cord is disconnected . Stop using the monitor if the cabinet is damaged. Have it checked by a service technician. Put your monitor only in a clean, dry environment. Unplug the monitor immediately if it gets wet and consult your service technician. Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen. Keep the monitor away from magnetic objects, motors, TV sets, and transformer. Do not place heavy objects on the cable or power cord. For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and shall be easily accessible. 1 First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : Video cable with 15 pin D-SUB connector. Power cable. Audio Cable. User guide book. Quick Installation 1. Connect video cable Make sure both the monitor and computer are powered OFF. Connect the video cable to the computer, then to the monitor. 2. Connect power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. 3. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 4. Windows users : Setting the Timing Mode (Resolution and Refresh Rate) Example: 1280 x 1024 @ 60 Hz Resolution Right-click on the Windows desktop > Properties > Settings > "Desktop Area". Set the resolution. Refresh Rate (vertical frequency) See your graphic card's user guide for instructions. 2 Front Panel Control ACTIVATE/EXIT OSD SCROLL DOWN/DECREASE SCROLL UP/INCREASE SELECT DESIRED FUNCTION POWER ON/OFF LED INDICATOR Installation POWER INPUT DVI INPUT 3 AUDIO INPUT VGA INPUT Using OSD Functions Press the button to display the main menu shown below. Press the or button to scroll to the desired menu option. Press the button to select the menu option. Press the or button to select submenu option. 5. After making adjustment, press button to save changes and exit the screen. 1. 2. 3. 4. Main Menu Auto AdjustTo auto adjust the Horizontal Position, Vertical Position, phase (Fine Tune) and Clock (H. Size), please select Auto Adjust from the Main Menu 4 Contrast : To adjust the foreground white level of screen image. Press or button to adjust selected contrast. Brightness : To adjust the background black level of screen image. Press or button to adjust selected brightness. Color Adjust : To provide four preset color adjustments for improving brightness and color saturation: 9300K, 6500K, 5400K, and User Color. Press button to select the preset color. 5 9300K--Adds blue to screen image for cooler white. 6500K--Adds red to screen image for warmer white and richer red. 5400K--Adds green to screen image for a darker color. User Color : Individual adjustments for red (R), green (G), blue (B). 1. Press button to select the desired color. 2. Press or button to adjust selected color. Information : To display the information, regarding the current input signal coming from the graphic card in your computer. Note: See your graphic card user guide for more information about changing the resolution and refresh rate. 6 Image Adjust : To manually adjust the Horizontal /Vertical position ,H. Size, Fine Tune and Sharpness. H./V. Position : To adjust the horizontal and vertical position of the video. H. Position : move screen to the right, : move screen to the left. V. Position : move screen up, : move screen down. H. Size : To adjust the width of the screen image. Press or button to adjust selected H. Size. 7 Fine Tune : To adjust the delay time of data and clock. Press or to adjust to user preference. Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal. Press or button to adjust sharpness. Setup Menu : To set language Select, Resolution Notice, OSD position, OSD Time Out and Input Select (Analog). 8 Language Select : To allow the user to choose from available language. Resolution Notice : There is a OSD message of "For best picture quality change resolution to 1280 x 1024" displayed on the screen after 30 seconds Powering ON or changing mode to lower resolutions (640 x 480/ 720 x 400 / 800 x 600/ 1024 x 768), if the function was "enable". Above message would not display on screen if it was "disable". 9 OSD Position : Press the button to select the horizontal or vertical OSD position. Horizontal OSD PositionTo horizontally replace the OSD position. move OSD to the right, move OSD to the left. Vertical OSD PositionTo vertically replace the OSD position. move OSD up, move OSD down. OSD Time Out : Sets the length of time the OSD screen is displayed before exiting. 10 Input Select : Press Input Select to change Input signal to Analog or Digital. Memory Recall : To return to the factory setting condition, about PictureAudio setting. Press the button to select the Memory Recall menu option. Audio Menu: Volume: To adjust the volume of speaker output. Mute: To select the Mute ON/OFF. 11 Supporting Timing modes VESA MAC VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75 Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 75Hz Warning : Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor. 12 Technical Information Technical Specification LCD Panel Power Management 19.0" TFT Energy Star compliant VESA DPMS compatible <2W Displayable Resolution Pixel Dimension LCD Display Color Viewing Angle Tilt Contrast Ratio Brightness Response Time Active Display Area Temperature SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. 0.294 x 0.294 mm 16.7M (8 bits/color) 85/85/85/85, CR 10 +25°, -0° 500 : 1 (typical) 250 cd /m2 (typical) 25 ms. 376.32 mm x 301.056 mm Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance Power Speaker UL, CUL, FCC-B, Energy Star. Input Voltage 2W x 2 AC100-240 V 60/50Hz 1.5A 13 Care and Maintenance Care Please avoid exposing your LCD monitor from direct sunlight or other heat sources. Put your monitor in a well ventilated area. Do not place any heavy things on top of your monitor. Make sure your monitor is installed in a clean and moisture-free area. Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Note: 1. Remove the LCD monitor from its package and remember to take off the plastic bag and Polystyrene Foam. 2. Pull the base from Parallel versus Panel to Vertical. 3. Adjustable screen angle is 0 degree leaning forward and 25 degree leaning backward. For packing, please bend harder to exceed 20 degree backward in order to reduce storage size. Caution: Panel exceeding 0 to +25 degree is considered unsuitable and harm will be unpredictable. Safety Tips: If you see any smoke, hear any abnormal noise or smell any odor coming out from your monitor, be very cautious to remove the power cord immediately and call your service center. Never remove the rear cover of your monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies. Never try to repair your monitor yourself. Always call your service center or a qualified technician to fix it. Troubleshooting No power Make sure A/C power cord is securely connected to the power outlet and the power cord is firmly connected to the monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Power on but no screen image Make sure all signal cables are installed. Make sure the video cable supplied with the monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it. Adjust brightness. 14 Wrong or abnormal colors If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Connect the monitor to another computer to verify if it is monitor problem or computer problem. 15 Norcent Technology, Inc. 550 Cliffside Drive, San Dimas, CA91773 www.norcent.net info@norcent.net support@norcent.net Customer support 909-305-2121