User manual OLYMPUS D-490 ZOOM

Digital Camera D-490ZOOM Operating Instructions · Before you use this camera, read this manual and then store it in a safe location where you can find it for future use. · We recommend that you spend some time taking test shots and experimenting with all of the features before you take important photographs. © Copyright 2000. Olympus Optical Co., Ltd. All rights reserved. IMPORTANT NOTICES Radio and Televisions Interference Change or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the distance between the camera and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Only the included RS-232C serial cable should be used to connect the camera to a personal computer (PC). Legal and other notices · The contents of this document are subject to change without prior notice. · Although the contents of this document have been carefully checked to avoid errors, some may still occur. If you have a question about any point, or you find mistakes or omissions, please contact us. · No part of this publication may be reproduced or reprinted except for personal use without prior written permission from Olympus. · Olympus makes no representations or warranties regarding any damages, or benefit expected by using this unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product. · Olympus makes no representations or warranties, regarding any damages or any benefit expected by using this unit lawfully, caused by erasing picture image data. Trademarks · IBM is a registered trademark of International Business Machines Corporation. · Microsoft and Windows are registered trademarks of the Microsoft Corporation. · Macintosh is a trademark of Apple Computer Inc. · CompactFlash and CF are trademarks of San Disk Inc. · All other company and product names are registered trademarks of their respective owners. Declaration of Conformity Model Number: D-490ZOOM Trade Name: OLYMPUS Responsible party: Olympus America Inc. Address: 2 Corporate Center Drive, Melville, New York 11747-3157 U.S.A. Telephone number: 631-844-5000 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 2 3 Important Safety Instructions Thank you for purchasing this Olympus digital camera. Before you use your new camera, read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. A lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage points inside the product which could cause a serious electrical shock. An exclamation point enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. 1 Read All Instructions -- Before you use the product, read all operating instructions. 2 Save These Instructions -- Save all safety and operating instructions for future reference. 3 Heed Warnings -- Read carefully and follow all warning labels on the product and all warnings described in the instructions. 4 Follow Instructions -- Follow all instructions provided with this product. 5 Cleaning -- Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. 6 Attachments -- For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. 7 Water and Moisture -- Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement, or swimming pool). 8 Location -- To avoid damage to the product and to avoid personal injury, never place this product on a unstable stand, tripod, bracket, table or cart. Mount only on a stable tripod, stand, or bracket. Follow the instructions which describe how to safely mount the product, and use only the mounting devices recommended by the manufacturer. 9 Power Sources -- Connect this product only to the power source described on the product label. If you are not sure about the type of power supply in your home, consult your local power company. Refer to your operating instructions for information on using the product with batteries. WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT. 4 5 10 Grounding, Polarization -- If this product can be used with an optional AC adapter, the adapter may be equipped with a polarized alternating current line plug, a plug with one blade wider than the other. This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then insert it again. If the plug still fails to fit, contact an electrician and have the receptacle replaced. 11 Protecting the Power Cord -- The power supply cord should be routed so it will not be walked on. Never place a heavy object on the power cord and never wrap the power cord around the leg of a table or chair. Keep the areas around the power cord connection points, at the power outlet and at the product connection, free of all obstacles. 12 Lightning -- If a lightning storm occurs while using the optional AC adapter, unplug the adapter power cord from the wall outlet immediately. To avoid damage from unexpected power surges, always unplug the AC adapter from the power outlet and disconnect it from the camera when the camera is not in use. 13 Overloading -- Never overload wall outlets, extension cords, power strip, or other power connection points with too many plugs. 14 Foreign Objects, Spillage -- To avoid personal injury from fire or electrical shock from contact with internal high voltage points, never insert a metal object into the product. Avoid using the product where there is a danger of spillage. 15 Servicing -- Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points. Important Safety Instructions (continued) 16 Damage Requiring Service -- While using the optional AC adapter, if you notice any of the conditions described below, unplug the AC adapter from the wall outlet and refer servicing to qualified service personnel: a) If liquid has been spilled, or any object has fallen into the product. b) If the product has been exposed to water. c) If the product does not operate normally while following operating instructions. Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product, requiring extensive repair work by a qualified technician to restore the product to normal operation. d) If the product has been dropped or damaged in any way. e) If the product exhibits a distinct change in performance, this indicates a need for servicing. 17 Replacement Parts -- When replacement parts are required, make sure that the service center uses only parts recommended by the manufacturer to ensure that the replacement parts have the same characteristics as the originals. Unauthorized substitution of parts could cause a fire, electrical shock, or create other hazards. 18 Safety Check -- Upon completion of servicing or repairs, ask the service technician to perform safety checks to determine that the product is in good working condition. 19 Heat -- Never use or store this product near a heat source such as a radiator, heat register, stove, or any type of equipment or appliance which generates heat, including stereo amplifiers. 6 7 WARNING! · Keep batteries away from children. · If a child swallows a battery, seek medical attention immediately. · Dispose of lithium batteries promptly and safely in compliance with local laws regarding the disposal of such items. · To avoid causing a fire or minor burns, always handle lithium batteries carefully. · Never attempt to charge the lithium battery, disassemble it, heat it above 212°F (100°C) or incinerate it. · To ensure good contact, wipe the battery with a clean, dry cloth before use. · To avoid short circuiting the +/­ sides of the battery, never handle a lithium battery with a metal tool, tweezers, etc. Ignoring a warning could lead to serious injury or death. CAUTIONS Ignoring a caution could cause minor personal injury, damage to the equipment, or the loss of valuable data. NOTES Notes provide tips or hints about using the product more efficiently and remind you of operational limitations. WARNINGS Important Safety Instructions (continued) Handling Batteries Follow these important guidelines to prevent the batteries from leaking, overheating, burning, exploding, or causing electrical shock or burns. WARNING 1 If you use NiMH batteries, use only Olympus NiMH batteries and the recharging unit recommended for use with these batteries. 2 Never load batteries with their +/­ terminals reversed. Never force batteries into the battery compartment. 3 To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, with soldering, etc. 4 Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects like jewelry, pins, fasteners, etc. 5 Never heat batteries or incinerate them. 6 Never attempt to connect a battery directly to a power outlet, or to a cigarette lighter in a vehicle. 7 If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately. CAUTION 1 Keep batteries dry at all times. Never allow them to come into contact with fresh water or salt water. 2 To prevent batteries from leaking, overheating, or causing a fire or explosion: · Use only batteries recommended for use with this product. · Never heat batteries, incinerate them, or attempt to disassemble them. · Never mix batteries (old and new batteries, charged and uncharged batteries, batteries of different manufacture or capacity, etc.). · Never attempt to charge alkaline or lithium batteries. · Load batteries carefully as described in the operating instructions. Never reverse their polarity when loading. · To prevent a fire or minor burns, inspect batteries carefully before loading. Never load a battery if you notice that the insulation or protective covering is damaged in any way or if the battery cover is warped, even if the batteries are new. 3 If NiMH batteries are not charged within the specified time, stop charging them and do not use them. 4 Before loading, always inspect batteries carefully for leaks, discoloration, warping, or any other abnormality. 5 Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical attention immediately. 6 If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. 7 Never attempt to modify the battery compartment on the camera, never insert anything (other than the recommended battery) into the battery compartment. 8 9 Important Safety Instructions (continued) 1 2 3 4 5 6 7 8 CAUTION Olympus NiMH batteries are intended for use only with Olympus digital cameras. Never use these batteries with any other device. Never subject batteries to strong shocks or continuous vibration. Never mix batteries (old and new batteries, charged and uncharged batteries, batteries of different manufacture or capacity, etc.). Always charge sets of batteries (2 or 4) together. Always charge NiMH batteries before using them for the first time, or if they have not been used for a long period. While the camera is not in use, always remove the batteries to prevent accidental leakage which could damage the battery compartment. Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near a heat source, etc. Batteries may become hot during prolonged use. To avoid minor burns, never remove them immediately after using the camera. Handling the Camera WARNING 1 Use caution when taking flash pictures at close range. When you fire the flash, you must be at least 3 ft. away from the faces of your subjects, especially when taking pictures of infants and small children. Firing the flash too close to the subject's eyes could cause a momentary loss of vision. 2 To avoid damaging your eyes, never aim the camera directly into the sun, or any other extremely bright light source. 3 To avoid causing a fire or explosion, never use the camera in near flammable or explosive gases. 4 Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: · Becoming entangled in the camera strap, causing strangulation. · Accidentally swallowing a battery or small part. · Accidentally firing the flash into their own eyes or into the eyes of another child. 5 To avoid the hazards of fire or electrical shock, store the camera in a cool, dry location where it will not be subjected to high humidity or dust. 6 To avoid minor burns, never cover the flash with your hand when it is fired. Never touch the flash unit after continuous use. The flash unit becomes very hot during continuous operation. 7 If the camera is accidentally dropped in water, or if liquid is spilled into the camera, stop using the camera, allow the camera to dry, and then remove the batteries. Contact the nearest Olympus authorized service center. 10 11 Important Safety Instructions (continued) 1 WARNING During operation of the camera, if you notice any unusual odors, noise, or smoke around the camera, immediately switch the camera off, disconnect the optional AC adapter (if it is connected), and allow the camera to sit idle for a few minutes to allow it time to cool. Take the camera outdoors, away from flammable objects, and carefully remove the batteries to avoid burning your hands. Contact the nearest Olympus service center immediately. Never attempt to disassemble the camera. The internal circuits contain high voltage points which could cause serious burns or electrical shock. To avoid dangerous electrical shock, never hold or operate the camera with wet hands. To avoid damaging the camera or causing a fire, never expose the camera to excessive heat. NOTE Selecting Batteries for Your Camera · This camera can use four AA NiMH batteries, four AA Alkaline batteries, four AA lithium batteries, four AA NiCd batteries, or two CRV3 lithium battery packs. Use of Olympus brand batteries is strongly recommended. · Alkaline battery performance is limited, especially at low temperatures. Using NiMH batteries is recommended. · AA Zinc-carbon batteries cannot be used with this camera. · Always follow the battery recommendations and loading instructions. Incorrectly loading the batteries could cause the batteries to leak or overheating. · When using the camera on battery power at low temperatures, try to keep the camera and extra batteries as warm as possible. Batteries which run down at low temperatures may be restored after they are warmed at ambient temperature. · Perspiration or oil from your hands on the battery contacts could prevent them from operating. Before loading batteries, wipe the terminals with a dry, clean cloth. · Before going on a long trip, especially before traveling abroad, purchase an ample supply of extra batteries. The recommended batteries may be difficult to obtain while traveling. · Always recharge NiMH or NiCd batteries with a charger recommended for use with these batteries. · Before using NiMH or NiCd batteries, always read the instructions provided with purchase of these batteries. · To avoid personal injury or damage to the camera, always inspect batteries before loading. If you notice leaking, damage to the battery cover or insulation, discoloration, warping or any other abnormality do not use the batteries. · Recommended temperature ranges for NiMH batteries: Operation..................................... 32° ~ 104°F Charge......................................... 32° ~ 104°F Storage ........................................ ­4° ~ 86°F · Using, charging, or storing the batteries outside these ranges could shorten battery life or affect battery performance. Always unload the batteries from the camera before storing the camera and batteries for a long period. 2 3 4 Camera Care and Storage HANDLING · Never store or use the camera for long periods in locations subject to direct sunlight, high humidity, extreme variation in temperature, or strong shocks and constant vibration. Protect the camera at all times from dust and sand. · Never store the camera near any type of appliance or equipment which generates high temperatures, low temperatures, high or low humidity, or a strong magnetic field. Never use the camera in a factory or laboratory where flammable gases are present. · Never shake the camera or subject it to shock or strong vibration. · To avoid damaging its precision lens, never leave the camera pointing directly into the sun. · Before storing the camera for a long period, remove the batteries. Select a cool, dry location for storage to prevent condensation or mold from forming inside the camera. After storage, test the camera by pressing the shutter release button to make sure that it is operating normally. · When the camera is mounted on a tripod, adjust the tripod head to reposition the camera; do not twist the camera. · Never touch the flash after it has been fired. Avoid using the flash for extended periods. Allow it to cool occasionally between shots. · To avoid injury from electrical shock, never attempt to disassemble or modify the camera in any way. 12 13 Contents Main Features ................................................................................................17 Using this Manual...........................................................................................18 Chapter 4 Taking Better Pictures...........................................58 Points to Remember.......................................................................................58 Viewfinder Discrepancies Depending on Distance ....................................58 Subjects Difficult to Get in Focus...............................................................58 When Not Able to Focus on a Subject While Shooting..................................60 Focus on the Subject in Advance ..............................................................60 Using Fixed Focus ....................................................................................61 Using the Flash ..............................................................................................63 Switching Between Flash Modes...............................................................63 Auto-Flash..................................................................................................64 Red-eye Reduction ....................................................................................65 Fill-in Flash.................................................................................................65 Slow Sync ..................................................................................................66 Red-eye Reduction + Slow Sync ...............................................................66 Off (Flash Override) ...................................................................................67 Taking Close-up Pictures (Macro Mode)........................................................68 Enlarging the Subject (Digital Telephoto Mode) .............................................69 Self-Timer.......................................................................................................70 Chapter 1 Getting Started .........................................................20 Checking the Contents ...................................................................................20 Names of Parts ..............................................................................................21 Attaching the Strap.........................................................................................25 Inserting the Batteries ....................................................................................26 Using the AC Adapter (sold separately).........................................................29 Inserting the SmartMedia Card......................................................................30 Setting the Date and Time .............................................................................31 Adjusting the Viewfinder.................................................................................33 Chapter 2 Learning the Basics ...............................................34 Turning the Power On ....................................................................................34 Checking the Control Panel............................................................................35 Is the SmartMedia card inserted? .............................................................35 Checking the Batteries...............................................................................36 Does the Card Have Enough Room for More Pictures? ...........................36 Holding the Camera .......................................................................................38 Shooting Technique Depends on Distance to the Subject .............................39 Taking Still Photos..........................................................................................40 Taking Photos Using the Viewfinder ..........................................................40 Taking Pictures...........................................................................................41 Taking Photos Using the Monitor...............................................................42 Enlarging Your Shots (Optical Zoom) .............................................................44 Taking Photos Using the Flash ......................................................................45 Checking Your Still Photos .............................................................................46 Turning the Power Off ....................................................................................47 Chapter 3 Playing Images Back ...........................................48 Getting Started ...............................................................................................48 Turning the Power On in the Playback Mode.............................................48 Turning the Power Off in Playback Mode...................................................49 Displaying Images Frame by Frame...............................................................50 Displaying All Frames (Index-Display Setting) ...............................................51 Checking the Focus by Enlarging a Selected Picture (Displaying Close-ups)...............................................................................53 Connecting to a Television Set .......................................................................54 To Avoid Accidentally Erasing Pictures You Want to Keep (Photo Protection) ......................................................................................55 One-Frame Erase...........................................................................................56 Chapter 5 Advanced Shooting Techniques...................72 Functions of the Shooting Menu ....................................................................72 Using the Shooting Menu...............................................................................74 Correcting Image Brightness (Exposure Compensation)...............................76 Spot Metering (Placing Priority on Screen Center Brightness) .....................78 Photo Preferences: Picture Quality vs. Picture Quantity (Record Mode).......80 White Balance (Adjusting the Tone) ...............................................................82 ISO Light Sensitivity Level (Setting ISO Sensitivity) ......................................84 Taking Sequential Shots (Drive).....................................................................86 Taking Movie Pictures (Shooting Movies) ......................................................88 Creating Panoramic Pictures (Card Function) ...............................................91 Sharpness (Avoiding Sharp Silhouettes) .......................................................94 Changing How File Names are Assigned (File Naming) ...............................96 Turning Off Warning Sounds (Beep Sound)...................................................98 To Retain Settings Even After Power is Turned Off (Settings) .......................99 Chapter 6 Advanced Playback Techniques ...............100 Functions of the Playback Menu ..................................................................100 Using the Playback Menu ............................................................................102 To Play Back Movie Pictures (Movie playback)............................................104 To Play Back Still Images One by One (Automatic Playback) .....................106 To Change the Number Display (Number Display) ......................................107 To Edit Out Excess Frames from the Beginning or End of a Movie Picture (Function).....................................................................................108 To Erase All Images (All Erase Frames)..................................................... 110 To Initialize a Card (Formatting).................................................................. 111 To Change the Catalog Frame Number (Index Display)............................. 113 14 15 Contents (continued) To Adjust Monitor Brightness (Monitor Adjustment) ................................... 114 Main Features · With its high-resolution CCD (total 2,110,000 pixels) and the highperformance lens, the Olympus CAMEDIA digital camera produces the best picture quality in its class. · The 3x zoom lens together with the 2.5 digital telephoto mode offers an impressive 7.5x maximum zoom. · Olympus high-recording mode lens equals those found on single lens reflex cameras. · The removable SmartMedia card system gives you a hassle-free way to take as many photos as you want. · In addition to still photos, it is also possible to shoot movie pictures and play back images (p.88, p.104). · Using the NTSC video output connector, you can view images on a television screen (p.54). · Using the print reserve function, pictures can be automatically printed on DPOF (Digital Print Order Form) printers, or at conventional photo laboratories. · In addition to the optical viewfinder, you can also use the 1.8-inch monitor as a viewfinder (p.39, p.42). · The monitor image can be enlarged 3x during playback to verify picture quality (p.53). · Exposure compensation (p.76), spot metering (p.78), and other functions are simple using our easy menu operations. · The SmartMedia card can be written faster than with previous models, D-400ZOOM series, thus reducing the possibility of missing important shots. · The battery power, light weight, and compact size make this camera extremely portable. Chapter 7 Printing ........................................................................ 116 To Have Your Pictures Printed .................................................................... Printing the Date and Time on Your Photos................................................ Selecting an Image to Be Printed (Print reserve) ....................................... Printing with the Olympus Photo Printer for Digital Cameras..................... 116 117 119 121 Chapter 8 Processing Photo Images with a Computer ....................................................................................... 122 Installing Provided Software ....................................................................... Transferring Picture Data to a Computer .................................................... Transferring Picture Data with a Computer SmartMedia Card Adapter ...................................................................................... Loading with a Floppy Disk Adapter....................................................... Transferring Data with A SmartMedia Reader/ Writer ............................ Connecting your Camera to a Computer with a Computer Cable .............. Computer Operating Environment.......................................................... Connecting your Camera to a Computer................................................ Computers Requiring a Conversion Connector...................................... Loading Images with CAMEDIA Master 2.0 ............................................... Using CAMEDIA Master 2.0: Introduction .................................................. Making Dark Images Brighter................................................................. Correcting Blurry Images........................................................................ Composing Images with Templates........................................................ 122 122 122 123 123 124 124 124 126 127 128 128 128 129 Appendix............................................................................................. 130 Answers to Frequently Asked Questions .................................................... Troubleshooting (Check before Taking in for Repair) .................................. Operating Problems................................................................................ Picture Problems .................................................................................... Error Codes................................................................................................. Using the Camera with Optional Equipment............................................... Optional Items............................................................................................. Notes on Display and Backlight .................................................................. Specifications .............................................................................................. Index ........................................................................................................... 130 132 132 134 136 137 138 138 139 141 16 17 Using this Manual This manual is divided into eight chapters and one appendix which cover the main unit (hereafter called "the camera"). Chapter 8 Processing Photo Images with a Computer Using the CAMEDIA Master 2.0, images can be sent to a computer, where further processing is possible. This chapter introduces the main features of the CAMEDIA Master 2.0. Chapter 1 Getting Started Details confirming the contents of the box, the names of all the parts of the camera and preparing the camera to be used for the first time are all explained in this chapter. It is essential to read this before using the camera for the first time. Appendix You will also find a troubleshooting guide and explanations of the key technical specifications. Chapter 2 Learning the Basics Basic operations of the camera are explained, including turning on the power, shooting a still image, checking that image and turning the power off. Reading this chapter will make taking pictures with this camera easy and enjoyable. Be sure to read this section. Additional information The followings may appear at the bottom of each page. CAUTION: These sections contain important precautions. Be sure to read. HELP: These sections include information and helpful hints on how to handle problems that may arise during operation. NOTE: These sections contain tips which are good to know in advance. Chapter 3 Playing Images Back After taking a few images and putting together some finished photos, you will probably want to connect the camera to a television to view them on the big screen. This chapter explains how to turn the power on for playback, view the images, and turn the power off. Read this after you've taken a few practice pictures as explained in Ch. 2. Chapter 4 Taking Better Pictures This chapter explains how to focus the camera, as well as how to use the flash feature and shutter release button properly in order to take great pictures. Read this after you have familiarized yourself with Ch. 2 and taken several pictures with the camera. Chapter 5 Advanced Shooting Techniques All the functions for capturing moving images, as well as using various advanced shooting features, are explained in this chapter. Refer to each of these functions as needed. Chapter 6 Advanced Playback Techniques Playing back and editing movie images, as well as other useful display functions, are explained in this chapter. Refer to each of these functions as needed. Chapter 7 Printing Images from SmartMedia cards can be printed either on DPOF (Digital Print Order Form) printers or in conventional photo laboratories. Pre-selecting images in the camera and setting them to date print before processing is explained in this chapter. Refer to this chapter as needed. 18 19 Chapter 1 Getting Started Checking the Contents Camera SmartMedia (8MB) Names of Parts Camera 12 34 5 Static-free case Strap 1 Getting Started Video cable SmartMedia instructions 7 6 9 0 Standard RS-232C interface D-SUB 9-pin connector Write-protect adhesive seals (4 pieces) 8 BA Conversion connector for Macintosh Index lables (2 pieces) Made in Japan Made in Japan CR-V3 lithium battery pack (2 packs) Instructions / Warranty agreement Software CD 1 2 3 4 5 6 7 8 9 0 A B Zoom lever (p.44) Shutter release button (p.40) Control panel (p.23) Self-timer signal lamp (p.70) Flash (p.45) Lens Lens barrier (p.34) Card compartment cover (p.30) Connector cover Video output connector (p.54) Computer connector (p.125) AC adapter connector (p.29) 20 21 Names of Parts (continued) C DEF Viewfinder 1 2 1 Autofocus mark (p.60) / Backlighting correction mark (p.64) 2 Orange lamp (p.45) 3 Green lamp (p.40) L G H I 3 Control Panel 1 Getting Started K J 12 D 3 45 M C D E F G H I J K L M N N 6 7 B A @9 8 Viewfinder (p.58) Flash mode button (p.63) / Erase button (p.56) Self-timer (p.70) / Print button (p.117) Macro / Digital telephoto button (p.68/69) Write-protect button (p.55) Monitor button (p.31) Menu button (p.31) Arrow pad (p.31) OK button (p.32) Monitor (p.42) Diopter adjustment dial (p.33) Battery compartment cover (bottom) (p.26) Tripod socket (bottom) C 1 2 3 4 5 6 7 8 9 = A B C D Macro mode mark (p.68) Exposure compensation mark (p.76) Flash mode (p.63) White balance mark (p.82) Record mode (p.80) Sharpness (p.94) ISO mark (p.84) Remaining picture count (p.37) Write mark (p.41) Battery check (p.36) Card error (p.136) / Card function (p.91) Self-timer (p.70) Sequential shooting (p.86) Spot metering mark (p.78) 22 23 Names of Parts (continued) Attaching the Strap Monitor 1 A 2 SQ 2.5m/8ft SLOW 3 0 9 12. 23. '00 23:45 122 4 5 1 Getting Started 8 1 2 3 4 5 6 7 8 9 0 A Protect mark (p.55) Record mode (p.80) Quick focus (p.61) Flash (p.63) Self-timer (p.70) Remaining picture count (p.37) Memory gauge (p.42) Frame number (p.107) Time (p.31) Date (p.31) Battery check (p.36) 6 7 1 Attach the strap to the camera. CAUTION · Attach the strap exactly as shown in the diagram. If the strap is attached incorrectly the camera may come loose and fall off. In this case, Olympus will not be responsible for any damage. 24 25 Inserting the Batteries CAUTION This camera uses four AA (R6) alkaline, NiMH, lithium or NiCd batteries. It can also take two CR-V3 lithium battery packs (Olympus LB-01). Do not mix different types of batteries or insert the batteries facing in the wrong direction. Do not use manganese batteries, as they may overheat and cause fatal damage to the camera. · The CR-V3 (Olympus-brand LB-01) lithium battery packs are not rechargeable. · Make sure that the camera power is off before inserting the batteries. · Alkaline batteries deliver markedly inferior performance, especially in cold weather. For this reason, we highly recommend using NiMH batteries or lithium battery packs. · Do not use Zinc-carbon batteries. Please read battery warnings. · Do not to touch the inside of the empty battery compartment. · If the camera is left for one hour with the batteries removed and the optional AC adapter disconnected, all camera settings will revert to their initial settings. * See "Handling Batteries" on page 8~10. WARNING Batteries with any part of the outer seal (electrical insulation sheath) peeling off, or any battery split along the seam, can leak, generate heat, or explode. Never use damaged batteries in the camera. Store-bought batteries occasionally may be defective, with all or part of the magnetic insulation sheath peeling off. Never use batteries in this condition. 2 1 Make sure the power is off. · The lens barrier must be closed. · Make sure the monitor and the control panel are off. Slide the battery compartment cover to the side and lift it up to open. Insert the batteries as shown in the diagram. · When using the lithium battery packs, insert them so the "CAMEDIA" label on each battery is facing the lens side of the camera. With the battery compartment cover closed, press the tab and slide it over into the locked position. · If the battery compartment cover seems hard to close, do not force it. Slide the battery compartment cover toward "OPEN" while pressing down to close. 1 Getting Started 3 2 3 Using AA (R6) alkaline batteries 4 Using lithium battery packs 4 26 27 Inserting the Batteries (continued) Using the AC Adapter CAUTION (sold separately) These batteries cannot be used: Batteries with all or part of the electrical insulation sheath peeled off. The camera may be operated on ordinary (AC120V) household current from a wall outlet by using the optional AC adapter (sold separately). · Olympus 3V adapter cannot be used with this unit. AC wall outlet The negative electrode (minus terminal) is flat and only partially covered by the seal (electrical insulation sheath). NOTE · When in use for long periods of time the AC adapter may heat up slightly. This is normal. AC adapter connector 1 Getting Started AC adapter Part of the negative electrode is protruding although not covered by the seal. WARNING Incorrect use may result in fire, electric shock or burns to the skin. · · · · Make sure that the camera is used only with AC120V electric current. Make sure the AC adapter is properly plugged into the outlet. Never plug in or unplug the AC adapter with wet hands. In the unlikely event that the AC adapter cord becomes hot, or you see or smell smoke, unplug it immediately and discontinue use. Contact your Olympus dealer or an authorized Olympus service center for assistance. Do not use any adapter other than the Olympus adapter. Using a different adapter can damage the camera or the power source, or cause other malfunctions. Olympus will not be responsible for damage caused by the use of other AC adapters. When unplugging the AC adapter always grasp the body, not the cord of the adapter. Do not pull, bend, twist or modify the cord. If the cord is gouged or otherwise damaged, stop using the adapter and contact your nearest authorized Olympus service center. When connecting or disconnecting the AC adapter, always make sure that the camera is turned off. Always unplug the adapter when the camera is not in use. The negative electrode (the minus surface) is flat and not covered by the seal. · · · · · · 28 29 Inserting the SmartMedia Card Always insert a SmartMedia card (hereafter called "card") before taking pictures. Setting the Date and Time If the batteries are removed from the camera or allowed to lose their charge, date and time settings will fail and must be reset. Make sure the date and time settings are correct before taking important pictures. 1 Make sure the power is off. · The lens barrier must be closed. · Make sure the monitor and the control panel are off. 2 1 1 Make sure the lens barrier is closed and SmartMedia is inserted, then press the monitor button. · The screen will be displayed on the monitor. Press the menu button. · The playback menu will be displayed on the monitor. Press the arrow pad or to move the on-screen arrow to date setting, then press . · The date setting screen appears. Press the arrow pad or to select how you want the date displayed: MDY (Month/Day/Year) DMY (Day/Month/Year) YMD (Year/Month/Day) After making your selection, press . · The indication moves to first date value. 2 2 3 Open the card cover. Insert the card as shown in the diagram. Insert Special Function SmartMedia cards (sold separately) in the same manner. · Use 3V (3.3V) cards only. 5V cards cannot be used with this system. · Olympus brand cards are recommended, but nonOlympus brand cards may also be used. · When using non-Olympus brand cards, formatting in the camera is recommended (p.111~112). Close the card compartment cover so it clicks into place. END 1 Getting Started 3 2 3,4 Monitor (Playback menu) [1 / 2 ] [ [ 3 Insert the SmartMedia card No. FAST ] FRAMENo. ] 1. 1. '00 0:00 CHANGE 4 4 CAUTION · Never open the card cover, eject the card, remove the batteries, or disconnect the AC adapter while the camera power is turned on. Doing so may destroy the image data on the card. Destroyed images cannot be recovered. · The card is a precision instrument. Do not subject to it excessive force or shock. · Do not touch the gold portion of the card. ­M­­ D­­ Y­ 1. 1. '00 0: 00 BACK SET OK 30 31 Setting the Date and Time (continued) Adjusting the Viewfinder Adjust the viewfinder to the most comfortable position for you. 5 Press the arrow pad or to set the first number, then press . · The indication moves to second date value. Repeat the process until the date and time are set. · The year 2000 is displayed as "00". 1 1 6 Slide the lens barrier open until it clicks. · The power turns on and the lens extends. While looking through the viewfinder, gently turn the diopter adjustment dial. Stop turning the dial when the autofocus mark is clearly visible. You are ready to take some photos. · See Chapter 2 (p.34). To turn the power off, see "Turning the Power Off" (p.47). 7 Monitor (Date setting screen) 5,6 7 2 Diopter adjustment dial 1 Getting Started 1. 1. '00 0 : 00 BACK SET OK Turn the counter to 00, then press the OK button twice to save the settings. · When the date and time are set the playback menu goes off. 2 3 4 Viewfinder To cancel the date setting Press the menu button instead of the OK button in step 7 above. 3 NOTE · Until you change it, the date setting will remain current even when the power is turned off. Autofocus mark 32 33 Chapter 2 Learning the Basics Turning the Power On Slide the lens barrier open. Checking the Control Panel Is the SmartMedia card inserted? If you forget to insert the card, or if there is any other problem with the card, the monitor will automatically light up and display a message. Read the message and correct the problem. 1 Record mode Control panel Slide the lens barrier open until it clicks. · This turns the power on in shooting mode and extends the lens. · The information in the diagram on the left appears on the control panel. · To turn off the power, see "Turning the Power Off" (p.47). · The battery check level goes off automatically after about a few seconds. Monitor When the "NO CARD" error message is displayed: · The card may not be inserted properly. · Turn the power off (p.47). Then remove and re-insert the card. For other error messages: · Follow the directions on the monitor. For details, see "Error Codes" (p.136). When the card setup screen is displayed: · You have inserted a card which needs to be formatted. For details, see "To Initialize a Card" (p.111~112). 2 Learning the Basics Remaining picture count Battery check If the flash closed, the Standby mode If the camera is left untouched for three minutes it automatically switches to standby mode and the control panel goes off. You may reactivate it to full power in any one of the following ways: · Gently press the shutter release button or zoom lever. · Close the lens barrier (p.47), then reopen it. The camera will turn off completely after about four hours of being not used. Close then reopen the lens barrier to turn the camera back on. When using new batteries, it may take longer for the camera to shut down automatically depending on the type of batteries being used. mark goes on. YES NO ENTER OK CAUTION · Never open the card compartment cover, remove the card or batteries, or disconnect the AC adapter while the camera is in operation as this could result in damage to the data stored on the card. 34 35 Checking the Control Panel (continued) Checking the Batteries When the power is turned on with the camera in shooting mode on (with the lens barrier open), the approximate remaining battery power is displayed on the control panel. Control panel · · lights and turns off automatically. Batteries are OK. You can shoot. Remaining picture count Approximate storable still pictures If the count drops to 0, the camera beeps, the green lamp blinks and the monitor displays the message "CARD FULL". This will repeat every time the power is turned on (p.136). The number of storable pictures varies depending on the record mode. 2 Learning the Basics HQ SHQ 1600×1200 HQ 3 7 16 31 64 128 SHQ 1 2 5 11 22 45 SHQ-TIFF 0 0 1 2 5 11 blinks and other indicators on the control panel are displayed normally. Battery power is low and batteries should be replaced. Record mode Resolution SQ 640×480 SQ 20 40 82 165 331 665 SQHIGH 7 16 32 66 132 266 SmartMedia capacity blinks and goes off after about 10 seconds, and other indicators on the control panel go out. Batteries are dead and should be replaced immediately. 2MB 4MB 8MB 16MB 32MB 64MB NOTE · Keep spare batteries on hand when using the camera for long periods of time, when traveling, in cold weather or for important occasions. · NiMH batteries have a shorter life than lithium batteries. · When using NiMH batteries, the low battery warning appears early. Approximate maximum movie lengths, in seconds Record mode HQ SQ Resolution 320×240 160×120 SmartMedia capacity 2MB 5 25 4MB 11 51 8MB 23 104 16MB 48 211 32MB 96 424 64MB 193 851 CAUTION · When the camera power is on, the camera may beep continuously immediately after the power has been turned on or after taking a picture. The frame number on the control panel may blink. This indicates that battery power is low. The camera will not work properly and the batteries should be replaced. * A limited number of seconds can be shot at one time. CAUTION · The number of storable stills and the movie length may vary depending on the data volume required for the subject being photographed. · In some cases the number of storable pictures counter may not decrease every time a picture is taken, nor increase when a frame is erased. · When the number of storable pictures exceeds 999, all items on the control panel will display "999", but more accurate numbers will be displayed on the monitor. Does the Card Have Enough Room for More Pictures? When the power is turned on with the camera in shooting mode (with the lens barrier open), the control panel displays a remaining picture count. 36 37 Holding the Camera Proper camera technique Hold the camera firmly with both hands, keeping your elbows at your sides. When holding the camera vertically, make sure the flash is on top. Shooting Technique Depends on Distance to the Subject Deciding whether to use the viewfinder or the monitor display to set up a shot depends on the distance between you and your subject. Determine the approximate distance before taking the photo. Horizontal grip Vertical grip For snapshots and long-range photography (from approx. 59 to ): We recommend using the viewfinder (p.40). For close-ups (from 31 to approx. 59): Although you can use the viewfinder to take pictures, in some cases it is better to use the monitor (p.42). See below for details. 2 Learning the Basics For extreme close-ups (8 ~ 31): We recommend using the macro mode (p.68) for taking pictures extremely close-up. Although it is possible to take such shots without using the macro mode, determining proper exposure and focus is much more difficult. Incorrect! Characteristics of the viewfinder and the monitor You can use either the monitor or the viewfinder to determine the proper shooting range. Consider the following when deciding whether to use the viewfinder or the monitor for a particular shot: Viewfinder Keep your fingers and the strap away from the lens and flash. Advantage: You can check the proper subject composition with less camera movement. Disadvantage: Close-up photography causes inconsistencies between the picture frame as seen in the viewfinder and the actual edge of the photo (p.58). NOTE · Do not subject the lens to physical shocks. Monitor Advantage: You can check the subject composition more accurately. Disadvantage: It is more difficult to hold the camera steady, and battery life is decreased. 38 39 Taking Still Photos Taking Photos Using the Viewfinder Half-press Taking Pictures Full-press 1,2 1 1 2 1 2 Compose the photo inside the viewfinder. Press the shutter release button halfway down until the green lamp next to the viewfinder lights up (half-press). · The focus and exposure are automatically set. · If the green lamp blinks, the camera is out of focus. Take your finger off the shutter release button and half-press it again. Press the shutter release button all the way down (full-press). · Press the shutter release button gently. If you press it too hard, the camera will move and blur the shot. · The shot is taken and the camera beeps. · The green lamp next to viewfinder blinks for a few moments, and it goes off. To take another picture, compose the shot and full-press the shutter release button. · If you attempt to take a picture before the green lamp goes off, the camera does not beep but you still cannot take the picture. Wait for a few seconds and make sure the green lamp goes off before taking another shot. · To turn the power off, see "Turning the Power Off" (p.47). 2 Learning the Basics 2 Shutter release button Viewfinder Autofocus mark Shutter release button CAUTION · Never open the card compartment cover, remove the batteries or card, or disconnect the AC adapter while the green lamp and write mark are blinking. This could damage the pictures you have already taken, as well as the one currently being written to the card. HELP § Go on to "Taking Pictures" on the following page. · The area of the actual photo will be slightly larger than the shot appears through the viewfinder. · If the write mark is blinking, this indicates that the image is being processed. You cannot depress the shutter release button while the write mark is blinking. · If you switch the beep function off (p.98), the camera will not beep after taking a picture. In this case you must watch the green lamp. If the lamp blinks, the picture was taken successfully. Green lamp 40 41 Taking Still Photos (continued) NOTE · Depending on the record mode, it takes between 2 and 40 seconds to write the image to the card. · The time you have to wait and the number of storable pictures varies depending on the record mode. HELP · Taking pictures using the monitor takes more time to write to the card than when using the viewfinder. · A subject taken at an angle may appear grainy on the monitor, but this will not affect the quality of the actual photo. · Vertical lines may appear on the monitor when taking pictures in full sunlight or other brightly-lit areas. These lines will not be visible in the actual photo and do not indicate a camera malfunction. · The picture frame of the actual photo will be slightly larger than it appears on the monitor. Taking Photos Using the Monitor 1 1 2 3 Press the monitor button. · The monitor goes on. Compose the shot using the monitor. The procedure for taking photos is the same as when using the viewfinder (p.40 ~ 41). · The memory gauge is displayed while the write mark is blinking. · You cannot take a picture while the memory gauge is at "full". The gauge level should drop after a few seconds. NOTE · Do not push the monitor forcefully. · The viewfinder is intended to be used to check photo composition. Use the monitor for checking focus and exposure. For best results, transfer image files to a computer to confirm exactly what final pictures will look like (p.54, p.122). 2 Learning the Basics 2,3 Monitor Memory gauge Shoot Shoot Wait Before shooting Writing to card Wait Cannot shoot Memory gauge 42 43 Enlarging Your Shots (Optical Zoom) Taking Photos Using the Flash In low light situations, open the flash in advance. Use telephoto (T) to zoom in on a subject so it appears larger. Use wide angle (W) to capture a wider area. Push the zoom lever toward W (Wide angle) to shoot wide-angle shots. Pull the zoom lever toward T (Telephoto) to zoom in. Orange lamp Viewfinder When the flash is needed If the shutter release button is half-pressed, the orange lamp next to the viewfinder will blink. In this case you need to use the flash. Open the flash in advance. 1 Viewfinder Flash 1 Place your finger on the edge of the flash housing and pull it up. · If the orange lamp next to the viewfinder lights up when the shutter release button is halfpressed, the flash will go off when the shutter release button is full-pressed. 2 Learning the Basics NOTE · You can take pictures of up to 7.5x using the digital telephoto mode function (p.69). Flash working range The flash working range is adjusted by using the zoom lever. Wide-angle mode: Approx. 8 ~ 13 Telephoto mode: Approx. 8 ~ 8.5 Within an approximate range of 8 to 31, the flash will also work in the macro mode (p.68). 44 45 Checking Your Still Photos You can check any of the photos you have taken. Turning the Power Off 1 If the flash is open, close it. Close the lens barrier halfway (just until it touches the lens). · Do not push the lens barrier against the lens. · The lens will recess into the camera. Wait until the lens fully retracts, then close the lens barrier the rest of the way. · The control panel display goes off and the power turns off. 1,3 1 With the camera in shooting mode (the lens barrier open), quickly press the monitor button twice. · The camera switches to playback mode and the monitor displays the most recent photo taken. · If no photos have been recorded on the card, the monitor will show "NO PICTURE." Check other images recorded by pressing the arrow pad. : Displays the previous image. : Displays the next image. : Displays the 10th image back. : Displays the 10th image ahead. Press the monitor the button. The camera returns to shooting mode. 1 2 2 3 2 Learning the Basics 2 2 3 NOTE · Stored images will not be lost when the power is turned off or when the batteries are replaced. Press 3 Taking a picture while checking previous images You can take a photo even while checking previous images on the monitor. To do this, look through the viewfinder and full-press the shutter release button (p.40~41). The image will be recorded immediately. 46 47 Chapter 3 Playing Images Back Getting Started Turning the Power On in the Playback Mode HELP · After turning the power on, the monitor may flash and display an image after 0.5 to 2 seconds. This is not a malfunction. 1 2 Make sure the lens barrier is closed. Press the monitor button. · The camera turns on in playback mode and the monitor displays the last image taken. · "NO PICTURE" is displayed on the monitor if no pictures have been taken. Any problems with the card are indicated on the monitor (p.55). · The battery check mark blinks when the batteries are running low. Turning the Power Off in Playback Mode