Digital Recorder Accessories Digital Recorders from Omnicron come with cables & accessories suitable for most installations. The items on this page are for replacement of the supplied cables, or applications requiring different cables or adapters. Contact your Omnicron sales representative for assistance in selecting accessories, cables, or adapters for your application. Voice Logging Recorders and accessories have been our specialty since 1975. TSA-3LM The easiest way to monitor conversations on individual telephones. The TSA-3LM is used to provide a simple method of connecting supervisory monitoring equipment to telephone handset or headset audio. It can be used with most telephone styles that have a standard modular handset or headset jack. Simply connect one end of the cable in series with the telephone handset or headset cord and plug the other end of it into your recorder. The TSA-3LM has a 25' output cable that can be extended with the T25-EXT. Adapter for mixing two-way radio receive and transmit audio. The RSAM3 is used to provide an inexpensive method of connecting voice logging recorders to twoway radio base stations and local control points. Input levels are compatible with Motorola Radius series radios or similar. . RSA-M3 B T-18 Telephone cable with RJ-11 plugs on both ends. This multi-purpose cable assembly can be used to connect between two RJ-11 or RJ-14 phone jacks. It is 18' long and comes with a T adapter. The T adapter is used when you do not have an extra jack for the cable connection. It will convert a single phone jack into two parallel jacks. The RSA-M3 combines receive and transmit audio at levels matched to the line input of voice logging recorders. It also provides transformer isolation and RF bypass. Use it to simplify installation when a direct connection to the radio's receive and transmit audio will be made by a radio service technician. The RSA adapters are not needed when connecting to remote controlled radios (tone, DC, or local). TSA-CHH Similar to TSA-3LM. Used to provide an inexpensive method of connecting supervisory monitoring equipment (such as our Total Recall) to a telephone that uses built-in switching between handset and headset jacks. It combines the audio to a single 25' output so that you will be able to monitor or record conversations from both the handset and headset. Twenty-five foot phone line extension cable. It has an RJ-11 plug on one end and an RJ-11 jack on the other end. It is used to extend a phone jack or connection. T25-EXT Two-way radio adapter with a relay that switches between receive and transmit audio. Similar to RSA-M3 (above), the RSA-M4 has a relay that connects to 12vDC transmitter power and an audio transformer to boost the volume of transmitter audio that is fed to the recorder. The relay is used to switch its RJ-11 audio output jack from receive audio to transmit audio whenever the radio is transmitting. Installation by a radio service technician is required. RSA-M4 RJ14-S Two line cable assembly. The RJ14-S is used to separate two line RJ-14 phone jacks (L1+L2) into individual RJ-11 jacks or plugs. It can also be used to combine two phone lines from two separate RJ-11 jacks or cables onto a single RJ-14 plug. Telephone supervisory adapter with switch. The TSA-SLM provides all of the functions and features of the TSA-3LM with the addition of an ON/OFF switch that is used to disconnect the telephone audio from your recorder when you do not want your conversation recorded. The TSA-SLM has a 25' output cable that can be extended with the T25-EXT. TSA-SLM Telephone line switch box. Connects in series with the phone cable feeding your recorder. With its ON/OFF switch in the OFF position, the output RJ-11 jack is disconnected from the input RJ-11 jack. Includes a six foot phone cable. OVER TSB-6 Digital Recorder Accessories (continued) Digital Recorders from Omnicron come with cables and accessories suitable for most installations. The items on this page are for unusual applications that require different adapters or cables. Converts modular phone cable to mini-plug. The MOD-SC is used when you have a cable with a standard RJ-11 single-line telephone type plug that you need to connect to equipment with a 3.5mm miniplug jack. It has an RJ-11 jack on one end and a 3.5mm mini-plug on the other end. The MOD-SC is typically used to connect cables provided with digital recorders such as our Total Recall and TeleCorder, to the audio output of a radio receiver. MOD-SC Telephone handset adapter with DTMF encoder. Similar to other logger patches that connect in series with the handset or headset cord of a digital phone, the TC-100P provides audio output for recording. It also provides a touch tone keypad to send DTMF digits to your recorder, along with the conversations, and an amplifier to boost weak audio. Most digital phones do not produce DTMF tones. With the TC-100P connected to your digital phone, the recorder will detect any numbers you enter on its keypad during a recording and display them just as if you were using an analog phone. Includes two memory keys for pre-stored numbers, AC power adapter (15vDC) and a cable to connect it to the handset of the phone. Weight: 15 oz.; Size: 3" W x 4.9" D x 1.4" H. TC-100P Converts 2-line RJ-14 jacks into two separate RJ-11 single line phone jacks. This adapter/cable-assembly splits a 2-line RJ-14 circuit/jack into two RJ-11 jacks (Line-1 and Line-2). Typically used with the RJ-14 input jacks on some Total Recall and TeleCorder recorders from Omnicron. MTJ-S2 Line level audio mixer, two inputs -- one output. Used in applications where audio from two isolated line level sources, such as remote controlled 2-way radio circuits, must be combined into a single audio output. The mixed audio can be fed to the input of a voice logging recorder so that both audio sources will be recorded on a single channel. It provides balanced line-input, transformer isolation, capacitive coupling, and RF bypass. High impedance input circuits permit connection to balanced and unbalanced audio sources with minimal loading. Each channel has an independent audio level adjustment. Includes AC power adapter. RSA-2A1 TSA-MRS Telephone handset supervisory adapter -- with proximity switch audio muting. The TSA-MRS has a small proximity sensing magnetic reed switch that is used to mute handset audio when a small magnet (mounts on the handset of your phone) is within 1/2" of the sensing switch that mounts on your phone. Used in rare cases where handset audio is not muted when your phone is hung-up and the standard TSA-3LM cannot be used satisfactorily. Contact your Omnicron representative for assistance in selecting the proper cables or adapters for your application. Voice Loggers have been our specialty since 1975. 0402102005 OMNICRON ELECTRONICS www.omnicronelectronics.com 581 Liberty Highway P.O. Box 623 Putnam, CT 06260-0623 (860) 928-0377 FAX (860) 928-6477 Additional information is also available at : ...