ONE FOR ALL 4 URC-7541/44 702246 Digita l Universal Remote USER GUIDE & CODE BOOK URC-7544 ZAPPER ONE FOR ALL URC-7541 Retain For Future Reference Table of Contents QUICK SET-UP QUICK SEARCH INSTALLING THE BATTERIES THE KEYPAD INSTALLATION Setting up your Digital Satellite System Setting up your other devices The Search Method SET-UP CODES Quick Code Reference Televisions Video Recorders Satellite Receivers Cable Converters DVD Players ADVANCED FEATURES Scan Volume Punch Through Menu Colour and Brightness Sleeptimer Using the AUX Key Changing the mode of a Device Key TROUBLE-SHOOTING Helpful Hints (Problem and Solution) Customer Service 2 3 4 4 7 8 9 11 11 17 20 23 23 24 24 25 25 26 28 29 30 31 About Your ONE FOR ALL 4 Digital Your ONE FOR ALL 4 Digital Package contains: Your ONE FOR ALL 4 Digital Remote Your ONE FOR ALL 4 Digital Manual Your manual is divided into two parts: set-up instructions and device codes. You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL 4 Digital needs 2 new "AA/LR6" alkaline batteries. Your ONE FOR ALL 4 Digital can operate any combination of the following 4 devices: a Television, a Video Recorder or DVD Player and a Satellite Receiver or Cable Converter. The ONE FOR ALL 4 Digital is specially designed to provide full functionality of your Digital Satellite System (BskyB, ONdigital, Foxtel, Multichoice etc.). Of course the ONE FOR ALL 4 Digital can operate the basic functions of any satellite and cable converter as well. To find out how to install the ONE FOR ALL 4 Digital for your devices please refer to the pages within. Menu Magic Device Keys Power Number Keys Menu Up Channel(+) OK Exit Menu Left Channel(-) Menu Down Rewind/Text On Play/Text Off SP/LP/Red Stop/Green Custom Satellite Keys Fast Forward/ Expand Pause/Hold Auto/Blue Record/Yellow Volume Up Menu Right Mute Volume Down URC-7541/44 WWW.ONEFORALL.COM 1 Quick Set-Up The instructions below and on the next page can be used to quickly install your new ONE FOR ALL. You can use the Quick Set-Up below with the codes listed on pages 11-23. If this doesn't work, try the Quick Search on the next page. The Quick Search can also be used even if your brand is not listed at all. Make sure you install the batteries in your ONE FOR ALL before following the instructions below. Make sure your device is switched on (not in standby). 1. Press device key: or or until 2. Press and hold twice (thethe device key blinks device key will blink once and then twice). Then release. 3. Enter ____ (4-digit code). See pages 1123. The device key will blink twice. 4. Aim remote at your device and press (or PLAY). NOTES: - To set up your Digital Satellite System please enter the four-digit code found at the bottom of the adhesive overlay next to the brand name. - The instructions above are a "Quick" set-up guide. For further explanation, please refer to the pages within. - Make sure you write your Set-Up codes in the boxes provided on page 11 and inside the battery compartment for easy future reference. 2 Quick Search Make sure your device is switched on (not in standby). Make sure you aim your ONE FOR ALL at your device during "Quick Search". 1. Aim your ONE FOR ALL at your device and press device key: or or and hold 2. Pressthe device key until blinks twice (the light will blink once then twice). 3. Press 4. device key ( Slowly alternate between the ie: ) and until your device turns off. turns off, 5. When your .devicedevice key will press The blink twice. Your device is Set Up. NOTES: - During step 4, you may have to press these keys many times, so please be patient. - If your Video's original remote control does not have a power key, press PLAY instead of POWER during step 4. Make sure a cassette is inserted. 3 Installing the Batteries Your ONE FOR ALL 4 Digital needs 2 new "AA/LR6" alkaline batteries. 1 Remove the battery cover from the back of your ONE FOR ALL 4 Digital by pressing down on the tab. 2 Match the batteries to the + and - marks inside the battery case, then insert the batteries. 3 Press the battery cover back into place. Important notes: - On the inside of the battery compartment door you will find a label on which to write your Set-Up codes after your ONE FOR ALL 4 Digital is set up for your device. Please write down your codes for easy, future reference. - Do not use rechargeable batteries. - In order to avoid having to reprogram your ONE FOR ALL 4 Digital after you remove the batteries, you will need to insert new batteries within 5 minutes. The Keypad Function MAGIC Key The MAGIC key is used to set up your ONE FOR ALL 4 Digital and to access special functions. Menu Key The MENU key controls the same function as it did on your original remote. Power Key The POWER key controls the same function as it did on your original remote. 4 WWW.ONEFORALL.COM The Keypad Function Device Keys The TV, VCR, SAT and AUX keys select the home entertainment device to be controlled. For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Recorder or DVD Player and the SAT key operates your Satellite Receiver or Cable Converter. The AUX key only operates a second Television, Video Recorder or DVD Player, Satellite Receiver or Cable Converter. During operation of the ONE FOR ALL the device key will light up to indicate the mode you are using. ch vol + EXIT MUTE Channel, Volume Keys The CHANNEL and VOLUME keys control the two most frequently used functions of your device. They operate just as those on your original remote. MUTE Mute Key The MUTE key operates the same function as it did on your orginal remote control. It is also used to activate the SCAN feature (see page 24). OK Directional Keys These keys will allow you to navigate through the MENU of your device. EXIT Exit The EXIT key will exit the MENU. OK OK The OK key will confirm your choice in MENU operation. -/-- 20 Number Keys The Number keys (0-9, 10, AV(20)) provide direct access functions just like your original remote, such as channel selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. If your original remote has a 20 key, this function can also be found under the AV key. Video Recorder Keys After pressing the VCR key, the Video Recorder keys operate the functions of your Video Recorder. To prevent accidental recording, the RECORD key must be pressed twice to start recording. The SP/LP key controls the tape speed function, the AUTO key controls the auto tracking function just like on your original remote. SP/LP AUTO WWW.ONEFORALL.COM 5 The Keypad Function Teletext Keys After pressing the TV key, the top row of the VCR keys are used to operate the main teletext functions. The symbols below the keys are for teletext. The text keys are used to access the teletext functions of your Television. Of course, your Television must have teletext capability. TEXT ON Puts the Television in the teletext mode. TEXT ON/OFF Switches the Television back to regular viewing mode. On some Televisions, this may be done by pressing the TEXT key several times. HOLD/STOP EXPAND Stops changing pages. Shows the top half of the teletext page in larger letters. By pressing again, you can see the bottom half of the teletext page enlarged. To return to regular teletext viewing, press the EXPAND key again, or press the TEXT key, depending on your television. After pressing the TV key, the bottom row of the Video Recorder keys marked red, green, yellow and blue, allow you to access the fastext functions of your television. (green) Again, your television must have fastext capability to operate these functions. If on your original remote control these keys are used for MENU functions, the ONE (yellow) FOR All Fastext keys may operate the same. (red) (blue) Important note: For a more detailed explanation of teletext and fastext, please refer to the manual of your Television. Remember, different Televisions control teletext and fastext features in different ways. Not all of the teletext functions may be available for your particular model. Custom Satellite Keys: These special keys are designed to be used with your Digital Satellite System. Inside your manual you will find a package containing several adhesive overlays which will customize these keys. Open the package and locate the correct overlay referring to your brand. Set up your Digital Satellite System following the instructions on page 7. In addition, when in TV mode, the top row of keys will provide you with the following functions (if available on the original remote); from left to right: White, Purple, Mix and 16:9. 6 WWW.ONEFORALL.COM Installation Setting up your Digital Satellite System To set up the ONE FOR ALL 4 Digital for your Digital Satellite System, follow the instructions below. 1 2 3 4 5 tv guide box office services interactive backup SKY i i help BskyB S0847 Example Inside this manual you will find a package containing several adhesive overlays. Open the package and locate the correct overlay referring to your brand. Make sure your Digital Satellite System is switched on. Press and release the SAT key. Press and hold down the MAGIC key until the device key blinks twice (the device key will blink once, then twice). ____ Enter the four-digit SAT code which you will find on the overlay corresponding to your brand. The device key will blink twice. Now aim your ONE FOR ALL 4 Digital at your Digital Satellite System and press POWER. If your device switches off, your ONE FOR ALL 4 Digital should be ready to run your Digital Satellite System. 6 7 8 Turn your device back on and try all the remote's functions. Write your code in the four boxes provided in the battery compartment and on page 11 for easy future reference. The ONE FOR ALL 4 Digital should now operate your Digital Satellite System. - Remove the temporary paper overlay over the eight keys at the bottom of the remote. - Take the adhesive overlay corresponding to your brand. - Peel off the transparent protective cover from the front. - Peel off the backing sheet. - Stick the overlay in its place over the eight keys at the bottom of the remote. WWW.ONEFORALL.COM 7 Installation Setting Up Your Other Devices To set up the ONE FOR ALL 4 Digital for your Television, Video Recorder or DVD Player, Satellite Receiver or Cable Converter, follow the instructions below. Example: to set up the ONE FOR ALL for your TV: 1 Acura al Admir n Adyso Agazi AGB Agef Aiko ALL FOR ONE 3, 041 0009 0093, 036 0087, 0216 0217, 0264 0516 7, 0 0087 0009, 003 0216, 0274 1, 0037, 0208, 037 0361, Find your Television code in the Set-Up Code section (starting on page 11). Codes are listed by brand name. The most popular code is listed first. Make sure your Television is switched on (not in standby). Press and release your ONE FOR ALL 4 Digital's TV key. Press and hold down the MAGIC key until the device key blinks twice (the device key will blink once, then twice). 2 3 4 5 6 ____ Enter your four-digit TV code using the number keys. The device key will blink twice. Now, aim the ONE FOR ALL 4 Digital at your Television and press POWER. If your Television switches off, your ONE FOR ALL 4 Digital should be ready to run your Television. If your device (television) does not respond to the code entered, follow steps 1-5 with each code listed for your brand. If none of the codes listed for your brand operate your device (television), or if your brand is not listed at all, try the search method described on page 9. Write your code in the four boxes provided in the battery compartment and on page 11 for easy future reference. 7 Important notes: - Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. - For VCR setup: If your VCR's original remote control does not have a POWER key, press PLAY instead of POWER during step 5. - Remember to press the correct device mode key before operating your device. Only one device can be assigned to each device mode key. If your original remote control operates more than one device, you need to set up each device separately. Devices can be found under the following keys: Television Video Recorder/DVD (*) Television / (*) Video Recorder / (*) Satellite Receiver/ Cable Converter Satellite Receiver / Cable Converter To set up for a second TV, VCR/DVD or SAT/CBL (See Changing the Mode of a Device Key, Page 29). (*) To use the AUX key (see page 28). 8 WWW.ONEFORALL.COM Installation The Search Method If your Television, Video Recorder or DVD Player, Satellite or Cable Converter does not respond to the ONE FOR ALL 4 Digital after you have tried all the codes listed for your brand, try searching for your code. T ...