User manual ONKYO HT-S3100

Contents Introduction ..................................... 2 5.1ch Home Theater System HT-S3100 HT-S3105 AV Receiver (HT-R340) Speaker Package HTP-360 (North American and Asian models) HTP-318 (European models) Connection .................................... 20 Turning On & First Time Setup..... 37 Basic Operation Playing your AV components ....... 39 Using the Tuner............................ 41 Instruction Manual Enjoying the Listening Modes ..... 49 Thank you for purchasing an Onkyo 5.1ch Home Theater System. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new 5.1ch Home Theater System. Please retain this manual for future reference. Advanced Operation ..................... 51 Troubleshooting ............................ 58 Specifications................................ 62 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. S3125A Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power-supply cord or plug is damaged, B. If liquid has been spilled, or objects have fallen into the apparatus, C. If the apparatus has been exposed to rain or water, D. If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation, E. If the apparatus has been dropped or damaged in any way, and F. When the apparatus exhibits a distinct change in performance this indicates a need for service. 16. Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. Don't put candles or other burning objects on top of this unit. 17. Batteries Always consider the environmental issues and follow local regulations when disposing of batteries. 18. If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation. Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape. 9. 10. 11. 12. 13. 14. 2 Precautions 1. Recording Copyright--Unless it's for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse--The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care--Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don't use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering. 4. Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit's rear panel (e.g., AC 230­240 V, 50 Hz or AC 120 V, 60 Hz). The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times. Some models have a voltage selector switch for compatibility with power systems around the world. Before you plug in such a model, make sure that the voltage selector is set to the correct voltage for your area. Pressing the [STANDBY/ON] button to select Standby mode does not fully shutdown the unit. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet. 5. Never Touch this Unit with Wet Hands--Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. 6. Handling Notes · If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it. · Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case. · This unit's top and rear panels may get warm after prolonged use. This is normal. · If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally. For U.S. models FCC Information for User CAUTION: The user changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Modèle pour les Canadien REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA. Sur les modèles dont la fiche est polarisée: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. 3 Precautions--Continued For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. Speaker Precautions Placement · The subwoofer cabinet is made out of wood and is therefore sensitive to extreme temperatures and humidity, do not put it in locations subject to direct sunlight or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen. · Do not put water or other liquids close to the speakers. If liquid is spilled over the speakers, the drive units may be damaged. · Speakers should only be placed on sturdy, flat surfaces that are free from vibration. Putting them on uneven or unstable surfaces, where they may fall and cause damage, will affect the sound quality. · Subwoofer is designed to be used in the upright vertical position only. Do not use it in the horizontal or tilted position. · If the unit is used near a turntable, CD player or DVD player, howling or slipping of sound may occur. To prevent this, move the unit away from the turntable, CD player or DVD player, otherwise lower the unit's output level. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. IMPORTANT The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cord's plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug. Using Close to a TV or Computer TVs and computer monitors are magnetically sensitive devices and as such are likely to suffer discoloration or picture distortion when conventional speakers are placed nearby. To prevent this, the SKF-360F/SKF318F and SKC-360C/SKC-318C feature internal magnetic shielding. In some situations, however, discoloration may still be an issue, in which case you should turn off your TV or monitor, wait 15 to 30 minutes, and then turn it back on again. This normally activates the degaussing function, which neutralizes the magnetic field, thereby removing any discoloration effects. If discoloration problems persist, try moving the speakers away from your TV or monitor. Note that discoloration can also be caused by a magnet or demagnetizing tool that's too close to your TV or monitor. Do not place SKM-360S/SKM-318S close to TV or a computer monitor because they have no magnetic shield. For European Models Declaration of Conformity We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY K. MIYAGI Input Signal Warning The speakers can handle the specified input power when used for normal music reproduction. If any of the following signals are fed to them, even if the input power is within the specified rating, excessive current may flow in the speaker coils, causing burning or wire breakage: 1. Interstation noise from an untuned FM radio. 2. Sound from fast-forwarding a cassette tape. 3. High-pitched sounds generated by an oscillator, electronic musical instrument, and so on. 4. Amplifier oscillation. 5. Special test tones from audio test CDs and so on. 6. Thumps and clicks caused by connecting or disconnecting audio cables (Always turn off your amplifier before connecting or disconnecting cables.) 7. Microphone feedback. ONKYO EUROPE ELECTRONICS GmbH Memory Backup The AV receiver uses a battery-less memory backup system in order to retain radio presets and other settings when it's unplugged or in the case of a power failure. Although no batteries are required, the AV receiver must be plugged into an AC outlet in order to charge the backup system. Once it has been charged, the AV receiver will retain the settings for several weeks, although this depends on the environment and will be shorter in humid climates. 4 Features HT-R340 AV Receiver · · · · · · · · · · · · · · · · · · · · · 100 W/channel into 6 ohms (FTC) 100 W/channel into 6 ohms (DIN) 120 W/channel into 6 ohms (JEITA) Dolby*1 Digital and Dolby Pro Logic II DTS and DTS Neo:6*2 5.1 Optimum Gain Volume Circuitry Massive High Current Power Supply (H.C.P.S.) transformer CinemaFILTER Non-Scaling Configuration A-Form -- Auto Format Sensing OR-EQ (OptiResponse Equalizer)*3 function 192 kHz/24-bit D/A converters Powerful and highly accurate Analog Devices 32-bit DSP processing 3 digital inputs (2 optical, 1 coaxial) HDTV-ready component video switching (3 inputs, 1 output) Adjustable crossover (40/50/60/80/100/120/150/ 200 Hz) Speaker A/B terminal Color-coded speaker terminal posts system control Compatible with RI Dock for iPod*4 A/V Sync control function HTP-360 Speaker Package (North American and Asian model) SKF-360F L/R 2-Way Front Speakers SKC-360C 2-Way Center Speaker (North American model) · 3-1/4" (8 cm) cone woofer · 3/4" (2 cm) ceramic tweeter · Max. input power:120 W · Magnetically shielded · Color-coded speaker terminals and speaker cable · 6-ohm impedance SKC-360C 2-Way Center Speaker (Asian model) · 3-1/4" (8 cm) cone woofer × 2 · 3/4" (2 cm) ceramic tweeter · Max. input power:120 W · Magnetically shielded · Color-coded speaker terminals and speaker cable · 6-ohm impedance SKM-360S L/R Full-Range Surround Speakers · 3-1/4" (8 cm) full-range speaker · Max. input power:120 W · 6-ohm impedance · Color-coded speaker terminals and speaker cable SKW-360 Bass Reflex Subwoofer · 8" (20 cm) cone woofer · Max. input power:130 W · Color-coded speaker terminals and speaker cable HTP-318 Speaker Package (European model) SKF-318F L/R 2-Way Front Speakers SKC-318C 2-Way Center Speaker · 3-1/4" (8 cm) cone woofer · 3/4" (2 cm) ceramic tweeter · Max. input power:120 W · Magnetically shielded · Color-coded speaker terminals and speaker cable · 6-ohm impedance SKM-318S L/R Full-Range Surround Speakers · 3-1/4" (8 cm) full-range speaker · Max. input power:120 W · 6-ohm impedance · Color-coded speaker terminals and speaker cable *1. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are registered trademarks of Dolby Laboratories. *2. "DTS" and "Neo:6" are trademarks of Digital Theater Systems, Inc. *3. OptiResponse, and OR-EQ are trademarks of Onkyo Corporation. *4. Apple and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. SKW-318 Bass Reflex Subwoofer · 8" (20 cm) cone woofer · Max. input power:130 W · Color-coded speaker terminals and speaker cable 5 Contents Introduction Important Safety Instructions ................ 2 Precautions ............................................. 3 Speaker Precautions .............................. 4 Features ................................................... 5 Package Contents ................................... 6 Front & Rear Panels................................ 8 Speaker Package .................................. 11 Remote Controller................................. 12 Before Using the AV receiver................. 19 Connection Enjoying Home Theater ........................ 20 Connecting Your Speakers .................. 21 Connecting Antenna ............................. 24 Connecting Your Components .............. 26 Turning On & First Time Setup Turning On............................................. 37 First Time Setup .................................... 38 Basic Operation Playing Your AV Components ............. 39 Using the Tuner..................................... 41 Common Functions .............................. 45 Recording .............................................. 48 Enjoying the Listening Modes Using the Listening Modes .................. 49 Advanced Operation Adjusting the Listening Modes............ 51 Advanced Setup .................................... 53 Troubleshooting.....................................58 If you can't resolve an issue, try resetting the AV receiver by holding down the [VIDEO 1] button and pressing the [STANDBY/ON] button. Package Contents Make sure you have the following items: AV Receiver HT-R340 HT-R340 Remote controller & two batteries (AA/R6) (American type shown) Indoor FM antenna (Connector type varies from country to country.) AM loop antenna Power-plug adapter Only supplied in certain countries. Use this adapter if your AC outlet does not match with the plug on the AV receiver's power cord. (Adapter varies from country to country.) * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operation are the same regardless of color. Specifications ........................................62 6 Package Contents--Continued Speaker Package HTP-360 (North American and Asian models) Speaker Package Accessories Front speakers (SKF-360F L/R) (Red) (White) (Green) Speaker cable for front speakers and center speaker 11 ft. (3.5 m) Center speaker (SKC-360C) (Blue) (Gray) Speaker cables for surround speakers 30 ft. (9 m) Surround speakers (SKM-360S L/R) (Purple) Speaker cables for subwoofer 15 ft. (4.5 m) Subwoofer (SKW-360) 16 thin rubber stoppers, 12 thick rubber stoppers Speaker Package HTP-318 (European models) 4 floor pads for the subwoofer Front speakers (SKF-318F L/R) Center speaker (SKC-318C) Surround speakers (SKM-318S L/R) Subwoofer (SKW-318) 7 Front & Rear Panels Front Panel North American and Asian Models 1 2 3 4 5 6 78 9J K L TUNING / PRESET M MASTER VOLUME STANDBY/ON ENTER STANDBY A SPEAKERS B TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE RETURN SETUP CLEAR PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD NO European Models P Q R S 9 TUNING / PRESET MASTER VOLUME STANDBY/ON ENTER STANDBY A SPEAKERS B TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE RETURN SETUP CLEAR PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD For detailed information, see the pages in parentheses. F Display See "Display" on page 9. A STANDBY/ON button (37) This button is used to set the AV receiver to On or Standby. G DISPLAY button (40) This button is used to display various information about the currently selected input source. B STANDBY indicator (37) This indicator lights up when the AV receiver is in Standby mode, and it flashes while a signal is being received from the remote controller. H DIGITAL INPUT button (38, 57) This button is used to assign the digital inputs and to specify the format of digital input signals. C Remote-control sensor (19) This sensor receives control signals from the remote controller. I DIMMER or RT/PTY/TP button (44, 45) This button is used to adjust the display brightness. On the European model, this is the RT/PTY/TP button, and it's used with RDS (Radio Data System). See "Using RDS (European models only)" on page 43. D STEREO button (49) This button is used to select the Stereo listening mode. E LISTENING MODE [ ]/[ ] buttons (49) These buttons are used to select the listening modes. 8 Front & Rear Panels--Continued J MEMORY button (42) This button is used when storing or deleting radio presets. N PHONES jack (45) This 1/4-inch phone jack is for connecting a standard pair of stereo headphones for private listening. K TUNING MODE button (41) This button is used to select the Auto or Manual tuning mode. O SPEAKERS A & B buttons (39) These buttons are used to turn speaker sets A and B on or off. L Arrow/TUNING/PRESET & ENTER buttons (51, 53­56) When the AM or FM input source is selected, the TUNING [ ] [ ] buttons are used to tune the tuner, and the PRESET [ ] [ ] buttons are used to select radio presets (see pages 41, 42). When the setup menus are used, they work as arrow buttons and are used to select and set items. The ENTER button is also used with the setup menus. P TONE, [­] & [+] buttons (45) These buttons are used to adjust the bass and treble. Q Input selector buttons (38­40) These buttons are used to select from the following input sources: MULTI CH, DVD, VIDEO 1/VCR, VIDEO 2, VIDEO 3, TAPE, TUNER, or CD. The [MULTI CH] button selects the DVD analog multichannel input. M MASTER VOLUME control (39) This control is used to adjust the volume of the AV receiver. R RETURN button (51, 53, 54, 56) This button is used to return to the previously displayed setup menu. S SETUP button (51, 53­56) This button is used to access various settings. Display 1 2 3 4 5 For detailed information, see the pages in parentheses. 6 RDS (European model only) (43): This indicator lights up when the AV Receiver is tuned to a radio station that supports RDS (Radio Data System). MEMORY (42): This indicator lights up when presetting radio stations. FM STEREO (41): This indicator lights up when the AV receiver is tuned to a stereo FM station. 1 A & B speaker indicators (20, 39) Indicator A lights up when speaker set A is on. Indicator B lights up when speaker set B is on. 2 MUTING indicator (46) This indicator flashes when the AV receiver is muted. 3 Source/listening mode indicators (50, 57) These indicators show the currently selected listening mode and digital audio format. 5 SLEEP indicator (46) This indicator lights up when the Sleep function has been set. 4 Tuning indicators TUNED (41): This indicator lights up when the AV receiver is tuned to a radio station. AUTO (41): This indicator lights up when Auto Tuning is selected and disappears when Manual Tuning is selected. 6 Message area This area of the display shows various information about the currently selected source. 9 Front & Rear Panels--Continued Rear Panel 1 B 3 45 6 7 8 9 JK L M A DIGITAL IN OPTICAL 1, 2 & COAXIAL These optical and coaxial jacks can be used to connect a CD or DVD player and other components with digital audio outputs. To use , you must make an analog audio connection (RCA) between the AV receiver and the other component, even if they are connected digitally. Note: can only be used with Onkyo components. B COMPONENT VIDEO A DVD player, TV, or other component that supports component video can be connected here. J CD IN These analog inputs can be used to connect a CD player with analog outputs. C AM ANTENNA These push terminals are for connecting an AM antenna. K TAPE IN/OUT These analog inputs and outputs can be used to connect a cassette recorder, MiniDisc recorder, or other recorder with analog inputs and outputs. D FM ANTENNA This jack is for connecting an FM antenna. E MONITOR OUT The composite video output should be connected to a video input on your TV or projector. L VIDEO 1 IN/OUT, VIDEO 2 IN & VIDEO 3 IN The VIDEO 1, composite video, and audio inputs and outputs can be used to connect a VCR. The VIDEO 2, VIDEO 3, composite video, and audio inputs can be used to connect another video source (e.g., cable TV, satellite TV, or a set-top box). F FRONT SPEAKERS B These push terminals are for connecting speaker set B. G FRONT SPEAKERS A, SURROUND SPEAKERS, CENTER SPEAKER & SUBWOOFER SPEAKER These push terminals are for connecting speaker set A. M DVD IN The FRONT, SURROUND, CENTER, and SUBWOOFER jacks can be used to connect a component with an analog multichannel audio output, such as a DVD player with a 5.1-channel analog output. The composite video input should be connected to a video output on the DVD player. H VOLTAGE SELECTOR (only some models) This voltage selector provides compatibility with power systems around the world. I This (Remote Interactive) jack can be connected to the jack on another Onkyo component. The AV receiver's remote controller can then be used to control that component. See pages 20­36 for connection information. 10 Speaker Package Front, Center, Surround, & Subwoofer speakers (SKF-360F/SKF-318F, SKC-360C/SKC-318C, SKM-360S/SKM-318S, SKW-360/SKW-318) Rear SKF-360F/SKM-360S SKF-318F/SKM-318S 2 2 1 3 3 1 2 SKW-360/SKW-318 2 SKC-360C/SKC-318C 2 3 A Speaker terminals 1 1 C Speaker mount/bracket inserts These threaded inserts can be used to attach the speaker to a speaker mount or bracket. See page 22 for mounting instructions. Note: Use commercially available machine screws to attach the speaker to a speaker mount or bracket. North American models require 1/4-inch screws. Other models require M5 (5 mm) screws. Caution: The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will damage them. These push terminals are for connecting the speaker to the HT-R340 with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. Simply connect each cable to the same-colored positive speaker terminal. B Keyhole slots These keyhole slots can be used to wall-mount the speaker. See page 22 for mounting instructions. 11 Remote Controller How to Use the Remote Controller Including the AV receiver, the remote controller can be used to control up to six different components. The remote controller has a specific operating mode for use with each type of component. Modes are selected by using the five REMOTE MODE buttons. RECEIVER/TAPE Mode In RECEIVER/TAPE mode, you can control the AV receiver and an Onkyo cassette recorder connected via . DVD, CD, MD, CDR & HDD Modes With these modes, you can control an Onkyo DVD player and CD/MD/CDR/HDD player/recorder. RECEIVER Mode RECEIVER mode is used to control the AV receiver. To set the remote controller to RECEIVER mode, press the [RECEIVER] REMOTE MODE button. ON/STANDBY RECEIVER REMOTE MODE RECEIVER TAPE A 2 1 V1 RECEIVER TAPE DVD TAPE INPUT SELECTOR 2 V2 3 V3 CD DVD CD MD 3 4 7 TAPE 5 MULTI CH 6 DVD MD L 8 TUNER 9 CD CDR +10 0 DIMMER CLR SLEEP HDD 4 CDR HDD --/--- M VOL 5 TOP MENU DISC ALBUM CH N O MENU 1 2 Use the REMOTE MODE buttons to select a mode. Use the buttons supported by that mode to control the component. RECEIVER mode: see right column DVD mode: see page 14 CD mode: see page 15 MD/CDR mode: see page 16 HDD mode: see page 17 TAPE mode: see page 18 6 SP A / B MUTING 7 PLAYLIST ENTER PLAYLIST 8 RETURN SETUP P 9 J K LISTENING MODE STEREO SURROUND AUDIO SUBTITLE RANDOM REPEAT TEST TONE CH SEL PLAY MODE DISPLAY OR-EQ L NIGHT CINE FLTR LEVELLEVEL+ Note: Some of the remote controller operations described in this manual may not work as expected with other components. Q R S RC-646S 12 Remote Controller--Continued For detailed information, see the pages in parentheses. O MUTING button (46) This button is used to mute the AV receiver. A ON/STANDBY button (37) This button is used to set the AV receiver to On or Standby. B INPUT SELECTOR buttons (39) These buttons are used to select the input sources. P SETUP button (51, 53­56) This button is used to access various settings. Q CINE FLTR button (52) This button is used to set the CinemaFILTER function. C MULTI CH button (40) This button is used to select the multichannel DVD input. R L NIGHT button (52) This button is used to set the Late Night function. D DIMMER button (45) This button is used to adjust the display brightness. E CH +/­ button (42) This button is used to select radio presets. F SP A/B button (39) This button is used to turn speaker sets A and B on or off. S OR-EQ button (46) This button is used to turn on the OptiResponse Equalizer, which optimizes performance when the HT-R340 is used with the speakers included in the HTP-360/HTP-318 Home Theater Speaker Package. When the OptiResponse Equalizer is on, you can enjoy a powerful sound with movies or music even at low volume levels. G Arrow [ ]/[ ]/[ ]/[ ] & ENTER buttons (51, 53­56) These buttons are used to select and adjust settings. H RETURN button (51, 53, 54, 56) This button is used to return to the previous display when changing settings. I LISTENING MODE buttons (49) These buttons can be used to select listening modes regardless of the currently selected remote controller mode. STEREO button This button selects the Stereo listening mode. SURROUND button This button selects the Dolby and DTS listening modes. [ ]/[ ] buttons These buttons can be used to select any of the available listening modes. J TEST TONE, CH SEL, LEVEL- & LEVEL+ buttons (37, 47, 54) These buttons are used to adjust the level of each speaker. K DISPLAY button (40) This button is used to display various information about the currently selected input source. L REMOTE MODE buttons (12) These buttons are used to select the remote controller modes. When you press a button on the remote controller, the REMOTE MODE button for the currently selected mode lights up. M SLEEP button (46) This button is used to set the Sleep function. N VOL [ ]/[ ] button (39) This button can be used to adjust the volume of the AV receiver regardless of the currently selected remote controller mode. 13 Remote Controller--Continued DVD Mode To select your DVD player as the input source, press: RECEIVER A ON/STANDBY button This button sets the DVD player to On or Standby. B Number buttons These buttons are used to enter title, chapter, and track numbers and to enter times for locating specific points in time. 6 DVD C DISC +/­ button This button selects discs on a DVD changer. D TOP MENU button To set the remote controller to DVD mode, press the [DVD] REMOTE MODE button. This button is used to select a DVD's top menu. E Arrow [ ]/[ ]/[ ]/[ ] & ENTER buttons These buttons are used to navigate DVD menus and the DVD player's onscreen setup menus. F RETURN button ON/STANDBY REMOTE MODE 1 2 1 V1 RECEIVER TAPE DVD DVD This button is used to exit the DVD player's onscreen setup menu and to restart menu playback. INPUT SELECTOR G Playback buttons From left to right: Pause, Play, Stop, Fast Reverse, Fast Forward, Previous, and Next. 2 V2 3 V3 CD 4 7 TAPE 5 MULTI CH 6 DVD MD H SUBTITLE button This button is used to select subtitles. 8 TUNER 9 CD CDR I AUDIO button HDD +10 --/--- 0 DIMMER CLR SLEEP K This button selects foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS). 3 TOP MENU DISC ALBUM CH VOL J DISPLAY button This button is used to display information about the current disc, title, chapter, or track on the DVD player's display, including the elapsed time, remaining time, total time, and so on. MENU 4 SP A / B MUTING L ENTER PLAYLIST PLAYLIST 5 6 RETURN K CLR button M SETUP This button is used to cancel functions and to clear entered numbers. L MENU button This button is used to display a DVD's menu. 7 LISTENING MODE M SETUP button This button is used to access the DVD player's onscreen setup menus. STEREO SURROUND 8 9 J AUDIO SUBTITLE RANDOM REPEAT TEST TONE CH SEL PLAY MODE DISPLAY OR-EQ L NIGHT CINE FLTR LEVELLEVEL+ N O P N RANDOM button This button is used with the random playback function.