OWNER'S MANUAL 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6865PFST Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Contents Congratulations on your purchase of this Palsonic colour television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Main Features ............................................................................................ Safety precautions ..................................................................................... Identification of Controls ............................................................................ Antenna Connection .................................................................................. Preparing the remote control ..................................................................... External equipment connections ............................................................... Power On/Off ............................................................................................. Selecting Input Signal ................................................................................ Tuning in .................................................................................................... Channel Selection ..................................................................................... Channel Edit .............................................................................................. Picture adjustments ................................................................................... Sound controls ........................................................................................... Timer setting .............................................................................................. System setup ............................................................................................. Lock setting ............................................................................................... Other functions .......................................................................................... Troubleshooting Guide .............................................................................. Specifications ............................................................................................ 1 2 4 6 7 8 10 11 12 15 16 17 18 19 21 22 24 25 27 Main features . Hyperband . Automatic channel preset . Full function remote control . 200 preset channels . Intellectualized I C-bus control . AV input/output (RCA) jacks . DVD input jacks . Selectable picture . ON timer/OFF timer/Sleep timer . Channel scan . Channel edit . Child lock . Hotel lock . Game . Calendar 2 1 Safety precautions Note: This TV set can operate on an AC power of 240V, 50Hz. You must not use a power supply of any other type. When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth. Avoid exposing the set to direct sunlight and other sources of heat to prevent damage to the cabinet and components. High voltage exists in this TV set. Do not remove the cover. 2 Safety precautions Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the TV set to ensure adequate ventilation. If the power cord or the plug is damaged contact a qualified service department for service. When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet. Don't try to push anything into the cabinet or place any vessel with water on the TV set. Don't overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 3 Identification of Controls Front Power Switch Indicator Remote Sensor MENU TV/AV CH- CH+ VOL- VOL+ MENU Channel down Volume down Volume up TV/AV Channel up Back DVD input (VIDEO: Y,CB,CR, AUDIO: L/MONO, R) AV1 input (VIDEO, AUDIO: L/MONO, R) AV2 input (VIDEO, AUDIO: L/MONO, R) AV output (VIDEO, AUDIO: L, R) Antenna input S-VIDEO input 4 Identification of Controls Remote control TV/AV Power on/standby GAME TV/VIDEO input select 1 4 2 5 8 3 ZOOM Game playing Picture zoom CALL 6 9 MUTE Direct channel select 7 Digit select 0 Sleep timer SCAN Recall on-screen display Sound mute Return to previous channel Picture mode select Program scan MUSIC Enter into music mode NICAM Lock setting Access picture menu Select higher program Volume down Volume up Open the menu Select lower program 5 Antenna connection Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. TV REAR Notes: It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions. The aerial cable should not be bundled with the power cord and the like. INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 6 Preparing the remote control Installing batteries Effective range of the Remote Open the battery cover. Install two "AA" batteries matching the +/- polarities of the battery to the +/marks inside the battery compartment. TV/AV GAME 1 4 7 0 2 5 8 3 ZOOM 6 CALL 9 MUTE SCAN MUSIC Replace the battery cover. Notes: When there is an obstacle between the TV and the transmitter, the transmitter may not operate. When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the TV the remote operation may be unstable. Notes: Do not try to recharge batteries that are not intended to be recharged. Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. Do not throw the batteries into a fire. Dispose of used batteries in the specified manner. Do not drop, dampen or disassemble the remote control. 7 External equipment connections The following describes how to use and connect the TV with other AV equipment (for example, VTR, Video Camera, DVD, Video game, etc.) Please refer to the owner's manual of the equipment to be connected as well. To connect AV input terminals Connect side AV inputs TV SET SIDE To access the unit connected to these jacks, press TV/AV button until AV2 appears on the screen. Y Y Yellow (video) W White (audio L/MONO) R Red (audio R) W Video game Y W R R Signal To video outputs To audio outputs Connect rear AV inputs If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal on the unit. If not, connect it to the VIDEO terminal (RCA ). The S-VIDEO and AV1 use the same group of audio input terminals. VTR without S-VIDEO terminal VTR without S-VIDEO terminal Y W R : Yellow (video) : White (audio L/MONO) : Red (audio R) To S-VIDEO output terminal R W To audio outputs To video output Y W R To audio outputs TV SET REAR Y W W R R To access the unit connected to these jacks, press TV/AV button until AV1 or SVHS appears on the screen. 8 External equipment connections To connect DVD input terminals The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk Player, etc. The TV set rear DVD Player, Laser Disk Player etc. :Direction of the signal W R G B :White (audio L/MONO) :Red (audio R, CR) :Green (Y) :Blue (CB) Y CB CR R L Signals To access the unit connected to these jacks, press TV/AV button until YUV appears on the screen. Notes: 1. Both the CR terminal and the audio R terminal are red for easy identification. Make sure they are correctly connected. 2. DVD and AV1 use the same group of audio input terminals. To connect the AV Outputs You can connect an audio system to the AV output jacks on the TV set rear to enjoy a high-quality sound from the audio system, or you can connect the AV output jacks to the VTR to record the program you like. The TV set rear To external input Signal Audio System Y W R Yellow (video) white (audio L) red (audio R) Signal To video input Y W Another VTR for recording Y W R R To audio inputs 9 Power on/off Turning on 1 2 0 Press the Power Switch on the TV set. If no picture appears on the screen and the standby indicator lights up, the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press standby ( ) button on the remote controller and the TV set is turned on. In STANDBY mode, you can also press Channel up/down button on the set to turn on the set. Turning off 1 2 Press the Power Switch on the TV set if you want to cut off the power completely. If you want to turn off the TV set temporarily, press the button. Special indication: Auto-Power-Off function: there are three kinds of AutoPower-Off function: 1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn off after a period of time. 2. Sleep-timer function 3. OFF timer function. 10 Selecting input signal Watching AV program This TV set provides AV input terminals for your convenient connection to VCR, DVD or other video equipment. TV/AV 1 To watch video program from AV inputs, press TV/AV button repeatedly until you see the appropriate input indicator on the screen. AV1 AV2 SVHS YUV 12 NOTE: AV1: Select AV1 when viewing the signals from the video equipment connected to the AV 1 IN terminals. AV2: Select AV2 when viewing the signals from the video equipment connected to the AV 2 IN terminals. SVHS: Select SVHS when viewing the signals from the video equipment connected to the S-VIDEO IN terminals. YUV: Select YUV when viewing the signals from the video equipment connected to the YUV IN terminals. Switching from AV to TV When the TV set is in AV mode, you can do the following to switch back to TV mode. Press TV/AV button repeatedly until the TV program appears. 11 Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. Auto Search Use the Auto Search function to preset all the active channels in your local area automatically. 1 Press MENU repeatedly to display Preset menu. CALL Note: if LOCK is set to ON in LOCK menu, the Preset menu can not be entered. How to setup or change lock, please refer to page 22 for details. Preset PROGRAM AUTO STORE SEARCH FINE TUNING PROG EDIT SKIP 1 ON 2 3 Press P+ or P- to select AUTO STORE. Press V+ to enter into the sub-menu. Press P+ or P- to select PROGRAM. Press V+ or V- to select an initial channel number from which you want to store (for example, program 1). Preset * AUTO STORE * PROGRAM 1 COLOR SYSTEM AUTO SOUND SYSTEM B/G START Menu control buttons P- to COLOR SYSTEM 4 Press item, select V+ or V- to select menu press a proper colour system (normally please select AUTO). AUTO STORE PROGRAM VHF-L 5 Press P- to select SOUND SYSTEM menu item, press V+ or V- to select your local area's sound system. 13 49 P- to select START 6 Presspress V+ to start automenu item, search. All active channels will be preset and stored into the memory automatically. After auto search, the set will return to the initial channel. During the process of Auto Search, pressing MENU will stop the process. * To exit the menu, press CALL button or repeatedly press MENU button. Note: Since this model's colour system and sound system have been preset properly in factory, therefore there is no need to set the colour/sound system before auto search, the above steps 4 and 5 may be skipped. 12 Tuning in If Auto Search can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of SEARCH. Manual Search TV/AV 1 Press MENU repeatedly to display Preset menu. P+ or P- to 2 Press V+ to e ...