AW-PH400P Pan/Tilt Control Panel AW-RP400N Cable Compensation Unit AW-RC400N Roll Unit AW-RL400G Indoor Pan/Tilt Head AW-PH400 AW-RP400 AW-RC400 AW-RL400 Before attempting to connect, operate or adjust this product, please read these instructions completely. AW-RL400 AW-RC400 AW-RP400 AW-PH400 Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. For CANADA This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE EQUIPMENT. CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR ANY OTHER CONFINED SPACE IN ORDER TO MAINTAIN ADEQUATE VENTILATION. ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING. Models AW-RP400, AW-RC400 only WARNING: TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS. Note: The rating plate (serial number plate) is on the bottom of the unit. 1 indicates safety information. 2 Safety precautions IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord form being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. Replace battery with part No. CR2032 only. Use of another battery may present a risk of fire or explosion. Caution--Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Keep the small memory cards such as the SD Memory Card out of reach of children. If swallowed, seek medical advice immediately. A warning that an apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 1 indicates safety information. 3 Contents Safety precautions ........................................................... 2 Operating precautions ...................................................... 5 AW-PH400 Indoor Pan/Tilt Head.................................. 6 Introduction ...................................................................... 6 Accessories ...................................................................... 6 Precautions for use .......................................................... 6 Installation precautions .................................................... 7 Parts and their function ................................................... 8 Installation ...................................................................... 12 $ Assembling the pan/tilt head .................................... 12 $ Setting the mounting direction switch ...................... 14 $ Setting the PCB switches ......................................... 15 $ Installing the pan/tilt head ........................................ 16 $ Mounting the camera ............................................... 17 $ Attaching the wire .................................................... 18 Replacing the consumable parts .................................. 19 Specifications ................................................................. 20 AW-RC400 Cable Compensation Unit........................ 38 Introduction .................................................................... 38 Accessories .................................................................... 38 Parts and their function ................................................. 39 How to mount the AW-RC400 in a rack ........................ 41 Specifications ................................................................. 42 AW-RP400 Pan/Tilt Control Panel .............................. 22 Introduction .................................................................... 22 Accessories .................................................................... 22 Parts and their function ................................................. 23 $ Front panel ............................................................... 23 $ Rear panel ............................................................... 26 Menu settings ................................................................. 28 $ Operation method ..................................................... 28 $ List of menu items and settings ............................... 29 How to mount the AW-RP400 in a rack ........................ 33 How to change the position of the connector panel ...... 34 How to replace the zoom switch ................................... 35 Replacing the consumable parts .................................. 36 AW-RL400 Roll Unit ..................................................... 43 Introduction .................................................................... 43 Accessories .................................................................... 43 Parts and their function ................................................. 44 Installation ...................................................................... 45 Specifications ................................................................. 48 Connections ................................................................... 49 Example of system configuration ................................. 51 Specifications ................................................................. 37 Operating procedures .................................................... 52 Cable specifications ...................................................... 58 4 Operating precautions Handle the units carefully. Dropping the units or subjecting them to strong impact may give rise to malfunctioning or accidents. Turn off the power before connecting or disconnecting the cables. Be absolutely sure to turn off the power before connecting or disconnecting the cables. Do not use the units outdoors. Maintenance Wipe the units using a dry cloth. To remove stubborn dirt, dip a cloth into a diluted solution of kitchen detergent, wring them out well, and wipe the units gently. Avoid using benzine, paint thinners and other volatile fluids. If a chemical cleaning cloth is to be used, carefully read through the precautions for its use. 5 Indoor Pan/Tilt Head AW-PH400 Introduction The stand-alone indoor pan/tilt head can be rotated through 300 degrees in the vertical direction and 400 degrees in the horizontal direction. Operations can be performed at high speeds of up to 90 degrees per second. Equipment such as a camera and lens with a total weight of 17.6 lbs (8 kg) can be mounted on the unit. The camera can also be rotated using the AW-RL400 roll unit available as an option. The shooting positions and settings for up to 50 positions can be registered as preset memory data. NOTE The AW-PH400 cannot be controlled from the AW-RP301, AW-RP305, AW-RP501, AW-RP505, AW-RP605 or AW-RP605A controller. In order to protect the environment when the pan/tilt head is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly. Accessories Rotary arm ..................................................................................................... 1 Camera mounting base ................................................................................ 1 Rotary arm and camera base mounting screws (with flat washers) M5!22 mm ............................................................................. 7 Camera cable ................................................................................................. 1 Tally lamp ....................................................................................................... 1 Tally mounting screws (M3!6 mm) ............................................................ 2 Blank panel for tally ...................................................................................... 1 Wire mounting screws (with flat washers, spring washers) M4!8 mm ............................................................................... 1 M4!6 mm ............................................................................... 1 Hexagon key wrench .................................................................................... 1 AC cable ......................................................................................................... 1 Rubber piece ................................................................................................. 1 Precautions for use The AW-PH400 uses a manganese dioxide-lithium battery (CR2032). Before discarding the pan/tilt head or its printed circuit boards, be absolutely sure to remove the battery. Be absolutely sure to dispose of the removed battery in accordance with the applicable domestic laws and regulations. Do not throw out the battery along with the general household garbage. For the procedure to remove the battery, refer to the section on replacing the battery in "Replacing the consumable parts" (page 19). Replace the lithium battery here. 6 Indoor Pan/Tilt Head AW-PH400 Installation precautions Do not install the unit on any of its sides. Avoid using the unit in the kitchen and other locations with lots of steam and oily vapors. Mount the camera on the pan/tilt head only when you have finished installing it. The maximum load-bearing capa ...