User manual PANASONIC CQ-C9901U - CQ-C9901

® WMA MP3 CD Player/Receiver with 512 Color OEL Display Récepteur/lecteur CD avec écran OEL de 512 couleurs et lecture WMA/MP3 Reproductor de CD, WMA y MP3/receptor con pantalla OEL de 512 colores ® CQ-C9901U WMA MP3 CD Player/Receiver with Full Dot Matrix Display Récepteur/lecteur CD avec afficheur matriciel et lecture WMA/MP3 Reproductor de CD, WMA y MP3/receptor con pantalla de matriz de puntos completa SRC CS CQ-C9901U/C9801U/C9701U CQ-C9801U/C9701U (CQ-C9901U) Operating Instructions Manuel d'instructions Manual de Instrucciones Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. ("PSC") Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 http://www.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 http://www.panasonic.ca TEXT YEFM285646A ND1104-1015 Printed in China Imprimé en Chine Impreso en China ¡Please read these instructions (including "Limited Warranty" and "Customer Services Directory") carefully before using this product and keep this manual for future reference. ¡Prière de lire attentivement ces instructions (y compris la "Garantie limitée" et le "Répertoire des services à la clientèle") avant d'utiliser ce produit et conserver ce mode d'emploi pour s'y référer ultérieurement. ¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura. Safety Information Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. Caution Observe the following cautions when using this unit. Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. Do not install the product where it is exposed to strong vibrations or is unstable. Installation Angle The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details. Warning This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death. Caution This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in injury or material damage. Do not insert or allow your hand or fingers to be caught in the unit. To prevent injury, do not get your hand or fingers caught in moving parts or in the disc slot. Especially watch out for infants. Warning Observe the following warnings when using this unit. The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system. Observe the following warnings when installing. Disconnect the lead from the negative (­) battery terminal before installation. Wiring and installation with the negative (­) battery terminal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specific procedures of battery terminal disconnection. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH. This unit is designed for use exclusively in automobiles. Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. Wear gloves for safety. Make sure that wiring is completed before installation. To prevent damage to the unit, do not connect the power connector until the whole wiring is completed. Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter) Do not expose the unit to direct sunlight or excessive heat. Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit. Observe the following cautions when handling the batteries for the remote control unit. Use only specified battery (CR2025). Match the polarity of the battery with the (+) and (­) marks Replace dead battery as soon as possible. Remove the battery from the remote control unit when not Insulate the battery (by placing them in a plastic bag or cov Dispose of the battery according to the local regulations. Do not disassemble, recharge, heat or short the battery. Do not throw a battery into a fire or water. ering them with vinyl tape) before disposal or storage. using it for an extended period of time. in the battery case. Do not use the product where it is exposed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days. Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system. Never use safety-related components for installation, grounding, and other such functions. Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or fixing the product or its accessories. Keep batteries and insulation film out of reach of infants. Batteries and insulation film can be ingested, so keep them out of the reach of infants. If an infant ingests a battery or insulation film, please seek immediate medical attention. Observe the following cautions when installing. Refer wiring and installation to qualified service personnel. Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. Protect the Deck Mechanism. Do not insert any foreign objects into the slot of this unit. Installing the product on the air bag cover or in a location where it interferes with airbag operation is prohibited. Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible. In case of battery leakage Thoroughly wipe the battery liquid off the battery case and If any part of your body or clothing comes into contact with If battery liquid comes into contact with your eyes, wash them with plenty of water and get immediate medical attention. battery liquid, wash it with plenty of water. insert new battery. Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Servicenter. Follow the instructions to install and wire the product. Not following the instructions to properly install and wire the product could cause an accident or fire. Do not use the unit when it is out of order. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign matter in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer. The remote control unit should not lie about in the car. If the remote control unit lies about, it could fall on the floor while driving, get wedged under the brake pedal, and lead to a traffic accident. Never install the product in a location where it interferes with your field of vision. Never have the power cord branched to supply other equipment with power. After installation and wiring, you should check the normal operation of other electrical equipment. The continuation of their using in abnormal conditions may cause fire, electrical shock or a traffic accident. Take care not to damage the leads. When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection. Refer fuse replacement to qualified service personnel. When the fuse burns out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service engineer. Incorrect replacement of the fuse may lead to smoke, fire, and damage to the product. In the case of installation to an airbag-equipping car, confirm warnings and cautions of the vehicle manufacturer before installation. Make sure the leads do not interfere with driving or getting in and out of the vehicle. Insulate all exposed wires to prevent short circuiting. Use the designated parts and tools for installation. Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunction or fire. Do not block the air vent or the cooling plate of the unit. Blocking these parts will cause the interior of the unit to overheat and will result in fire or other damage. 2 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U English 3 Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. Safety Information Before Reading These Instructions Caution THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. The following applies only in the U.S.A. Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX POWER SOURCE MENU SRC SET BAND MUTE SEL OO-OOOOO 1 RANDOM 2 SCAN 3 REPEAT 4 7 TUNE 5 8 0 6 9 TUNE DISP # NUMBER CAR AUDIO Operating Instructions (YEFM285646) Installation Instructions (YEFM293921) Owners Information Card Remote Control Unit (Includes a battery: CR2025) (EUR7641010) Instruction kit Q'ty: 1 set Q'ty: 1 Lock Cancel Plate Mounting Bolt Q'ty: 2 Q'ty: 1 Tapping Screw (5 mmø x 16 mm) Hex. Nut (5 mmø) Q'ty: 1 Q'ty: 1 Accessories Installation kit (YEP0FZ5701) Before Reading These Instructions Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family. CQ-C9901U WMA MP3 CD Player/Receiver with 512 Color OEL (Organic electroluminescence) Display CQ-C9801U/C9701U WMA MP3 CD Player/Receiver with Full Dot Matrix Display Trim Plate (YEFC05654): CQ-C9801U, C9701U (YEFC05655): CQ-C9901U Mounting Collar (YEFX0217222) Removable Face Plate Case (YEFA131646) Power Connector (YEAJ02871) Differences among 3 models This operating instruction manual is for 3 models CQ-C9901U, CQ-C9801U and CQ-C9701U. The difference among these models' are mentioned below. All screens and main body illustrations in this book represent CQ-C9901U unless otherwise specified. Features Models Q'ty: 1 Q'ty: 1 Q'ty: 1 Q'ty: 1 Display unit CQ-C9901U 512 Color OEL CQ-C9801U / CQ-C9701U Full Dot Matrix (Light Blue) Rear Support Strap (YEFG04019) Q'ty: 1 Notes: ¡ The number in parenthesis underneath each accessory part name is the part number for maintenance and service. ¡ Accessories and their parts numbers are subject to modification without prior notice due to improvements. ¡ Mounting Collar and Trim Plate are mounted on the main unit at shipment. 4 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U English 5 VOL Service and Warranty U.S.A. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/support or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY : 1-877833-8855 CANADA WARRANTY SERVICE For product operation and information assistance, please contact your Dealer or our Customer Care Centre at: Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca For product repairs, please contact one of the following: ·Your Dealer who will inform you of an authorized Servicentre nearest you. ·Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca ·A Panasonic Factory Servicentre listed below: Richmond, British Columbia Panasonic Canada Inc. 12111 Riverside Way Richmond, BC V6W 1K8 Tel: (604) 278-4211 Fax: (604) 278-5627 Mississauga, Ontario Panasonic Canada Inc. 5770 Ambler Dr. Mississauga, ON L4W 2T3 Tel: (905) 624-8447 Fax: (905) 238-2418 Calgary, Alberta Panasonic Canada Inc. 6835-8th St. N. E. Calgary, AB T2E 7H7 Tel: (403) 295-3955 Fax: (403) 274-5493 U.S.A. PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park Carolina, Puerto Rico 00985 This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to warrantor's Consumer Affairs Department at the addresses of the warrantor. PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY. Customer's Record Model No. Serial No. Dealer's No. Code No. Dealer's Address Date of Purchase PANASONIC AUTO PRODUCTS LIMITED WARRANTY LIMITED WARRANTY COVERAGE If your product does not work properly because of defects in materials and workmanship. Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as "the warrantor") will, for the length of the period indicated in the chart below, which starts with the date of original purchase ("warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair or replace will be made by the warrantor. Categories Parts Labor One (1) Year Two (2) Years Not Applicable Accessory Purchases: Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: npcparts@panasonic.com You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9 am to 8 pm, EST.) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (We accept Visa, MasterCard, Discover Card, American Express, and Personal Checks) For hearing or speech impaired TTY users, TTY : 1-886605-1277 Audio Components (except items listed below) One (1) Year MXE Series Audio Components (except items Two (2) Years listed below) Speakers One (1) Year Customer Services Directory Limited Warranty Lachine, Quebec Panasonic Canada Inc. 3075, rue Louis A. Amos Lachine, QC H8T 1C4 Tel: (514) 633-8684 Fax: (514) 633-8020 Accessories (in exchange for defective items) Ninety (90) Days Not Applicable CANADA Panasonic Canada Inc. 5770 Ambler Drive, Mississauga Ontario L4W 2T3 Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company Factory Servicenter: Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787) 750-4300, Fax (787) 768-2910 During the "Labor" warranty period, there will be no charge for labor. During the "Parts" warranty period, there will be no charge for parts. You must carry in or mail in your product during the warranty period. If non-rechargeable batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold "as is". A purchase receipt or other proof of the original purchase date is required for warranty service. CARRY-IN OR MAIL-IN SERVICE For Carry-In or Mail-In Service in the United States, call 1-800-211PANA (7262) or visit Panasonic Web Site: http://www.panasonic.com For assistance in Puerto Rico, call Panasonic Sales Company (787)750-4300 or fax (787)-768-2910. LIMITED WARRANTY LIMITS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials and workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred during shipment, failures which are caused by products not supplied by the warrantor, failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustment, maladjustment of consumer control, improper maintenance, improper antenna, inadequate signal reception or pickup, power line surge, improper voltage supply, lightning, modification, commercial use (such as use in hotels, offices, restaurants, or other business uses) or rental use of the product, or service by anyone other than the technician from Factory Servicenter or other authorized service centers, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the sevicer, and loss of media, data or other memory contents. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. PANASONIC PRODUCT LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in materials and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase. CAR AUDIO PRODUCT ­ ONE (1) YEAR, PARTS AND LABOUR (The labour to install or remove the product is not warranted) LIMITATIONS AND EXCLUSIONS This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty. This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of the original purchase date is required before warranty service is performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of the date of original purchase. 6 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U English 7 Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. Features Full Digital CD Receiver The CQ-C9901U/C9801U/C9701U uses Radio DSP for digital conversion and processing of FM/AM signals, and a digital amp to provide amplification of the digital data. With this technology, Panasonic achieves full digital processing of radio and CD signals from input to speaker output. This means faithful reproduction of the original sound. Note: If you enable CS Auto, the following functions are automatically disabled: SQ, POSITION, BASS/TREBLE, BALANCE/FADER, SUBWOOFER LEVEL, LPF, HPF, SBC-SW Contents English Français Español ¡Safety Information ¡Before Reading These Instructions ¡Service and Warranty ¡Features ¡Controls Layout ¡Preparation ¡General ¡Sound Control ¡Radio ¡CD Player ¡MP3/WMA Player ¡XM Tuner (XM DirectTM receiver) ¡Disc Changer (when CDs or MP3 discs are loaded) ¡Disc Changer (when DVDs or VCDs are loaded) ¡Audio Setting ¡Function Setting ¡Display Setting ¡Customize the Display (Customize Function) ¡Troubleshooting ¡Error Display Messages ¡Notes on Discs ¡Maintenance ¡Contents by Functions ¡Specifications CQ-C9901U/C9801U/C9701U 50 98 2 4 6 8 10 12 14 18 21 24 26 30 32 34 36 38 39 40 42 46 47 48 48 49 9 SQ (Sound Quality) You have six preset modes (FLAT, POP, ROCK, VOCAL, JAZZ, CLUB). You can customize your settings for these (except FLAT) and save them for instant recall. SQ9 (9-Band Sound Quality) Center frequency and level are adjustable in each of nine bands. This lets you fine tune sound quality for each genre to suit car-interior acoustics and your personal preferences. (a page 18) Radio DSP By digitally converting and processing FM/AM broadcast signals, this greatly reduces adjacent interference and multipath distortion. A radio's IF filter has the job of preventing neighboring broadcast frequencies from interfering with reception of your desired station. Panasonic's Radio DSP uses an advanced algorithm to perform this task with digital control. It maintains the optimum balance between noise suppression and sound quality by automatically adjusting the IF filter bandwidth in response to the changing interference characteristics as you drive. Full lineup of optional parts An optional XM DirectTM Receiver allows you to receive the XM radio service. A DVD changer instead of an XM DirectTM receiver is also connectable. (a page 30) ¡ Toll free number XM Tuner P/N: XMD1000 Call 1-800-XM-RADIO (96-72346) Extension cord P/N: XMDPAN100 Call 1-800-942-TERK (8375) The XM name and related logos are trademarks of XM Satellite Radio Inc. You can also enjoy watching DVDs if the optional DVD changer and display unit are connected. Notes: ¡A changer and an XM DirectTM receiver are not connectable at the same time. ¡ To connect the XM DirectTM receiver (XMD1000), it is required to use an optional extension cord (XMDPAN100) that is produced by XM exclusively for Panasonic products. Fully Motorized Front Panel A touch is all it takes to slide the front panel down for access to the disc slot. A three-stage tilt function permits viewing angle to be adjusted to 15, 25 or 35 degrees for optimum display visibility. New Features 256x64 pixel 512-color OEL display (CQ-C9901U only) Multicolored expression can be achieved thanks to OEL display. You can use this unit in your original way in collaboration with the customization function. Sound Control CS Auto (Circle Surround Automotive) CS Auto allows your car interior to change to a splendid audio room in a moment. Every speaker can be finetuned. (a page 18) *CS Auto, TruBass, FOCUS, SRS and symbol are trademarks of SRS Labs, Inc. CS Auto technology is incorporated under license from SRS Labs, Inc. Delightful sound space thanks to system buildup Headrest Monitor: CY-V7100U (Option) *XM DirectTM receiver XMD1000: manufactured by XM Satellite Radio (Option) CQ-C9901U/C9801U/ CQ-C9701U Head unit *DVD Changer CX-DH801U (Option) Sub-Woofer (Option) Stereo/Mono Power Amplifier (Option) *A changer and an XM DirectTM receiver are not connectable at the same time. 8 CQ-C9901U/C9801U/C9701U As Needed Each Source Common Controls Layout Note: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded) Number Buttons 8 0 ~ 9 POWER SOURCE SRC MENU SEL VOL # NUMBER Number RANDOM SCAN REPEAT SRC Source PWR Power SEL Select MENU POWER SOURCE MENU SRC SEL 4 SCAN 5 SET BAND SET BAND MUTE VOL MUTE CS CS Circle Surround Automotive SQ Sound Quality MENU DIM Dimmer y / 5 Pause/Play BAND SET APM Auto Preset REPEAT 6 BAND SET APM Auto Preset 1 RANDOM 2 SCAN 3 REPEAT 4 7 TUNE 5 8 0 6 9 TUNE DISP 7 9 Memory MUTE SBC·SW Super Bass Control·Subwoofer DISP Memory Main Unit SRC CS TUNE TRACK (FILE) 8 0 # NUMBER DISP Display CAR AUDIO P·SET (Preset) DISC (FOLDER) TUNE TRACK (FILE) One-touch operation is available for selecting a track playing style by use of [4] (RANDOM), [5] (SCAN), or [6] (REPEAT). (For a Folder/Disc playing style, hold down the same button for 2 sec. or more.) Functions only by remote control unit MUTE SBC·SW Super Bass Control·Subwoofer D·M Direct Memory DISP Display Release Direct Access A track (CD mode), disc (Disc changer), file, folder (MP3/WMA mode) and channel (XM) can be directly selected. Example: Track number 5 When Panel Opens Disc slot 1 Press [#] (NUMBER). 2 Press [5]. 3 Press [BAND] (SET). 10 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U Controls Layout 11 SRC Source PWR Power VOLUME PUSH SEL Select P·SET Preset DISC (FOLDER) TILT OPEN (eject) Remote Control Unit VOL Volume }:Up {:Down RANDOM English Preparation SRC First Time Power On 1 Set your car's ignition switch to the ACC (DEMONSTRATION) or ON position. ¡ Subwoofer level adjustment (a page 36) ¡ Subwoofer low pass filter (a page 36) The demonstration screen appears. Example: CQ-C9901U 1 Press [SRC] (Source) to select the AUX1 mode. (a page 16) play. Connecting an XM Direct receiver TM Preparation: ¡ Connect the optional XM DirectTM receiver (XMD1000). ¡ To connect the XM DirectTM receiver (XMD1000), it is required to use an optional extension cord (XMDPAN100) that is produced by XM exclusively for Panasonic products. For using the remote control, hold down [MENU] for 2 sec. or more. The demonstration screen is cancelled, and no more appears. Note: If you would like to turn on the power and make the demonstration message appear, hold down [SRC] (PWR: Power) for 4 sec. or more after turning off the power in other than the XM mode. Other Settings 2 Press [DISP] (Display). Getting Started It is required to sign up to become an XM Satellite Radio subscriber. After checking your XM Satellite Radio ID, sign up on the XM's website or by calling them. 3 Press [BAND] (SET) to adjust. : TV : Other devices (Default) Note: When using an external TV unit manufactured by a third party, select the TV mode. Preparation Before Initial Use Remote Control Preparation Pull the insulation film out from the backside of remote control gently. Warning ¡Keep batteries and insulation film out of reach of infants. If an infant ingests a battery, please seek immediate medical attention. Caution ¡ Remove and dispose of an old battery immediately. ¡ Do not disassemble, heat or short a battery. Do not throw a battery into a fire or water. ¡ Follow local regulations when disposing of a battery. ¡Improper use of a battery may cause overheating, an explosion or ignition, resulting in injury or a fire. 1 Check of XM Satellite Radio ID ¡ Write down the ID indicated on the lower right of your XM DirectTM receiver (XMD1000). ¡ Check the ID shown by tuning your XM Radio to channel 0. (a page 30) Insulation film 2 Activate the XM Satellite Radio Select either of the below to sign up. ¡ Web site: http://www.xmradio.com/activation ¡ Phone number: 1-800-XM-RADIO (96-72346) Note: Refer to the operating instructions for the XM DirectTM receiver for details. 4 Press [MENU] to confirm the adjustment. Battery Replacement Clock adjustment q Remove the battery holder Tough pointed object with the remote control unit Back side placed on a flat surface. q Stick your thumbnail into the groove, and push the Note: holder in the direction of ¡Battery Information: the arrow, and at the same time. w Battery Type: Panasonic lithium battery (CR2025) w Pull it out in the direction q (Included in the remote control) of the arrow using a Battery Life: Approximately 6 months under nor2 tough pointed object. mal use (at room temperature) w Put a battery in the case with (+) side facing up. e Put the case back. Note: Adjust the clock when "ADJUST" appears on the display. 5 Adjust the setting value. [[]: Adjusting minutes []]: Adjusting hours [}]: Forward [{]: Backward 1 Press [MENU] to display the menu display. (CLOCK ADJ) For using the remote control, hold down [MENU] for 2 sec. or more. 3 Security Function Setting The following functions are activated when the Security Function is ON. (a page 38) ¡ The security indicator blinks when removing the face plate. ¡ The alarm sounds and the message appears on the screen to warn you to remove the face plate at power off. 2 Press []] or [[] to display the DISPLAY menu. adjustment. 3 Press [{] to select "CLOCK ADJ". 4 Press [BAND] (SET) to confirm the dis- 7 Press [MENU]. control, hold down [MENU] For using the remote play. for 2 sec. or more. 6 Press [BAND] (SET) to confirm the Security Indicator 12 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U Preparation 13 2 Press [MENU] to display the menu dis- English When the power is switched on for the first time, a demonstration message appears on the display. Press [DISP] to change to regular mode. You may need to set the following depending on the devices to be connected. CS Connecting an AV device (TV, VTR) If you connect TV to AUX1 terminal, set the AUX1 setting to TV. Using Subwoofer General This chapter explains how to turn on or off the power, how to adjust the volume, etc. Power on Press [SRC] (PWR: Power). Notes: ¡ The opening screen appears. You can overwrite the opening screen (moving picture) with new one. (a page 40) ¡ When the power is switched on for the first time, a demonstration message appears on the display. Press [DISP] to change to regular mode. (a page 12) SRC CS Open/Eject When a disc is already loaded, the disc will automatically be ejected. Face Plate Motion (Open/Close, Tilt) SRC CS Power On/off (PWR: Power) (OPEN/CLOSE, TILT) Tilt Cautions: ¡ To avoid damaging the face plate, do not push it down or place objects on it while it is open. ¡ Do not pinch your finger or hand in the face plate. ¡ Do not insert foreign objects into the disc slots. ¡ For the following cases, the face plate automatically closes. Use caution not to catch your finger. ¡ After a lapse of 20 seconds ¡ When a disc is inserted ¡ When the face plate is removed (a page 14) The display angle changes among 4 levels as follows every time you hold down [ ] (TILT) for 1 sec. or more and release. Power off Hold down [SRC] (PWR: Power) for 2 sec. or more. Note: The ending screen appears. You can overwrite the ending screen (moving picture) with new one. (a page 40) You can remove the face plate to prevent it from being stolen. 3 Put the face plate in the case. Close Press [ ] (OPEN). Note: The last selected angle is maintained even after turning off the power. TILT 1 TILT 2 TILT 3 OPEN TILT OFF Removing Face Plate Removing/Mounting (VOLUME) 1 Turn off the power. (a page 14) (Release). 2 Press [ plate]disen(The face (Anti-Theft System) gages with a click when it is removed.) The face plate automatically closes in 5 seconds if it is open or tilted. The power is automatically turned off while the unit is active. 1 Slide the left side of the face plate in place. Volume Adjustment Mounting q Up w Down Setting Range: 0 to 40 Default: 18 Notes: ¡ The volume level can be set independently for each source. (For radio, one volume setting for AM, one volume setting for all FMs) ¡ The volume is not adjustable while an error display is on the monitor. (a page 46) until "click" is heard. Temporary Volume Off (Down) 2 Press the right end of the face plate Volume off (down) Press [ MUTE (ATT: Attenuation) ](MUTE). SRC CS Cautions: ¡ It is recommended to remove or mount the face plate when the plate is at the closed position. Do not remove or mount the face plate when the plate is in motion. ¡ This face plate is not waterproof. Do not expose it to water or excessive moisture. ¡ Do not remove the face plate while driving your car. ¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels. ¡ Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts. ¡ If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth. ¡ To avoid damaging the face plate, do not push it down or place objects on it while it is open. Cancel Press [ ](MUTE) again. Note: Volume-down range can be specified. (a page 38) 14 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U General 15 English Press [ ] (OPEN). General The source changes as follows every time [SRC] (Source) is pressed. CS SRC SRC CS At power-on: Radio FM1, FM2, FM3, AM (a page 21) Mode Display OFF All displays disappear in 5 seconds. Auxiliary (AUX2) When connecting CD Changer, DVD Changer (a page 32, 34) Folder hierarchy (MP3/WMA mode only.) Ordinary display + clock Player When loading CD (a page 24) When connecting XM DirectTM receiver (a page 30) Display Change XM Satellite Radio category (XM DirectTM receiver mode only) (DISP: Display) Ordinary display + graphic pattern Only still image Source Selection When loading MP3/WMA disc (a page 26) (SRC: Source) When connecting a device that is not compatible with this unit Auxiliary (AUX 1) When connecting a TV Only graphic pattern Ordinary display + still image Note: Please connect a CD changer or a DVD changer to AUX2. (a Installation Instructions) When connecting a device that is not compatible with this unit At power-off: Clock display (default) Off The dimmer level changes as follows every time you hold down [MENU] (DIM:Dimmer) for 2 sec. or more. Dimmer Control Brighter (Default) (DIM: Dimmer) SRC CS Medium Darker Note: This setting is not adjustable with the remote control. 16 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U General 17 English The display changes as follows every time [DISP] is pressed. Note: You can select a graphic pattern and a still image from originally stored data. (a page 39) You can also use your original images. (Customize Function a page 40) Sound General Control CS Auto (Circle Surround Automotive )