User manual PANASONIC CQ-CB9900U - CQ-CB9900

Removable Full Front MP3 WMA CD Player/Receiver with Full Dot Matrix Display and CD Changer Control CQ-CB9900U Operating Instructions Please read these instructions carefully before using this product and save this manual for future use. Safety Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. Precautions When Driving Keep the volume level low enough to be aware of road and traffic conditions. Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work. Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of our family. When Washing Your Car Do not expose the product, including the speakers and CDs, to water or excessive moisture. This could cause electrical shorts, fire, or other damage. CQ-CB9900U Removable Full Front MP3 WMA CD Player/Receiver with Full Dot Matrix Display and CD Changer Control CAUTION: THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. When Parked Parking in direct sunlight can produce very high temperatures inside your car. Give the interior a chance to cool down before switching the unit on. Accessories Item Remote Control Unit (YEFX9992663) Diagram POWER MENU Use the Proper Power Supply This product is designed to operate with a 12 V DC, negative ground battery system (the normal system in a North American car). SOURCE SEL NUMBER Q'ty 1 Item Screw Kit (YEP0FZ2105) Hex. Nut (5 mm) Tapping Screw (5 mmt16 mm) Mounting Bolt (5 mm) Diagram Q'ty 1 1 1 2 1 VOL MUTE # 2 SCAN 1 RAND 3 REP 4 7 6 5 8 0 6 9 5 BAND SET DISP Car Audio Disc Mechanism Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. Do not insert coins or any small objects. Keep screwdrivers and other metallic objects away from the disc mechanism and disc. Lithium Battery Instruction kit 1 Use Authorized Servicenters This product is made of precision parts. Do not attempt to disassemble or adjust any parts. Please refer to the Servicenter list including with this product for service assistance. Operating Instructions (YEFM284210) 1 Lock Cancel Plate Rear Support Strap (YEFG04019) NOTICE: This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: Warranty Card, etc. 1 set Removable Face Plate Case (YEFA131921) 1 Power Connector (YEAJ012010) 1 For Installation This product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. Note: The preset memory is cleared to return to the original factory setting when the power connector or battery is disconnected. Mounting Collar (YEFX0217039) 1 Trim Plate (YEFC05650) 1 Find the model number and serial number on either the back or bottom of the unit. Please record them in the space below and retain this booklet as a permanent record of your purchase to help with identification in case of theft. MODEL NUMBER SERIAL NUMBER DATE PURCHASED FROM 2 CQ-CB9900U CQ-CB9900U Note: The number in parenthesis underneath each accessory part name is the part number for maintenance and service. Accessories and their parts numbers are subject to modification without prior notice due to improvements. Mounting collar 1 and trim plate 7 are mounted on the main unit at shipment (page 50). CQ-CB9900U 3 Features Built-in AM/FM tuner for HD Radio (IBOC system*) broadcasts Digital broadcasts can now be heard along with conventional analog broadcasts thanks to the incorporation of the IBOC system that adds digital signals to the existing analog radio signals. As a result, during digital reception AM broadcasts take on a sound quality comparable to FM broadcasts, and FM broadcasts have a sound quality on a par with CDs. The station names, call signs, artists and song titles can also be displayed. *"IBOC" stands for In Band On Channel. It refers to analog digital simulcast broadcasting that uses the double sideband of the existing FM 400 kHz and AM 40 kHz broadcast carrier frequencies. SQ7 (7 bands Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. At SQ7, SQ presets 2 to 6 can also be finely adjusted as desired (page 32). What is HD RadioTM? Today's AM and FM radio is broadcast in analog, which has lower audio quality and is filled with static, hiss, pops and fades. Radio stations have begun a transformation to the world of digital using a new technology called HD RadioTM. Today's analog signals and the new HD Radio digital signals will be transmitted at the same time from AM and FM stations. The radios you use today will continue to function for years, however, new receivers are needed to hear the HD Radio digital signals broadcast from the stations. Using these new receivers, you can pick up the new HD Radio digital signals at the same place on the dial (106.7 KROQ will be digital 106.7 KROQ broadcasting in HD Radio, 710 WOR will be digital 710 WOR broadcasting in HD Radio). Your favorite HD Radio digital station will be right where you left it. Additionally, new HD Radio receivers will still pick up stations broadcasting in analog, so you don't need two radios. The benefits of digital far outweigh old analog technology. HD Radio makes radio "fun" again. FM digital will sound like a CD throughout the coverage area, and AM digital will sound like today's FM throughout the coverage area, both without the static, hiss, pops or fades that you've had to put up with for almost a century. While HD Radio will bring you pristine audio quality, it will also provide data services*. Both AM and FM HD Radio stations will transmit song and artist title, traffic updates, weather alerts, news reports and much more. For more information, visit www.hd-radio.com. Stay tuned! HPF (High Pass Filter)/LPF (Low Pass Filter) Genuine subwoofer system achieved thanks to HPF (High Pass Filter) and LPF (Low Pass Filter) CD Changer Control You can connect the optional CD changer unit. For details, refer to the operating instructions on the CD changer unit. 2 CD changers (option) can be controlled with this unit. To connect 2 CD changers to it, the dual CD changer selector CA-CD55U (option) is necessary. MP3/WMA Playback from CD-R/RW You can play your MP3/WMA (Windows Media Audio) files as well as regular CDs. With up to 10 to 12 times* the capacity of a conventional CD, a single MP3/WMA-encoded disc can keep you entertained throughout your entire journey. *Depending on bit rate. Large-sized Volume Control An large-sized rotary volume control that looks like one belonging to a Hi-Fi audio system is featured. *This unit supports text displays for the following items; station name, call sign, artist, song title. System Upgrade CQ-CB9900U Subwoofer (option) HD Radio is a trademark of iBiquity Digital Corporation. HD Radio broadcasts can be enjoyed only in those areas in the United States where the broadcasts can be received. This means that the HD Radio feature cannot be used outside the U.S. or in areas inside the U.S. where these broadcasts cannot be received. (as of December 2003) Before Reading these Instructions This can only be controlled through the main unit. Operations with neither mark can be performed either by the main unit or the remote control unit. Dual CD changer selector (CA-CD55U, option) Note: This unit does not support Sirius satellite radio. You cannot connect CD changer and Sirius receiver using the dual CD changer selector (CA-CD55U, option). This can only be controlled through the remote control unit. CD changer (CX-DP880U, option) Stereo power amplifier (option) CQ-CB9900U 4 CQ-CB9900U 5 Preparation Remote Control Unit Back side Lithium battery (included) Clock Setting Subwoofer Preparation: Connect the subwoofer and the amplifier (option) (page 60). Subwoofer level setting: You can change the subwoofer level (page 34). The 12-hour system is used for the clock. Turn your car's ignition key to the ACC or ON position. Press [SOURCE] (PWR). When the power is switched on for the first time, a demonstration appears on the display. Press [DISP] (display) to change to regular mode (page 10). 1 Press [MENU]. Press and hold [MENU] for more than 2 seconds. 2 Press [$] to select "DISPLAY". 2 Position B 3 Battery holder Subwoofer low pass filter setting: You can select the upper limit frequency of the sound from subwoofer (page 34). 1 3 Press [#] to select "CLOCK ADJ". Position A Battery Installation 1 Remove the battery holder. Pull the holder out at position B while pushing position A as indicated. 2 Install the battery on the battery holder. 3 Insert the battery holder back into its original position. 4 Press [SET]. 5 Setting. Hours: Battery Notes Battery type: Panasonic lithium battery (CR2025) (included) Battery life: Approximately 6 months under normal use (at room temperature) Caution: Improper use of the battery may cause overheating, an explosion or ignition, resulting in injury or a fire. Remove and dispose of an old battery immediately. Do not disassemble or short the battery. Do not throw a battery into a fire. Keep the battery away from children to avoid the risk of accidents. Follow local regulations when disposing of the battery. 1 Press [$]. The Minutes display hilights. 2 Press ["]: Put forward 3 Press [#]: Put back 6 Complete. Press [SET]. Note: Press and hold ["] or [#] to change numbers rapidly. CQ-CB9900U 1 Press [%]. The hour display hilights. 2 Press ["]: Put forward 3 Press [#]: Put back Minutes: 6 CQ-CB9900U 7 Contents Safety Information ................................................................................. Page 2 Precautions.................................................................................................... 2 Audio Settings....................................................... 32 Volume, bass/treble, SQ adjustment, balance/fader, subwoofer level, subwoofer low pass filter (LPF), high pass filter (HPF) Accessories ........................................................... 3 Features ................................................................4 What is HD Radio ? TM Display Settings..................................................... 36 Background display selection (GRAPHIC PATTERN), contrast, clock adjustment Before Reading these Instructions ................................ 5 Preparation ........................................................... 6 Remote control unit, subwoofer Function Settings ................................................... 38 Mute/attenuation, security function Troubleshooting..................................................... 40 Clock Setting ......................................................... 7 Preliminary steps, if you suspect something wrong, troubleshooting tips, error display messages, maintenance, product servicing, fuse General ............................................................... 10 WELCOME Notes on Discs ...................................................... 48 Notes on CD/CD media (CD-R, CD-RW, CD-ROM), notes on CD-Rs/RWs Power, source, volume, mute/attenuation, dimmer, rear speakers as sub-woofers (super bass control subwoofer/SBC-SW), SQ (Sound Quality), display change Radio ................................................................. 14 FM Anti-Theft System................................................... 49 Remove the removable face plate, install removable face plate, security indicator, panel removal alarm Radio mode, band, reception mode, tuning, seeking, station preset, preset station calling, text display Before Disc Playback............................................... 18 Available discs, disc insert, when CD is in the player, disc eject Installation Guide................................................... 50 CD Player ............................................................ 19 Track selection, fast forward/fast reverse, pause, scan play, direct track selection, text display, random play/repeat play Electrical Connections ............................................. 56 Wiring diagram, upgrading the system 1, upgrading the system 2, speaker system connection MP3/WMA Player ................................................... 22 MP3/WMA Folder selection, file selection, fast forward/fast reverse, pause, text display, scan play, folder scan play, direct file selection, direct folder selection, random play/repeat play, notes on MP3/WMA Specifications ....................................................... 61 CD Changer Control ................................................ 28 CD changer mode, disc selection, track selection, fast forward/fast reverse, scan play, disc scan play, CD changer selection, direct disc selection, random play/repeat play 8 CQ-CB9900U CQ-CB9900U 9 General [MUTE] (Mute/attenuation) [VOLUME] (SBC-SW) [MENU] (DIM) [SOURCE] (Power/source) [MUTE] (Mute/attenuation) (SBC-SW) POWER MENU Dimmer SOURCE SEL NUMBER [VOL "] VOL MUTE # 2 SCAN 1 RAND 3 REP [VOL #] (Volume) Press and hold [MENU] (DIM) for more than 2 seconds to change dimmer level setting as follows. Brighter (default) 4 7 6 5 8 0 6 9 5 BAND SET DISP [DISP] (Display) Medium Car Audio [SOURCE] (PWR: Power) Point the remote control unit at the remote control signal sensor. [DISP] (Display) Darker Power Turn your car's ignition key to the ACC or ON position. ACC ON Source Press [SOURCE] to change the source. Radio (page 14) Volume [VOL "]: Up [VOL #]: Down Up (Super Bass Control Subwoofer/SBC-SW) Rear Speakers as Sub-Woofers You can utilize the rear speaker connected to the built-in amplifier as Sub-Woofers that output only bass. (Default: OFF) Press and hold [MUTE] (SBC-SW) for more than 2 seconds. OFF (default) ON: Press [SOURCE] (PWR). CD player (page 19) When a CD is in the player. Down Setting range: 0 to 40 (default: 18) Note: The volume level can be set independently for each source (for radio, one volume setting for AM, one volume setting for all FMs). OFF: Press [SOURCE] (PWR) again and hold for more than 1 second. Press [SOURCE] (POWER) again and hold for more than 1 second. or MP3 player (page 22) When a MP3 data disc is in the player. ON lights. Note: When ON has been selected, the settings resulting from the adjustments performed at the subwoofer level and subwoofer low pass filter settings are reflected in the output. Depending on the speakers used and the type of music played, it may not be possible to achieve a satisfactory effect. Note: After turning off the ignition key, a security message is displayed, and the panel removable alarm that reminds you to take the panel is activated. (When security function is set to on, page 38) Demonstration: When the power is switched on for the first time, a demonstration appears on the display. Press [DISP] (display) to change to regular mode. or WMA player (page 22) When a WMA data disc is in the player. Mute/Attenuation ON: OFF: Press [MUTE]. Press [MUTE] again. CD changer control (page 28) When an optional CD changer is connected. You can select mute or attenuation (page 38). No sounds. (default) Decrease the volume by 10 steps. AUX (page 57) Note: To display the demonstration again, press and hold [SOURCE] for more than 4 seconds when turning power on. 10 CQ-CB9900U CQ-CB9900U 11 General (continued) [SQ] (Sound Quality) POWER MENU SOURCE SEL NUMBER VOL MUTE # 2 SCAN 1 RAND 3 REP 4 7 6 5 8 0 6 9 5 [1] to [6] (SQ preset buttons) [DISP] (Display) [DISP] (Display) BAND SET DISP Car Audio SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. At SQ7, SQ presets 2 to 6 can also be finely adjusted to suit the acoustic characteristics inside the car and the user's preference (page 32). Press [SQ] to select a sound types as follows. SQ7 lights (except FLAT). FLAT Flat frequency response not emphasize. (default) Display Change Note: Press [DISP] (display) to return to the regular mode. If no operation takes place for more than 5 seconds, the display returns to the regular mode. Setting of SQ, bass/treble and volume are influenced one another. If the influence mentioned above causes distortion to the audio signal, readjust bass/treble or volume (page 32). After pressing [SQ] on the main unit, you can also select a sound type by pressing the preset buttons [1] to [6]. Press [DISP] (display). When Power is ON Mode display When Power is OFF Clock display Folder hierarchy display (MP3/WMA only) Display and light off Mode and Moving picture display/ SA display (page 37) Moving picture/ SA display (page 37) Note: Displays before adjusting the clock (page 7). Set the background display (GRAPHIC PATTERN) in a separate procedure (page 36). "­­:­­" will appear before adjusting the clock on the right corner of the mode display. ROCK Sharp and dynamic sound. Powerful deep bass and turgescent treble. Mode and clock display POP Prevention of excessive equalizing and capability to cover wide variety of music. Listener-friendly and crisp sound. Highlighted vocals that are apt to be overwhelmed by instrumental sound. Sound with emphasis on sharpness of high-hat and echo of saxophone. Jazz-specific deep sound. Reproduction of realism being in a club. Display and light off VOCAL JAZZ CLUB 12 CQ-CB9900U CQ-CB9900U 13 Radio This lights when the broadcast station now being received is an HD Radio station (one which is airing a digital broadcast). [%] [$] (TUNE) POWER MENU Seeking [SOURCE] SOURCE SEL NUMBER VOL MUTE # 2 SCAN When the reception mode is "AUTO": 1 Every time you press and hold [D/A] for more than 2 seconds, Seeking mode is switched as follows; Auto seeking (default) [%] [$] (Tuning) 1 3 REP [BAND] RAND 4 7 6 5 8 0 6 9 5 [SOURCE] [D/A] (Digital*/Analog) *This indicates HD Radio. Stereo indicator This lights when a digital broadcast is This lights being received in AUTO mode. when a stereo broadcast is This lights when reception received. mode is "AUTO". [BAND] BAND SET DISP Digital seeking 2 Press and hold [%] or [$] for more than 0.5 seconds, then release. Seeking will start. Car Audio 1 Radio Mode Press [SOURCE] to select the radio mode. Radio mode display Band Frequency 3 Reception Mode Press [D/A] to select the reception mode. 4 Tuning [$]: Higher frequency [%]: Lower frequency Note: Even when the AUTO mode is established and the HD indicator is lighted: · The sound may not switch over to digital if the program concerned (such as a live baseball game) is being broadcast in real time. · Analog sound will be output if the reception is poor. In the AUTO mode, analog sound is output immediately after the frequency has been tuned in. When listening to analog sound, the sound quality will be better in the ANALOG mode. When "Auto seeking" is selected: The tuning automatically stops at the stations, whether analog or digital, whose signals can be received, and the signals from those stations are received. When "Digital seeking" is selected: The tuning automatically stops only at the stations which are airing digital broadcasts, and the signals from those stations are received. The seeking operation is repeated if no digital broadcasts are being aired. D·SEEK indicator This lights when digital seeking is selected. AUTO mode** ("AUTO" lights.) Selects analog or digital reception (HD Radio) automatically. (default) ** Identifying whether a broadcast is digital or analog in the AUTO mode 2 Band Press [BAND]. FM1 When "DIGITAL" is displayed: This means that digital sound is now being output. (It is displayed while a digital broadcast is being received.) When "ANALOG" is displayed: This means that analog sound is now being output. (It is displayed while an analog broadcast is being received.) FM2 When the reception mode is "ANALOG": Press and hold [%] or [$] for more than 0.5 seconds, then release. Seeking will start. FM3 ANALOG mode Selects analog reception only. AM Note: Digital seeking may take some time. Seeking may not stop at stations which are scheduled to go all-digital broadcasts in the future. 14 CQ-CB9900U CQ-CB9900U 15 Radio (continued) [SQ] (SCROLL) [BAND] (APM: Auto Preset Memory) ["] [#] (Preset station) POWER MENU Text Display SOURCE SEL NUMBER VOL MUTE # 2 SCAN While a digital station is received and the mode display (page 13) is displayed, the display is switched by one step as shown below each time [DISP] (display) is held down for at least 2 seconds. [1] to [6] (Preset station) [BAND] (Auto Preset Memory) 1 RAND 3 REP 4 7 6 5 8 0 6 9 5 ["] [#] (Preset station) [DISP] (Display) Station name* (default) BAND SET DISP [DISP] (Display) Car Audio Station Preset Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections. Song title*/ Artist name* Auto Preset Memory (APM) Automatically save stations with good reception in the preset memory. 1 Select a band (page 14). 2 Press and hold [BAND] (APM: Auto Preset Memory) for more than 2 seconds. [AUTO mode (Auto seeking)] The stations that broadcast digital signals are stored in the memory in sequence with the station featuring the best reception first and starting with the highest preset number whereas the stations that broadcast only analog signals are stored in the memory in sequence starting with the lowest preset number. [AUTO mode (Digital seeking)] The stations that broadcast digital signals are saved in sequence with the one featuring the best reception first. (This may take some time.) [ANALOG mode] The 6 stations with good reception will be automatically saved in the memory under preset number 1 to 6. Once set, the preset stations are sequentially scanned for 5 seconds each (scanning). Manual Preset Memory Manually save a station in the preset memory. 1 Select a band and frequency (page 14). 2 Press and hold ["] or [#] until the preset number blinks. 3 Press ["] or [#] to select the preset number (1 to 6). 4 Press and hold ["] or [#] for more than 2 seconds to memorize. The display blinks once, and a receiving station is saved in the memory. Preset Station Calling 1 Select a band (page 14). 2 Press ["] or [#]. Press [1] to [6]. Mode display 1 Select a band and frequency (pages 14-15). 2 Press and hold [1] to [6] for more than 2 seconds to memorize. Note: When pressing [MENU] (pressing and hold [MENU] for more than 2 seconds on the remote control unit) in radio mode, the following display appears. This is because radio mode does not have any menu settings. * Press and hold [SQ] (SCROLL) for more than 2 seconds to have an another circle scroll when the text is displayed. Note: If any of the following screens are displayed, the display will not be switched even when the above operation is performed. · Mode and Moving picture display/SA display · Moving picture display/SA display · Mode and clock display · Display and light off There is a case that text is not always displayed while a digital station is received. Note: Analog sound is heard during scanning. 16 CQ-CB9900U CQ-CB9900U 17 Before Disc Playback This instructions on this page are followed for both CD-DA playback and MP3/WMA playback. CD Player Do not watch the scroll display while driving. [SQ] (SCROLL) Available Discs CD-DA Disc Insert 1 Press [OPEN]. 2 Insert a disc. [OPEN] [:]/[9] (6/5) (Track selection/fast forward/fast reverse) MP3/WMA [<] (Eject) Label side Close. [SOURCE] Disc indicator lights when the disc is loaded. [DISP] (Display) [BAND] (;/1: Pause) (SET) Caution: 3q (8 cm) CD is not available for this unit, so do not insert it. Do not use irregularly shaped discs. Do not use discs that have a seal or label attached. Be sure to close the front panel while CD playback. To avoid damaging the front panel, do not push it down or place objects on it while it is open. Do not pinch your finger or hand in the front panel. Do not insert foreign objects into the disc slot. Note: The power will be turned on automatically when a disc is loaded. A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally. (For example, it may be reproduced without sound.) Refer to the section on "Notes on MP3/WMA" (page 26) and "Notes on Discs" (page 48). Track Selection Playback will start automatically after recognizing the data of the loading disc. It may take some time to start playing. Note: Do not insert a disc when the disc indicator lights because a disc is already loaded. [9]: Next track [:]: Beginning of the current track For the previous track, press twice. Text Display Press and hold [DISP] (display) for more than 2 seconds in the mode display. *Disc/track title (default) Fast Forward/Fast Reverse Press and hold [9] (5): Fast forward [:] (6): Fast reverse Release to resume the playback. Mode display Pause (Example: CD-DA) Disc indicator Press [;/1]. Press [;/1] again to cancel. * Press and hold [SQ] (SCROLL) for more than 2 seconds to have an another circle scroll when a title is displayed. Note: "NO TEXT": Displays when there is no text. Scan Play The first 10 seconds of each track is played in sequence. Press [5] (SCAN). lights. Press [5] (SCAN) again to cancel. When CD is in the Player Press [SOURCE] to select the CD (MP3/WMA) player mode and playback starts. Disc Eject Direct Track Selection 1 Press [OPEN]. 2 Press [<] (eject) and take the disc. 3 Close the front panel manually. Example: track number 10 1 Press [fl]. 2 Press [1] [0]. 3 Press [BAND] (SET). Note: To suspend direct selection, press [DISP] (display) or [fl]. Random, scan and repeat play are canceled once [fl] is pressed. [SOURCE] [0] to [9] (Track number) [5] (Scan play) [6] [5] (Track selection/fast forward/fast reverse) [BAND] (Pause) (SET) POWER MENU SOURCE SEL NUMBER VOL MUTE # 2 SCAN 1 RAND 3 REP [fl] (Number) 4 7 6 5 8 0 6 9 5 BAND SET DISP [DISP] (Display) Car Audio 18 CQ-CB9900U CQ-CB9900U 19 CD Player (continued) Random Play/Repeat Play [SEL] (MENU) ["] [#] (Submenu) [MENU] [SET] POWER MENU SOURCE SEL NUMBER VOL MUTE # 2 SCAN 1 RAND 3 REP 1 Menu 1 Press [MENU] during CD playing. Press and hold [MENU] for more than 2 seconds during CD playing. 2 Press [%] or [$] to select "CD·DA". 2 Submenu Press ["] or [#]. 3 Set Press [SET]. Note: Press [MENU] to return to the regular mode. [DISP] (Display) [%] [$] [BAND] (SET) 4 7 6 5 8 0 6 9 5 ["] [#] (Submenu) [%] [$] [DISP] (Display) BAND SET DISP Car Audio Direct Operation ON Select RANDOM All the available tracks play in a random sequence. lights. Random Play Default: OFF POWER MENU SOURCE SEL NUMBER VOL OFF Cancel Select "CD·DA". Press [4] (Random play). MUTE # 2 SCAN 1 RAND