Detailed instructions for use are in the User's Guide.
Network Camera
Operating Instructions
Model No.
KX-HCM10
Please read this manual before using and save this manual for future reference. Panasonic Network Camera Site: http://www.panasonic.com/netcam for customers in the USA or Puerto Rico
Operating Instructions
Introduction
Thank you for purchasing a Panasonic Network Camera. Check the following items when unpacking. Network Camera Operating Instructions Getting Started AC Adaptor Camera Stand Setup CD-ROM Screws Washers For operation assistance: · · Call 1-800-272-7033 Refer to the Panasonic Network Camera Site http://www.panasonic.com/netcam -- 1 pc. -- 1 pc. -- 1 pc. -- 1 pc. -- 1 pc. -- 1 pc. -- 2 pcs. -- 2 pcs.
2
Operating Instructions
Trademarks · Netscape and Netscape Navigator are either registered trademarks or trademarks of Netscape Communications Corporation in the U.S. and other countries. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries. Microsoft, Windows, Windows NT, MS-DOS, Hotmail and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Screen shots reprinted with permission from Microsoft Corporation.
· · ·
· ·
All other trademarks identified herein are the property of their respective owners. Network Camera Memo
Attach your purchase receipt here. For your future reference
Date of purchase Serial Number (Found on the rear side of the main unit) Name and address of dealer MAC Address
[For assistance, please call: 1-800-272-7033]
3
Operating Instructions
IMPORTANT SAFETY INSTRUCTIONS When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.
1. 2. 3. 4. 5. 6. 7. 8.
Read and understand all instructions. Keep these instructions. Heed all warnings. Follow all instructions. After taking away the dust on the Fixed Focus Lens, wipe the Fixed Focus Lens with lens cleaning paper. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. Protect the AC adaptor cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit. Only use attachments/accessories such as stands, tripods, and brackets specified by the manufacturer.
9. Do not touch the unit or the AC adaptor during lightning storms. 10.Unplug the unit when unused for long periods of time. 11.Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as AC adaptor cord or plug is damaged, the unit does not operate normally, or has been dropped. SAVE THESE INSTRUCTIONS
4
Operating Instructions
Table of Contents
1 Product Introduction...................................................... 7
1.1 Getting to Know Network Camera .................................................... 8
1.1.1 Main Features............................................................................................. 8 1.1.2 System Requirements .............................................................................. 10 1.1.3 Authentication--System Security Feature ................................................ 11
1.2 1.3
Included Accessories...................................................................... 12 Camera Feature Locations ............................................................. 14
1.3.1 Front View................................................................................................. 14 1.3.2 Rear View ................................................................................................. 15 1.3.3 Bottom View.............................................................................................. 15
2 Network Camera Setup ................................................ 16
2.1 2.2 2.3 2.4 Installation Procedure..................................................................... 17 Network Camera Configuration Type ............................................. 18 How to turn on Network Camera for Installation............................. 20 Network Parameters....................................................................... 21
2.4.1 Preparing the Network Parameters for Network Camera ......................... 21 2.4.2 Setting IP Address of the PC in [Type 4] Configuration Type................... 24
2.5 2.6 2.7
Proxy Server Setting....................................................................... 26 Simple Installation using the Setup CD-ROM................................. 28 Network Camera Access from the Internet..................................... 32
3 Network Camera Screen and Setup Window............. 35
3.1 3.2 3.3
3.3.1 3.3.2 3.3.3 3.3.4
Network Camera Flow Chart .......................................................... 36 Top Page ........................................................................................ 37 Single Camera Screen ................................................................... 40
Using Operation Bar ................................................................................. 42 Using Pan/Tilt Operation........................................................................... 43 Setting Preset Positioning and Home Positioning .................................... 44 Viewing Buffered Image Screen ............................................................... 46
3.4 3.5
Multi-Camera Screen...................................................................... 48 Setup Page..................................................................................... 49
3.5.1 Go to Top Page ........................................................................................ 53 3.5.2 Network..................................................................................................... 54 3.5.3 Name/Time ............................................................................................... 58 [For assistance, please call: 1-800-272-7033] 5
Operating Instructions
3.5.4 3.5.5 3.5.6 3.5.7 3.5.8 3.5.9 3.5.10 3.5.11 3.5.12 3.5.13 3.5.14 3.5.15
Security: Administrator ..............................................................................60 Security: General User ..............................................................................62 Top View Image ........................................................................................64 Image Transfer..........................................................................................66 Camera Setup ...........................................................................................78 Multi-Camera.............................................................................................81 External Output Control...........................................................................83 Indicator Control ......................................................................................84 Status ......................................................................................................85 Restart.....................................................................................................86 Update Firmware.....................................................................................87 Reset to Factory Default..........................................................................90
4
4.1 4.2 4.3 4.4
Technical Guides ......................................................... 91
Mounting......................................................................................... 92 Interfacing to the External I/O ......................................................... 94 ASCII and ISO-8859-1 Character Table......................................... 96 Maintenance ................................................................................... 98
5
5.1 5.2 5.3 5.4 5.5 5.6
Specifications and Troubleshooting.......................... 99
Network Camera Reset Procedure--Default Settings.................. 100 Default Settings List...................................................................... 101 Specifications ............................................................................... 107 Troubleshooting............................................................................ 109 Confirmation of Network Camera Operation ................................ 115 FCC and Other Information .......................................................... 117
Index ................................................................................. 119
6
Operating Instructions
Section
1
Product Introduction
[For assistance, please call: 1-800-272-7033]
7
Operating Instructions
1.1
1.1.1
Getting to Know Network Camera
Main Features
Easy installation Setup CD-ROM simplifies the installation. Insert the Setup CD-ROM and autorun program should start the application automatically. This program automatically finds Network Camera on the network. High-Speed Motion JPEG Network Camera has an integrated web server. Motion JPEG displays up to 15 frames per second, if the network provides enough bandwidth. To conserve bandwidth, JPEG - Regularly Refresh can be selected from Top Page. Image Resolution, Image Quality, Refresh interval, Limit time of Continuous Motion JPEG and On the Air time features can control the image field. Remote Pan/Tilt Operation Pan/Tilt operation can move the lens 120° horizontally and 45° vertically. This movable lens allows you to see the situation widely where the object is. Operation bar has Preset Positioning and Home Positioning features to register fixed positions. Clicking the preset buttons moves the lens to the preset positions you want to view. Single Camera screen has Click to Center feature too. The object on Single Camera screen can be centered by clicking on the image directly. Multi-Camera Screen Using Multi-Camera screen you can simultaneously view up to four Network Cameras at various locations. Clicking on each Camera Name switches to the Single Camera screen from the Multi-Camera screen. Multi-Client Access Network Camera allows up to 10 users to view Motion JPEG image simultaneously. Users can access the Top View Image screen (Single Camera/ Multi-Camera screen) from their own locations. Note that as the number of users simultaneously connected to Network Camera increases, the overall motion performance will decrease.
8
Operating Instructions
External I/O (Input/Output) The external sensors/devices such as a door sensor can be connected via the External Sensor Input. The external sensors/devices are customer provided. The alarm/timer trigger can activate the Image Transfer feature, which can send the images via e-mail or FTP (File Transfer Protocol). External Device Control Output can send a signal to activate the external devices such as a light around Network Camera. Update Firmware If new firmware is released, you can download the latest program from Network Camera Technical Support Site. Installation is easy and fast. Refer to page 87 for details. Authentication Authentication window requires you to enter the administrator/general user ID and password. Password security can prevent unregistered users/intruders from accessing your image from their web browsers. Refer to Section 1.1.3 Authentication--System Security Feature for details. Multi-Language Display Top Page, Single Camera screen and Multi-Camera screen can be displayed in English (US), English (UK), French, German, Italian, Spanish or Japanese. All Setup windows are also changed when selecting English (US), English (UK) or Japanese.
[For assistance, please call: 1-800-272-7033]
9
Operating Instructions
1.1.2
System Requirements
The PC (Personal Computer) and the network must meet the following technical specifications for Network Camera to work properly. Item Operating System Description Microsoft® Windows® 95, Microsoft Windows 98/SE Microsoft Windows 2000, Microsoft Windows Me Microsoft Windows NT® 4.0, Microsoft Windows XP Network Protocol Interface TCP/IP network protocol installed. (HTTP, TCP, UDP, IP, DNS, ARP, ICMP) 10/100 Mbps Ethernet® card for your network connection
Web browser*1 Internet Explorer 5.0 or later/Netscape Navigator® 4.7x. (Not included on the Setup CD-ROM). *1 Network Camera image is not displayed correctly in the Netscape® v6.x. Use Netscape Navigator v4.7x. Refer to Panasonic Network Camera Site http://www.panasonic.com/netcam for the latest information on web browsers. Note Pentium® II 300 MHz or greater CPU is recommended to prevent performance degradation.
10
Operating ...
